DETERMINATION DES MODULES
ELASTIQUES DE MATERIAUX SOUMIS A
HAUTE TEMPERATURE PAR
UNE METHODE ULTRASONORE
Marie-Hélène Nadal, Cyril Hermerel, Christian Gondard
CEA, DRMN/MOS/MFC, Valduc, 21120 Is-sur-Tille, France
RESUME
Une technique ultrasonore a été développée afin de mesurer les constantes élastiques des
matériaux à haute température. Deux dispositifs sont utilisés jusqu'à 1000°C et 3000°C
respectivement avec des cinétiques de chauffage différentes. Il s'agit d'une méthode
ultrasonore par contact utilisant des lignes à retard afin de préserver les capteurs de
l'élévation de température. La mesure de temps de vol des ondes ultrasonores dans
l'échantillon est réalisée selon différents parcours correspondant aux transmissions et
réflexions ce qui permet d'exclure tout effet de gradient thermique dans les lignes à retard.
Ces dispositifs sont utilisés pour des matériaux composites ou métalliques. L'incertitude sur
les constantes élastiques est de l'ordre de 1 %.
ABSTRACT
An ultrasonic device has been developed to measure the elastic constants of materials at high
temperature. Two set-up have been used up to 1000°C and up to 3000°C respectively,
according to different heating kinetics. A contact impulse method is used, with wave-guides to
protect the ultrasonic transducer from the thermal exposure. The measurement of time-of-flight
of the ultrasonic waves in the specimen is performed on different paths corresponding to
transmissions and reflections which allows to exclude the effects of temperature gradients in
wave-guides. These devices were used for metallic and composite material. The accuracy on
the elastic constants is in the order of 1 %.l.
Source: Abstracts of the 1997 COFREND Congress on Nondestructive Testing, September 22-26, 1997 - Nantes France. Contact: cofrend@worldnet.fr.