Saturday 15 September 2001
8.00am-5.00pm	AINDT Certification Board Meeting		Rydges – Suite 114
6.30pm-10.30pm	Board Members Dinner		Rydges – Boulevard Room B1
Sunday 16 September 2001
8.00am-5.00pm	AINDT Federal Council Meeting		Rydges – Boulevard Room B2
Monday 17 September 2001
8.00am-5.00pm	ICNDT Committee Meeting		Rydges – Boulevard Room B3
9.00am-12.30pm	AINDT/WTIA NDT Technical Demonstration Forum at BP Bulwer Refinery		Departs BCEC Main Entrance
1.00pm-5.00pm	Boeing Site Visit to Amberley Air Force Base		Departs BCEC Main Entrance
4.00pm-7.00pm	Conference Registration Desk Opens		Plaza Foyer
6.00pm-8.00pm	Welcome Cocktail Reception Sponsored by AGFA & Opening of the Trade Exhibition		Room P6
Tuesday 18 September 2001
7.30am	Conference Registration Desk & Trade Exhibition Opens		Plaza Foyer
8.30am-10.00am	Opening Ceremony – Address by A-PCNDT attending Nations & AGFA Chairman – John Maccarone		Room P1 & P2
10.00am-10.45am	Plenary Lecture – Professor Dennis Else		Room P1 & P2
10.45am-11.15am	Morning Tea & Trade Exhibition		Room P6
	1.1 Methods & Instrumentation		Room P1 & P2
11.15am-11.30am	Principal Sponsor Address: AGFA Representative
11.30am-12.15pm	Dr Michael Farley, SCOTLAND	KEYNOTE: Achievement & Reliability of Non-Destrucitve Testing
12.15pm-12.45pm	Mr Gary Barber, AUSTRALIA	Digital Imaging Techniques/Solutions
12.45pm-1.15pm	Mr Lui Bin, P.R.CHINA	Convenient Detection of Deep Defects in Steel with Portable Instruments
	1.2 Aerospace		Room P3 & P4
11.15am-11.30am	Gold Sponsor Address: BP (Bulwer Refinery) Representative
11.30am-12.15pm	Dr Gary Georgeson, USA	KEYNOTE: NDT - A Continueing Responsibility in the Future of Aerospace
12.15pm-12.45pm	Ms Terri Lynn Adair, USA	Automated Fluorescent Penetrant Inspection System (FPI) is Triple A
12.45pm-1.15pm	Dr Les Bennett, CANADA	Neutron Radioscopy Inspection of Composite Flight Control Surfaces
1.15pm-1.20pm	Lunch Sponsor Address: Department of Mines & Energy		Room P6
1.20pm-2.15pm	Conference Lunch Sponsored by Department of Mines and Energy Trade Exhibition		Room P6
	2.1 Industrial Plant & Structures		Room P1 & P2
2.15pm-2.30pm	Silver Sponsor Address: Krautkrämer GmbH
2.30pm-3.15pm	Mr Chris Smallbone, AUSTRALIA	KEYNOTE: NDT and It's Importance to Industrial Plants and Equipment
3.15pm-3.45pm	Dr Stephen Burke, AUSTRALIA	Crack Depth Measurement using Eddy-Current NDE
3.45pm-4.15pm	Dr Chen Guohua, P.R.CHINA	The Advancement of NDT Technology and its Application in the Safety Assessment of Pressure Vessels
	2.2 Manufacturing		Room P3 & P4
2.15pm-2.30pm	Silver Sponsor Address: Queensland Government Department of Industrial Relations
2.30pm-3.15pm	Mr Douglas Marshall, CANADA	KEYNOTE: NDT Overview - Equipment Reliability
3.15pm-3.45pm	Mr Douglas Whitely, CANADA	Infrared Thermography Applications at Dofasco Inc.
