EMISSION ACOUSTIQUE EN PALIER DE
CHARGE D'UN COMPOSITE VERRE - RESINE
DETERMINATION D'UN CRITERE
D'ACCEPTATION/REJET D'UNE STRUCTURE
G.HENRIO - P.RECOLIN
(DCN/CESMAN - LA MONTAGNE - France)
RESUME
Après mesure de la contrainte à rupture et caractérisation du niveau significatif
d'endommagement du matériau considéré, les décroissances de l'émission acoustique en
paliers de charge, lors d'un chargement selon code CARP, ont été modélisées.
Ces lois permettront, lors de l'épreuve étagée d'une structure, d'appréhender pour chaque
zone surveillée et par palier de charge, la contrainte réelle atteinte et donc le coefficient de
sécurité résiduel par rapport à la contrainte d'endommagement et/ou de rupture.
ABSTRACT
Acoustic emission of a steady loaded glass reinforced plastic - Determination of a structure qualification criterion
After measurement of the breaking stress and the significant level of damage on the studied
material, the decreases of acoustic emission during load holds, according with the CARP code
stressing sequence, have been modeled.
These laws will allow for a step by step pressure tested structure, for each watched area and
each stage, to reach the real apllied stress and so the residual safety factor against damaging
and/or breaking loads.
Source: Abstracts of the 1997 COFREND Congress on Nondestructive Testing, September 22-26, 1997 - Nantes France. Contact: cofrend@worldnet.fr.