Forum General Discussions Re: Measuring conductivity and/or resistivity Posted by: Csaba Hollo on July 08, 2008 at 03:09: In Reply to: Re: Measuring conductivity and/or resistivity posted by : José Raminhos , E-mail: Address, on May 28, 2008 at 02:58 : ----------- Start Original Message ----------- : there is an equipment (sigmatest) made by Foerster that is exactly for electrical condutivity measurment on non ferrogmagnetic metals : you can find that equipmente at: : http://www.foerstergroup.com/Maintenance/conductivity_measure3.html : hope that will help you : José Raminhos ------------ End Original Message ------------ In addition to the testing device, I would advise you to purchase a set of NIST traceable standards in the conductivity range you are working in. Follow Ups: Post a Followup: Name: E-Mail: Subject: Comments: ----------- Start Original Message ----------- : : there is an equipment (sigmatest) made by Foerster that is exactly for electrical condutivity measurment on non ferrogmagnetic metals : : you can find that equipmente at: : : http://www.foerstergroup.com/Maintenance/conductivity_measure3.html : : hope that will help you : : José Raminhos : In addition to the testing device, I would advise you to purchase a set of NIST traceable standards in the conductivity range you are working in. ------------ End Original Message ------------ Optional Link URL: Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP Page Title: is important! Optional Image URL: http://www....gif Attention! Please click the button only once. This may take a moment to process Forum General Discussions Help