NDTnetWCNDT '96 - New Delhi Table of Contents | ![]() |
NDE in Nuclear Industry| 102 | William T. Clayton | Innovative Ultrasonic Imaging Reactor Vessel Examination Technology For Section Xi, Appendix Viii
| 53 | A. Yu. Novikov, V. V. Pastushin, Yu. K. Bibilashvili, A. A. Bochvar** | Elaboration Of The Thermophysical Instruments For Non-Destructive Examination Of Tightness And Gas Parameters Inside Power Reactor Fuel Rods
| 74 | V. T. Pronyakin, N. K. Rybakov, Yu. N. Panchenko, A. A. Bochvar* | Ultrasonic Defects Measurements Of Fuel Elements Welded Joints
| 95 | Joseph SAMMAN | The Role Of NDE For The Maintenance Of The Nuclear Power Plants In France
| 100 | Chen Kaihui, Fong Songli and Chen Guoping, *Lin Junming | Eddy Current Examination Of Titanium Tube In Steam Turbine Condenser Of Unit 2 Of Guangdong Nuclear Power Station
| 104 | Phillip T Cole, Carl A Husain | On-Line Testing Of Pressure Vessels And Storage Tanks Using Acoustic Emission
| 118 | P. Pellionisz*, F. Gillemot*, G. L. Goswami**, S. K. Jha**, S. Pirfo*** | Investigation Of Nuclear Reactor Steel By Magneto-Acoustic Emission Method
| 235 | A. Rajendran, C. Asokane, G. Elumalai and K. Swaminathan | Development Of An Ultrasonic Under-Sodium Scanner For The Fast Breeder Test Reactor
| 246 | Hou Ben. Ding, Hong. Li, et al | A Portable High Resolution Compton Backscatter Scanning Instrument
| 352 | J. P. Panakkal, K. V. Vrinda Devi, D. Mukherjee, R. S. Wadhwani and H. S. Kamath | Passive Gamma Scanning (Pgs) And Gamma Autoradiography (Gar) Of Mox Fuel Pins For Boiling Water Reactors: A Comparative Study
| 375 | V. Balasubramaniyan, S. C. Chetal, A. Selvaraj and P. V. Kumar | In-Service Inspection And Monitoring Of Prototype Fast Breeder Reactor Components
| 439 | P. M. Ouseph, S. Gangotra, H. N. Singh and K. C. Sahoo | Gamma Scanning And Gamma Spectrometry Measurements On Irradiated Pressure Tubes Of Phwrs
| 443 | J. L. singh, Arun Kumar*, V. R. Nair, E. Ramadasan, S. Majumdar and K. C. Sahoo | Quality Evaluation Of Phwr Fuel Element End Cap Weld Joints By Ultrasonic Testing Technique
| 444 | J. L. Singh, Sunil Kumar, R. Keswani, S. Muralidhar, A. K. Sengupta, H. N. Singh and K. C. Sahoo | Detection Of Blister Formation And Evaluation Of Pressure Tube/calandria Tube Contact Location By Ultrasonic Velocity Ratio Measurement Technique
| 464 | R. Taneja, S. K. Parulkar, Manjit Singh and G. Govindarajan | Eddy Current Measurement Of Annular Gap Between Pressure Tube And Calandria Tube In Indian Pressurised Heavy Water Reactors (Phwrs)
| 465 | R. K. Puri, Manjit Singh and G. Govindarajan | Techniques To Measure Deflection Of Pressure Tubes In Indian Pressurised Heavy Water Reactors (Phwrs)
| 467 | P. A. Venkatachalam, J. Selva Solomon*, Agnelo Mascarenhas*, L. Pathak* and P. C. Koteswara Rao | Ultrasonic Through Transmission Technique For Evaluation Of Structural Integrity Of Concrete In Nuclear Facilities
| 478 | K. Siddappa, Ganesh and K. M. Balakrishna | Neutron And Gamma Activation Analyses Using Microtron Facility
| 488 | I. Jayakumar, M. Manimohan, G. V. Chandrasekaran, S. Abdul Majeeth and P. S. Subramanyam | Assuring Reliability Of Unconventional Weld Joint Configurations In Austenitic Stainless Steel Nuclear Vessels Through Non- Destructive Examination
| 509 | P. K. John, Y. Anto, C. P. Mungikar, P. M. Wagh and B. K. Bhasin | Development Of A Mock-Up For NDE Of Bwr Reactor Core Shroud Welds
| 511 | R. Subbaratnam, A. Baskaran and M. Palaniappan | Evaluation Of Overlay On Stainless Steel By NDE Methods
| 535 | S. Rajendran & M. S. Ramakumar | In-Situ Inspection Of Grooves In Reactor Tube Sheet Using A Remotely Operated Cast Impression Taking Device
| 536 | P. V. Thomas, M. Palaniappan and R. Chandramohan | Helium Leak Testing Of Reactor Components - Our Experience
