code | ABSTRACT
includes links to Full-Text and Options | MATERIALS CHARACTERIZATION | FULL-TEXT
and Options |
|
2 |
USAGE OF BARKHAUSEN EFFECT FOR HARDENING QUALITY CONTROL OF NEAR-SURFACE LAYERS OF TRANSPORT MACHINE PARTS | Michail Budennyy, State Enterprise "malyshev Plant", Ukraine | 267
|
9 |
DAMAGE AND MAGNETIC PARAMETERS OF STEEL AFTER PLASTIC DEFORMATION UNDER HYDROSTATIC PRESSURE | Edward Gorkunov, Institute Of Engineering Science, Russia | 198
|
12 |
QUALITY INSPECTION OF SINTERED TUNGSTEN-COBALT POWDER PRODUCTS BY MAGNETIC TECHNIQUE | Edward Gorkunov, Institute Of Engineering Science, Russia | 220
|
28 |
INFLUENCE OF THE STRUCTURAL RELAXATION ON THE INDENTATION BEHAVIOR OF THE SURFACE OF SILICA OPTICAL FIBER | Rochdi El Abdi, University of Rennes, France | 509
|
58 |
STRESS AND TEXTURE MEASUREMENT USING BARKHAUSEN NOISE AND ANGULAR SCANNING OF DRIVING MAGNETIC FIELD | Valeriy Vengrinovich, Institute of Applied Physics, Belarus | 225
|
59 |
NONDESTRUCTIVE EVALUATION OF SUPERALLOY SPECIMENS WITH A THERMAL BARRIER COATING | Jaap Heida, National Aerospace Laboratory NLR, Netherlands | 768
|
64 |
ULTRASONIC VELOCITY MEASUREMENTS IN ALUMINA-ZIRCONIA CERAMIC COMPOSITE SYSTEM | Hector Carreon, Instituto de Investigaciones Metalurgicas, Mexico | 314
|
68 |
ELECTROMAGNETIC-RESONANCE-ULTRASOUND MICROSCOPY (ERUM) FOR QUANTITATIVE EVALUATION OF LOCALIZED ELASTIC CONSTANTS OF SOLIDS | Hirotsugu Ogi, Osaka University, Japan | 322
|
71 |
COMPARISON OF OPTICAL COHERENCE TOMOGRAPHY AND X-RAY COMPUTED TOMOGRAPHY FOR CHARACTERISATION OF GLAS-FIBRE POLYMER MATRIX COMPOSITES | Johann Kastner, University Of Applied Sciences Upper Austria, Austria | 1278
|
82 |
NONDESTRUCTIVE EVALUATION AND CHARACTERIZATION OF MECHANICAL STRENGTH OF WOOD BASED PANELS USING FOUR DIFFERENT METHODS. | Rolando Coro González, Cidemco Research Centre, Spain |
|
101 |
CHANGE OF ULTRASONIC ATTENUATION AND MICROSTRUCTURE EVOLUTION DURING CREEP OF A STAINLESS STEEL | Toshihiro Ohtani, Ebara Research Co., Ltd., Japan | 260
|
103 |
DEVELOPMENT OF ULTRASONIC AND MICROWAVE TECHNIQUES FOR DETECTION OF DECAY IN WOODEN CROSS-ARMS | Kaida Khalid, Universiti Putra Malaysia, Malaysia | 367
|
105 |
DETERMINATION OF MODULUS OF ELASTICITY OF WOOD BASED PANELS, USING THREE DIRECTIONS ULTRASONIC WAVES AND CANTILEVER BEAM VIBRATIONS. | Rolando Coro González, Cidemco Research Centre, Spain |
|
106 |
RESONANCE ULTRASOUND SPECTROSCOPY FOR EVALUATING ELASTIC CONSTANTS AND INCOHESIVE BONDS OF THIN FILMS | Nobutomo Nakamura, Osaka University, Japan | 189
|
119 |
NONDESTRUCTIVE EVALUATION OF AIRCRAFT AND SPACECRAFT WIRING | Edward Tucholski, U. S. Naval Academy, United States | 605
|
120 |
THE IMPORTANCE OF IMAGING IN NONDESTRUCTIVE CHARACTERIZATION OF MATERIALS | Robert E. Green, Johns Hopkins University, United States | 201
|
138 |
INVESTIGATING THE MICROSTRUCTURE-ULTRASONIC PROPERTY RELATIONSHIPS IN STEELS | C. Hakan Gür, Foundation Techniques Ltd, China | 613
|
139 |
DETERMINING THE IMPACT TOUGHNESS OF AGE-HARDENED 2024 AL-ALLOY BY NONDESTRUCTIVE MEASUREMENTS | C. Hakan Gür, Middle East Technical Univ., Turkey | 461
|
162 |
NON-DESTRUCTIVE ESTIMATION OF MATERIAL STRENGTH BY PRECISE MEASUREMENT OF ULTRASOUND PROPAGATION RATE | Lev B. Zuev, Institute of Strength Physics and Materials Science, Russia |
