| BASIC DATA SHEET (Listed In Inches - In mm) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Probe Size | Calibration Standard Diameters | Probe
| Probe | Size Probe OD | (Max. - Can Vary Depending on Centering Device) NOM
| 1
| 2
| 3
| 4
| 5 | Identification
| 5/8 | 0.460
| 0.530 | 0.438 | 0.484 | 0.531 | 0.578 | 0.625 | Straight Only
| 3/4 | 0.500 | 0.584 | 0.500 | 0.562 | 0.625 | 0.688 | 0.766 | Straight Only
| 1 | 0.750 | 0.950 | 0.800 | 0.860 | 0.930 | 1.000 | 1.070 | 6.75
| 1 - ¼ | 0.790 | 1.280 | 0.930 | 1.145 | 1.340 | 1.535 | 1.730 | Straight Only
| 2 | 1.360 | 1.904 | 1.400 | 1.650 | 1.900 | 2.150 | 2.400 | 6.0
| 2 - ½ | 1.580 | 2.370 | 1.800 | 2.100 | 2.400 | 2.700 | 3.000 | 10
| 3 - ½ | Minimum = 3.02 | 3.300 | 3.100 | 3.300 | 3.500 | 3.700 | 3.900 | Straight Only
| 4 | Minimum = | Straight Only
| 5 | Minimum = 4.40 | 4.880 | 4.460 | 4.600 | 4.880 | 5.090 | 5.300 | Straight Only
| | ||||||||||||
PROBE DATA SAMPLING PARAMETERS
| Resolution Mode | Pitch | (Axial Spacing) Sample Points Per | Revolution Revolutions Per | Minute (RPM) Draw Rate | (Inches Per Sec.) Draw Rate | (Seconds Per 10') Date File | (Per 10' Approx.) Very Low |
0.100 | 180 (80*) | 1800 | 3.00
| 40 Sec. | 464K (206*)
| Low | 0.050
| 180 (80*) | 1800 | 1.50
| 80 Sec. | 928K (412*)
| High | 0.020
| 360 (160*) | 900 | 0.30
| 400 Sec. | 4.3M (1.9*)
| Very High | 0.010 | 360 (160*) | 900 | 0.15 | 800 Sec. | 8.6M (3.8*)
| | Jog Mode | N/A | N/A | N/A | 6.0 | 20 Sec. | N/A
| | |||||
| NDT.net |