AMELIORATION DU CONTROLE DES TUBES DE
GV AVEC LA SONDE A EXCITATION
TOURNANTE
H. Schepens*, M. Pigeon*, J. Reuchet**, D. Boulanger**
* CEA/CEREM - Saclay, France
** IPSN/DES - Fontenay aux Roses, France
RESUME
La SET est une sonde CF multibobinage destinée à l'amélioration du contrôle des tubes de
GV des REP 900 MW. Elle est équipée de 16 capteurs ponctuels disposés sur une même
circonférence. Trois configurations spécifiques d'émission/réception, regroupées en un
masque sollicitant 5 capteurs voisins, sont commutées électroniquement d'un capteur à
l'autre pendant le déplacement axial de la sonde. Les résultats obtenus avec un premier
prototype sur des défauts étalons en mono-fréquence (240 kHz) à la vitesse de 200 mm/s
sont très prometteurs. Ils indiquent que la SET détecte bien des défauts ponctuels et des
fentes circonférentielles externes de faible profondeur et d'étendue limitée.
Abstract
Improvement in steam generator tubing control using the SET rotating excitation probe
The Eddy current rotating exciting probe (SET) is a multiple-coil probe aiming at the
improvement of NDT of steam generator tubes in a pressurized nuclear plant (900 MW). It is
made of 16 coils located at the same circumference. Three modes of transmit-receive signals
applied to 5 neighbouring coils are switched on the 16 coils during the axial displacement. At
240 kHz and 200 mm/s axial speed, the SET detects correctly the outside circumferential
cracks as shallow as 30 % of tube thickness. Moreover, localized flaws are better detected than
using the bobbin type probe.
Source: Abstracts of the 1997 COFREND Congress on Nondestructive Testing, September 22-26, 1997 - Nantes France. Contact: cofrend@worldnet.fr.