 NDTnetWCNDT '96 - New Delhi Table of Contents |  |
X-Ray and Gamma Ray Techniques
| 25 | T. K. Jayakumar and A. D. Naik | Com-Scan Techniques For Material Evaluation
| 38 | Guo Mingjun | Measuring The Fine-Structure Of Energy Level With Transmission Method
| 67 | J. D. Comins, A. G. Every, W. Pang and P. R. Stoddart | Surface Brillouin Scattering As A Tool For NDT &Amp; E
| 91 | Joseph M. Kosanetzky*, Geoffrey Harding** | Fluorex - A Near Mono-Energetic X-Ray Source For Quantitative Measurements
| 93 | Christian Thiery, Christian Gondard, Eric Helies and Luc Paradis | Analysis Of Radiographic Films Through Modelisation Of The Data Acquisition Line And A "Simulated Annealing" Algorithm
| 120 | Health and Safety Division | Twenty Years Of Experience In Applying Gamma Spectrometry For NDT V. Meenakshisundaram And V. M. Raghunath
| 159 | P. K. Chaturvedi, K. M. Reddy, V. N. Rao, C. Subbaiah, R. N. Battacharya, K. Viswanathan and S. K. Athithan | Development Of Composite Fluorescent Screens For High Energy X- Ray Imaging Applications
| 164 | Kazuo Hirayama, Sigeaki Yokota, Kenji Hashimoto, Masahiro Nakamura, Kazuo Nakamura* , Takuichi Imanaka* and Mitsuaki Katoh** | Measurement Of A Flaw Height By Radiographic Testing
| 181 | B. Patra | Analysis Of Bauxite Samples By X-Ray Fluorescence Spectroscopy Using Powder Pelletized Method
| 193 | Heiner Putzbach, Joseph M. Kosanetzky, Werner Roye | Modern X-Ray Inspection In The Automotive Industry
| 213 | Luc Heremans | Enhanced Film-System Technology For Industrial Radiography
| 244 | P. Duvauchelle, D. Babot, G. Peix, P. Zhu | X-Ray Scattered Evaluation Techniques
| 245 | Valerie Kaftandjian*, Yue Min Zhu**, Gilles Peix *, Daniel Babot* | Automatic Inspection Of Aluminium Ingots By Digital Radioscopy
| 247 | Myoung-Seon Choi and Young-Sang Joo | Resonance Scattering Of Acoustic Waves From A Nuclear Fuel Rod In Water
| 248 | Jens Ulrik Madsen | Design Characteristics And Focal Spot Measurement Of A 320 Kv Microfocus X-Ray Set
| 269 | U. Ewert, J. Stade, U. Zscherpel, K. Kaling* | Luminescence Imaging Plates In Industrial Radiography - First Experience And Comparison To The Film
| 296 | Mike Knell | Improving Actual Film Quality Using Image Quality Parameters From New National And International Standards
| 300 | Feng Changchun, Wu Chunlong, Zhou Wei* | Relationship Between X-Ray Attenuation Coefficient And X-Ray Tube Voltage
| 320 | Alf Daaland | Real Time Radiography For Inservice Inspection Of Flexible Pipeline System
| 365 | Thomas C. Koshy, N. Narayanankutty and S. Krishnamoorthy | Radiographic Image Enhancement Using Opaque Fillers In Adhesive Systems
| 428 | A. K. Das, V. P. Roham and P. S. Diwane | Depth Of Weld Defects Using An Ingenious Gadget In Radiography
| 457 | Shivaramu and V. Ramprasath | Gamma Ray Scattering Non-Destructive Examination
| 470 | P. R. Vaidya, L. G. Khanolkar and P. G. Kulkarni | Determination Of Ultimate Resolution In Screen Fluoroscopy Using Microfocal Projection Magnification
| 502 | Chin-Min Chang, Yih-Kuen Chen, Hong-Yie Chen & Chih-Han Wang | Uncertainty And Reliability Of The Nondestructive Testing System
| 516 | N. Dhanasekaran, M. Manimohan, M. S. Ramachandran & P. S. Subramanyam | Process Control Of Industrial X-Ray Film Processing - A Study
| 532 | B. B. Bayak and B. S. Acharya | Identification Of 21-R Polytype In Plasma Synthesized Sic By Xrd
| 551 | N. Manimohan, N. Dhanasekaran, R. J. Pardikar and P. S. Subrahmanyam | Dosimeter As An Additional Aid To Calculate Exposure Time In High Energy Radiography
| 627 | B. Venkataraman, S. Saravanan, T. Jayakumar, P. Kalyanasundaram and Baldev Raj | Performance Evaluation Of Real Time Radiographic Systems
| 632 | S. Saravanan, B. Venkataraman, T. Jayakumar, P. Kalyanasundaram and Baldev Raj | NDE Of Ceramic Insulator Blanks By Radiography
| Tomography (X-Ray and Gamma Ray) | 43 | V. N. Filinov, V. Y. Maclashevsky, V. V. Kljuev | The Diagnostic Of Faulty Aircraft Micro Objects By Means Of Computerized Tomography