| 538 | S. Muralidhar, S. D. Raut, R. S. Prasad, K. N. Mahule, J. K. Ghosh, V. H. Patankar*, S. R. More*, V. M. Joshi* and K. Gopalakrishnan* | Development Of A C-Scan Imaging System For Detection Of Non-Bonds In Plate Type Fuel Elements
| 539 | K. N. Chandrasekharan, B. P. Patil and J. K. Ghosh | Use Of Colour Radiography For The Homogeneity Evaluation Of Al-U Alloy Nuclear Fuel Plates
| 544 | T. R. G. Kutty**, C. Ganguly**, A. K. Bhandyopadhyay* M. D. Mangsulikar* and D. H Sastry*** | Evaluation Of Elastic Constants Of Al-U And Al-U-Zr Alloys By Ultrasonic Technique
| 670 | R. K. Mistry, B. Laxminarayana, R. K. Srivastava, J. Shankar Kumar, M. Surya Prakash, N. Saratchandran, V. A. Chandramouli, Dr. T. S. Krishnan, and K. Balaramamoorthy | 25 Years Of NDE In The Fabrication Of Zircaloy Mill-Products And Nuclear Fuel
| 671 | M. S. Prakash, K. Vasudev, K. S. Lakshmi and B. Laxminarayana | Monitoring Of Phwr End Cap Weld Quality By Ultrasonic Testing
| 673 | H. R. Ravindra, G. Radhakrishna, B. Gopalan and S. Syamsundar | A Non-Destructive Testing Technique Involving Fluorescent X-Ray Absorption Spectrometry For Measuring Chromium Plating Thickness On Ss-316 Sub-Assemblies Of Indian Fast Breeder Test Reactor
| 56 | V. K. Ravindran*, E. Narayanan**, P. Revindran*, M. P. R. Panicker*, B. C. Bhaumik* | Development Of A Liquid Couplant Free Contract Ultrasonic Test System For Bond Evaluation Of Solid Propellant Grain Of Rocket Motor Igniter
| 57 | P. Revindran, M. P. R. Panicker, V. K. Ravindran, B. C. Bhaumik | Ultrasonic Evaluation Of Maraging Steel Subscale Rocket Motor Chamber - An Analysis Of Associated Problem
| 82 | S. V. Rajagopal, V. P. Unnikrishnan, G. Sunilkumar, R. M. Divakaran, A. K. Rath | Non-Destructive Testing Of Metallic Honeycomb Sandwich Structures For Launch Vehicle Applications
| 122 | Philippe Rizo, Michel Antonakios, Patrick Lamarque* | Solid Rocket Motor Nondestructive Examination Using Tomosynthesis Methods
| 158 | P. K. Chaturvedi, S. K. Athithan, R. N. Bhattacharya, M. C. Uttam | Microwave Technique For Non-Destructive Testing Of Solid Propellant And Composite Materials
| 184 | Shi Zhenduo | A Study On Rating Of Hair Line Seams Indications In Aeronautical Steel Materials
| 208 | R. Samuel, M. V. Rao, T. S. Sriranga, P. S. Nair and A. V. Patki | Automated NDE Systems For Spacecraft Structural Components
| 220 | Prasanna Karpur, Theodore E. Matikas, Robert L. Crane | Advances In Ultrasonic Methods For Materials Research Of Aerospace Materials
| 687 | Deepak Bansal and C. R. L. Murthy | NDE Of Helicopter Composite Rotor Blades Using Acoustic Impact Technique
| 356 | A. Jayachandran, K. G. Appaiah, Keshavamurthy, C. N. Raghavan, A. S. Salehittal | NDT Applications In Aerospace Industries-Specific To Aeroengines
| 392 | S. R. Ravishankar and C. R. L. Murthy* | Modelling Drill Induced Delaminations In Composite Laminates
| 455 | V. N. Misale, S. Ravishankar and S. Mohan | Non-Destructive Testing Of Spacecraft Propulsion System Tankages
| 493 | K. Venkata Rao, P. V. Sai Suryanarayana, R. Viswanathan, K. Viswanathan and S. K. Athithan | Application Of High Energy Radiography For Qualification Of Large Solid Rocket Motors In Indian Space Programme
| 495 | P. V. Sai Suryanarayana, C. Subbiah, K. Venkata Rao, K. Viswanathan and M. C. Uttam | Quantitative Assessment Of Defects In M250 Maraging Steel Using Ultrasonic Testing
| 496 | B. Munirathinam, P. V. S. Kurmanath, K. Venkata Rao, K. Viswanathan and M. C. Uttam | Performance Of Radiation Sources Of Different Energies In The Qualification Of Solid Propellant Rocket Components
| 503 | Hsi-Ying Chow, Yung-Chuan Pan, Chi-Min Chang, Hong-Yie Chen and Chih-Han Wang | Applications Of NDT To Failure Analysis And Quality Improvement For Some Typical Missile Components
