CD-Proceedings
17th World Conference on Nondestructive Testing

25-28 Oct 2008, Shanghai, China
START FOREWORD PAPERS AUTHORS SEARCH
910 AuthorsEmailPaper(s)Institution, Department Sort by InstitutionCityCountry Sort by Country
Aastroem, Thomasthomas.astrom@pohjola.fiFrom Fifteen to Two Hundred NDT-methods in Fifty Years
Pohjola Insurance Company Ltd.
HelsinkiFinland
Abbasi, Waheed A.waheed.abbasi@siemens.comRecent Advances in NDE Technologies for Turbines and Generators
Siemens Power Generation USA
PittsburghUSA
Abe, Kazuyukiabe@azmsys.co.jpAn Iterative Phase Difference Detection Method for High Sensitivity Eddy Current Sensor
Azuma Systems Corporation
KumagayaJapan
Adegbite, Michael Adedokunadegbiteam@gmail.comOpportunities and Challenges of Effective Inspection Industry in Nigerian Petroleum Sector
Petroleum Training Institute,
National Centre For NDT
Effurun, Delta StateNIGERIA
Afaghi Khatibi, Akbaraafaghi@ut.ac.irOn the Nondestructive Evaluation of Composite Structures by Liquid-Crystal Thermography
University of Tehran,
Faculty of Mechanical Engineering
TheranIran
Ahmadi, Mehdiahmadin@aut.ac.irPrediction of density in porous materials by x-ray techniques
Amir Kabir University of Tech (AUT)
TehranIran
Ahn, Yeon-Shikysas@kepri.re.krResearch for Field Application of Heat Exchanger Facilities using Guided Wave
Korea Electric Power Research Institute,
Non-Destructive Evaluation Center
DaejeonKorea
Aknin, Patriceaknin@inrets.frDetection of Internal Rail Defects Based on the Smoothed Randon Transform in the Presence of Ultrasonic Grain Noise
French National Institute for Transport and Safety Research
ArcueilFrance
Alberteris Campos, Manuelalberteris@yahoo.comComparison Between Creep Failure Analysis and Magnetic Barkahusen Noise Results
Universidade de S.Paulo (USP),
Laboratório de Dinâmica
Sao PauloBrazil
Alekhin, Sergey G.spektr@co.ruApplication of Phased Arrays in Combination with Virtual Dynamic Focusing for Ultrasonic Tomographic Imaging of Metals
Acoustic Control Systems Ltd.
MoscowRussia
Alghem, Abdeldjalila.alghem@hotmail.frNDT as a tool, for Post-Irradiation Examination
Nuclear research center of Birine/COMENA
DjelfaAlgeria
Allweins, KaiHigh Resolution Eddy current testing of superconducting wires using GMR sensors
University of Giessen,
Institute of Applied Physics
GiessenGermany
Amabili, MarcoHealth status of ancient buildings: interferometric radar NDT inspection
University of Parma,
Department of Industrial Engineering
ParmaItaly
Angelo, Jonhson Deliberojonhson@webcable.com.brComparison Between Creep Failure Analysis and Magnetic Barkahusen Noise Results
Desenvolvimento e Consultoria Ltda.,
Pesquisa
Sao PauloBrazil
Ara, Katsuyukikara@iwate-u.ac.jpFeasibility Study of Magnetic NDE by Impedance Measurement using Single-yoke
Iwate University,
Faculty of Engineering, NDE & Science Research Center
MoriokaJapan
Armitt, Timtim@lavender-ndt.comTOFD Inspection with Phased Arrays
Lavender International NDT Consultancy Services Ltd
SheffieldUnited Kingdom
Artemiev, Boris V.spektr@co.ruX-Ray Thickness Gauges of the RIT10 Family for Thickness Measurement at Line Production of Rolled Metal
SPEKTR-GROUP Association
MoscowRussia
Baan, Janjan.baan@tno.nlImage processing techniques for ultrasonic inspection
TNO Science & Industry
DelftNetherlands
Babu, Sajeesh Kumarskbabu@vsl-sg.comCase Studies on Uncertainties of Ultrasonic Weld Testing Interpretation
VSL Singapore Pte Ltd
SingaporeSingapore
Badalyan, Vladimir G.bvg@echoplus.ruUltrasonic Testing of Austenitic Welds at the Russian NPP
Scientific and Production Center, SPC ECHO+
MoscowRussia
Bai, LuThe NDT Study of Metal Composite Material Tube
Nanchang Hang Kong University,
Key Laboratory of Nondestructive Testing, Ministry of Education
NanchangChina
Bai, WeiminThermographic Evaluation of Aircraft Composite Materials
Nanyang Technological Univ.
SingaporeSingapore
Baik, Sung-Hoonshbaik@kaeri.re.krDetection of a Surface-Breaking Crack Depth by Using the Surface Waves of Multiple Laser Beams
Korea Atomic Energy Research Institute (KAERI)
DaejeonKorea
Balogun, Oluwaseyis-krishnaswamy@northwestern.eduFiber Bragg Gratings and Two Wave Mixing Spectral Demodulator System for Impact Detection and Localization
Northwestern University
Evanston, ILUSA
Bateni, Aliarazbateni@gmail.comPrediction of density in porous materials by x-ray techniques
Amir Kabir University of Tech (AUT)
TehranIran
Batov, Gerogy P.kachestvo@umail.ruNDT Personnel Certification in Accordance with European and International Standards
STC, Kachestvo, LTD
MoscowRussia
Bauer, WalterWalter.Bauer@de.bosch.comX-Ray Net Weight Control of Pharmaceutical Products
Robert Bosch GmbH - Corporate Research,
Department for Integrated Component Design
Stuttgart Germany
Bavendiek, KlausKlaus.Bavendiek@hbg.yxlon.comStrategies for Film Replacement in Radiography - Films and Digital Detectors in Comparison -
YXLON International X-Ray GmbH
HamburgGermany
Bazulin, Andrey E.android@echoplus.ru,Ultrasonic Transducers Calibration System with 3D Processing AUGUR 5.4
Scientific and Production Center, SPC ECHO+
MoscowRussia
Bazulin, Evgenybazulin@echoplus.ruUltrasonic Transducers Calibration System with 3D Processing AUGUR 5.4
Scientific and Production Center, SPC ECHO+
MoscowRussia
Beckmann, Jörgjoerg.beckmann@bam.deImproved Procedure for Computed Radiography - a Comparative Study on Welded Tube Sections by Film Radiography and Computed Radiography
Federal Institute for Materials Research and Testing (BAM)
BerlinGermany
Belattar, Sougratibelattars@hotmail.comFinite Element Method Applied to Thermal Nondestructive Characterization of Delamination in the Dam Structure
Chouaib Doukkali University,
Faculty of Sciences, Laboratory of Electronics, Instrumentation and processing of the signal
El JadidaMorocco
Bellon, CarstenCarsten.Bellon@bam.deFlaw Size Dependent Contrast Reduction and Additional Unsharpness by Scattered Radiation in Radiography - Film and Digital Detectors in Comparison- aRTist - Analytical RT Inspection Simulation Tool for Industrial Application
Federal Institute for Materials Research and Testing (BAM)
BerlinGermany
Benaddad, RabahNDT as a tool, for Post-Irradiation Examination
Nuclear research center of Birine/COMENA
DjelfaAlgeria
Benbartaoui, H.fairouz_bettayeb@email.comThe reliability of the ultrasonic characterization of welds by the artificial neural network
University of Science and Technology (USTHB)
AlgiersAlgeria
Bensitel, Abdessalambensitel@cnesten.org.maISO 17020 Accreditation of CNETSTEN NDT Laboratory Part 1
CNESTEN,
NDT laboratory
RabatMorocco
Berg, Hans Wolfganghans.berg@bmb-heilbronn.deNo UV radiation in magnetic-powder inspection
BMB Gesellschaft für Materialprüfung mbH
HeilbronnGermany
Berke, Michaelmichael.berke@ge.comPractical Experiences in Manual Ultrasonic Phased Array Inspection
GE Inspection Technologies
HürthGermany
Bernau, HendrikHigh Resolution Eddy current testing of superconducting wires using GMR sensors
University of Giessen,
Institute of Applied Physics
GiessenGermany
Bessler, FlorianFlorian.Bessler@de.bosch.comX-Ray Net Weight Control of Pharmaceutical Products
Robert Bosch GmbH - Corporate Research,
Department for Integrated Component Design
Stuttgart Germany
Bettayeb, Fairouzfairouz_bettayeb@email.comThe reliability of the ultrasonic characterization of welds by the artificial neural network Improving the material ultrasonic characterization and the signal noise ratio by the wavelet packet The multiresolution analysis for ultrasonic non destructive evaluation
Research center on welding and control,
CSC
AlgiersAlgeria
Bieder, PeterCurrent NDT Research & Development for NPP Inspections
QNET East Asia
ShanghaiChina
Biryukova, Nadezhda P.kachestvo@umail.ru,spektr@co.ruNDT Personnel Certification in Accordance with European and International Standards
STC, Kachestvo, LTD
MoscowRussia
Bishko, Alexander V.abishko@acsys.ruUltrasonic Echo-Pulse Tomography of Concrete Using Shear Waves Low-Frequency Phased Antenna Arrays
Acoustic Control Systems Ltd.
