 NDTnetWCNDT '96 - New Delhi Table of Contents |  |
NDT| 740 | Donald O. Thompson and Lester W. Schmerr, Jr | Quantitative Model-Based Approaches To Inspectability And Reliability
| 559 | Farley, J. M | Quality And Reliability Through NDT
| 741 | S. Fakuda | Nondestructive Evaluation And Its New Role In The Coming Century
| 745 | Baldev Raj* and C. Rajagopalan** | Artificial Intelligence To Maximise Contributions Of Nondestructive Evaluation To Materials Science And Techonology
| 592 | Morio One | International Standardization In NDT - Iso/tc 135
| 12 | Gerd Dobmann | Nondestructive Characterization Of Materials For Lifetime Management Of Industrial Products
| 13 | M. Kroening | Benefits And Challenges Of The Integration Of Nondestructive Testing Into Material And Process Engineering
| 22 | R. Halmshaw | The Controversy Over The Choice Of A Good Radiographic Technique For Weld Radiography
| 44 | V. V. Klyuev | Development Of Nondestructive Testing And Technical Diagnostics Is A Basis Of Safety
| 109 | Dr. George Teodoru, VDI-Expert | NDT-Methods For Concrete On The Move Into The 21st Century
| 115 | E. Grinzato, P. G. Bison, S. Marinetti, G. Minotto and V. Vavilov* | Improving Thermal NDT Performance By Using Image Processing Techniques
| 286 | Thomas Varga | Quantitative Evaluation Of Material Defects By Non Destructive Testing
| 376 | R. Seshadri | Robust Gloss Parameters ( |  And  N) For Integrity Assessment Of Pressure Components
729 | G. H. Thanki | On-Line Corrosion Monitoring Of Chemical Process Plants
| 730 | Ramesh B. Parikh | Status Of Indigenous Manufacture Of NDT Equipments And Consumables
| 95 | Joseph SAMMAN | The Role Of NDE For The Maintenance Of The Nuclear Power Plants In France
| 246 | Hou Ben. Ding, Hong. Li, et al | A Portable High Resolution Compton Backscatter Scanning Instrument
| 375 | V. Balasubramaniyan, S. C. Chetal, A. Selvaraj and P. V. Kumar | In-Service Inspection And Monitoring Of Prototype Fast Breeder Reactor Components
| 465 | R. K. Puri, Manjit Singh and G. Govindarajan | Techniques To Measure Deflection Of Pressure Tubes In Indian Pressurised Heavy Water Reactors (Phwrs)
| 511 | R. Subbaratnam, A. Baskaran and M. Palaniappan | Evaluation Of Overlay On Stainless Steel By NDE Methods
| 535 | S. Rajendran & M. S. Ramakumar | In-Situ Inspection Of Grooves In Reactor Tube Sheet Using A Remotely Operated Cast Impression Taking Device
| 670 | R. K. Mistry, B. Laxminarayana, R. K. Srivastava, J. Shankar Kumar, M. Surya Prakash, N. Saratchandran, V. A. Chandramouli, Dr. T. S. Krishnan, and K. Balaramamoorthy | 25 Years Of NDE In The Fabrication Of Zircaloy Mill-Products And Nuclear Fuel
| 122 | Philippe Rizo, Michel Antonakios, Patrick Lamarque* | Solid Rocket Motor Nondestructive Examination Using Tomosynthesis Methods
| 208 | R. Samuel, M. V. Rao, T. S. Sriranga, P. S. Nair and A. V. Patki | Automated NDE Systems For Spacecraft Structural Components
| 356 | A. Jayachandran, K. G. Appaiah, Keshavamurthy, C. N. Raghavan, A. S. Salehittal | NDT Applications In Aerospace Industries-Specific To Aeroengines
| 392 | S. R. Ravishankar and C. R. L. Murthy* | Modelling Drill Induced Delaminations In Composite Laminates
| 383 | S. N. Chakravarty and A. K. Mandal | Ultrasonic Examination Of Rolling Stock Axles - Indian Railways Experience
| 560 | B. W. O. Shepherd, W. Nuding+, S. Lawson*, H. Godinot**, D. Flotte*** and J. M. Farley | NDT Methods For Flaw Detection During Welding
| 34 | Ainul Akhtar and David Kung | Nondestructive Evaluation Of Cylinders For The Storage Of Natural Gas And Hydrogen Fuels On Automobiles