| 131 | Takahiro Kanamori | Density Measurement By A High Energy X-Ray Ct System
| 142 | Peter Wells, John Davis, Brendan Kirby, Andrew Cramond and Neil Fillingham | Quantitative Computed Tomography
| 143 | John Davis, Seu Som, Imants Svalbe, Jason Grant, Ergad Gold*, Kenneth Tsui and **Peter Wells | The Glass Log Project: Grade Evaluation And Defect Location Using X-Ray Computed Tomography
| 144 | Jason Grant, John Davis, Michael Morgan and Peter Wells | X-Ray Diffraction Tomography: Image Reconstruction And Applications
| 234 | Ch. Sauerwein, W. Nuding, R. Grimm, H. Wiacker | Advanced Real Time Radioscopy And Computed Tomography
| 479 | P. K. Khatri, G. L. Baheti, Nisheet Saxena and K. C. Songara | Performance Evaluation Of Gamma Ray Scanner For Tomographic Imaging
| 480 | G. L. Baheti, P. K. Khatri, Nisheet Saxena and L. R. Meghwal | Statistical Parameter Estimation Of A Gamma Ray Tomographic Scanner System For Quality Assurance
| 639 | C. Babu Rao, V. S. Ravichandran*, P. Munshi**, Baldev Raj | Effect Of Object Functions On Tomographic Reconstruction A Numerical Study
| 716 | Kong Fangeng*, and Xian Wu** | Application &Amp; Development Of Industrial Computed Tomography In China
| Neutron Radiography | 442 | S. Gangotra, P. M. Ouseph, A. M. Shaikh* and K. C. Sahoo | Neutron Radiography Of Contact Location Of Irradiated Zircaloy-2 Pressure Tube From Raps-Ii
| 491 | G. L. Baheti, P. K. Khatri, K. C. Songara and V. L. Meena | Thermal Neutron Beam Modification Studies Using An Isotope Based Neutron Radiography Facility
| 494 | C. Subbiah, K. Venkata Rao, K. Viswanathan and S. K. Athithan | SHAR Centre, ISRO, Sriharikota, India Evaluation Of Pyrotechnic Devices By Neutron Radiography
| 578 | Marton Balasko and Erzesebet* | Progress And Status Of Neutron Radiography And Gauging In Europe
| 699 | B. S. Seshadri | A Mobile D-T Neutron Source For Neutron Radiography
| Optical Methods | 29 | V. R. Ravindran*, A. V. S. S. S. R. Sarma**, V. U. Nayar*** | A Fringe-Spacing Analysis Technique For The Interpretation Of Holographic Nondestructive Testing (Hndt) Data
| 111 | Jiantang Zhu | Measurement Of Poisson'S Ratio Of Non-Metallic Materials By Laser Holographic Interferometer
| 195 | S. Devolder, M. Wevers, P. De Meester, O. Leroy*, *K. U. Leuven Campus Kortrijk | Material Research Using The Accousto-Optic Technique
| 237 | M. A. Razumova and A. D. Suprun | Problems Of Non-Linearities In Laser Stimulated Non-Destructive Heat Treatment Of Surface
| 290 | Popoudina S. A., Kashirin Y. V., Stabrovskaya I. A., Zaytsev B. L | Metrological Confirmation Of Equipment For Non Destructive Testing
| 419 | K. Habib | Techniques Of Optical Interferometry In Corrosion Laboratory
| 426 | A. V. S. S. S. R. Sarma, V. R. Ravindran, P. S. Mani and S. A. Pillai | Holographic Tomography Using Image Processing
| 434 | A. V. S. S. S. R. Sarma, P. S. Mani, S. A. Pillai, V. R. Ravindran and K. V. Rajendran | Holographic Quantitative Non-Destructive Evaluation (NDE)
| 563 | Anand Asundi | Fiber Optic Polarimetric Sensor (Fops) For Damage Detection In Composites
| 614 | G. C. Pandey*, A. C. Boccara** and D. Fournier** | Nondestructive Evaluation Of Materials By Photothermal Based Techniques: An Overview
| 638 | C. Babu Rao, A. V. Ananthalakshmi and R. Kesavamoorthy | Localization Of Region Of Surface Roughness Of Thin Wires Using Laser Scattering
| 641 | D M Findeis and J. Cryzagoridis | Inspecting Glassfiber Reinforced Plastic Piping Using Portable Espi And Shearography
| 681 | V. M. Murukeshan, A. R. Ganesan and R. S. Sirohi | Design And Development Of A Compact Fiber Optic Phase Shifting Espi System For Engineering Metrology
| Thermography | 385 | EXPERIENCES AT TATA STEEL | Condition Monitoring By Thermography Helps Improving The Reliability Of Steel Plant Equipment -
| 398 | N. S. Ramakrishnan and S. N. Narayanacharyulu | Infrared Imaging For Condition Monitoring Of Lt Switchgear
| 615 | G. C. Pandey and Ajay kumar | Modern-Infra-Red Spectroscopy: A Tool For Noncontact And Nondestructive Evaluation With Special Reference To Process Monitoring.