3.45pm-4.15pm	Mr Keiji Sato, JAPAN	Non-destructive Evaluation of Disbonding Area in Chip Scale Packages using Resonance Ultrasound Spectroscopy
4.15pm-4.45pm	Afternoon Tea & Trade Exhibition		Room P6
	3.1 Methods & Instrumentation		Room P1 & P2
4.45pm-5.15pm	Mr Neile Findlay, AUSTRALIA	Automated Ultrasonic Rotoscan Weld Inspection – ‘AGL – Roma to Brisbane Stage & Gas Looping Pipeline Constructed by Clough/Lucas
5.15pm-5.45pm	Mr Lijian Yang, P.R.CHINA	Noise Reduction and Data Compression of Pipeline Magnetic Flux Leakage Signal Based on Wavelet Transform
	3.2 Fundamental & Applied Research		Room P3 & P4
4.45pm-5.15pm	Mr Joakim Axmon, SWEDEN	Partial Modal Analysis for Health Assessment of Living Trees
5.15pm-5.45pm	Dr Chih-Hung Chiang, TAIWAN	Semi-direct Measurements of Ultrasonic Pulse Velocity in Proposed Concrete Reference Specimens
5.00pm	Conference Registration Desk & Trade Exhibition Closes		Plaza Foyer & P6
Wednesday 19 September 2001
8.00am	Conference Registration Desk & Trade Exhibition Opens		Plaza Foyer
	4.1 Training, Certification & Codes		Room P1 & P2
8.30am-8.45am	Silver Sponsor Address: HRL – ETRS
8.45am-9.30am	Mr Giuseppe Nardoni, ITALY	KEYNOTE: The role of ICNDT and Regional Groups in the harmonisation process for training & certification.
9.30am-10.00am	Mr Shane Flynn, AUSTRALIA	Development of National Competency Standards for NDT within Australia
10.00am-10.30am	Mr Brett Hyland, AUSTRALIA	Non-Destructive Testing Laboratory Accreditation – Australian Advancements
	4.2 Fundamental & Applied Research		Room P3 & P4
9.30am-10.00am	Dr Guy Cotterill, AUSTRALIA	A New Approach to Ultrasonic Inspection of Shafts
10.00am-10.30am	Mr G C Das, INDIA	Radiography of Thin Sections of Aluminium and Composites with Americium-241 and X-RAYS
	4.3 Industrial Plant & Structures		Room P5
9.30am-10.00am	Mr Peter Hayward, NEW ZEALAND	Detection and Sizing of Cracking from the Inner Surface using ID Creeping Waves
10.00am-10.30am	Dr Baldev Raj, INDIA	Synergism of NDE & IT: A Generic Knowledge-base System for Effective and Reliable NDE
10.30am-11.00am	Morning Tea & Trade Exhibition		Room P6
	5.1 Industrial Plant & Structures		Room P1 & P2
11.00am-11.15am	Silver Sponsor Address: Panametrics
11.15am-12noon	Dr Baldev Raj, INDIA	KEYNOTE Nuclear: A Perspective on Development in NDE to Enable a Safe & Reliable Nuclear Power Industry
12noon-12.30pm	Mr Ray Kot, AUSTRALIA	Hydrogen Attack, Detection, Assessment and Evaluation
12.30pm-1.00pm	Dr Li Luming, P.R. CHINA	Inspecting the Inner Corrosion Defects by Magnetic Flux Leakage Testing Method
	5.2 Fundamental & Applied Research		Room P3 & P4
11.00am-11.15am	Silver Sponsor Address: PNDT Pty Ltd
11.15am-12noon	Dr Stephen Burke, AUSTRALIA	KEYNOTE: Fundamental & Applied Research
12noon-12.30pm	Mr Masatoshi Futakawa, JAPAN	Stress-Strain Relationship Evaluated by Load-Depth Curve Obtained from Indentation Technique
12.30pm-1.00pm	Ms Cayt Harding, AUSTRALIA	Probabability of Detection for Magnetic Rubber Inspections of F-111 Steel Components
	5.3 Training, Certification & Codes		Room P5
12noon-12.30pm	Dr Gary Martin, AUSTRALIA	Training, Certification for Non-Destructive Testing: What is all the fuss about?
