FUSION DE DONNEES ET AUTOMATISATION
DU DIAGNOSTIC POUR LE CONTROLE PAR
MICROSCOPIE ACOUSTIQUE DE SOUDURE
SPFDB DE TITANE.
M. DESSENDRE, F. THEVENOT, A. LIOT, H. TRETOUT, A. EXMELIN
(DASSAULT AVIATION CDE VELIZY-VILLACOUBLAY France)
RESUME
La nécessité d'augmenter les performances en diminuant le coût et la masse des structures
métalliques, a conduit DASSAULT AVIATION à la fabrication de l'empennage "canard"
par le procédé de formage superplastique et de soudage par diffusion des alliages de titane
(SPF-DB). Au cours du développement du "canard", la nécessité d'analyser la qualité du
soudage tôles - ferrure est apparue. Un contrôle ultrasonore non destructif de ces interfaces
est effectué. Il fournit une cartographie représentative du taux de grains soudés. Le bureau
d'étude impose des critères de soudage sur une zone désignée de l'interface. L'objectif du
projet a été de réaliser un outil de traitement d'image afin d'assister le contrôleur dans son
diagnostic. Cet outil a nécessité la mise en oeuvre de la fusion de données END et CAO pour
piloter les traitements et fournir au bureau d'étude une représentation du contrôle dans son
environnement de travail.
ABSTRACT
NDT and CAD data fusion for diagnosis assistance and diffusion bonding improvement
The need to improve performances of aircrafts by reducing cost and weight of metallic
structures has led to increase interest in superplastic forming and diffusion bonding titanium
(SPF/DB) alloy processes. The production of heavily loaded flying SPF/DB components for
Dassault Aviation's fighters has required quantitative characterization of the diffusion bonds.
The particular problems which arise in SPF/DB processing of titanium alloys at the
development stage can induced defects at the bond-line which take the form of voids of
different sizes. We present the developments carried out in Dassault Aviation in order to
quantify automatically the percentage of bonded aera.to assist the development of the SPF/DB
processes. The works include developments in image processing and CAD/CAM data fusion.
Source: Abstracts of the 1997 COFREND Congress on Nondestructive Testing, September 22-26, 1997 - Nantes France. Contact: cofrend@worldnet.fr.