| 685 | Italo Meroni - Valter Esposti | Pre-Diagnosis And Non-Destructive Instrumental Diagnosis In Building: A Case History
| Microwave NDE | 76 | Zhou Liping, Xu Deming*, and Li Zhaoning* | Open Resonator Method For The Nondestructive Test Of Dielectric Materials At Microwave Frequency
| 140 | Oleg O. Drobakhin, Mikhail V. Andreev, and Dmitry Yu. Saltykov | Dielectric Layered Structure NDT By Multi Frequency Target Discrimination Methods In Microwave Range
| 141 | Oleg O. Drobakhin, Valentine F. Borulko, and Vladimir A. Karlov | Apparatus For Microwave NDT Of Dielectric Materials By Multi Frequency Methods
| 295 | N. Lubetsky, E. Maksimovich | Microwave Nondestructive Testing Of Composite Materials Using Polarization Interferometry
| 499 | Institute of Nuclear Energy Research | A Microwave Method For Detection Of Finite Surface Cracks In Metals Chin-Yung Yeh
| Magnetic Techniques | 6 | Vladimir F. Matyuk | Designing Principles Of Means For Automated Nondestructive Testing Of Sheet Steel In Motion By Pulse Magnetic Method
| 7 | Vladlen D. Piunov, Vladimir F. Matyuk, Valery B. Kratirov | Localization Of The Field Of Residual Magnetization At Magnetic Testing Of Mechanical Properties Of Welded Joints
| 68 | Zhong Wei-Chang | Analytic Expression For The Magnetic Leakage Field Inside And Outside Of A Slot On The Cylindrical Surface Of A Disc
| 123 | Xu Jiazhen, Xu Shufa*, Liu Yueming** | Computation Of Exchange Integral And Quantitative Indication Of Ferromagnetism
| 150 | Li Luming Zhang Jiajun Li Zhenxing Shao Xiaoyan | Using Finite Element Method To Optimize Magnetic Flux Leakage Testing
| 151 | Li Luming Zhang Jiajun Li Zhenxing Wang Yong | A New Kind Of Amorphous Alloy Magnetic Sensor Used For Magnetic Testing
| 153 | Li Luming and Zhang Jiajun | A New Method To Increase Hall Probe'S Sensitivity
| 182 | H. K. Tonshoff, B. Karpuschewski, C. Regent | Micromagnetic Surface Integrity Analysis Of Ground Workpieces With Different Heat Treatment
| 209 | Thomas Aastroem | Mapping Of Magnetic Flux And Field Distributions In And Outside A Hand Yoke
| 259 | Li qiang Yuan Zuyi Miao Longxiu | Evaluating The Fatigue Damage Of Material By Using Barkhausen Noise Method
| 292 | S. G. Sandomirskii | Theory And General Principles Of Designing The Means For Nondestructive Magnetic Testing Of Mechanical Properties For Large-Scale Manufacturing Products.