12.30pm-1.00pm	Mr Morio Onoe, JAPAN	NDTML – XML for NDT
1:00pm-1:30pm	AINDT Annual General Meeting		Room P5
1.00pm-5.00pm	A-PCNDT Member Nations Meeting		Rydges – Boulevard Room B3
1.00pm-2.00pm	Conference Lunch & Trade Exhibition		Room P6
	6.1 Aerospace		Room P1 & P2
2.00pm-2.30pm	Dr Rong S Geng, P.R. CHINA	Corrosion-related Acoustic Emission and Its Identification
2.30pm-3.00pm	Mr Colin Hockings, AUSTRALIA	Infrared System Specifications – What does it all mean?
3.00pm-3.30pm	Mr Geoff McDonald, AUSTRALIA	Thinking-Feeling – Extraversion-Introversion -Testing Without Self-Destructing
	6.2 Fundamental & Applied Research		Room P3 & P4
2.00pm-2.30pm	Mr Harry Siu-Lung Ku, AUSTRALIA	Applications of Microwaves in Non-Destructive Testing
2.30pm-3.00pm	Mr Umesh Kumar, INDIA	3D Tomographic Visualisation of an Aluminium Manifold Speciman on Experimental Gamma-Ray Tomographic System
3.00pm-3.30pm	Mr Li Lin, P.R.CHINA	Nondestructive Differentiating Three Transformation Products in Low Alloy Steel with Two Ultrasonic Methods
	6.3 Training, Certification & Codes		Room P5
2.00pm-2.30pm	Mr Peter Sheedy, AUSTRALIA	Certification in the New Millennium
2.30pm-3.00pm	Mr John Thompson, UK	Approval of NDT Personnel Under the Provisions of the European Pressure Equipment Directive
3.00pm-3.30pm	Mr Udo Schlengermann, GERMANY	A Global View on Standardisation in Ultrasonic Testing
3.30pm-4.00pm	Afternoon Tea & Trade Exhibition		Room P6
	7.1 Industrial Plant & Structures		Room P1 & P2
4.00pm-4.30pm	Dr Mikhail Podlevskikh, RUSSIA	New Acoustic-Emission Systems for Different Objects Including Underwater
4.30pm-5.00pm	Mr Anthony Rolland, AUSTRALIA	The Astute Thermographer – How Can He Help?
5.00pm-5.30pm	Dr Li Luming, P.R. CHINA	The Magnetic Leakage Field of Surface Crack under Geomagnetic Excitation
	7.2 General		Room P3 & P4
4.00pm-4.30pm	Mr Roger Griffiths, AUSTRALIA	Safety Issues in the Management of Industrial Radiography
4.30pm-5.00pm	Ms Christine Ianna, AUSTRALIA	Non-Destructive Techniques Used in Materials Conservation
5.00pm-5.30pm	Mr Dong Shang Yuan, P.R.CHINA	The Ultrasonic Test Problem of In-service Super-high Pressure Crystal Autoclave
	7.3 Aerospace		Room P5
4.00pm-4.30pm	Mr David G. Moore, USA	Interlayer Crack Detection Results Using Sliding Probe Eddy Current Procedures
4.30pm-5.00pm	Mr Gerry Redmond, AUSTRALIA	From ‘Safe Life’ to Fracture Mechanics – F111 Aircraft Cold Temperature Proof Testing at RAAF Amberley.