| 438 | R. Murali, U. Ramamurthy and B. K. Bhasin | Testing And Analysis Of Mov'S
| 88 | Paul Schneider and Dr. Albrecht Maurer | Special Features And Differences In Non-Destructive Testing Of Precision Tubes And Api-Tubes
| 334 | Ma Xuerohg | Comprehensive Utilization Of NDT On Distinguishing Defect'S Character Of Repair Welding Welded Seam
| 634 | K. A. Gopal, N. Raghu, N. G. Muralidharan, P. V. Kumar and K. V. Kasiviswanathan | Development Of Calibration Standard For Non-Destructive Testing Of Small Diameter Tubes
| 595 | Raj N. Singh and James E. Webb | Characterization Of Thermal Shock Damage In 2-D Woven Fiber- Reinforced Ceramic Composites
| 318 | Raja Ram Yadav | Nondestructive Characterization Of Vitreous Silica
| 281 | Alan Sibbald, Charles Fairfield, & Abdelmadjid Bensalem | Flaw Detection And Sizing In Masonry Arch Bridges
| 335 | He Xiutang Liu Yifei Lin Zhenwang* | New Non-Destructive Testing Technique Using Example On The Concrete Quality Inspect
| 11 | Shao Zebo, Song Shubo and Gao Xiaoli | Research On The Measurement Of Edge Stress In Pressure Vessel
| 18 | Shizong Chen | One Fatigue Crack Source And Its Nondestructive Testing
| 23 | Ward D. Rummel | Overview Of Nondestructive Evaluation (NDE) - Capabilities Assessments And Probability Of Detection (Pod) Concepts
| 48 | Pi-Kurn Chen | Application Of NDT In The Steel Making Plant
| 55 | P. Revindran, M. P. R. Panickar, V. K. Ravindran, B. C. Bhaumik | An Assessment Of Minimum Gap Required Between The Faces Of Tight Cracks For Reliable Detection By Ultrasonic Shear Waves - A Fracture Mechanics Approach
| 96 | K. K. Jha & T. K. Agrawal & Mr. B. R. Malhotra | Quality Problems In Heavy Steel Forgings And Role Of NDE
| 261 | A K Nandi | Time Delay Estimator For Surface Profiling
| 327 | B. Nouailhas, P. Wagner, I. Molinero**, J. L. Lesne*, V. Durbec* | A Study Of The Probability Of Detection By A Statistical Approach
| 349 | S. P. Srivastava, A. Manjunatha, M. Jayandranath | Quality Of Seal Discs-Through NDT
| 597 | M. Clerico, D. Cuppini*, G. Cataldo* and L. Giroletti** | NDT Observation And Analysis Of Crater-Shaped Damage
| 602 | V. K. Sinha | Manufacturing Defects And Their Effect On Type Of Failure In Castings And Forgings - Some Case Studies
| 662 | *T. M. Gurieva, **V. T. Pronyakin, **N. K. Rybakov | Nondestructive Testing Of Materials And Welded Joints In Iter Applications
| 667 | V. I. Pokhmurskiy, R. K. Melekhov | Initiation Of Stress Corrosion Cracks In The Stainless Steels In Chloride, Caustic Solutions And Weather
| 114 | S. Kasinathan, P. Annamalaisamy, P. Sundaramoorthy and V. Thyagarajan | On The Application Of In-Situ Metallography And NDT In The Detection Of Micro Fissures In Stainless Steel Welds
| 166 | Shuwo Chen, Tariq Sattar, Aamir Khalid and Bryan Bridge | Design, Development And Performance Evaluation Of A New Pneumatically Powered Versatile Wall-Climbing Robotic NDT System Suitable For Hazardous Environments
| 167 | Shuwo Chen, Tariq Sattar, Aamir Khalid and Bryan Bridge | Effects Of Changes Of The Centre Of Gravity Of A Scanning Arm On The Dynamic And Static Performance Of A Versatile Wall-Climbing Robotic NDT System
| 186 | D K Deka | Non Destructive Testing Of Coke Chambers Of Dubbs Coking Unit At Digboi Refinery
| 188 | R. N. Sharma and S. Singh | Cracking Of Weld In Reactor R - 1 Of Coker - A
| 323 | Sara Keller and Dave Medina, Carlos Pairazaman* | Requirements Vs Real Life Implementation Of Quantified Eddy Current Inspection Of Gas Turbine Engine Components