MoscowRussia
Bisiaux, Bernardbernard.bisiaux@vallourec.frEncircling ET Inspection on Corrugated Tubes Destined to Gas Tubes for EGR Heat Exchanger Simulation of Digital Filtering to Optimize Pipe Ultrasound Wall Thickness Measurement On Line Analysis and Interpretation of Ultrasonic Images to Improve the Selectivity of the Control Installations for Steel Pipes Recognition and Improvement in the Classification of Imperfections Detected by Eddy Current Inspection
CEV – V&M France – Vallourec Group
Aulnoye-AymeriesFrance
Blackshire, JamesInteraction of Rayleigh Waves Induced by Interdigital Transducer with Fatigue Crack
US Air Force Research Lab
Dayton, OHUSA
Bloom, Joostjoost.bloom@tno.nlPOD Generator, Development of numerical modeling tools for quantitative assessment of the performance of  non-destructive inspection techniques Permanent corrosion monitoring using guided waves UMASIS, an analysis and visualization tool for developing and optimizing ultrasonic inspection techniques Minimization of internal reverberation in acoustic windows used in US inspection systems by numerical simulation
TNO Science & Industry
DelftNetherlands
Bobrov, Vladimir T. spektr@co.ruElectromagnetic-Acoustic Transducers for in-Service Manual Testing of Heated Objects
JSC, SPECTRUM-RII
MoscowRussia
Boehm, RainerRainer.Boehm@bam.deQuantitative Defect Sizing on Components with Different Wall Thicknesses Using UT-SAFT
Federal Institute for Materials Research and Testing (BAM)
BerlinGermany
Boulavinov, AndreySampling phased array, a new technique for ultrasonic signal processing and imaging now available to industry
Fraunhofer-Institute for Non-Destructive Testing, IZFP
SaarbrückenGermany
Bovtun, Victorvictor.bovtun@bam.deCellular polypropylene Ferroelectret Film: Piezoelectric Material for non-contact Ultrasonic Transducers
Federal Institute for Materials Research and Testing (BAM)
BerlinGermany
Braconnier, Dominiquedbraconnier@indes-ndt.comInspection of thick part with Phased Array Volume Focusing Thick Part Inspection using Volume Focusing Technique and Large Aperture Phased Array A Breakthrough in Sputtering Target Inspections: Ultra-High Speed Phased Array Scanning with Volume Focusing 2D arrays and Volume Focusing combined inspection technique
KJTD Co. Ltd.
OsakaJapan
Brekow, GerhardGerhard.Brekow@bam.deQuantitative Defect Sizing on Components with Different Wall Thicknesses Using UT-SAFT
Federal Institute for Materials Research and Testing (BAM)
BerlinGermany
Breon, Lukeljb196@psu.eduGuided Wave Thickness Measurement Tomography for Structural Health Monitoring in Critical Zones of Pipelines
Pennsylvania State University
University Park, PAUSA
Brillon, Charlescharles.brillon@olympusndt.comTOFD Inspection with Phased Arrays
Olympus NDT
Waltham, MAUSA
Britvin, Vladimirtech@nordinkraft.comIndustrial Ultrasonic Examination of plates with EMAT
Nordinkraft Company
CherepovetsRussia
Buechler, Johannesjohannes.buechler@ge.comPractical Experiences in Manual Ultrasonic Phased Array Inspection
GE Inspection Technologies
HürthGermany
Bulatov, AlexanderOptimization of structure and operation algorithms for electromagnetic plated coatings thickness meters with the use of digital technologies
Constanta ltd
St-PetersburgRussia
Bulavinov, Andreyandrey.bulavinov@izfp.fraunhofer.deImproving the Inspectability of Stainless Steel and Dissimilar Metal Welded Joints Using Inverse Phase-Matching of Phased Array Time-Domain Signals
Fraunhofer-Institute for Non-Destructive Testing, IZFP
SaarbrückenGermany
Bureau, Jean-Francoisjeanfrancois.bureau@ge.comAdvances in Eddy Current Array Sensor Technology
GE Inspection Technologies
Lewistown, PAUSA
Busko, Valeriybusko@iaph.bas-net.byInvestigation of friction and abrasive effects in engineering steels with micromagnetic measurements
National Academy of Sciences of Belarus,
Institute of Applied Physics (IAPH)
MinskBelarus
Bücherl, Thomasbuc@rad.chemie.tu-muenchen.deRadiographic and Tomographic Inspection of Wooden Specimens with Fission Neutrons
Technische Universität München,
Institut für Radiochemie
GarchingGermany
Bydanov, Denisdvbydanov@mail.ruSimulator for Education of Eddy Current Testing Specialists
Moscow state university of instrument making and informatic
MoscowRussia
Bykov, Vladimir V.market@nio7spectr.ruProblems of image restoration in metallography
JSC, SPECTRUM-RII
MoscowRussia
Cai, Yufangaacai@163.comSegmentation of Casting Defects in X-Ray Images Based on Fractal Dimension
Chongqing University,
Key Laboratory of Optoelectronic Technology and System of Ministry Education of China, ICT Research Center
ChongqingChina
Cai, Zhen-Xiongczxw@vip.sina.com3D Finite Element Analysis of Marine Steel Plate Magnetic Leakage Testing Help Software Design of NDT Instrument Based on FLASH Cartoon Eddy Current Non-Destructive Testing Application Research of Marine Engines
Jimei University,
Marine Engineering Institute
XiamenChina
Camerini, Claudio Soligoclaudio@petrobras.com.brGamma Ray System Operated by Divers for Underwater Inspection
Petrobras S.A,
Research Center, CENPES
Rio de JaneiroBrazil
Cao, Zhihuasisp@sisp.cnAcoustic Emission Testing of the Shell of Electromagnetic Valve
Shanghai Institute of Space Power -sources
ShanghaiChina
Carboni, Michelemichele.carboni@polimi.itAn analysis of UT echoes coming from fatigue cracks and artificial defects on railway axles Performance of UT creeping waves in crack sizing
Politecnico di Milano,
Department of Mechanical Engineering
MilanoItaly
Carlos, Mark F.mfcarlos@pacndt.comLoose Parts and Valve Flow Monitoring in Nuclear Power Plants Using Integrated Digital Systems
Physical Acoustics Corporation (PAC)
Princeton Junction, NJUSA
Castaings, M.m.castaings@lmp.u-bordeaux1.frPropagation of torsional waves in a waveguide of arbitrary cross section immersed in a fluid
Université Bordeaux,
Laboratoire de Mécanique Physique
TalenceFrance
Casula, Olivierolivier.casula@cea.frRecent Developments of Multi-elements Eddy Currents Probes
Commissariat Energie Atomique (CEA),
LIST
Gif-Sur-YvetteFrance