5.00pm-5.30pm	Mr Howard Morton, AUSTRALIA	Fatigue Testing – It’s Role in Non-Destructive Testing
5.00pm	Conference Registration Desk & Trade Exhibition Closes		Plaza Foyer and P6
Thursday 20 September 2001
8.00am	Conference Registration Desk & Trade Exhibition Opens Plaza Foyer		Plaza Foyer and P6
	8.1 Industrial Plant & Structures		Room P1 & P2
8.30am-9.00am	Mr Tony Sonneveld	Alex Wilson Memorial Lecture
9.00am-9.30am	Mr Donald Searle, AUSTRALIA	Detection and Measurement of Reformer Tube Creep
9.30am-10.00am	Mr Gongtian Shen, P.R. CHINA	Infrared Thermography Test for High Temperature Pressure Pipe
10.00am-10.30am	Mr Stuart Webber, AUSTRALIA	Five Years of Testing using the Semi-Automated Ultrasonic Time of Flight Diffraction System
	8.2 Fundamental & Applied Research		Room P3 & P4
9.00am-9.30am	Dr Xiaoming Jian, KOREA	Characterization of Imperfect Interfaces in IC Packaging using Deconvolved Ultrasonic Signals
9.30am-10.00am	Dr Yang Ju, JAPAN	NDE of Closed Fatigue Crack on the Metal Surface by Microwaves
10.00am-10.30am	Mr Jung-Heun Kim, KOREA	Kaiser Effects in Thermo-Acoustic Emissions from Carbon Fiber/Epoxy Laminates
	8.3 Nuclear		Room P5
9.00am-9.30am	Dr Jae Hee Kim, KOREA	RISYS: An Advanced Reactor Vessel Inspection System with Underwater Mobile Robots
9.30am-10.00am	Dr Tae Ryong Kim, KOREA	Ultrasonic Measurement of Calandria Tube Sags in a Korean PHWR’s
10.00am-10.30am	Dr Jong Po Lee, KOREA	Ultrasonic Data Acquisition and Analysis System for the Reactor Vessel Inspection Robot Guided by Laser
10.30am-11.00am	Morning Tea & Trade Exhibition		Room P6
	9.1 Industrial Plant & Structures		Room P1 & P2
11.00am-11.30am	Ms Zahra Amrollahi, IRAN	Quality Control of Industrial Centres to X-, Beta and Gamma Rays During Radiography in Iran
11.30am-12noon	Mr Rob Angus, AUSTRALIA	Condition Assessment of Drafting Roller Circles
12noon-12.30pm	Mr Wang Wu-Ping, P.R.CHINA	Detecting Inner Quality of Foundation Pile with Ultrasonic CT Technology
	9.2 Fundamental & Applied Research		Room P3 & P4
11.00am-11.30am	Dr Kunle Oloyede, AUSTRALIA	Nano-Indentation Assessment of Property Changes in Common Engineering Plastics after Exposure to Microwave Energy
11.30am-12noon	Mr Lijian Yang, P.R. CHINA	Research on intelligent pipeline magnetic flux leakage detector
12noon-12.30pm	Dr Che-Hua Yang, TAIWAN	Broadband Dispersion Behaviour of Wedge Waves
	9.3 Aerospace		Room P5
11.00am-11.30am	Mr Geoff Tipler, UK	Delivery of NDT in the UK Military
11.30am-12noon	Mr Max Wishaw, AUSTRALIA	Comparative Vacuum Monitoring: a New Method of In-Situ Real Time Crack Detection and Monitoring
12noon-12.30pm	Mr Gerry Redmond, AUSTRALIA	Investigation of F111 TF30 Engine Compressor Disk Cracking and Development of a Suitable NDI Procedure at RAAF Amberley