| 529 | C. Muralidhar, D. L. Siddalingaiah and K. Sreenivasa Reddy | Non-Destructive Evaluation Of Defects In Different Fibre Reinforced Composites Using Ultrasonic And X-Ray Radiography
| 648 | Anuradha Dwarakanath*, C. R. L. Murthy*, S. Viswanath**, K. Dwarakanath**, R. M. V. G. K. Rao *** | Evaluation Of Damage In Foam Sandwich Components For Aircrafts
| 696 | A. Haque, U. K. Vaidya, H. Mahfuz and S. Jeelani | Nondestructive Evaluation (NDE) Of Thick Section Composites Under Static Compression And Compression-Compression Cyclic Loading
| 703 | Jafar Sadique and Md. Jahidul Kabir | Under Skin Crack Detection Of Aircraft Using Eddy Current
| 170 | Ryuichi Okuno, Yukinori Iizuka, Akio Nagamune and Katsuyuki Nishifuji | New On-Line Ultrasonic Testing System Using Chirp Pulse Compression Processing
| 251 | Gautam Pasupuleti, Derrick D. Hongerholt, Joseph L. Rose and Randall M. German* | Ultrasonic Sensors And Process Control In Powder Injection Molding
| 253 | Karthik Narayan, Derrick D. Hongerholt and Joseph L. Rose | Ultrasonic NDE Of Pressed Metal Parts
| 383 | S. N. Chakravarty and A. K. Mandal | Ultrasonic Examination Of Rolling Stock Axles - Indian Railways Experience
| 454 | S. Venkadesan, P. Palanichamy, M. Vasudevan and Baldev Raj | Ultrasonic Velocity Measurements - A Potential Sensor For Intelligent Processing Of Austenitic Stainless Steels
| 547 | Waschkies E. and Kröning M | Tool Monitoring - An Example For Process Integrated Nondestructive Testing (Pint)
| 560 | B. W. O. Shepherd, W. Nuding+, S. Lawson*, H. Godinot**, D. Flotte*** and J. M. Farley | NDT Methods For Flaw Detection During Welding
| 564 | Klaus Berner, Holger Stilke, Gerda Bach* and Horst Ballmann* | Fully Automatic Ultrasonic Testing Plant For Online Inspection Of Heavy Plate With Plate Thicknesses Upto 150 Mm Including Inspection For Surface Defects In Plate Head And Tail Regions
| 594 | H. Wolf, B. Bucher*, R. Meyer*, R. Kern+, M. Kroning** and W. A. Theiner** | Process Integrated Nondestructive Testing Of Hardness
| 605 | M. Kroning*, H. J. Salzburger*, Y. Smorodinski**, V. I. Mironenko*** | Measurement Of Wall-Thickness At Extreme Temperatures Using Emats
| 606 | Surendra Singh | Emerging Ultrasonic Techniques For Process Sensing And Control In Manufacturing
| 650 | Krishnan Balasubramaniam | Ultrasonic Monitoring Of The Pultrusion Manufacturing Process
| 34 | Ainul Akhtar and David Kung | Nondestructive Evaluation Of Cylinders For The Storage Of Natural Gas And Hydrogen Fuels On Automobiles
| 427 | K. Narasimha Rao, S. K. Kundu*, B. G. Patil** and Ram Avtar | Non-Destructive Testing Of Spiral Weld Steel Pipes
| 438 | R. Murali, U. Ramamurthy and B. K. Bhasin | Testing And Analysis Of Mov'S
| 517 | Rajeev Kumar and Dr. A. K. Dhawan | Geophysical Investigation Of Assam Gas Based Power Project (Assam)
| 537 | J. K. Ghosh, S. Muralidhar, S. D. Raut, S. Rajendran*, G. Singh*, D. Venkatesh*, P. K. Bhaumik* and M. S. Ramakumar | Development Of An Ultrasonic Inspection Gig For Monitoring A Buried Pipeline
| 546 | K. K. Tandon | Condition Monitoring Of Cross-Country Pipelines Through Intelligent Pigging
| 628 | M. Thavasimuthu, A. Joseph, A. S. Ramesh, C. V. Subramanian, T. Jayakumar and P. Kalyanasundarm | Assessment Of In Service Degradation Of Conical Inlet Of A Waste Boiler In A Chemical Plant By NDT Methods
| NDE of Tubes and Bars | 15 | D. Dutta | Development Of Rotary Probe Ultrasonic Testing System Of Large Diameter Seamless Pipes For Oil And Gas Industries In India
| 19 | Zheng Kaisheng and Chen Yucheng, Baoji Non-ferrous Metals Works | A New Ultrasonic Testing Technique For Titanium Bars With Small Diameter