and: Inspection of Complex Geometries Using Flexible Phased-Array Transducers
Commissariat Energie Atomique (CEA),
LIST
SaclayFrance
Cawley, Peterp.cawley@imperial.ac.ukThe Reliable Implementation of Thermosonics NDT Ultrasonic crack monitoring using SH waves in extreme and inaccessible environments Long Range Guided Wave Pipe Inspection - the Advantages of Focusing
Imperial College ,
UK Research Centre in Non-destructive Evaluation (RCNDE), Department of Mechanical Engineering
LondonUnited Kingdom
Ceglar, Fredericf.cegla@imperial.ac.ukUltrasonic crack monitoring using SH waves in extreme and inaccessible environments
Imperial College ,
UK Research Centre in Non-destructive Evaluation (RCNDE), Department of Mechanical Engineering
LondonUnited Kingdom
Certo, MarioSizing in Phased Array Technique using Diffraction and Amplitude Displacement
I&T Nardoni Institute
BresciaItaly
Chai, Juin-Fuchai@ncree.org.twIdentification of Source Time Function for Train-induced Vibration of Underground Tunnels
National Center for Research on Earthquake Engineering (NCREE)
TaipeiTaiwan, China
Chai, Tai ChongCT Reconstruction with Good-Orientation and Layer Separation for Multilayer Objects
Institute of Microelectronics
SingaporeSingapore
Chan, KenUltrasonic Inspection of Steam Generators at CANDU Power Plants
Kinectrics Inc.
TorontoCanada
Chan, Septimonette Septimonette.Chan@twi.co.ukModelling of guided ultrasonic wave in aircraft wiring
TWI Ltd
CambridgeUnited Kingdom
Chan, Shiuschan@msu.eduElectromagnetic health monitoring of BSCC prosthetic heart valves
Michigan State University,
College of Engineering
East Lansing, MIUSA
Chang, Ho-SupDetermination of Elastic modulus of thin materials by Speckle Interferometry
Chosun University,
Laser Application Research Centre
GwangjuKorea
Chang, Junjiejunjiechang@hotmail.comStudy on Characteristic of Thin Layer Rubber Based on Ultrasonic Echo Testing Evaluation of the Fiberglass-Reinforced Plastics Interfacial Behavior by using Ultrasonic Wave Propagation Method
Dalian Maritime University,
Electromechanics and Material Engineering College
DalianChina
Chang, Xiaominglab@xiaoming-lab.comThe Study the Preferred Magnetization Direction of Long Line Magnetostrictive Position Sensor
TaiYuan University of Technology,
College of Computer and Software
TaiyuanChina
Chen, Andyandy.chen@kinectrics.comUltrasonic Inspection of Steam Generators at CANDU Power Plants
Kinectrics Inc.
TorontoCanada
Chen, Bing-Yabingbing974914@sina.comApplication of Measurement System R&R Analysis in Ultrasonic Testing
Nanchang Hang Kong University,
Department of Testing and Control Engineering
NanchangChina
Chen, Chendiego1101@163.comExperimental Research on the Microcosmic Mechanism of Stress-magnetic Effect for Magnetic Memory Testing
Nanchang Hang Kong University,
Key Laboratory of Nondestructive Testing, Ministry of Education
NanchangChina
Chen, Dapengpp.2002@163.comUltrasonic Infrared Thermal Wave Technology and its Applications in Nondestructive Evaluation
Capital Normal University,
Department of Physics
BeijingChina
Chen, Guangchengang@csei.org.cnStudy on Magnetic Memory Method (MMM) for Fatigue Evaluation A method of Ray digital imaging automatic Inspection on Tube to tube sheet welded joints Based on VC + + Optimization Research on Weld Image Based on Computed Radiography System A Method of weld Edge Extraction in the X-ray Linear Diode Arrays Real-time imaging Digital Radiographic Imaging Inspection System on the Tube to Tube sheet Welding Joints of Heat Exchanger
China Special Equipment Inspection and Research Institute
BeijingChina
Chen, Houguihougui_ch@163.comThe difference among three reference standards used in the performance evaluation of wire rope EMT instrument
Wuhan University,
School of Electrical Engineering
WuhanChina
Chen, Huai-dongchenhuaidong@cgnpc.com.cnApplication of Ultrasonic Simulation Technology in Technical Justification of in-Service Inspection of Nuclear Power Plant The Developments of Simulation Software for Ultrasonic Testing
Suzhou Nuclear Power Institute
SuzhouChina
Chen, Huineng213chenhuineng@sohu.comStudy on the density characterization of the CT image
The 213th Research Institute of China Ordnance Industry
Xi'anChina
Chen, JuanTesting Instrument for Internal Stress of Long Seamless Rails
Beijing University of Chemical Technology
BeijingChina
Chen, Lichenli6218456@sina.com.cnRelated Problems in Ultrasonic Detection of Porcelain Insulator
Anhui Electric Power Research Institute
Hefei AnhuiChina
Chen, Maolongdlts_chenml@petrochina.com.cnA Study of Inspecting the Stress on Downhole Metal Casing in Oilfields with Magnetic Memory Method
Daqing Logging & Testing Services Company
DaqingChina
Chen, Rongminchenrongmin@gmail.comStudy on the Method of Detection of the Marks of Ferromagnetic Material Based on the Array of Hall Element
Tsinghua University,
School of aerospace
BeijingChina
Chen, Xingcxwind@gmail.comProgress in Nondestructive Evaluation of Stress Concentration with MMM Method
Tsinghua University,
Department of mechanical engineering
BeijingChina
Chen, Yi-Fangchenyifang@mail.tsinghua.edu.cnUltrasonic Feature Imaging System for Testing Bimetal Rotor Clad Layer Simulation of Scattering Acoustic Field in Rod and Identify of Ultrasonic Flaw Detecting Signal Mechanical Property Analysis with Ultrasonic Phased Array Phase Reversed Image Reconstruction Method of Industrial Ultrasonic CT
Tsinghua University,
Department of Mechanical Engineering
BeijingChina
Chen, Yiweisisp@sisp.cnAcoustic Emission Testing of the Shell of Electromagnetic Valve
Shanghai Institute of Space Power -sources
ShanghaiChina
Chen, Yong-Xiangcyxcyx1973@yahoo.com.cnThe Utrasonic Detection of the Large Welded Gear
Chongqing gearbox limited liability corporation
ChongqingChina
Chen, Yuan chenyuan1030@126.comApplication of Wavelet Analysis to Signal De-noising in Ultrasonic Testing of Welding Flaws
Xi'an University of Science and Technology,
School of Mechanical Engineering
Xi'anChina
Chen, Yubaochenyubao@tsinghua.org.cnThe Application of TOFD Technique on the Large Pressure Vessel Development of Ultrasonic Transducer Testing Austenitic Stainless Steel Weld