12.30pm-1.30pm	Conference Lunch & Trade Exhibition		Room P6
	10.1 Industrial Plant & Structures		Room P1 & P2
1.30pm-2.00pm	Mr Harry Moss, AUSTRALIA	Life Management Of Above Ground Atmospheric Storage Tanks
2.00pm-2.30pm	Mr Charles Panos, AUSTRALIA	Condition Monitoring - Process Plant Tube Inspection an Ongoing Commitment by Plant Owners and Operators
2.30pm-3.00pm	Dr Li Luming, P.R.CHINA	Research on Measuring Abrasion of Pumping Oil Pipe
	10.2 Methods & Instrumentation		Room P3 & P4
1.30pm-2.00pm	Mr Laurence Dickinson, AUSTRALIA	Testing of Composites Using a Mouse Mounted Acoustic Fibre
2.00pm-2.30pm	Dr Yonghui Zhao, P.R.CHINA	Ground Penetrating Radar Technique and it’s Application in Non-Destructive Testing of Reinforced Concrete
2.30pm-3.00pm	Mr Hiroshi Hoshikawa, JAPAN	A New Eddy Current Surface Probe without Lift-off Noise
	10.3 General		Room P5
1.30pm-2.00pm	Mr Gary Barber, AUSTRALIA	Agfa and the Environment
3.00pm-3.30pm	Afternoon Tea & Trade Exhibition		Room P6
	11.1 Manufacturing		Room P1 & P2
3.30pm-4.00pm	Dr Wolfgang Weber, GERMANY	Automated Ultrasonic Inspection of Semi-Finished Profiles
4.00pm-4.30pm	Professor Joon-Hyun Lee, KOREA	Non-destructive Characterisation of Carbon/Carbon Brake Disks Using Ultrasonics
4.30pm-5.00pm	Mr Masakazu Tane, JAPAN	Change in Elastic Constants with Thermal Embrittlement of Duplex Stainless Steel
	11.2 Methods & Instrumentation		Room P3 & P4
3.30pm-4.00pm	Mr Matthew Ibrahim, AUSTRALIA	Development of Flexible Ultrasonic Waveform Analysis for NDE
4.00pm-4.30pm	Professor Ren Jinlin,P.R.CHINA	Mechanism Study of Metal Magnetic Memory Testing
4.30pm-5.00pm	Dr John Long, AUSTRALIA	Depth-Profile Analysis of Elements by Glow Discharge Optical Emmission Specrometry
5.00pm	Conference Registration Desk & Trade Exhibition Closes		Plaza Foyer and P6
7.00pm-7.30pm	Pre-Dinner Drinks
7.00pm-midnight	Official Conference Dinner & Awards Ceremony
Friday 21 September 2001
8.30am	Conference Registration Desk & Trade Exhibition Opens		Plaza Foyer
	12.1 Methods & Instrumentation		Room P1 & P2
9.00am-9.30am	Mr Shuji Maeo, JAPAN	Development of Portable X-Ray Analyzer (XRF/XRD) for Field Studies
9.30am-10.00am	Mr Udo Schlengermann, GERMANY	Quality management in the Automotive Industry by Ultrasonic Inspection of Welded Joints
10.00am-10.30am	Professor Eisaku Umezaki, JAPAN	Evaluation of Heat-Seal Quality of Liquid Packaging Bags Made of Plastic Films by Infrared Thermography
	12.2 Poster SessionTopic: Fundamental & Applied Research		Plaza Foyer
9.00am-9.15am	Mr Guanping Guo, P.R.CHINA	Study on Moire Phenomenon in Ultrasonic C-scan Image
9.15am-9.30am	Mr Young Kim, KOREA	A Study on the Couplant Effects in Contact Ultrasonic Testing.