| 88 | Paul Schneider and Dr. Albrecht Maurer | Special Features And Differences In Non-Destructive Testing Of Precision Tubes And Api-Tubes
| 129 | G. Raghava, P. Gandhi and D. S. Ramachandra Murthy | Measurement Of Surface Cracks In Large Size Steel Tubular Joints Of Offshore Jacket Structures
| 135 | Yudhisther Kumar, Ashok Kumar and Basant Kumar | Non-Destructive Evaluation Of Rods By Ultrasonic C-Scan System
| 240 | Hartmut Kummel | Advanced Techniques In Non-Destructive Tube Testing
| 334 | Ma Xuerohg | Comprehensive Utilization Of NDT On Distinguishing Defect'S Character Of Repair Welding Welded Seam
| 634 | K. A. Gopal, N. Raghu, N. G. Muralidharan, P. V. Kumar and K. V. Kasiviswanathan | Development Of Calibration Standard For Non-Destructive Testing Of Small Diameter Tubes
| 660 | Peng Yingqiu, Zhu Jianguo, Li Jien | A New Ultrasonic Testing Technique No Dead Zone For Small Bars With Coarse Gain Structure Development On Line Focussed Creep Wave Probe
| 672 | G. S. S. Sastry N. R. Rao J. Shankar Kumar | Evaluation Of Circular Bar For Critical Applications Using NDT Techniques
| NDE of Composites | 31 | Junji Takatsubo, Shigeyuki Yamamoto, Akira Watanabe* and Kazuhiro Kametani* | Ultrasonic Technique For Quantitative Evaluation Of Dispersed Particles In Metal Matrix Composite
| 32 | J. Prasad | NDE For Carbon-Fibre-Composites Through Ultrasonics: Indian Experience
| 35 | Shao Zebo, Wang Xiaoling and Song Shubo | Ultrasonic Inspection Of The Impact Damage To Cerp Laminated Plate
| 81 | Hyunjo Jeong*, David K. Hsu** and Peter K. Liaw*** | Determining The Constituent Volume Fractions Of Metal Matrix Composites By A Multiple NDT Technique
| 117 | Hans Erik Gundtoft and Kaj Kvisgaard Borum | Evaluation Of Advanced Fibre Composite And Sandwich Structures By Ultrasonic Examination
| 233 | Pravesh Kumar and Ravi Prakash Mechanical Engineering Group | Quality Assessment Of Glass Fibre Composites By Acousto Ultrasonic Technique
| 298 | Kiyoshi Ishihara*, Osami Kobori**, Isamu Sakamoto**, Masayuki Sato***, and Masaru Omura**** | Ultrasonic Measurement Of Development Of Elastic Anisotropy Due To The Applied Strain In Fiber Reinforced Plastics
| 387 | H. N. Sudheendra, M. R. Madhava, M. Subba Rao and B. R. Somashekar | Ultrasonic Through Transmission Inspection Of Co-Cured Cfrp Aircraft Components
| 391 | M. V. Hosur and C. R. L. Murthy | Ultrasonic Evaluation Of Delamination In Quasi-Isotropic Cfrp Laminates Subjected To Low-Velocity Impact
| 418 | Basant K. Parida and D. R. Sankhala* | Structural Damage Assessment Of Cfc-Components Through Ultrasonic NDE Method
| 595 | Raj N. Singh and James E. Webb | Characterization Of Thermal Shock Damage In 2-D Woven Fiber- Reinforced Ceramic Composites
| 626 | D. Ponraju*, Letha Sebestian*, S. Viswanathan*, A. Natarajan*, P Palanichamy**, T Jayakumar** and Baldev Raj** | On-Line Measurement Of Residual Monomer During Polymerization Of Acrylamide Using Ultrasonics
| 649 | Krishnan Balasubramaniam, Nain S. Rao and Yuyin Ji | Characterization Of Material Properties Of Multi-Layered Fiber Reinforced Composite Structures Using Inverse Ultrasonic Methods
| 10 | V. K. Srivastava and Pravesh Kumar* | Behaviour Of Modified Acousto-Ultrasonic In Gfrp Composites
| 16 | Adal Arasu*, K. G. Satyanarayana**, B. C. Pai**, R. M. Pillai** and S. Madavan* | Quality Evaluation Of Cast Al-Sicp Composites
| 33 | Gouri S. Bhuyan | NDE Based Grading And Quality Assurance Of New And Old Utility Wood Poles
| 169 | Aamir Khalid, Victor Kearley** | The Development Of Ultrasonic Non-Destructive Evaluation Techniques For The In-Situ Inspection Of Wooden Transmission Poles
| 194 | T. L. Shaji, S. Somayaji* and M. S. Mathews** | Evaluation Of Structural Timber In Historic Buildings Using NDT Techniques