Guangdong Special Equipment Inspection Institute
GuangzhouChina
Chen, ZhenLuThe Fluorescene Penetrant Agent Manufacture and Its Wastewater Treatment
Xiamen Chemical Industry Machinary Plant
XiamenChina
Chen, Zhenmaochenzm@mail.xjtu.edu.cnNDT of Lattice Sandwich Metal Plate by Using DC Potential Drop Method
Xi'an Jiaotong University,
MOE Key Laboratory for Strength and Vibration
Xi'anChina
Cheng, Chia-Chi cccheng@mail.cyut.edu.twEvaluation of Depth of Deterioration of Concrete Structure after Fire Using Stress Wave Method
Choayang University of Technology,
Department of Construction Engineering
AberdeenTaiwan, China
Cheong, Yong-Mooymcheong@kaeri.re.krDetection of a Surface-Breaking Crack Depth by Using the Surface Waves of Multiple Laser Beams
Korea Atomic Energy Research Institute (KAERI)
DaejeonKorea
Chertov, Andriy M.chertov@uwindsor.caComparison between in - line ultrasonic monitoring of the spot weld quality and conventional NDT methods applied in a real production environment
University of Windsor
Windsor, OntarioCanada
Chi, DazhaoUltrasonic TOFD Testing Model for Crack Measurement in Thick Wall Weldment
Harbin Institute of Technology
HarbinChina
Chiang, Chih-Hungchiangc@mail.cyut.edu.twThe Numerical Investigation into the Influence of the Scattering Effect from the Aggregates of Concrete on the Transient-elastic-wave-based NDT Technologies Thermographic inspection of bond quality of FRP strengthed concrete
Chao Yang University of Technology,
Department of Construction Engineering
Wufeng, TaichungTaiwan, China
Chiu, Chin-Lung 963402006@cc.ncu.edu.twA Modified Synthetic Aperture Focusing Technique (SAFT) by the Hilbert-Huang Transform (HHT)
National Central University,
Department of Civil Engineering
ChungliTaiwan, China
Cho, Younho mechcyh@pusan.ac.krRecent Advances on Guided Waves in Pipe Inspection Ultrasonic Tomography of Guided Wave
Pusan National University,
Graduate School, School of Mechanical Engineering
PUSANKorea
Choi, Ik-Hwangssamssoyng@hanyang.ac.krExperimental system dependent factors in the measurement of ultrasonic nonlinear parameter by using contact PZT transducer
Graduate School of Hanyang University,
Automotive Engineering
SeoulKorea
Choi, Man-Yongmychoi@kriss.re.krFatigue Crack Detection by Ultrasound Infrared Thermography
Korea Research Institute of Standards and Science,
Safety Metrology Group
DaejeonKorea
Chougrani, Khalidkhalid.chougrani@applusrtd.comIWEX: a new ultrasonic array technology for direct imaging of subsurface defects
Applus RTD ,
NDTI Technological Center
RotterdamNetherlands
Chuang, Wei-Liangchiangc@cyut.edu.twThe Numerical Investigation into the Influence of the Scattering Effect from the Aggregates of Concrete on the Transient-elastic-wave-based NDT Technologies
Chao Yang University of Technology,
Department of Construction Engineering
Wufeng, TaichungTaiwan, China
Chui, Kui ming-chui@iet.org.ukA De-Convolution Technique used for NDT in X-ray & CT.
Image Enhancement Technology Ltd
UxbridgeUnited Kingdom
Chung, Cheng-Hsienbrian7386@yahoo.com.twNondestructive Determination of Elastic Constants of Thin Plates Based on PVDF Focusing Ultrasound Transducers and Lamb Wave Measurements
National Cheng Kung Univesity,
Department of Mechanical Engeering
TainanTaiwan, China
Clendening, Suesue.clendening@ge.comThe Value of DICONDE
GE Inspection Technologies
Lewistown, PAUSA
Clossen, MichaelMichael.Clossen@siemens.comAdvanced NDE inspection methods for detection of SCC in blade attachments and blade roots
Siemens Power Generation
MülheimGermany
Collini, Lucaluca.collini@unipr.itHealth status of ancient buildings: interferometric radar NDT inspection
University of Parma,
Department of Industrial Engineering
ParmaItaly
Collrep, Joergjoerg.collrep@dantecdynamics.comDetection capabilities of state-of-the-art Shearography systems
Dantec-Ettemeyer
UlmGermany
Coperet, Philippephilippe.coperet@socomate.frE-ROTA Process and System for Dimensional Characterization of Tubes FAAST-FAST AUTOMATED ANGLE SCAN TECHNIQUE
Socomate International
Crécy la ChapelleFrance
Costain, Jamesjames.costain@ge.comDigital Comparisons in Oil & Gas
GE Inspection Technologies
Lewistown, PAUSA
Cuffe, Johnjohn.cuffe@ge.comEddy Current Measurement of Case Hardened Depth of Steel Components
GE Inspection Technologies
Lewistown, PAUSA
Dai, Guanggdai126@126.comApplication of Acoustic Emission detection Technology on multilayer binding High Pressure Vessel Feature extraction of acoustic emission signals from low carbon steel pitting Based on Independent component analysis and wavelet transforming
Daqing Petroleum Institute,
Mechanical Science and Engineering College
DaqingChina
Dai, JingminAn IR Lock-in Thermography Nondestructive Test System Based on the Image Sequence Processing
Harbin Institute of Technology,
School of Electronic Engineering and Automation
HarbinChina
Danso, Kwaku Aboagyekabdanso@yahoo.comThe Role of IAEA/AFRA on the Promotion of NDT in Africa
Ghana Atomic Energy Commission,
National Nuclear Research Institute
AccraGHANA
Davies, Jacobjacob.davies@imperial.ac.ukLong Range Guided Wave Pipe Inspection - the Advantages of Focusing
Imperial College ,
UK Research Centre in Non-destructive Evaluation (RCNDE), Department of Mechanical Engineering
LondonUnited Kingdom
Davut, Kemalkdavut@metu.edu.trNon-destructive Characterization of Pearlite Spheroidisation by Magnetic Barkhausen Noise Method
Middle East Technical University (METU),
Welding Technology and NDT Research/Application Center
AnkaraTurkey
De Odorico, W.walter.deodorico@ge.comAutomated Inspection of Complex Composite Components in the Production Cycle
GE Inspection Technologies
AlzenauGermany
Decitre, Jean-Marcjean-marc.decitre@cea.frRecent Developments of Multi-elements Eddy Currents Probes
Commissariat Energie Atomique (CEA),
LIST
Gif-Sur-YvetteFrance
Degischer, Hans-Peterhpdegi@pop.tuwien.ac.atOn the Detection of Inhomogeneities in Steel by Computed Tomography
Vienna University of Technolog,
