Abstract:
Measurements of the ultrasonic sound speed of thermosetting resins and composites can be used as an in-process cure monitoring technique. Ultrasonic measurements have an advantage over other in-process techniques in that ultrasonic sensors do not make contact with the part (thus leaving no imbedded sensor or witness mark) and can make true bulk measurements of the part. A new commercially available ultrasonic cure monitoring system has been developed which easily enables ultrasonic measurements to be made in compression molding, resin transfer molding, and autoclave processes. Advancements in ultrasonic sensor technology enable the self-contained ultrasonic sensor to easily installed in a mold and maintain good coupling to the part during thermal cycling to 260 C. Data is presented showing the change in ultrasonic sound speed during the compression molding of a graphite-epoxy prepreg. The data shows a good relationship to the ionic conductivity and resistivity data collected via dielectric cure monitoring.
Source: Proceedings of the 'NDE applied to Process Control of Composite Fabrication' - Conference, 1-2 Oct 1996 St. Louis, Missouri. Publisher and Organizer: Nondestructive Testing Information Analysis Center (NTIAC) Texas Research Institute Austin, Inc. Austin, Texas [http://www.ntiac.com] [Buying the Proceedings]
| |UTonline| |Abstract Database| |Access to all Abstracts of the Conference | |