CONTROLE NON DESTRUCTIF PAR
FOCALISATION ULTRASONORE ADAPTATIVE
(SYSTEME FAUST).
S. Mahaut, O. Roy, Ph. Benoist,
CEA/CEREM, Saclay, France,
G. Cattiaux,
IPSN/DES/SAMS, Fontenay-aux-Roses, France.
RESUME
Le système FAUST a été développé par le Commissariat à l'Energie Atomique (CEA) avec
le soutien de l'Institut de Protection et de Sûreté Nucléaire (IPSN), pour améliorer les
performances du contrôle non destructif par ultrasons en termes de caractérisation de
défaut et d'adaptabilité à différentes configurations de contrôle. Basé sur un contrôle
dynamique de traducteurs multi-éléments, ce système est complété par un modèle théorique
utilisé pour calculer la géométrie optimale des traducteurs multi-éléments en fonction de la
configuration du contrôle, et déterminer les paramètres pour la maîtrise du faisceau
ultrasonore. Cet article est consacré aux capacités du système pour la caractérisation des
défauts. Des essais de caractérisation par rotation du faisceau, ainsi qu'une technique de
reconnaissance de forme basée sur la distribution d'amplitude reçue à la surface du
traducteur sont présentés.
ABSTRACT
Non destructive testing using ultrasonic adaptive focusing
The FAUST system was developed by CEA (French Atomic Energy Commission), supported by
the French Institute for Nuclear Protection and Safety (IPSN), to improve the performances of
ultrasonic non destructive testing in terms of adaptability to various control configuration and
defect characterization. This system relies on the use of optimized phased arrays connected to a
multi-channel acquisition system. A diffraction model is used both to design arrays of
optimized shape and to calculate theoretical acoustical laws. This paper deals with the system
capabilities for defect characterization. The first technique uses 3D beam steering around the
defect to discriminate plane defect from volumic defect, while the second uses the information
received by each part of the transducer to characterize the defect shape.
Source: Abstracts of the 1997 COFREND Congress on Nondestructive Testing, September 22-26, 1997 - Nantes France. Contact: cofrend@worldnet.fr.