Institute of Materials Science and Technology
ViennaAustria
Delenkovsky, Nikolai V.The ways of penetrant testing applicability for rough surfaces
National Academy of Sciences of Belarus,
Institute of Applied Physics (IAPH)
MinskBelarus
Demma, Alessandroalex@guided-ultrasonics.comUltrasonic Guided Waves - Evaluation of Trials for Pipeline Inspection
Guided Ultrasonics Limited
LondonUnited Kingdom
Deutsch, Wolfram A. Karlw.deutsch@karldeutsch.deAutomated Ultrasonic Pipe Weld Inspection
Karl Deutsch Pruef- und Messgeraetebau
WuppertalGermany
Dey, Anikaanika.dey@bam.deThe Important Role of Eddy Current Testing in Railway Track Maintenance
Federal Institute for Materials Research and Testing (BAM)
BerlinGermany
Didin, Gennady362@mail.ruAdaptive Eddy Current Flaw Detectors
Moscow state university of instrument making and informatic
MoscowRussia
Diederichs, Rolfrd@ndt.netAdvanced Publishing in NDT
NDT.net
KirchwaldGermany
Dijkstra, F. H.f.h.dijkstra@rtd.nlUMASIS, an analysis and visualization tool for developing and optimizing ultrasonic inspection techniques
Applus RTD
RotterdamNetherlands
Ding, KejianIndustrial Ray DR/ ICT integration inspection testing system (2) Software and Testing
Beijing Jiaotong University,
School of Science
BeijingChina
Ding, Keqinkqding@sina.comIndustrial Ray DR/ ICT integration inspection testing system (2) Software and Testing A method of Ray digital imaging automatic Inspection on Tube to tube sheet welded joints Based on VC + + Optimization Research on Weld Image Based on Computed Radiography System A Method of weld Edge Extraction in the X-ray Linear Diode Arrays Real-time imaging Industrial ray DR/ICT integrated inspection testing system (1)  Hardware system Digital Radiographic Imaging Inspection System on the Tube to Tube sheet Welding Joints of Heat Exchanger
China Special Equipment Inspection and Research Institute
BeijingChina
Ding, QiResearch on and Development of Steam Pipeline Creep Real-time Monitoring System Based on Virtual Instrument Technology
Xi'an University of Science and Technology,
Computer Science and Engineering College
Xi'anChina
Ding, ShoubaoNumerical Simulation and Experiment on Magnetic Flux Leakage Inspection of Cracks in Steels Magnetic Flux Leakage and Acoustic Emission Testing Technique for Atmospheric Storage tanks Acoustic Emission in-service detection of cryogenic storage tank floors
Zhejiang Provincial Special Equipment Inspection and Research Institute
HangzhouChina
Ding, Xiaojunding1228@126.comMagnetic Memory Inspection of High Pressure Manifolds
Xinjiang Petroleum Administration Down-hole Services Company
KelamayiChina
Dixon, Steves.m.dixon@warwick.ac.ukElectromagnetic Acoustic Transducers for in and out of plane Ultrasonic Wave Detection
University of Warwick,
Department of Physics
CoventryUnited Kingdom
Djeddi, Mounirdjeddi@inrets.frDetection of Internal Rail Defects Based on the Smoothed Randon Transform in the Presence of Ultrasonic Grain Noise
French National Institute for Transport and Safety Research
ArcueilFrance
Dmitrovich , Dmitrybrjanzew@iaph.bas-net.byBi-axial stress quantitative evaluation with Barkhausen noise: the past and perspectives
National Academy of Sciences of Belarus,
Institute of Applied Physics (IAPH)
MinskBelarus
Dobmann, Gerdgerd.dobmann@izfp.fraunhofer.deCurrent NDT Research & Development for NPP Inspections Potential new approaches to ultrasonic quantitative NDE (QNDE) by combining high speed defect reconstruction procedures based on sampling phased array techniques with probabilistic failure assessment
Fraunhofer-Institute for Non-Destructive Testing, IZFP
SaarbrückenGermany
Dong, Shi-yunsyd422@sohu.comA Novel NDT Method for Measuring Thickness of Brush-Electroplated Nickel Coating on Ferrous Metal Sueface Influence of Stress Concentration Factor on Magnetic Memory Effect of Steel Samples under Dynamic Tension Load
Academy of Armored Forces Engineering,
National Key Laboratory for Remanufacturing
BeijingChina
Döring, Joachimjoachim.doering@bam.deCellular polypropylene Ferroelectret Film: Piezoelectric Material for non-contact Ultrasonic Transducers
Federal Institute for Materials Research and Testing (BAM)
BerlinGermany
Dragan, Krzysztofkrzysztof.dragan@itwl.plHolistic Approach for Structural Integrity Evaluation of Composite Main Rotor Blades
Air Force Institute of Technology,
Safety And Reliability Division
WarsawPoland
Drinkwater, Bruce W.b.drinkwater@bristol.ac.ukDetectability of kissing bonds using the non-linear high frequency transmission technique Contact defect detection in plates using guided wave and vibro-acoustic modulation Characterization of small defects using ultrasonic arrays: a scattering coefficient matrix approach
University of Bristol,
Department of Mechanical Engineering, NDT Laboratory
BristolUnited Kingdom
Du , Dongdudong@tsinghua.edu.cnReal-time X-ray Image Processing Based on Information Fusion for Weld Defects Detection Segmentation of Weld Defects in X-ray Image Based on Partial Surface Reconstruction
Tsinghua University,
Department of Mechanical Engineering
BeijingChina
Duan, Yuxiaduanyuxia1981@163.comInfrared Thermal Wave Nondestructive Testing for Cf /SiC Ceramic Matrix Composite
Beijing University of Aeronautics and Astronautics
BeijingChina
Dubois, Philippephilippe.dubois@cea.frAdvanced Matrix Phased Array Settings for Inspection
Commissariat Energie Atomique (CEA)
Gif-Sur-YvetteFrance
Dubov, Anatoly A.mail@energodiagnostika.ruQuality assessment of welded joints  by the metal magnetic memory method compared to conventional NDT methods and means for materials' properties assessment Estimation of gas and oil pipelines condition based on the method of metal magnetic memory. Technical Diagnostics of Equipment and Constructions with Residual Life Assessment Using the Method of Metal Magnetic Memory New Standards ISO 24497 on the Metal Magnetic Memory Method. the Program of Personnel Training and Certification. Stress Testing is a New NDT Type in the Russian Standard GOST R 52330-2005 and International Standard ISO-9712
Energodiagnostika Co. Ltd.