| 312 | Guo Yusheng | Development Of Cxg-2 Magnetic Particle Inspection Equipment For Annuluses
| 382 | Indranil Chattoraj and Amitava Mitra | Micromagnetic Studies On Hydrogenated Steels
| 411 | Kazuyoshi Sekine and Akira Iizuka | An Improved Method Of Magnetic Flux Leakage Inspection For Far- Side Corrosive Type Defects Of Ferromagnetic Specimens
| 572 | S. Mandayam, S. S. Udpa, L. Udpa and W. Lord | Inverse Problems In Magnetostatic NDE
| 583 | M. Arumugam, T. Rethnapandian, G. Raju, N. Girijan and S. Mahadevan | Effect Of Surface Roughness On Cadmium Plating Thickness Measurement Using Magnetic Methods
| 624 | V. Moorthy, S. Vaidyanathan, T. Jayakumar and Baldev Raj | Evaluation Of Carburization Depth In Service Exposed Ferritic Steel Using Magnetic Barkhausen Noise Analysis
| 646 | R. Grimberg, A. Savin, S. Chifan, S. Leitoiu | Incremental Permeability Method - One Option For Non-Destructive Evaluation Of Boilers Tubes
| 710 | G. V. Prabhu - Gaunkar*, and Robert M. Fix** | Application Of Barkhausen Noise Measurements For The Evaluation Of Surface Integrity Of Components: Some Case Studies
| Electrical and Electromagnetic Testing Techniques | 24 | Wan Guoqing and Fan Jingyun | Rapid Electromagnetic Nondestructive Testing Of The Composition, The Hardness And The Cracks Of Steel And Iron
| 52 | Masumi Saka, Daisuke Hirota and Hiroyuki Abe | Enhancement Of Sensitivity Of The Potential Drop Technique For Sizing A Crack By Using Closely Coupled Probes
| 101 | Lin Jun Ming*, Lin Chun Jing* and Chen Kai Hui** | Development Of The Multi-Frequency Multi-Channel Digital Eddy Current Instrument
| 132 | Dmitry V. Lychagin, Anatoly A. Klopotov | Evaluation Assurance Of Alloys On The Basis Of Electrical Conductivity And Analysis Of Structural Changes After Thermal Treatment
| 199 | Petr N. Shkatov, Victor E. Shaternikov, Eduard V. Maksimov | Electromagnetic Method Of Bearings Technical State Diagnostics In The Process Of Their Usage
| 368 | V. Khandetsky, V. Kostyrko and V. Gerasimov | Eddy Current Control Of Surface Defects In Carbon Fibers Composites
| 429 | Dominic Joseph, K. M. Verghese and R. E. Darange | Application Of Electrical Impedance For Detection Of Debonding In Dented Honey Comb Structures
| 521 | Rajeev Kumar, Alex Varughese and A. K. Dhawan | Laboratory Resistivity Test On Coke Breeze Samples
| 565 | M. Stolzenberg and K. Berner | Fully Automatic Testing Device For Backup Rolls With Ultrasonic And Eddy Current
| 604 | C. Ciora*, L. Csaszar**, M. Disque***, I. Chiose+ | In-Line Eddy Current Inspection Of Steel Ingots
| 620 | Vivek B. Kavishwar | Applications Of Eddy Current Metal Sorting In Automobile Industry
| 62 | D. S. Dulay, C. Galsworthy, D. J. Lovejoy | Progress In The Eddy Current Inspection Of Tubes: The New Breed Of Fast, Computer Based Systems For The In-Service Inspection Of Tubes
| 75 | A. Fedorov, V. Popov, V. Gorsky, A. A. Bochvar* | Eddy-Current Evaluation Of Fuel Element Zirconium Alloy Cladding Tubes
| 162 | Soon Ju Kang, Yu Rak Choi, Hee Gon Woo, * Seong Su Choi* | Seed-A Distributed Data Base Architecture For Global Management Of Steam-Generator Tube Inspection Data In Nuclear Power Plant
| 325 | Mohamad Behravesh, Gary Henry*, Douglas Harris ** | Us Program For Qualification Of Eddy Current Techniques And Personnel For Inspection Of Nuclear Steam Generator Tubes
| 394 | P. Vijayaraghavan, B. N. Sreenivasa Murthy and C. Ramachandra | An Approach In Developing Close Range Calibration Standards In Aluminium Alloys For Eddy Current Conductivity Measurements Of Aerospace Components
| 400 | Ashok J. Trivedi and Rajul R. Parikh | In-Situ Eddy Current Inspection Of Heat Exchanger Tubes