| 238 | K. Shyamasundar, B. S. Aswathanarayana and M. Venugopal Naidu | Grading Of Swan Timber - Elasto Sonic Way
| 301 | Vasundhara | Non-Destructive Field Testing Of The Behaviour Of Yielding Cable Bolts With Mini Cages
| 318 | Raja Ram Yadav | Nondestructive Characterization Of Vitreous Silica
| 408 | Narayan R. Joshi | Ultrasonic Interference Spectroscopy For Plastic Ic Packages
| 416 | K. S. Tan, P. Hing**, B. S. Wong* and S. C. Ong* | Ultrasonic C-Scan Of Embedded Foreign Inclusions In Sintered Ceramics
| 422 | M. V. M. S. Rao, D. S. N. Murthy, G. M. Nagaraja Rao*, K. Shivakumar* and S. Udayakumar* | Estimation Of Crack Density Of Heat-Soaked Granite Using Ultrasonics
| 485 | G. M. Nagaraja Rao, C. R. L. Murthy* and N. M. Raju | Study Of Effect Of Strain Rate On Critical Damage In Granite By Ultrasonic Imaging
| 490 | Manish Gupta, Hasan Abdullah and A. K. Dhawan | Application Of Laboratory Non-Destructive Techniques For Rocks
| 526 | S. Kamle, S. Upreti*, N. G. R. Iyengar and A. Kumar* | NDT Of Adhesive Joints Using Transverse Waves
| 534 | A. K. Mukhopadhyay, D. Basu, S. Mukherjee and K. K. Phani | Ultrasonic Velocity Measurement For Characterisation Of Porosity In Sintered Ceramics And Metals
| 566 | N. Gopalasami, S. Bakhtiari and A. C. Raptis | Near-Field Millimeter-Wave Imaging Of Nonmetallic Materials
| 582 | B. S. Acharya and Rajeev | A Journey Towards Characterisation Of Processed Indian Minerals - Xrd And Xrf Approach
| 676 | V. Rajendran*, H. A. El. Batal** and F. A. Khalifa** | Compositional Dependence Of Acoustic Properties And Structural Role Of Lead In Lead Silicate Glasses
| NDE of Concrete | 224 | T. T. Wu and J. S. Fang | Application Of Transient Elastic Waves To The Nondestructive Evaluation Of Concrete
| 225 | Chung-Yue Wang* and Y. F. Chang** | Evaluation Of The Bonding Condition Between Steel Plate Patch &Amp; Strengthened Concrete Structure
| 226 | Yiching Lin | Recent Developments In The Impact-Echo Technique For Nondestructive Evaluatoin Of Concrete Structures
| 228 | Young H. Kim | Development Of Impact Resonance Tester For Concrete Structures
| 241 | Lin Weizheng Yuan Yiyong | Ultrasonic Detection Of Cement Concrete Pavement Thickness
| 281 | Alan Sibbald, Charles Fairfield, & Abdelmadjid Bensalem | Flaw Detection And Sizing In Masonry Arch Bridges
| 335 | He Xiutang Liu Yifei Lin Zhenwang* | New Non-Destructive Testing Technique Using Example On The Concrete Quality Inspect
| 489 | Chih-Hung Chiang and Cho-Liang Tsai | The Nondestructive Evaluation Of Coated Steel Bar In Reinforced Concrete Structure
| 571 | Mohamad Pauzi Ismail, Kamarudin Mohd. Yusof* and Abdul Nassir Ibrahim | Ultrasonic Relative Amplitude Method For Predicting The Strength Of Concrete
| NDE of Stress | 11 | Shao Zebo, Song Shubo and Gao Xiaoli | Research On The Measurement Of Edge Stress In Pressure Vessel
| 50 | F. M. Furgiuele, L. Pagnotta and A. Poggialini | Measurement Of Non-Uniform Residual-Stresses By Full-Depth Hole- Drilling Technique
| 173 | Nobuo OGAWA*, Tomohiro HIRANO*, Kimiharu OHTA*, Kosuke HOSINO** and Koji ARAI** | Quantification Of Shotpeening
| 308 | Hirotsugu Ogi, Masahiko Hirao, and Hidekazu Fukuoka | Ultrasonic Measurement Of Bending Stresses In Electric - Resistance-Welded Pipe By Electromagnetic Acoustic Resonance
| 379 | A. Mitra, B. Ravi Kumar, N. K. Mukhopadhyay, G. V. S. Murthy and D. K. Bhattacharya | Residual Stress Evaluation In Service Exposed Shot Peened Spring By Micromagnetic And X-Ray Diffraction Techniques
| 407 | S. S. Ghanpathi, V. V. Pandit and N. L. Chandrachud | Application Of Barkhausen Noise-Residual Stress Measurement Technique To Solve Cracking Problem In Diesel Engine Cylinder Heads
| 498 | Shigeru Kurosaki and Shuichi Fukuda* | Strain Gage Method For Stress Intensity Factor Analysis Of The Shear Mode