ReutovRussia
Dupuis, Oliverolivier.dupuis@olympusndt.comTOFD Inspection with Phased Arrays
Olympus NDT
Waltham, MAUSA
Ebrahimi, Ghanbarba_ebrahimi@yahoo.comComparing Sound Absorption Characteristic of Acoustic boards made of Aspen Particles and Different Percentage of Wheat and Barely Straws
Tehran University,
Wood and Paper Industry Faculty of Natural Resources
KarajIran
Efimov, Alexey G.spektr@co.ruComputerized Portable Eddy-Current Flaw Detectors Low Frequency Acoustic (Impedance) Flaw Detectors of the New Generation and Their Application
JSC, SPECTRUM-RII
MoscowRussia
Elballouti, Abdessamadelballouti@hotmail.comFinite Element Method Applied to Thermal Nondestructive Characterization of Delamination in the Dam Structure
Chouaib Doukkali University,
Faculty of Sciences, Laboratory of Electronics, Instrumentation and processing of the signal
El JadidaMorocco
Erdogan, Mehmetmehmeter@gazi.edu.trInvestigating the Austempering Parameters of Ductile Iron by Magnetic Barkhausen Noise Technique The Evaluation of Structure-Property Relationships in the Dual Matrix Ductile Iron by Magnetic Barkhausen Noise Analysis
Gazi University,
Technical Education Faculty, Dept. of Metallurgy Education
AnkaraTurkey
Erhimona, Okiemute Graceokierhimona@yahoo.comOpportunities and Challenges of Effective Inspection Industry in Nigerian Petroleum Sector
Petroleum Training Institute,
National Centre For NDT
Effurun, Delta StateNIGERIA
Ewert, Uweuwe.ewert@bam.deImproved Procedure for Computed Radiography - a Comparative Study on Welded Tube Sections by Film Radiography and Computed Radiography Strategies for Film Replacement in Radiography - Films and Digital Detectors in Comparison - Flaw Size Dependent Contrast Reduction and Additional Unsharpness by Scattered Radiation in Radiography - Film and Digital Detectors in Comparison- aRTist - Analytical RT Inspection Simulation Tool for Industrial Application
Federal Institute for Materials Research and Testing (BAM)
BerlinGermany
Falter, Stephanstephan.falter@ge.comRipple and Uniformity Measurement of a Phased-Array Testing-Machine for round-Bar Testing
GE Inspection Technologies
HürthGermany
Fan, Hongfanhong@analysis.org.cnStudy on Automatic Testing of Treads of Running Railroad Wheels
Central Iron & Steel Research Institute
BeijingChina
Fan, HongFanhong58@163.comDevelopment of EMA Guided Wave Technique for Testing of Wires
Central Iron & Steel Research Institute
BeijingChina
Fan, Mengbaofmbcbh@zju.edu.cn,Geometry Parameters Estimation of Defects in Multi-layered Structures Based on Eddy Current Nondestructive Testing Technique with Bayesian Networks A Novel Self-Compensating GMR-Based Eddy Current Probe for Hidden Crack Detection
Zhejiang University,
State Key Laboratory of Industrial Control Technology, Department of Control Science & Engineering
HangzhouChina
Fan, Zhengz.fan@imperial.ac.ukPropagation of torsional waves in a waveguide of arbitrary cross section immersed in a fluid
Imperial College ,
UK Research Centre in Non-destructive Evaluation (RCNDE), Department of Mechanical Engineering
LondonUnited Kingdom
Farley, Mikemfarley@doosanbabcock.comEFNDT Guidelines on the overall NDT quality system in Europe Energy in the future - new challenges for NDT
Doosan Babcock Energy Limited
RenfrewUnited Kingdom
Fedosenko, Yuri K.spektr@co.ruElectromagnetic on-Line Testing of Rolled Products and Tubes. Problems and Solutions
JSC, SPECTRUM-RII
MoscowRussia
and: 50th Anniversary of Non-Destructive Testing in Russia
SPEKTR-GROUP Association
MoscowRussia
Feng, LichunUltrasonic Infrared Thermal Wave Technology and its Applications in Nondestructive Evaluation
Capital Normal University,
Department of Physics
BeijingChina
Feng, Zhanyingfengzhanying@126.comResearch on an Inspection Method for De-bond Defects in Aluminum Skin-Honeycomb Core Sandwich Structure with Guided Waves Research on Line-scan Inspection Method with Guided Waves
Academy of Military Transportation,
Department of Handling Facilities
BeijingChina
Fernandez, Romanroman.fernandez@cea.frSimulation Studies of Radiographic Inspections with CIVA
Commissariat Energie Atomique (CEA)
Gif-Sur-YvetteFrance
Fiala, Jaroslavfialaj@ntc.zcu.czApplication of NDT Procedures for Identification of Fatigue Life Stages of AlMg Alloys
University of West Bohemia
PlzenCzech Republic
Filinov, Mikhail V.market@nio7spectr.ruBasic Principles of the Construction of Residual Resource Estimation Systems Problems of image restoration in metallography
JSC, SPECTRUM-RII
MoscowRussia
Franz, Matthiasmatthias.franz@iis.fraunhofer.deReferenceless Beam Hardening Correction in 3D Computed Tomography Images of Multi-Material Objects
Fraunhofer Institute for Integrated Circuits (IIS)
FürthGermany
Fraudita, Freddyfrauditafa@gmail.comImpedance Tomography and Conductivity Stratification of Cold Rolled Recrystaliced Aluminum Alloy AC Conductivity of Non Magnetic Metallic Alloys
Universidad Central de Venezuela,
Facultad de Ingenieria
CaracasVenezuela
Freytag, RotraudMethod for three-dimensional evaluation and visualisation of the distribution of fibres in glass-fibre reinforced injection molded parts by µ-X-ray computed tomography
Transfercenter für Kunststofftechnik GmbH
WelsAustria
Frolov, Eugenezymsz@elemash.ruThe automated device for leak-testing of nuclear fuel on their manufacturing
JSC Mashinostroitelny Zavod
ElectrostalRussia
Fu, De-YongThin multi-layer plate testing with Ultrasonic Feature Scan Imaging System
Tsinghua University,
Department of Mechanical Engineering
BeijingChina
Fu, Jiankqding@sina.comIndustrial ray DR/ICT integrated inspection testing system (1)  Hardware system
Beijing University of Aeronautics and Astronautics
BeijingChina
Fukutomi, Hiroyukifukutomi@criepi.denken.or.jpDepth Sizing of Surface Breaking Flaw on its Open Side by Short Path of Diffraction Technique
Central Research Institute of Electric Power Industry
KanagawaJapan
Fursov, Andrey S.spektr@co.ruBasic Principles of the Construction of Residual Resource Estimation Systems
JSC, SPECTRUM-RII
MoscowRussia
Gallipoli, Audryaudryevelingn@yahoo.comImpedance Tomography and Conductivity Stratification of Cold Rolled Recrystaliced Aluminum Alloy AC Conductivity of Non Magnetic Metallic Alloys
Universidad Central de Venezuela,
Facultad de Ingenieria
CaracasVenezuela
Gang, Tiegangt@hit.edu.cnUltrasonic TOFD Testing Model for Crack Measurement in Thick Wall Weldment Prediction of side-drilled hole signals captured by a linear phased arrays with steering and focusing beams
Harbin Institute of Technology
HarbinChina
Gao, Jianxinjianxin.gao@twi.co.ukThermal performance of lead-free microelectronic BGA package with defects
Welding Institute (TWI Ltd)
Port TalbotUnited Kingdom
Gao, Xiaoronggxrr@263.netIn-motion ultrasonic testing of the tread of high-speed railway wheels using the inspection system AUROPA III
Southwest Jiaotong University,
Photo-electric Engineering Institute
ChengduChina
Gao, Yifeideeplymove@tom.comResearch on Ultrasonic Velocity Imaging of Metal Matrix Composites with TIRP Method
Beijing University of Aeronautics and Astronautics,
School of Mechanical Engineering and Automation
BeijingChina
Garipov, Vadimgarvad@mail.ruAdaptive Eddy Current Flaw Detectors
Moscow state university of instrument making and informatic
MoscowRussia
Garziera, Rinaldorinaldo.garziera@unipr.it.Health status of ancient buildings: interferometric radar NDT inspection
University of Parma,
Department of Industrial Engineering
ParmaItaly