| 371 | Delawar Bakht | Complexity Evaluation In NDT Application For Inservice Inspection And Energy System Maintenance In Bangladesh
| 405 | Fahmy M. Haggag and K. Linga Murty* | Nondestructive Measurement Of Key Mechanical Properties In Welded Components Using A Novel Stress-Strain Microprobe System
| 409 | C. Mishra and S. Muncherji | Expert System For Wear Debris Analysis - A Powerful Tool For Condition Monitoring
| 461 | V. N. Bindal | Evaluation Of The Aging And Conservation Of The Ancient Temple Of Lord Jagannath Using NDT Techniques
| 587 | C. Kannan, S. N. Pandey and A. K. Mehta* | Damage Assessment And Retrieval Of A Crank Shaft Of Seized Heavy Duty Engine Through In-Situ Metallography
| 709 | Sanjay Bose, and V. K. Rajan | Condition Monitoring And Life Assessment Of High Voltage Machines Through Non-Destructive Testing
| 717 | V. Jeyaraj | Non-Destructive Testing Of Antiquities In Government Museum, Madras
| 8 | Valery A. Rudnitsky, Alexander V. Rabtchevich | Dynamic Indentation Method For The Estimation Of Mechanical Properties Of Materials
| 47 | N. A. Orlov, V. N. Kovalsky, A. N. Kovalenko, U. V. Bogatenkov** | Computer Vibrodiagnostic Application: Oil Pumping Station Equipment
| 97 | T. K. Mitra | Instrtumentation System For Railway Track Vibration Detection By Piezoelectric Crystals
| 112 | C. Sujatha* and S. Thanooja** | The Use Of Modal Parameters In Non-Destructive Evaluation Of Damage In Composite Structures
| 223 | Chien-Ching Ma and Kuo-Cheng Huang | Transient Analysis Of An Interface Crack Subjected To Dynamic Body Force In Dissimilar Isotropic Materials
| 420 | P. K. Ramakrishna Rao, P. Prasad, M. Vasanth Kumar and V. Shantha | On-Line Wear Monitoring Of Single Point Cutting Tool Using Vibration Techniques
| 684 | Klara Shiloh* and W. A. Ellingson** | Non Destructive Evaluation Of Nickalon/sic Composites By Vibration Analysis
| 369 | R. J. Pardikar, N. Ayodhi and P. S. Subrahmanyam | Regaining Lost Capacity Of Aging Boiler Components By Performance Evaluation And Residual Life Assessment: An Exciting Challenge For NDE
| 417 | F. F. Giginyak and A. A. Lebedev | The Advancement Of Methods For Assessing Structural Materials Life Under Cyclic Loading At A Complex Stress State
| 437 | S. K. Agrawal | In-Situ Metallography - Feedback From Personal Experience
| 540 | B. B. Rupani and R. K. Sinha | Sliver Sample Scraping Technique For Application In Determination Of Residual Service Life Of Tubular Components
| 588 | Dr. Sova Bhattacharya, S. B. Mohapatra and S. N. Pandey* | Fitness For Service Evaluation Of Fire Damaged Refinery Equipment
| 596 | M. Clerico, L. Giroletti* and C. Marelli* | NDT Techniques For Diagnosis And Life Extension Of Industrial Plants
| 625 | N. Raghu, N. G. Muralidharan, T. Jayakumar and K. V. Kasiviswanathan | In-Situ Metallography For Damage Assessment And Life Extension In Power Plant - A Few Case Studies
| 610 | K. M. M. Rao | Image Processing For Medical Applications
| 146 | D. Datta, N. N. Kishore*, P. Munshi* | Automated Nondestructive Evaluation Of Composite Specimen By Fractal Analysis
| 654 | Shuichi Fukuda | Separating Of Images Of Nature And Artifacts Using Fractal Dimension
| 364 | H. B. Patel | Building Intelligent Nondestructive Testing And Evaluation Systems By Digital Signal Processing Techniques
| 601 | V. K. Sinha and V. B. Reddy | An Expert System For Defect Analysis
| 705 | Sekhar Tangirala*, and Asok Ray | Stochastic Modeling Of Fatigue Cracks For Real-Time Monitoring &Amp; Prognostics
| 720 | Vinay Dayal | Non-Destructive Evaluation: Statistical Approach
| 260 | A C McCormick and A K Nandi | Rotating Machine Condition Monitoring Using Neural Networks