| 525 | B. S. Acharya and B. B. Nayak | X-Ray Diffraction As A Non-Destructive Tool For Characterisation Of Thin Films, Nanocrystalline And Refractory Materials
| 555 | V. Vengrinovich, A. Vyshnevsky, V. Tsukerman and V. Busco | On The Selective Evaluation Of Stresses, Residual Plastic Deformation And Metal Degradation By Magnetic Noise Technique
| 618 | Parag R. Abhyankar | Non-Destructive Xrd Residual Stress Analysis Of Aged 2014 Aluminum Alloy
| 663 | Sanjay Rai, S. Sujith and T. Jayakumar | X-Ray Diffraction Based Residual Stress Analysis Of Repair Welds Of Cr-Mo Steels
| NDE of Defects | 18 | Shizong Chen | One Fatigue Crack Source And Its Nondestructive Testing
| 23 | Ward D. Rummel | Overview Of Nondestructive Evaluation (NDE) - Capabilities Assessments And Probability Of Detection (Pod) Concepts
| 48 | Pi-Kurn Chen | Application Of NDT In The Steel Making Plant
| 55 | P. Revindran, M. P. R. Panickar, V. K. Ravindran, B. C. Bhaumik | An Assessment Of Minimum Gap Required Between The Faces Of Tight Cracks For Reliable Detection By Ultrasonic Shear Waves - A Fracture Mechanics Approach
| 86 | Yu. V. Lange, S. I. Voropaev, Moujitski, S. Hubbard* | New Means For Nondestructive Testing Of Multi Layer Structures Of Composites
| 96 | K. K. Jha & T. K. Agrawal & Mr. B. R. Malhotra | Quality Problems In Heavy Steel Forgings And Role Of NDE
| 110 | George Teodoru, VDI-Expert | Engineering Society Cologne Presents Itself (NDT-Methods)
| 261 | A K Nandi | Time Delay Estimator For Surface Profiling
| 303 | P. P. van`t Veen | Inspection Of Adhesive Joints In Grp Pipelines
| 327 | B. Nouailhas, P. Wagner, I. Molinero**, J. L. Lesne*, V. Durbec* | A Study Of The Probability Of Detection By A Statistical Approach
| 337 | Yan-Rongming, Deng-Jianping* | The Smallest Defect That Can Be Detected Using Ultrasonic Testing
| 349 | S. P. Srivastava, A. Manjunatha, M. Jayandranath | Quality Of Seal Discs-Through NDT
| 399 | Ashok J. Trivedi and Rajul R. Parikh | Ultrasonic Inspection Of Shell Body Using Multi Channel Ultrasonic Immersion Testing System
| 460 | J. Verkooijen and N. Trimborn | Practical Experiences In The Application Of Advanced Ultrasonic Equipment To Decrease Downtime Through Non Intrusive, True Condition Assessment
| 476 | R. Prasad and S. Kumar* | Study Of Correlation Between Ultrasonic Flaw Indications And Types Of Defects
| 561 | R. Ambardar, T. Jayakumar*, S. K. Pathak and O. Prabhakar | Effect Of Surface Roughness On Ultrasonic Echo Amplitude In Aluminium-Copper Alloy Castings
| 579 | C. V. Subramanian, A. Joseph, A. S. Ramesh, T. Jayakumar, P. Kalyanasundaram and Baldev Raj | Wall Thickness Measurements Of Tubes By Internal Rotary Inspection System (Iris) - A Comparative Study With Metallography
| 597 | M. Clerico, D. Cuppini*, G. Cataldo* and L. Giroletti** | NDT Observation And Analysis Of Crater-Shaped Damage
| 602 | V. K. Sinha | Manufacturing Defects And Their Effect On Type Of Failure In Castings And Forgings - Some Case Studies
| 607 | Dong-Man Suh and Whan W. Kim* | A New Ultrasonic Technique For The Detection And Sizing Of Small Cracks In Stud Bolt Threads
| 662 | *T. M. Gurieva, **V. T. Pronyakin, **N. K. Rybakov | Nondestructive Testing Of Materials And Welded Joints In Iter Applications
| 667 | V. I. Pokhmurskiy, R. K. Melekhov | Initiation Of Stress Corrosion Cracks In The Stainless Steels In Chloride, Caustic Solutions And Weather
| 683 | Jelena vojvodi Gvardjancic *, Joze Zorko** | Size Estimation Of Reflector By Ultrasonic Inspection
| Condition Monitoring | 40 | L. B. Zuev, V. I. Danilov, V. V. Gorbatenko and S. N. Polyakov | Structural Integrity Monitoring By Deformation
