|
|
Topics
|
|
|
Tu.4.8.1
|
Novel multiplexed eddy-current array for surface crack detection on rough steel surface
Meilland, P., ARCELOR Research, Maisières-lès-Metz (France)
|
Manuscript
|
|
Tu.4.8.2
|
Ultrasonic testing of hot plates using EMAT technology
Ege, M., Institut Dr. Foerster, Reutlingen
(Germany)
Schröder, J., Inst. Dr. Foerster, Reutlingen
(Germany)
Kirikov, A., Kompaniya Nordinkraft, Cherepovets (Russia)
|
Manuscript
|
|
Tu.4.8.3
|
ULTRASONIC STRESS MEASUREMENT: APPLICATION TO WELDED JOINTS
Walaszek, H., CETIM, Senlis (France)
Bouteille, P., CETIM, Senlis (France)
Hoblos, J., CETIM, Senlis (France)
Bourse, G., Ecole des Mines de Douai (France)
Robin, C., Ecole des Mines de Douai (France)
|
Manuscript
|
|
Tu.4.8.4
|
Cleanliness Determination of Hot Strip Steel Samples using a Modified US SAFT Reconstruction
Stolzenberg, M., Salzgitter Mannesmann Forschung, Salzgitter
(Germany)
|
Abstract
|
|
Tu.4.8.5
|
THERMOGRAPHIC CRACK DETECTION IN FERRITIC STEEL COMPONENTS USING INDUCTIVE HEATING
Netzelmann, U., Fraunhofer IZFP, Saarbrücken
(Germany)
Walle, G., Fraunhofer IZFP, Saarbrücken
(Germany)
|
Manuscript
|
|
We.1.8.1
|
Properties of hot rolled strip obtained by calculation or testing - a critical comparison
Stiaszny, P., voestalpine Stahl, Linz (A)
Hubmer, G., voestalpine Industrieanlagen, Linz (A)
Andorfer, J., VOEST-ALPINE STAHL LINZ GmbH , Linz
Hribernig, G., VOEST-ALPINE STAHL LINZ GmbH , Linz
Luger, A., VOEST-ALPINE STAHL LINZ GmbH , Linz
Rendl, K., VOEST-ALPINE STAHL LINZ GmbH , Linz
Samoilov, A., VOEST-ALPINE STAHL LINZ GmbH , Linz
Zeindl, J., VOEST-ALPINE STAHL LINZ GmbH , Linz
|
Manuscript
|
|
We.1.8.2
|
Integration of automated roll-defect detection systems into the operation of roll shops for heavy plate and hot strip mills
Weber, W., ThyssenKrupp Stahl, Duisburg
(Germany)
Bobbert, J., ThyssenKrupp Stahl, Duisburg
(Germany)
Klein, A., ThyssenKrupp Stahl, Duisburg
(Germany)
Tamler, H., ThyssenKrupp, Duisburg
(Germany)
|
Manuscript
|
|
We.1.8.3
|
ADVANCED PROCESS AND QUALITY CONTROL IN HOT ROLLING MILLS USING EDDY CURRENT INSPECTION
Kling, S., Prüftechnik NDT, Ismaning
(Germany)
|
Manuscript
|
|
We.1.8.4
|
Nondestructive testing of mill rolls
Samedov, Y., Demas, Moscow (Russia)
|
Manuscript
|
|
We.1.8.5
|
Magnetic Diagnosis of Metallurgical Equipment Resource Considering a Roll as an Example
Krutikova, L., IntroTest, Moscow (Russia)
Kazuykevich, I., Severstal, Cherepovetz Vologodskoij (Russia)
Bezlyudko, G., Special Scientific Engineering, Kharkov (Ukraine)
|
Manuscript
|
|
P130
|
EXAMINATION OF CHEMICAL-AND-PHOTOGRAPHICAL TREATMENT OF Photoprocessing of Radiographic Industrial Films in Cupric Borohydride Physical Developers
Kalentiev, V., Kazan State Technology University, Kazan (Russia)
Muratov, D.S., JSC Tasma Holding, Kazan (Russia)
Terekhov, P., JSC Tasma Holding, Kazan (Russia)
Khabibullin, A., Kazan State Technology University, Kazan (Russia)
|
Manuscript
|
|
P131
|
RADIOGRAPHIC INDUSTRIAL FILMS USED FOR NON-DESTRUCTIVE TESTING (NDT)
Terekhov, P., JSC Tasma Holding, Kazan (Russia)
Muratov, D.S., JSC Tasma Holding, Kazan (Russia)
Kalentiev, V., Kazan State Technology University, Kazan (Russia)
Khabibullin, A., Kazan State Technology University, Kazan (Russia)
|
Manuscript
|
|
P132
|
NEW DETECTORS FOR X-RAY METAL THICKNESS MEASURING
Artemiev, B.V., Association "Spektr-Group", Moscow (Russia)
Maslov, A., Association "Spektr-Group", Moscow (Russia)
|
Manuscript
|
|
P135
|
On-Line Testing of Thick-Wall ERW Steel Tubes by Eddy-Current Method using High Magnetic Saturation
Ghaemi, M., Iran NDT, Tehran (Iran)
|
without manuscript
|
|
P235
|
Laser Ultrasonics (LUS) for examination of defects in aluminium profiles
Mishina, O., SAPA Technology AB, Finspang (Sweden)
Borg, M., Kimab, Stockholm (Sweden)
Carlson, L., Kimab, Stockholm (Sweden)
|
Manuscript
|
|