| 359 | R. S. D. Wahidabanu and M. A. Panneer Selvam | NDE Of Electrical Insulation Using Genetic Algorithm Based Artificial Neural Nets
| 431 | S. Kumudha, Y. G. Srinivasa and R. Krishnamurthy | Application Of Artificial Neural Network And Fuzzy Logic For Nondestructive Testing In Machining
| 358 | R. S. D. Wahidabanu, M. Gopalakrishnan and M. A. Panneer Selvam | Quality Control Of Power Apparatus Through Non-Destructive Test Measurements And Evaluation
| 370 | T. N. Gangadharan and P. S. Subrahmanyam | Improvement Of Non-Destructive Examination Effectiveness On Pressure Vessels With Quality Assurance
| 515 | K. Shanmugam, R. Chandramohan and M. K. Ramamurthy | Quality Assurance Experience In The Manufacture Of Pfbr Reactor Vessel During Technology Development Work
| 562 | J. C. Pandey, G. Kaur, A. S. Prasad and O. N. Mohanty | Quality Assessment Of Rolls: Use Of Ultrasonic Back-Scatter Technique
| 590 | R. Visweswaran | Global Information System And Internet For Science And Technology
| 396 | C. Mani, Hiroomi Homma, Yasuhiro Kanto | Study On Underclad Cracking In Reactor Pressure Vessel Steels
| 198 | E. Gonzalez - J. A. Pelaez | State Of Art In The Bolt'S NDT Inspection In Npps - Spanish Experience
| 28 | Sokhwan Choi and Surendra P. Shah | NDE Of Concrete Using Computer Vision
| 78 | Chudnovsky, D. Baron, Y. Shulkin, K. Sehanobish* and C. P. Bosnyak* | Lifetime, Toughness And Reliability Of Engineering Thermoplastics
| 79 | A. Chudnovsky, S. Preston*, and K. Sehanobish** | Constitutive Relationships For Material Ageing
| 136 | S. K. Salwan and R. Appavuraj | Pre-Launch Evaluation Of An Integrated Guided Flight Vehicle
| 139 | L. M. Gelman, Y. V. Burau, V. I. Krytsyn | Investigation Of Theoretical Bases Of Free Oscillation Method
| 157 | Y. V. N. Rao | Testing Of Pressure Vessels
| 258 | Han Yuli | A Nondestructive Measurement Of Elastic Strength Pressure For Autofrettaged Cylinders
| 270 | C. H. Chen | Applications Of Artificial Intelligence In Nondestructive Evaluation
| 329 | Donald Hagemaier and Nick Shah | Nondestructive Testing Of Composite Aircraft Structures
| 331 | Paulo Carlos Kaminski | Use Of Artificial Neural Networks And Natural Frequencies For Non Destructive Testing
| 333 | Ma Xuerohg | Nondestructive Testing And Part Stress Analysing To Super High Speed Wind Tunnel
| 354 | R. Murali Krishna, S. K. Gupta and J. L. Rao* | A Study Of The Alkali Effect On Cu(Ii) Ions In Cloroborophosphate Glasses By Electron Paramagnetic Resonance
| 355 | V. Fedorov, Y. Gordeev, V. Letunovsky, S. Teremov | Non-Destructive Methods Of Control As A Means For Quality Testing And Sintered Powder Composites Construction
| 377 | R. Seshadri, S. D. Bhole* | Integrity Assessment Of Thick-Walled Furnace Tubes Operating At Elevated Temperatures
| 384 | S. N. Chakravarty and A. K. Mandal | Application Of Fracture Mechanics Concept For Efficient Ultrasonic Examination Of Rails
| 406 | N. K. Tsenev, A. M. Gallyamov, B. E. Selskyi* and V. A. Baryshev | Influence Of Structural Factors On Residual Resource Of Low Carbon Steel Under Conditions Of Low Cyclic Deformation
| 441 | P. M. Ouseph, S. Gangotra, H. N. Singh and K. C. Sahoo | Diametrical Creep And Creep Sag Measurements On Irradiated Zircaloy Pressure Tubes Of Phwrs
| 477 | F. F. Gorbatsevich | Acoustopolariscopy - A New Direction In Investigation And Testing Of Anisotropic Heterogeneous Non-Homogeneous Media
| 510 | P. B. Mendhekar, A. Ramu, V. B. Rai, T. T. Emmanuel & P. M. Wagh | Power Station Surveillance Programme And Methodology