| 619 | Pravin Dhole, and Vivek Kavishwar | Eddy Current Testing Of Tubes For In Process Quality Of Erw And Seamless Tubes
| 621 | Parag R. Abhyankar*, and Vivek B. Kavishwar** | A Study On Eddy Current Testing Of Double Walled Copper Brazed Tubes
| 623 | M. T. Shyamsunder, B. P. C. Rao, C. Babu Rao, T. Jayakumar, P. Kalyanasundaram and Baldev Raj | Studies On Defect Delectability In Banded Stainless Steel Tubes
| 45 | Y. K. Fedosenco | Methods Of Improving The Meteorological Characteristics Of The Eddy Currents Defectoscopes With The Through Type Transducer
| 242 | Remy La, Bruno Benoist, Regis Lengelle*, Paul Gaillard*, Jacques Reuchet** | An Eddy Current Parametric Model For Flaw Characterization
| 326 | Pierre-Olivier GROS | Numerical Modelling Of Eddy Current Steam Generator Inspection: Comparison With Experimental Data
| 345 | R. Grimberg, A. Savin, O. Mihalache, S. Chifan | Holographic Images Of Discontinuities By Using An Eddy Current Transducer With Orthogonal Coils
| 346 | R. Grimberg, A. Savin, O. Mihalache, E. Radu | Flow Shape Reconstruction By Means Of Eddy Current Transducer With Orthogonal Coils
| 363 | C. Gonz et. al | Eddy Current Conductivity Profile For Metallic Multilayered Media Using A Simulated Annealing Algorithm
| Imaging for NDE Applications | 9 | Valery L. Vengrinovich | Some Approaches To A Priori Knowledge Account In Inverse Problems Of Quantitative Nondestructive Evaluation
| 146 | D. Datta, N. N. Kishore*, P. Munshi* | Automated Nondestructive Evaluation Of Composite Specimen By Fractal Analysis
| 232 | Gilles Corneloup, Joseph Moysan, Vincent Ganier, Cecile Gueudre | Image Analysis Dedicated To The Non-Destructive Examination Of Structural Materials
| 581 | K. Aravindhan and K. Rajagopal | Image Reconstruction From Incomplete Projections Data: A Multi Resolution Modelling Approach
| 586 | Hirunobu Yuki, Haruo Ishikawa and Yasuji Wakiyama | Fractal Characteristics Of Delamination In Cfrp Laminates
| 654 | Shuichi Fukuda | Separating Of Images Of Nature And Artifacts Using Fractal Dimension
| Signal Processing and Expert Systems | 262 | Detlef Mampel and Asoke K Nandi | Comparative Study Of Deconvolution Algorithms
| 364 | H. B. Patel | Building Intelligent Nondestructive Testing And Evaluation Systems By Digital Signal Processing Techniques
| 507 | P. Munshi | Fourier Vision In NDT
| 601 | V. K. Sinha and V. B. Reddy | An Expert System For Defect Analysis
| 705 | Sekhar Tangirala*, and Asok Ray | Stochastic Modeling Of Fatigue Cracks For Real-Time Monitoring &Amp; Prognostics
| 720 | Vinay Dayal | Non-Destructive Evaluation: Statistical Approach
| Artificial Neural Networks | 174 | E. Altschuler**, H. Gavarini*, R. P. J. Perazzo, A. Pignotti**, S. L. Reich** | Neural Network For The Mfl Inspection Of Steel Tubes
| 260 | A C McCormick and A K Nandi | Rotating Machine Condition Monitoring Using Neural Networks
| 304 | Ma Yukuan | The Processing Of Ae Signal Based On Artificial Neural Network
| 306 | Ma Yukuan, Li Jialin, Dong Yunzhao | The Detecting Procedure Of Ae Signal Under High Background Noise Based On Artificial Neural Network
| 341 | Belle R. Upadhyaya, Mohamad M. Behravesh*, Wu Yan1 and Gary Henry* | An Automated Diagnostics System For Eddy Current Analysis Using Artificial Intelligence Techniques
| 359 | R. S. D. Wahidabanu and M. A. Panneer Selvam | NDE Of Electrical Insulation Using Genetic Algorithm Based Artificial Neural Nets
| 431 | S. Kumudha, Y. G. Srinivasa and R. Krishnamurthy | Application Of Artificial Neural Network And Fuzzy Logic For Nondestructive Testing In Machining
| 570 | V. P. Lunin and V. A. Barat | Crack Depth And Angle Oblique Evaluation By A Neural Network With Simulated Training Data
