DEVELOPPEMENT D'UN INSTRUMENT DE
TOMOGRAPHIE 3D A RAYONS X
APPLICATION AU CONTROLE DE ROUES DE
TURBINE EN CERAMIQUE
1 T. Lhermitte, 2 M. Antonakios, 3 J.M. Casagrande, 4 L. Garguet-Duport, 2 P. Rizo
1 RENAULT - Boulogne Billancourt - France
2 LETI - (CEA - Technologies Avancées) - Grenoble - France
3 INTERCONTROLE - Rungis - France
RESUME
Un tomographe 3D à rayons X en géométrie conique, dédié à l'examen santé-matière de
roues de turbine en céramique Si 3 N 4 , est présenté. L'instrument développé par le
CEA/LETI est constitué d'une source de rayons X de 225kV, d'un détecteur bidimensionnel
basé sur un écran convertisseur couplé à une caméra CCD et d'un système mécanique
permettant de mettre en rotation la roue de turbine. La limite de détectabilité des défauts
est de 0.15 mm à travers 50 mm de céramique Si 3 N 4 et la résolution après reconstruction
est de 0.3 mm. Tous les défauts détectés peuvent être dimensionnés et localisés.
ABSTRACT
Development of a 3D X-Ray cone beam tomography system for the inspection of ceramic turbine wheels
A three-dimensional X-ray cone beam tomograph dedicated to the nondestructive examination
of radial Si 3 N 4 ceramic turbine wheels is presented. The instrument developed by CEA/LETI
consists of a 225 kV maximum voltage X-ray source, a two-dimensional X-ray detector based
on a converter screen coupled to a cooled CCD camera and a mechanical system allowing the
turbine wheel to be rotated. The limit of flaw diameter detectability of the instrument is 0.15
mm through 50 mm of Si 3 N 4 ceramic and the geometric resolution after reconstruction is
0.3 mm. All detected flaws may be sized and localized.
Source: Abstracts of the 1997 COFREND Congress on Nondestructive Testing, September 22-26, 1997 - Nantes France. Contact: cofrend@worldnet.fr.