|
|
Topics
|
|
|
Mo.2.8.1
|
Power generation in the future – new challenges for non-destructive testing and technical diagnostics
Farley, J.M., Mitsui Babcock Energy Limited, Renfrew (United Kingdom)
|
Manuscript
|
|
Mo.2.8.2
|
Nondestructive Inspection of Blade Roots and Blade Attachment Grooves - Ideal Application of Phased Array Inspection Technique
Rauschenbach, H., Siemens PG, Mülheim a.d. Ruhr
(Germany)
Dumas, P., Imasonic, Besancon (France)
Clossen-von Lanken Schulz, M., Siemens PG, Mülheim a.d. Ruhr
(Germany)
Opheys, M., Siemens PG, Mülheim a.d. Ruhr
(Germany)
|
Manuscript
|
|
Mo.2.8.3
|
ULTRASONIC THICKNESS MEASUREMENT OF INTERNAL OXIDE SCALE IN STEAM BOILER TUBES
Labreck, S., Olympus NDT, Waltham, MA (USA)
Kass, D., Olympus NDT, Waltham, MA (USA)
Nelligan, T., Olympus NDT, Waltham, MA (USA)
|
Manuscript
|
|
Mo.2.8.4
|
Perspectives of EMAT thickness gauging: operational procedures benchmarking and standardization issues
Gori, M., CESI, S.p.A., Milano (Italy)
|
Manuscript
|
|
Mo.2.8.5
|
Ultrasonic Examination by Frequency Analysis for Creep Damage Detection of Boiler Pipings
Hatanaka, H., Ishikawajima-Harima Heavy Industries, Yokohama (Japan)
Nakagawa, H., Ishikawajima-Harima Heavy Industries, Tokyo (Japan)
Uemichi, R., Ishikawajima-Harima Heavy Industries, Tokyo (Japan)
Ido, N., Ishikawajima-Harima Heavy Industries, Yokohama (Japan)
Ito, T., Ishikawajima-Harima Heavy Industries, Yokohama (Japan)
Tagami, M., Ishikawajima-Harima Heavy Industries, Yokohama (Japan)
|
Manuscript
|
|
Tu.3.8.1
|
Active Thermography for Dimensional Measurements on Gas Turbine Components
Goldammer, M., Siemens, München
(Germany)
Heinrich, W., Siemens, Berlin
(Germany)
|
Manuscript
|
|
Tu.3.8.2
|
INFLUENCE OF SUPERFICIAL SCALE IN SIGNAL VARIATION GENERATED BY EMAT ON BOILER TUBES INSPECTION
Boynard, C., ISQ, Porto Salvo Oieras (Portugal)
Dias Lopes, E.M., ISQ, Porto Salvo Oieras (Portugal)
Estanislau, S., ISQ, Porto Salvo Oieras (Portugal)
Pimenta, G., ISQ, Porto Salvo Oieras (Portugal)
|
Manuscript
|
|
Tu.3.8.3
|
Enhanced Inspection of tube to tube-sheet welds in Heat exchanger and JTFA for defect characterization
Marino, A., Procontrol, Milano (Italy)
Carminati, M., Procontrol, Milano (Italy)
|
Manuscript
|
|
Tu.3.8.4
|
On-stream Inspection for High Temperature Hydrogen Attack
Bleuze, A., Metalscan, Saint Remy (France)
Cence, M., Metalscan, Saint Remy (France)
Chelminiak, G., Metalscan, Saint Remy (France)
Schwartz, D., Metalscan, Saint Remy (France)
|
Manuscript
|
|
Tu.3.8.5
|
Transient Vibration Signature Analysis at Steam and Gas Turbines
Südmersen, U., FORTEC-Forschungstechnik, Wunstorf
(Germany)
|
Manuscript
|
|
P160**
|
Mechanized UT Inspection of turbine rotor discs - way to reduce duration time of turbine outages
Rauschenbach, H., Siemens PG, Mülheim a.d. Ruhr
(Germany)
Faber, T., Siemens PG, Mülheim a.d. Ruhr
(Germany)
Opheys, M., Siemens PG, Mülheim a.d. Ruhr
(Germany)
Friedrich, J., Siemens, Berlin
(Germany)
|
Abstract
|
|
P162
|
Advanced NDE in the inspection of gas turbine components
Goldammer, M., Siemens, München
(Germany)
Heinrich, W., Siemens, Berlin
(Germany)
|
without manuscript
|
|
P163
|
Estimation of Debonded Area in Bearing Babbitt Metal by C-Scan Method
Jung, G.-J., Korea Electric Power Research Institute, Daejeon (Korea)
Park, Y., Chungnam University, Deajon (Korea)
Park, S., Korea Electric Power Research Institute, Daejeon (Korea)
Cha, S., Korea South Eastern Power Corporation, Seoul (Korea)
|
Manuscript
|
|