9.30am-9.45am	Mr Sung Sik Lee, KOREA	Thickness Evaluation of Pipes Using Density Profile on Radiographs
9.45am-10.00am	Professor Tsung-Tsong Wu, TAIWAN	Non-Destructive Evaluation of Composite Structures Using Laser Ultrasonics
10.00am-10.15am	Professor Ching-Chung Yin, TAIWAN	Determination Of Elastic Constants Of Filament Wound Composite Cylindrical Shells Using Laser-Induced Guided Waves
10.30am-11.00am	Morning Tea & Trade Exhibition		Room P6
	13.1 Fundamental & Applied Research		Room P1 & P2
11.00am-11.30am	Mr Lijian Yang, P.R. CHINA	The application of Wavelet Transform in Magnetic Flux Leakage Teat of Pipeline
11.30am-12noon	Dr Kunle Oloyede, AUSTRALIA	Mapping of Changes Induced by Microwave Heating in a Common Photoelastic Plastic – Towards an Effective Control of Thermal Runaway
12noon-12.30pm	Mr Wei-Chang Zhong, P.R. CHINA	Strip Magnetic Dipole of Finite Length and Magnetic Particle Inspection
	13.2 Poster SessionTopic: Industrial Plant & Structures		Room P3 & P4
11.00am-11.15am	Mr Carlos Desimone, ARGENTINA	Damage Detection on Wires of Ropes Applying Ultrasonic Waves
11.15am-11.30am	Dr Ik Keun Park, KOREA	Nondestructive Evaluation for Degraded Structural Materials of 2.25CR-MO Steel used at High Temperatures by Ultrasonics
11.30am-11.45pm	Mr Steve Shepard, USA	Simultaneous Processing and Analsysis of Multiple Thermographic NDE Data Sequences.
11.45pm-12noon	Mr Geoff Williams, AUSTRALIA	On-Line Tank And Vessel Inspection Using Automated Ultrasonic Scanning.
12noon-12.15pm	Dr Konstantin Yeryomin, RUSSIA	Remote Control of Temperature Influence on Steel Skeletons of Industrial Buildings and Bridge Cranes
	13.2 Poster SessionTopic: Manufacturing		Room P3 & P4
12.15pm-12.30pm	Mr Wang Zicheng, P.R. CHINA	Development of Automatic Ultrasonic Inspection Systems Used in Heavy Rail Manufacture
12.30pm-1.30pm	Conference Lunch		Plaza Foyer
1.30pm	Trade Exhibition Closes		Room P6
	14.1 Fundamental & Applied Research		Room P1 & P2
2.00pm-2.30pm	Mr Wei-Chang Zhong, CHINA	Non-Relevant Indications Along the Base Apex Lines of Work Pieces Magnetized Circumferentially
2.30pm-3.00pm	Mr Zaiqi Zhou, CHINA	Ultrasonic Testing for Spatial Grid Structure Evaluation
3.00pm-3.30pm	Mr Sang Kyun Woo, KOREA	Non-Destructive Testing Method for the Detection of the Internal Defects Inside Concrete
	14.2 Poster SessionTopic: Nuclear		Plaza Foyer
2.00pm-2.15pm	Dr Kee-Ok Chang, KOREA	The Research Activities of Irradiation Damage Evaluation on Reactor Pressure Vessel Materials Using NDE Techniques in Korea
2.15pm-2.30pm	Dr Jong Po Lee, KOREA	Performance Demonstration of Ultrasonic Testing System for Nuclear Power Plant Components in Korea
2.30pm-2.45pm	Dr SamLai Lee, KOREA	The Degradation Evaluation of Reactor Pressure Vessel Materials due to Neutron Irradiation by Ultrasonic Characteristic Analysis
2.45pm-3.00pm	Mr Hung-Fa Shyu, TAIWAN	An Expert System for Auditing of NPP Maintenance
	14.2 Poster SessionTopic: Methods & Instrumentation		Plaza Foyer
3.00pm-3.15pm	Dr Un Su Park, KOREA	Reliability Assessment of Ultrasonic NDE – Results af a Round Robin Test
3.15pm-3.30pm	Mr Wei-Chang Zhong, CHINA	Magnetization of Ferromagnetic Materials in Geomagnetic Field by Mechanical Strain – Prinicple of Metal Magnetic Memory Testing and Diagnostic Technique
3.30pm-4.00pm	Closing Ceremony & Presentation by the Hosts of the 11th A-PCNDT Conference		Room P1 & P2
3.30pm	Conference Registration Desk Closes		Plaza Foyer

Please Note: This program is subject to change without notice.

© AINDT , created by NDT.net

|Home|    |Top|