COPENHAGEN 26-29 MAY 1998
7th European Conference on Non-destructive Testing
- NDT.net
- ECNDT'98 main
ECNDT '98 - PROCEEDINGS online
Access to Abstracts (August) and Full-Text Papers. Updated each Month.
Reliability and Validation
AbstractAuthor Full-Text
309C. Waites, J. Whittle - AEA Technology, UK. The Current Status of Performance Demonstration and Evaluation Developments.
310P. Lemaitre, B. Eriksen - EC, The Netherlands. J. Whittle, AEA Technology, UK. Lessons Learned from the ENIQ Pilot Study.
311R. Paussu - IVO Power Engineering. P. Särkiniemi - VTT Manufact. Technology. Finland. Capability Demonstration for Vendor Selection and Inspection Qualifications.
312L. Gomersson - SQC Swedish NDT Qualitifaction Centre, Sweden. *Two Years of Experience from NDT Qualifications in Sweden.
313T. Sjö - ABB, Sweden. Experiences of Qualifications Performed 1997 by TRC.
314T.D. Koblé - Sulzer Innotec, Switzerland. Ultrasonic Procedures for Inspection Qualification.
315M. Bieth - EC, The Netherlands. C. Birac, R. Comby - EDF, France. G. Maciga, ENEL, Italy. In-Service Inspection Capability of Steam Generator Tubes.
316J. Sagnier, G. Delsarte, L. Peltier - Intercontrôle, France. SELFIC, a Calibration System for Eddy Current Instruments.
317R. Heumüller, G. Guse, B. Rückelt - Siemens Power Generation Group, Germany. Qualification and Validation of new SAPHIR-UT-technology.
318M. Wall, F.A. Wedgwood - AEA Technology, UK. Economic Assessment of Inspection - The Inspection Value (IVM) Method.
319C. Nockemann, C. Bellon, S. Nickisch - BAM, Germany. The Principle of Modular Optimization and Validation of a NDT System Applied to the Problem of Radiographic Testing of Tube Welds.
320M. Darboux, J.-M. Dinten, F. Retraint, J.J. Gagelin - LETI, CEA. N. Heymes a.o., FBFC. France. *X-Rays Inspection of Fuel Rods Welds: Evaluation of a Quantitative Approach.
321S.E. Kruger - Uni. Libre de Bruxelles, Belgium. I.C. da Silva, J.M.A. Rebello - Federal Uni. of Rio de Janeiro, Brazil. Factorial Planning of Experiments Applied to Reliability Assessment in Discontinuity Mapping by Ultrasound.
322P. Lemaitre, S. Crutzen - EC, The Netherlands. F. Champigny - EDF, France. U. Sandberg - Forsmarks NPP, Sweden.European Network for Inspection Qualification: A Status Report.
323H. Wirdelius - SAQ Kontroll, Sweden. The Application of Mathematical Modelling of Ultrasonic NDT in the Qualification Process.
324O. Førli - DNV, Norway. Nordtest Guidelines for Determination, Description and Use of NDE Reliability Data.
325M. Wall, F.A. Wedgwood - AEA Technology, UK. Modelling of NDT Reliability (POD) and Applying Corrections for Human Factors.
Top
|7th ECNDT| - |NDTnet|
© 1998 by R. Diederichs info@ndt.net