Gaydecki, Patrickpatrick.gaydecki@manchester.ac.ukAn Automatic Guided Wave Pulse Position Modulation System Using Steel Pipes as a Communication Channel for Flood Detection in Steel Offshore Oilrigs
University of Manchester,
School of Electrical and Electronic Engineering
ManchesterUnited Kingdom
Geng, Rong Shenggengrs@sohu.comStudies on Digital Shearography for Testing of Aircraft Composite Structures and Honeycomb-based Specimen An Overview of the Rapidly Developing Non-Destructive Testing Technology in China Recent Developments of Aircraft Nondestructive Evaluation Based on Advanced Sensor Techniques Non-destructive testing:the guarantee of the success of full scale aircraft fatigue test
Beijing Aeronautical Technology Research Center
BeijingChina
Gerard, Pascalpascal.gerard@valtimet.comEncircling ET Inspection on Corrugated Tubes Destined to Gas Tubes for EGR Heat Exchanger
Valtimet - Vallourec Group
Aulnoye-AymeriesFrance
Gharaibeh, YousefYousef.Gharaibeh@twi.co.ukModelling of guided ultrasonic wave in aircraft wiring
TWI Ltd
CambridgeUnited Kingdom
Gil, Doo-Songkds6801@kepri.re.krResearch for Field Application of Heat Exchanger Facilities using Guided Wave
Korea Electric Power Research Institute,
Non-Destructive Evaluation Center
DaejeonKorea
Gilles-Pascaud, C.catherine.gilles-pascaud@cea.frModelling of Eddy Current inspections with CIVA
Commissariat Energie Atomique (CEA),
LIST
Gif-Sur-YvetteFrance
Ginzel, Edwardeginzel@mri.on.caAdvanced Publishing in NDT
Materials Research Institute
WaterlooCanada
Glotov, Dmitryspektr@co.ruPersonnel Certification and Qualificatioin By the Independent Certification Body
SPEKTR-GROUP Association,
JSC ,MSIA, Spectrum
MoscowRussia
Goebbels, Jürgenjuergen.goebbels@bam.deStructural Index of Metal Matrix Composites Evaluated with Computed Tomography
Federal Institute for Materials Research and Testing (BAM)
BerlinGermany
Gong, Junjiegjj@mail.ioa.ac.cnApplication of ultrasonic phased array in acoustic logging
Chinese Academy of Science, CAS,
Institute of Acoustics
BeijingChina
Gong, Xiufenzligong@nju.edu.cnWater Content Diagnostics of Concrete Using Nonlinear Acoustics Means
Nanjing University,
Key Laboratory of Modern Acoustics of Ministry of Education, Institute of Acoustics
NanjingChina
Gonzalez, C.dejgonzalez@cantv.netImpedance Tomography and Conductivity Stratification of Cold Rolled Recrystaliced Aluminum Alloy AC Conductivity of Non Magnetic Metallic Alloys
Universidad Central de Venezuela,
Facultad de Ingenieria
CaracasVenezuela
Gopalan, Aschwingopalan@rohmann.deA breakthrough in high-speed digital eddy current testing technology
Rohmann GmbH
FrankenthalGermany
Gordely, Vitaly I.cevig@mail.ru,spektr.co.ruDevelopment of Instruments for NDT of Rail-Tracks with Use of Contactless Electromagnetic Acoustic Emission Transducers (EMATs) Development of Instruments for NDT of Rail-Tracks with Use of Contactless Electromagnetic Acoustic Emission Transducers (EMATs)
VIGOR
MoscowRussia
Gorkunov, Edwardges@imach.uran.ruThe feasibility of estimating elastic-plastic strain in powder structural steel with different residual porosity by magnetic methods The effect of hydrogen sulphide on the magnetic behaviour of tube steel X42SS in uniaxial tension A permanent magnet device for measuring the coersive force Magnetic methods for estimating elastic and plastic starins in steels of different classes The application of magnetic, electromagnetic-acoustic and eddy-current methods to the assessment of plastic deformation under cyclic loading of annealed medium-carbon steel
Russian Academy of Sciences, RAS, Ural Branch ,
Institute of Engineering Science
EkaterinburgRussia
Grimberg, Raimondgrimberg@phys-iasi.roEddy current and ultrasound data fusion applied to Carbon Fiber Reinforced Plastic evaluation Electromagnetic sensors array for the determination of soil condition Electromagnetic health monitoring of BSCC prosthetic heart valves US spectroscopy applied to evaluation of some prosthesis made from syntherized zirconium oxides
National Institute of R&D for Technical Physics,
Nondestructive Testing Department
IasiRomania
Grinzato, ErmannoErmanno.Grinzato@itc.cnr.itRecent progresses in the inspection of aerospace components by infrared thermography
Istituto per le Tecnologie della Costruzione - Consiglio (ITC-CNR)
PadovaItaly
Grum, Janezjanez.grum@fs.uni-lj.siInfluence of lack-of-fusion defects on load capacity of MAG welded joints
University of Ljubljana,
Faculty of mechanical engineering
LjubljanaSlovenia
Guild, Jimguildj@saiw.co.zaThe Role of IAEA/AFRA on the Promotion of NDT in Africa
Southern African Institute of Welding (SAIW)
JohannesburgSouth Africa
Guo, EnmingEvaluation of Impact Damages in RTM Stitched Composites by Using Ultrasonic Multiple Imaging Techniques
Beijing Aeronautical Manufacturing Technology Research Institute (BAMTRI) ,
Center of NDT&E
BeijingChina
Guo, GuangpingModeling and analysis of the influence of heating parameters on surface temperature signals
Beijing Institute Of Aeronautical Materials
BeijingChina
Guo, Wenmingguolyuze@hotmail.comThe Optimizing Technology Research of Imaging Quality on X-ray Digital Imaging
Beijing University of Posts and Telecommunication,
School of Software Engineering
BeijingChina
Guo, Xiaoxingxiaoxing.guo@vallourec.frRecognition and Improvement in the Classification of Imperfections Detected by Eddy Current Inspection
CEV – V&M France – Vallourec Group
Aulnoye-AymeriesFrance
Guo, XingwangModeling and analysis of the influence of heating parameters on surface temperature signals
Beihang University,
School of Mechanical Engineering and Automation
BeijingChina
Guo, YunThe Design of High Strength Bolts Scanning  Testing Imaging System Based on the Eddy Current Array Probe
Shanghai research institute of materials
ShanghaiChina
Guse, Gunterguenter.guse@intelligendt.deQualification works for the mechanized Pre-service Inspection (PSI) for the Primary Circuit of the new European Pressurized Water Reactor (EPR)
intelligeNDT Systems & Services GmbH & Co. KG
ErlangenGermany
GÜr, Hakanchgur@metu.edu.trInvestigating the Austempering Parameters of Ductile Iron by Magnetic Barkhausen Noise Technique The Evaluation of Structure-Property Relationships in the Dual Matrix Ductile Iron by Magnetic Barkhausen Noise Analysis Non-destructive Characterization of Pearlite Spheroidisation by Magnetic Barkhausen Noise Method
Middle East Technical University (METU),
Metallurgical and Materials Engineering Dept.
AnkaraTurkey
Ha, Williamdehuashg@online.sh.cn3i in NDT
De Hua Materials Testing Co. Ltd.
Hong KongChina
Habermehl, Jasonjason.habermehl@olympusndt.comUltrasonic phased array tools for composite inspection during maintenance and manufacturing
Olympus NDT
Waltham, MAUSA
Haciane, Selimfairouz_bettayeb@email.comImproving the material ultrasonic characterization and the signal noise ratio by the wavelet packet
University of Science and Technology (USTHB)
AlgiersAlgeria
Han, Diamonddiamond.han@ae.ge.comImmersion Multi-zone Ultrasonic Inspection System of Large-diameter Special Billets
GE Inspection Technologies
ShanghaiChina
Han , Zandonghanzd@tsinghua.edu.cnA Detection Method for the Fuel Balls Passing through the Pipeline of Pebble-Bed High Temperature Gas Cooled Reactor
Tsinghua University,
Department of Mechanical Engineering
BeijingChina
Hansen, John P.John.P.Hansen@ge.comBuried Corrosion Detection in Multi-layer Airframe Structures Using Pulsed Eddy Current Automatic Differential Lift-off Compensation (AD-LOC) Method in Pulsed Eddy Current Inspection
GE Inspection Technologies Ltd.