| 553 | M. Senthil Kumar and C. Sujatha | Dynamics Of Cracked Blades - A Literature Survey
| 697 | Guo Mingjun | Recent Techniques Of NDT Employing Liquid Crystals
| 707 | Hernan Vera Ruiz, Marek Dobrowolski, Jovan Thereska | Activities Of The International Atomic Energy Agency (Iaea) In The Field Of Nucleonic Control Systems, Tracers And Non-Destructive Testing
| 711 | S. Kihara, I. Nonaka and M. Nakashiro | Residual Life Estimation Of Boiler Components
| 725 | V. T. Johnson, S. Anantha Ramu and B. K. Raghuprasad | Location And Assessment Of Damage: A Genetic Algorithm Based Method
| Qualification | 746 | Hae Lee*, Chi Hyun Han** and Ik Keun Park*** | NDT Training, Certification, And Education System In Korea
| 593 | Morio Onoe | Qualification And Certification Of NDT Personnel
| 747 | L. M. Tolani | Training And Certification Of NDE Personnel In India
| 61 | D. S. Dulay, C. Galsworthy, D. J. Lovejoy | Training And Personnel Certification For NDT
| 124 | Xu Jiazhen, Liu Yueming*, Xu Shufan** | A Discussion Of Some Problems Of Magnetic Particle Detection Standard
| 125 | Liu Lianzhong, Xu Shufan*, Xu Jiazhen** | The Selecting Of Magnetization Standard In Magnetic Detection
| 200 | G. Aufricht and H. Theiretzbacher | The Vienna Agreement Is A Useful Economical Tool To Make Progress In Harmonizing International Standardisation
| 202 | U. Ewert, H. Heidt, D. Schnitger | New European Standards In Industrial Radiology
| 212 | Bart Vaessen, Peter Willems, Luc Heremans, Leo Van Bellegem | Industrial Radiography - Future Of Standards And Technology
| 288 | Levkovich V. V., Zinovjeva S. I. Engineering Centre "CERTICO" | Certification Of NDT Personnel In The Republic Of Belarus
| 289 | Orsa E. N., Nikiforova Z. S., Popoudina S. A | Standardization Of Methods In Non Destructive Testing For Dangerous Installation
| 393 | P. Vijayaraghavan, H. S. Ganesha and T. Rangachari | Calibration And Process Control Check Requirements In Non- Destructive Testing - A Review
| 395 | S. Sampath Kumar, G. S. Kandasamy* and N. S. Venkataraman** | Experimental Investigation Of Sensitivity Of Acoustic Emission Technique With Other Tool Wear When Turning Alloy Steel With Coated Tool
| 569 | V. P. Lunin and S. V. Kirsanov | Introducing Model-Based Approach For Educational Purposes In Electromagnetic Inspection Curriculum
| 616 | Tarapada Pyne | A Universal Approach To Making Of A Diagnostic Man In The Changing Maintenance Scenario: An Industry/institute Challenge
| 645 | R. Grimberg*, A. Stanciu*, D. Scripcaru* | Certification Of NDT Personnel Nd Accreditation Of NDT Laboratories In Romania
| 653 | Shuichi Fukuda | Developments Of Nondestructive Evaluation Date Bases: The Outline Of The Activities At Jsndi
| 674 | A. N. B. Ibrahim | Qualification And Certification Scheme For NDT Personnel In Malaysia
| 702 | Md. Sana Ullah | Prospects And Status Of Non-Destructive Testing And Evaluation In Bangladesh
| 291 | Nikiforova Z. S | Quality Assurance In Non Destructive Testing
| 183 | Shi Jihua | Setting Of An NDT Examination Paper (Snep)
| 309 | Decio Prado | Systematics Of Actuation Of The Qualification Center Of Brazilian System
| 316 | Yanis I. Bulbik*, Vyachaslav V. Shildin** | An Interdisciplinary Approach To Educational And Training Programmes Development In Nondestructive Evaluation Field
| 366 | Ferenc Fücsök Eur. Ing | Experiences Of The Training Of NDT Personnel
| 550 | Todd S. Fleckenstein | Personnel Qualification And Certification - A Rational And Affordable Approach
| 712 | Antonio Guilherme Mury | Introducing Leak Testing Courses In Brazil
| | ||||