|
198 |
A CORRELATION STUDY BETWEEN INTERGRANULAR STRAINS AND MAGNETIC PROPERTIES OF MILD STEEL | Roxana Hutanu, Queen's University, Canada | 294
|
214 |
SIMULATION OF IN-SITU CONCRETE CONDITIONS USING A NOVEL ULTRASONIC TECHNIQUE | Abdelmalek Bouhadjera, Univrsity Of Jijel, Algeria | 313
|
231 |
RESIDUAL STRESS ASSESSMENT IN SURFACE-TREATED NICKEL-BASE SUPERALLOYS | Peter Nagy, University of Cincinnati, United States | 278
|
262 |
MICRO CRACK CHARACTERIZATION OF METAL MATRIX COMPOSITES BY 3D-REFRACTION-COMPUTED-TOMOGRAPHY | Bernd Randolf Mueller, Federal Institute For Materials Research And Testing, Germany | 796
|
271 |
EPOXY - FLY ASH COMPOSITES --- A STUDY ON C-SCAN NON DESTRUCTIVE IMAGE PATTERNS, MICROSCOPY AND STRENGTH AS A FUNCTION OF ASH FILLER CONTENT | Anish Kumar, Indian Institute Of Science, India | 1866
|
304 |
USE OF TANGENTIAL RADIOGRAPHY AND RESONANCE ULTRASONIC TECHNIQUES TO EVALUATE BONDING QUALITY | Christophe Schwartz, Cea Centre de Valduc, France | 392
|
314 |
MAGNETIC IMAGING OF CHROMIUM DEPLETION IN THERMALLY SENSITIZED NI-CR-FE ALLOYS | Yasuhiro Kamada, Iwate University, Japan | 320
|
316 |
MAGNETIC EVALUATION OF THE EMBRITLLEMENT ON COLD-ROLLED STEELS | Yasuhiro Kamada, Iwate University, Japan | 201
|
329 |
THE STUDY ON ATTENUATION RULE OF X-RAY AND ? -RAY IN EXPLOSIVE | Chengying Shi; Northwestern Polytechnical University, Xi’an, Shanxi, P.R.China, Xi'an Reserch Inst.of Hi-tech., China | 157
|
340 |
DEFECT SIMULATIONS FOR INTERDENDRITIC STRESS COROSSION CRACKS IN ALLOY 182 WELDS | Per-Håkan Svahn, Sqc, Swedish Qualification Center, Sweden | 756
|
352 |
X-RAY REFRACTION TOPOGRAPHY CHARACTERIZES INTERNAL NANO INTERFACES | Bernd Randolf Mueller, Bam ( Fed. Inst. For Materials Res. & Testing), Germany |
|
358 |
ACOUSTIC EMISSION IDENTIFICATION OF FAILURE MECHANISMS IN FIBER REINFORCED PLASTIC MATERIALS BY NEURAL NETWORKS | Nat Ativitavas, Ptt Public Company Limited, Thailand | 451
|
363 |
NONLINEAR ULTRASONIC SPECTROSCOPY OF FIRED ROOF TILES | Karel Hajek C., Brno University Of Technology,, Czech Republic | 227
|
370 |
CHARACTERIZATION OF METAL FOAMS WITH SYNCHROTRON-TOMOGRAPHY AND 3D IMAGE ANALYSIS | Alexander Rack, Hahn - Meitner - Institut Berlin, Germany | 893
|
379 |
WAVELET ANALYSIS BASED ULTRASONIC NONDESTRUCTIVE TESTING OF POLYMER BONDED EXPLOSIVE | Wei Bin Zhang, Institute Of Chemical Materials, CAEP., China | 206
|
395 |
1-3 SINGLE CRYSTAL-POLYMER COMPOSITE TRANSDUCERS FOR BROADBAND ULTRASONIC NDT | Sandy Cochran, University Of Paisley, United Kingdom |
|
426 |
MODELLING OF ULTRASONIC BACKSCATTERING DUE TO GRAIN GROWTH IN A WELDED REGION | Håkan Wirdelius, Chalmers Lindholmen University College, Sweden | 3809
|
437 |
ULTRASONIC MATERIAL CHARACTERIZATION SYSTEM EMPLOYING AN ARRAY OF RECEIVING TRANSDUCERS | Serge Titov, Dept. Of Physics, University Of Windsor, Canada | 211
|
458 |
ADHESIVE CURE MONITORING WITH ACOUSTIC METHOD | Ina Severina, University of Windsor, Canada | 1144
|
471 |
INVERSION OF ULTRASONIC ATTENUATION FOR TEXTURAL INFORMATION OF POLYCRYSTALS | Salahuddin Ahmed, Pacific Northwest National Laboratory, United States | 277
|
495 |