| 114 | S. Kasinathan, P. Annamalaisamy, P. Sundaramoorthy and V. Thyagarajan | On The Application Of In-Situ Metallography And NDT In The Detection Of Micro Fissures In Stainless Steel Welds
| 166 | Shuwo Chen, Tariq Sattar, Aamir Khalid and Bryan Bridge | Design, Development And Performance Evaluation Of A New Pneumatically Powered Versatile Wall-Climbing Robotic NDT System Suitable For Hazardous Environments
| 167 | Shuwo Chen, Tariq Sattar, Aamir Khalid and Bryan Bridge | Effects Of Changes Of The Centre Of Gravity Of A Scanning Arm On The Dynamic And Static Performance Of A Versatile Wall-Climbing Robotic NDT System
| 168 | Aamir Khalid, Schuwo Chen, Tariq Attar, and Bryan Bridge | Design And Performance Evaluation Of A Miniature Magnetic Climbing NDT System For The Inspection Of Ferritic Structures
| 186 | D K Deka | Non Destructive Testing Of Coke Chambers Of Dubbs Coking Unit At Digboi Refinery
| 187 | S. K. Das | Coating Health Assessment
| 188 | R. N. Sharma and S. Singh | Cracking Of Weld In Reactor R - 1 Of Coker - A
| 315 | Sreenivas Alampalli | Modal Analysis For Damage Detection Of Large Structures
| 323 | Sara Keller and Dave Medina, Carlos Pairazaman* | Requirements Vs Real Life Implementation Of Quantified Eddy Current Inspection Of Gas Turbine Engine Components
| 347 | Udaya B. Halabe | Rapid Evaluation Of Bridge Decks And Pavements Using Ground Penetrating Radar
| 371 | Delawar Bakht | Complexity Evaluation In NDT Application For Inservice Inspection And Energy System Maintenance In Bangladesh
| 386 | A. K. Chatterjee, Yatindranath, B. N. Panda and C. Mishra | Condition Monitoring Of Oxygen Steel Making Vessel By Laser Technique
| 388 | J. Runkel, U. Südmersen, A. Vortriede, W. Reimche and D. Stegemann | Condition Monitoring Of Industrial Machines
| 405 | Fahmy M. Haggag and K. Linga Murty* | Nondestructive Measurement Of Key Mechanical Properties In Welded Components Using A Novel Stress-Strain Microprobe System
| 409 | C. Mishra and S. Muncherji | Expert System For Wear Debris Analysis - A Powerful Tool For Condition Monitoring
| 461 | V. N. Bindal | Evaluation Of The Aging And Conservation Of The Ancient Temple Of Lord Jagannath Using NDT Techniques
| 518 | Rajeev Kumar and A. K. Dhawan | Sub-Surface Investigation In Parliament House Complex
| 587 | C. Kannan, S. N. Pandey and A. K. Mehta* | Damage Assessment And Retrieval Of A Crank Shaft Of Seized Heavy Duty Engine Through In-Situ Metallography
| 589 | Q. M. Amir, S. B. Mohapatra and S. N. Pandey* | Condition Monitoring Of Fluidised Catalytic Cracking Unit In A Petroleium Refinery
| 669 | Ashok Tiwari and C. B. Shah | Evaluation Of Distressed Structures Using NDT Techniques- A Few Case Studies In Gujarat
| 708 | V. K. Rajan | Condition Monitoring And Life Assessment Of Diesel Engine Through Non-Destructive Testing
| 709 | Sanjay Bose, and V. K. Rajan | Condition Monitoring And Life Assessment Of High Voltage Machines Through Non-Destructive Testing
| 717 | V. Jeyaraj | Non-Destructive Testing Of Antiquities In Government Museum, Madras
| Vibration Monitoring | 8 | Valery A. Rudnitsky, Alexander V. Rabtchevich | Dynamic Indentation Method For The Estimation Of Mechanical Properties Of Materials
| 47 | N. A. Orlov, V. N. Kovalsky, A. N. Kovalenko, U. V. Bogatenkov** | Computer Vibrodiagnostic Application: Oil Pumping Station Equipment
| 97 | T. K. Mitra | Instrtumentation System For Railway Track Vibration Detection By Piezoelectric Crystals
| 112 | C. Sujatha* and S. Thanooja** | The Use Of Modal Parameters In Non-Destructive Evaluation Of Damage In Composite Structures
| 223 | Chien-Ching Ma and Kuo-Cheng Huang | Transient Analysis Of An Interface Crack Subjected To Dynamic Body Force In Dissimilar Isotropic Materials
