International Conference on Advanced Materials - 1998
Hurghada, Egypt
15 - 18 December 1998 |  ICAC '98 Homepage Conference Report by X.E. Gros |
International Conference on Advanced Materials - 1998
Hurghada, Egypt
15 - 18 December 1998 | ICAC '98 Homepage Conference Report by X.E. Gros |
| Abs- tract |
 Full-Texts
| Author | |||||||||||||||||||||||||
| 1 | | Detection of disbonds and voids in thick composite, sandwiched plates by real-time phase-shifted electronic holography | D. Borza; INSA Rouen, Dept. Mecanique, Place Blondel, BP 08, 76131 Mont-Saint-Aignan, France
| 2 | Non-destructive evaluation of the effect of ply orientation on the impact resistance of thermoplastic toughened thermoset resin polymeric matrix composite | X.E. Gros, K. Takahashi; Research Institute for Applied Mechanics (RIAM), Kyushu University, 6-1 Kasuga Koen, Kasuga-shi 816-8580, Japan
| 3 | On the efficiency of current NDT methods for impact damage detection and quantification in thermoplastic toughened CFRP materials | X.E. Gros*, M.-A. de Smet**, K. Takahashi*; *Research Institute for Applied Mechanics (RIAM), Kyushu University, 6-1 Kasuga Koen, Kasuga-shi 816-8580, Japan. **GIE NDT Expert, France
| 4 | Extraction of histories of damage micromechanics in unidirectionalcomposites by acoustic emission technique | Y. Dzenis, J. QianUniversity of Nebraska Lincoln, Dpt. of Engineering Mechanics, W315 Nebraska Hall, Lincoln, NE 68588-0526, USA
| 5 | Embedded optical fibre sensors for the permanent monitoring of filament wound pressure vessels | Joris Degrieck* and Wim De Waele**, * Department of Mechanical Construction and Production, University of Ghent. ** WTCM, Belgian Research Centre for the Metalworking Industry St.-Pietersnieuwstraat 41, B9000 Gent, Belgium
| 6 | Static Loading And Low Velocity Impact Characterization Of Graphite/peek Laminates | F. Aymerich, P. Priolo, D. Vacca; Dept of Mechanical Engineering - University of Cagliari, Piazza d'Armi - 09128 Cagliari (ITALY) - Fax: 39 70 6755717
| 7 | Damage assessment in an SMC composite by means of ultrasonic techniques | F. Aymerich, S. Meili; University of Cagliari / Dipartimento di Ingegneria Meccanica Piazza d'Armi - 09123 Cagliari (Italy)
| | ||||||
| NDTnet |