EFFECT OF PRECIPITATION HARDENING BY AGING OF 8090 AL-LI ALLOY ON ULTRASONIC PARAMETERS | Venkatachalam Rajendran, Mepco Schlenk Engineering College, India |
|
504 |
A NONDESTRUCTIVE ELECTRICAL METHOD FOR EVALUATING MECHANICAL PROPERTIES OF AL- FOAM | Nahm Seung Hoon, Kongju National University, Korea, South | 483
|
505 |
SIMULATION OF THE ACOUSTIC EMISSION IMPULSE SHAPE VARIATION PROCESS IN METAL | Vladimir Kozharinov, Moscow State University, Russia | 106
|
528 |
QUANTITATIVE ANALYSIS OF SPATIAL PORE-PARTICLE-CORRELATIONS IN METALLIC FOAMS | Astrid Haibel, Hahn-Meitner-Institut, Germany | 689
|
550 |
CONCEPT OF ULTRASONICALLY-BASED MATERIALS CHARACTERIZATION IN NON-CHARACTERIZED ENVIRONMENT | Vjera Krstelj, Faculty Of Mechanical Engineering And Naval Architecture - University Of Zagreb, Croatia | 320
|
585 |
TECHNIQUES FOR HIGH RESOLUTION IMAGING OF WOOD STRUCTURE | Voichita Bucur, INRA - Centre de Nancy, France | 194
|
616 |
CHARACTERISATION OF EPOXY BASED MATERIALS USED IN THE DEVELOPMENT OF ULTRASOUND TRANSDUCERS | Jarlath Mc Hugh, Federal Institute For Material Research And Testing, Bam, Germany | 606
|
623 |
EXPERIMENTAL STUDY AND ANALYSIS OF THE STRUCTURAL NOISE OF THE ULTRASONIC SIGNAL. | Fairouz Bettayeb, Research Center on Welding and Control, Algeria | 712
|
642 |
DEVELOPMENT OF A NON-CONTACTING STRESS MEASUREMENT SYSTEM DURING TENSILE TESTING USING THE ELECTROMAGNETIC ACOUSTIC TRANSDUCER FOR A LAMB WAVE | Riichi Murayama, Fukuoka Institute Of Technology, Japan | 259
|
654 |
ULTRASONIC AND DIELECTRIC MONITORING OF THERMOSET CURE: SENSITIVITY TO PROCESS CONDITIONS. | Richard Challis |
|
678 |
SYNTHETIC FOCUSING FOR IMAGING THE ULTRASONIC BACKSCATTERED NOISE IN DUAL PHASE TITANIUM FORGED PIECES | Christophe Bescond, Cnrc/nrc - Institut Des Matériaux Industriels , Canada | 571
|
719 |
DETECTION OF CENTERLINE SIGMA PHASE IN AL-6XN PLATES VIA NONDESTRUCTIVE METHODS | Kirsten Lipetzky, Naval Surface Warfare Center Carderock Division, United States |
|
724 |
WASPALOY FATIGUE DAMAGE MONITORING USING SAW ACOUSTO-ELASTICITY | Brian O'Neill, University Of Windsor, Canada |
|
727 |
REAL-TIME SENSING OF METALLURGICAL TRANSFORMATIONS BY LASER-ULTRASOUND | Silvio Kruger, National Research Council - Canada, Canada | 228
|
766 |
NONLINEAR ELASTIC WAVE SPECTROSCOPY OF POLYMER SAMPLES WITH LASER INDUCED CRACKS | Zdenek Prevorovsky, Institute of Thermomechanics AS CR, Czech Republic |
|
768 |
STATISTICAL PROCESSING OF A VOLTAGE SIGNAL OF THE MAGNETIC BARKHAUSEN NOISE EMITTED BY QUENCHED AND TEMPERED SPECIMENS OF C45 STEEL | Janez Grum, Faculty of Mechanical Engineering, Slovenia | 465
|
770 |
Calibration of Various Sensor Units by Using Different Parameters of the Magnetic Barkhausen Noise | Janez Grum, Faculty of Mechanical Engineering, Slovenia | 390
|
784 |
HIGH RESOLUTION MICROTOMOGRAPHY AND FAST RADIOGRAPHY FOR REAL-TIME AND IN-SITU CHARACTERIZATION OF POROUS MICROSTRUCTURES | Tilo Baumbach, Fraunhofer Institute for Nondestructive Testing, Germany | 1399
|
801 |
NDT OF LOCAL ELASTIC ANISOTROPY AND DYNAMIC NONLINEARITY OF WOOD | Gerhard Busse, Institute for Polymer Testing and Polymer Science (IKP), Germany |
|
828 |
Lumber Stiffness Prediction Prior To Cant Sawing | Paul Harris | |