| 420 | P. K. Ramakrishna Rao, P. Prasad, M. Vasanth Kumar and V. Shantha | On-Line Wear Monitoring Of Single Point Cutting Tool Using Vibration Techniques
| 580 | Saju Skaria and C. R. L. Murphy | Non-Destructive Evaluation Of Advanced Composite Honeycomb Structure - Some Studies
| 684 | Klara Shiloh* and W. A. Ellingson** | Non Destructive Evaluation Of Nickalon/sic Composites By Vibration Analysis
| Life Prediction | 127 | Rob G. Alferink, Wim T. Jansen | Residual Life Time Estimation Of A Heat Exchanger
| 369 | R. J. Pardikar, N. Ayodhi and P. S. Subrahmanyam | Regaining Lost Capacity Of Aging Boiler Components By Performance Evaluation And Residual Life Assessment: An Exciting Challenge For NDE
| 417 | F. F. Giginyak and A. A. Lebedev | The Advancement Of Methods For Assessing Structural Materials Life Under Cyclic Loading At A Complex Stress State
| 437 | S. K. Agrawal | In-Situ Metallography - Feedback From Personal Experience
| 540 | B. B. Rupani and R. K. Sinha | Sliver Sample Scraping Technique For Application In Determination Of Residual Service Life Of Tubular Components
| 588 | Dr. Sova Bhattacharya, S. B. Mohapatra and S. N. Pandey* | Fitness For Service Evaluation Of Fire Damaged Refinery Equipment
| 596 | M. Clerico, L. Giroletti* and C. Marelli* | NDT Techniques For Diagnosis And Life Extension Of Industrial Plants
| 625 | N. Raghu, N. G. Muralidharan, T. Jayakumar and K. V. Kasiviswanathan | In-Situ Metallography For Damage Assessment And Life Extension In Power Plant - A Few Case Studies
| 630 | C. V. Subramanian, M. Thavasimuthu, A. S. Ramesh, T. Jayakumar and P. Kalyanasundaram | Fatigue Crack Growth Studies On A "Tee Junction" Using Ultrasonic Non-Destructive Methods
| NDE for Medical Applications | 243 | E. Cendre, G. Peix, V. Kaftandjian, D. Babot | High Resolution X-Ray Computed Technology Applied To Bone Structure Characterization
| 598 | Dr. (Ms.) Bunty M. Java | Advances In Medical Imaging
| 610 | K. M. M. Rao | Image Processing For Medical Applications
| 642 | V. R. Singh | Diagnosis Of Bone Fractures By Using An Acoustic Technique
| LPT, MPT and Leak Testing | 2 | P. P. Prokhorenko, A. R. Baev | Physical Principles Of Magnetic Fluid Dimension Testing
| 3 | Petr P. Prokhorenko, Nikolai P. Migoun | Hydrodynamic Principles And Physical Aspects Of Liquid Penetrant Testing
| 4 | P. Prokhorenko, N. Gil, G. Konovalov and A. Mayorov | The Testing Of The Perpendicular To The Free Surface Adhesion Boundary
| 64 | D. J. Lovejoy | A Quantitative Study Of The Effect Of Etching Components With Acid Iron Iii Chloride Solution On Subsequent Fluorescent Penetrant Inspection
| 99 | Zhen Shizong, Fang Hai, Wang Jianxi | Research Of Water Electro-Osmose Penetrant Liquid
| 108 | P. P. Subramanian | NDT Methods Adopted For Locating Liner Leak In Urea Reactor
| 239 | Lin Zhenwang*, Gong Decheng *, Chen Zhenlu1, He Xiutang** | Penetrant Test Development Mechanism And Developer Molecular Structure
| 435 | T. Gurunathan, R. Thiyagarajan and A. R. Subramanian | Quantitative Evaluation Of Leak Rates In Pressure Type Helium Leak Tests - A New Methodology For System Calibration
| 436 | T. Gurunathan, R. Thiyagarajan and A. R. Subramanian | Continuous Improvements In The Field Of Helium Leak Testing - A Reality At Bhel
| 472 | N. G. Dutta, Anis Ahmad, P. G. Kulkarni and D. S. C. Purushotham | Development Of Test Procedures And Results Of Helium Leak Testing Of Nb-Ti Superconductor Billets
| 574 | B. S. C. Rao, M. Gopalakirshna, A. Bhaskaran, R. Subbaratnam and M. Palaniappan | Innovative Techniques In Locating Eluding Micro Leaks Case Studies
| 622 | P. M. Shah | Approval Of Penetrant Material And Case Study On The Effect Of Surface Tension Of Penetrant Material On Test Results
| | ||||||||||||||||||||||||||||||||||||||||||||