ECNDT 2006


Main Sponsors:

YXLON

RTD

Sponsors:

Helling

GE Inspection Technologies

Sonatest

Olympus NDT

Karl Deutsch

Kodak

Dürr NDT

intelligeNDT

Topics

Process Monitoring

We.1.7.1 Real time in-situ monitoring of metallurgical phenomena with laser ultrasonics
Meilland, P., ARCELOR Research, Maisières-lès-Metz (France)
Damoiselet, F., ARCELOR Research, Maisières-lès-Metz (France)
Nogues, M., ARCELOR Research, Maisières-lès-Metz (France)
Midroit, F., ASCOMETAL CREAS, Hagondange (France)
Manuscript
We.1.7.2 ACOUSTIC EMISSION AND ULTRASONIC INSPECTION FOR THE MONITORING OF CURE RELATED DEFECTS IN THICK RTM PRODUCTS
Heida, J.H., National Aerospace Laboratory NLR, Amsterdam (The Netherlands)
Hart, W., National Aerospace Laboratory NLR, Amsterdam (The Netherlands)
Manuscript
We.1.7.3 Ultrasonic Sensor Tool for Automated Material Inspection in Milling Machines
Schmitt, R., RWTH Aachen (Germany)
Hafner, P., RWTH Aachen (Germany)
Manuscript
We.1.7.4 Fully-Connected Remote Visual Inspection (RVI)
Pellegrino, B., GE Inspection Technologies, Flanders (USA)
Clark, S.R., GE Inspection Technologies, Flanders (USA)
Manuscript
We.1.7.5 EDDY CURRENT INSPECTION TO MEASURE THE DISTRIBUTION OF SILICIUM IN ALUMINUM MOTOR UNITS
Junger, M., Rohmann, Frankenthal (Germany)
Lindecke, L., Rohmann, Caputh (Germany)
without manuscript
Th.3.7.1 Micromagnetic testing for rolled steel
Wolter, B., Fraunhofer IZFP, Saarbrücken (Germany)
Dobmann, G., Fraunhofer IZFP, Saarbrücken (Germany)
Manuscript
Th.3.7.2 QUANTITATIVE NON-CONTACT ULTRASOUND TESTING AND ANALYSIS OF MATERIALS FOR PROCESS AND QUALITY CONTROL
Bhardwaj, M., The Ultran Group, State College PA (USA)
Eischeid, T., The Ultran Group, State College PA (USA)
Vun, R.Y., The Ultran Group, State College PA (USA)
Manuscript
Th.3.7.4 In-line ultrasonic automatic inspection of steel bar products
Garcia Ares, E., INTERLAB IEC, Madrid (Spain)
Alejandro, M.P., INTERLAB IEC, Madrid (Spain)
Blanco, C., INTERLAB IEC, Madrid (Spain)
Garcia Alonso, J.L., INTERLAB IEC, Madrid (Spain)
without manuscript
Th.3.7.5 THE PLAN FOR PULSE MAGNETIC ON-LINE TESTING OF MECHANICAL PROPERTIES OF ROLLED PRODUCTS
Matyuk, V., National Academy of Science of Belarus, Institute of Applied Physics, Minsk (Belarus)
Hartmann, H., Forschungs- und Qualitätszentrum Brandenburg, Eisenhüttenstadt (Germany)
Reichelt, H., Forschungs- und Qualitätszentrum Brandenburg, Eisenhüttenstadt (Germany)
Schmidt, R., Forschungs- und Qualitätszentrum Brandenburg, Eisenhüttenstadt (Germany)
Delendick, M., National Academy of Science of Belarus, Institute of Applied Physics, Minsk (Belarus)
Osipov, A., National Academy of Science of Belarus, Institute of Applied Physics, Minsk (Belarus)
Pinchukov, D., National Academy of Science of Belarus, Institute of Applied Physics, Minsk (Belarus)
Manuscript