| 636 | M. T. Shyamsunder, C. Rajagopalan, K. K. Ray *, T. Jayakumar, P. Kalyanasundaram and Baldev Raj | Characterisation Of Eddy Current Signals Using Different Types Of Artificial Neural Networks
| Training, Certification and Standards | 61 | D. S. Dulay, C. Galsworthy, D. J. Lovejoy | Training And Personnel Certification For NDT
| 124 | Xu Jiazhen, Liu Yueming*, Xu Shufan** | A Discussion Of Some Problems Of Magnetic Particle Detection Standard
| 125 | Liu Lianzhong, Xu Shufan*, Xu Jiazhen** | The Selecting Of Magnetization Standard In Magnetic Detection
| 200 | G. Aufricht and H. Theiretzbacher | The Vienna Agreement Is A Useful Economical Tool To Make Progress In Harmonizing International Standardisation
| 202 | U. Ewert, H. Heidt, D. Schnitger | New European Standards In Industrial Radiology
| 212 | Bart Vaessen, Peter Willems, Luc Heremans, Leo Van Bellegem | Industrial Radiography - Future Of Standards And Technology
| 288 | Levkovich V. V., Zinovjeva S. I. Engineering Centre "CERTICO" | Certification Of NDT Personnel In The Republic Of Belarus
| 289 | Orsa E. N., Nikiforova Z. S., Popoudina S. A | Standardization Of Methods In Non Destructive Testing For Dangerous Installation
| 393 | P. Vijayaraghavan, H. S. Ganesha and T. Rangachari | Calibration And Process Control Check Requirements In Non- Destructive Testing - A Review
| 395 | S. Sampath Kumar, G. S. Kandasamy* and N. S. Venkataraman** | Experimental Investigation Of Sensitivity Of Acoustic Emission Technique With Other Tool Wear When Turning Alloy Steel With Coated Tool
| 569 | V. P. Lunin and S. V. Kirsanov | Introducing Model-Based Approach For Educational Purposes In Electromagnetic Inspection Curriculum
| 616 | Tarapada Pyne | A Universal Approach To Making Of A Diagnostic Man In The Changing Maintenance Scenario: An Industry/institute Challenge
| 645 | R. Grimberg*, A. Stanciu*, D. Scripcaru* | Certification Of NDT Personnel Nd Accreditation Of NDT Laboratories In Romania
| 653 | Shuichi Fukuda | Developments Of Nondestructive Evaluation Date Bases: The Outline Of The Activities At Jsndi
| 674 | A. N. B. Ibrahim | Qualification And Certification Scheme For NDT Personnel In Malaysia
| 702 | Md. Sana Ullah | Prospects And Status Of Non-Destructive Testing And Evaluation In Bangladesh
| NDE and Quality Assurance | 314 | R. P. Singh, E. Madhav Rao, T. Singh and J. P. Misra* | Quality Control By Radiography
| 358 | R. S. D. Wahidabanu, M. Gopalakrishnan and M. A. Panneer Selvam | Quality Control Of Power Apparatus Through Non-Destructive Test Measurements And Evaluation
| 370 | T. N. Gangadharan and P. S. Subrahmanyam | Improvement Of Non-Destructive Examination Effectiveness On Pressure Vessels With Quality Assurance
| 515 | K. Shanmugam, R. Chandramohan and M. K. Ramamurthy | Quality Assurance Experience In The Manufacture Of Pfbr Reactor Vessel During Technology Development Work
| 520 | R. K. Chaudhary, M. Gupta and A. K. Dhawan | Non-Destructive Techniques - A Review
| 562 | J. C. Pandey, G. Kaur, A. S. Prasad and O. N. Mohanty | Quality Assessment Of Rolls: Use Of Ultrasonic Back-Scatter Technique
| 573 | R. Subbarayan and M. P. Patil | Control Measures For NDE And Quality In Project Construction
| 576 | A. N. Nandakumar, R. Kannan*, V. K. Kathuria and M. S. S. Murthy | Quality Assurance For Gamma Radiography Exposure Devices
| 591 | P. Srinivasa Rao | Some Simple Techniques For Quality Assurance Through NDT
| 608 | Kaj Kvisgaard Borum and Hans Erik Gundtoft | A New Documentation System As Part Of Quality Assurance In Non- Destructive Testing
| NDE on Internet | 590 | R. Visweswaran | Global Information System And Internet For Science And Technology
| | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||