St. AlbansUnited Kingdom
Harara, Wafikwharara@aec.org.syComments Toward the Harmonization of Qualification and Certification of Non-Destructive Testing Personnel in Arab Countries Digital Radiography in Industry
Atomic Energy Commission of Syria
DamascusSyria
Harrer, Bernhardb.harrer@fh-wels.atOn the Detection of Inhomogeneities in Steel by Computed Tomography
Upper Austrian University of Applied Sciences
WelsAustria
Hasenstab, Andreasandreas.hasenstab@lga.deRadiographic and Tomographic Inspection of Wooden Specimens with Fission Neutrons
TÜV Rheinland, LGA
NürnbergGermany
He, Daibindaibin.he@ge.comNDT Equipment Rental Practice
GE Inspection Technologies
ShanghaiChina
He, Fangchengfengqi_he@163.comResearch on an Inspection Method for De-bond Defects in Aluminum Skin-Honeycomb Core Sandwich Structure with Guided Waves Research on Ultrasonic Velocity Imaging of Metal Matrix Composites with TIRP Method
Beijing Institute Of Aeronautical Materials
BeijingChina
He, FengqiResearch on Pipeline Corrosion and Cracking Inspection by Broad-band Ultrasonic Pig Technology
Beijing Institute of Petrochemical Technology
BeijingChina
He, Fengqifengqi_he@163.comStudies of Broad-band Ultrasonic Techniques for Inspection of Bounding Quality in ITER First Wall
Nuclear Power Institute of China
BeijingChina
He, HuaResearch on and Development of Steam Pipeline Creep Real-time Monitoring System Based on Virtual Instrument Technology
Xidian University,
School of Electromechanical Engineering
Xi'anChina
He, ShiStone_he@163.comResearch on Pipeline Corrosion and Cracking Inspection by Broad-band Ultrasonic Pig Technology
Nuclear Industry Training Center
BeijingChina
He, Yi-Donghyd_88@126.com3D Finite Element Analysis of Marine Steel Plate Magnetic Leakage Testing
Eddysun Electronic Co. Ltd.
XiamenChina
He, Yunzehejicker@163.comArray Pulsed Eddy Current Imaging Technique for Nondestructive Testing of Aging Aircraft
National University of Defense Technology,
College of Mechatronics Engineering and Automation
ChangshaChina
He, Zhenhuizhe@phoenix-xray.comAdvanced NDT with high resolution Computed Tomography
phoenix x-ray Systems + Services GmbH
WunstorfGermany
Henrich, RudolfRudolf.Henrich@airbus.comAutomated Inspection of Complex Composite Components in the Production Cycle
Airbus Deutschland GmbH
BremenGermany
Hentschel, Manfred P.manfred.hentsch@bam.deTrue 3D-CT-reconstruction in comparison to the FDK-algorithm Enhanced Spatial Resolution in 2D CT-Reconstruction without Filtered Back-Projection: DIRECTT
Federal Institute for Materials Research and Testing (BAM)
BerlinGermany
Herelli, FeridDG-cetime@email.ati.tnThe Role of IAEA/AFRA on the Promotion of NDT in Africa
Centre Technique Des Industries Mecaniques et Electriques (CETIME)
TunisTunisia
Herold, Frankfrank.herold@hbg.yxlon.comImage Registration Combining Digital Radiography and Computer-Tomography Image Data
YXLON International X-Ray GmbH
HamburgGermany
Hirama, Yutakayutaka-hirama@jcom.home.ne.jpDetection of wire disconnection using new rope tester
Non-Destructive Inspection Consulting Engineer, Tamiya Cho
UshikuJapan
Hirokawa, Ryutahirokawa.r.aa@m.titech.ac.jpOptimization of Ultrasonic Testing System Applicable to High Manganese Steel Rails
Tokyo Institute of Technology
TokyoJapan
Hola, Jerzyjerzy.hola@pwr.wroc.pl,Nondestructive Elastic-Wave Tests of Post-tensioned Concrete Girders in Road Bridge New Method of Investigation of Rising Damp in Brick Walls by means of Impedance Tomography
Wroclaw University of Technology,
Institute of Building Engineering
WroclawPoland
Homer, Michael Mike-Homer@sens-tech.com,leo-li@teo.com.cnX-ray detection and data acquisition for NDT applications
Sens-Tech Ltd
RuislipUnited Kingdom
Honarvar, Farhanghonarvar@mie.utoronto.caOn the Nondestructive Evaluation of Composite Structures by Liquid-Crystal Thermography Reference wavelets used for deconvolution of ultrasonic time-of-flight diffraction (ToFD) signals Application of signal processing techniques to case depth measurements by ultrasonic method
K. N. Toosi University of Technology,
Faculty of Mechanical Engineering
TehranIran
Hori, Sankeihori@cc.tuat.ac.jpDetection of Electric Discharge Machining State by Using Ultrasonic Technique
Tokyo University of Agriculture and Technology
TokyoJapan
Hou, Runshihrs05@mails.tsinghua.edu.cnReal-time X-ray Image Processing Based on Information Fusion for Weld Defects Detection Segmentation of Weld Defects in X-ray Image Based on Partial Surface Reconstruction
Tsinghua University,
Department of Mechanical Engineering
BeijingChina
Hou, Xiaoqin115518337@163.comSegmentation of Casting Defects in X-Ray Images Based on Fractal Dimension
Chongqing University,
Key Laboratory of Optoelectronic Technology and System of Ministry Education of China, ICT Research Center
ChongqingChina
Hsiao, Chu-Chungcch01@itri.org.twStudy of Ultrasonic Techniques on the inspection of NPP components
Industrial Technology Research Institute
TaiwanTaiwan, China
and: Using ultrasonic pulse velocity to evaluate residual compressive strength of post-fire-curing concrete
National Taichung Institute of Technology,
Department of Interior Design
TaichungTaiwan, China
Hsieh, Feng-JuDevelopment of Automated Electromagnetic Techniques for Inspecting Inner Cracks of LPG Tanks
Industrial Technology Research Institute
TaiwanTaiwan, China
Hsu, David K.dkhsu@iastate.eduNondestructive Inspection of Composite Structures: Methods and Practice
Iowa State University
Ames, Iowa,USA
Hu, Binhubin@csei.org.cnStudy on Magnetic Memory Method (MMM) for Fatigue Evaluation Applied Research of Magnetic Memory Method (MMM) on Amusement Devices The Progress of TOFD Technique in China
China Special Equipment Inspection and Research Institute
BeijingChina
Hu, Helenhelen.hu@ge.com,NDT Equipment Rental Practice
GE Inspection Technologies
ShanghaiChina
Hu, Yingchenghuyingcheng@yahoo.com.cnNon-destructive Testing of Mechanical Parameters for Wood-based Materials
Northeast Forestry University,
Key Laboratory of Bio-based Material Science and Technology of Ministry of Education
HarbinChina
Hua, Yunsonghyuns_yz@163.comInclusion Evaluation of the Slab by the Focused Ultrasonic Method
University of Shanghai for Science and Technology
ShanghaiChina
Huang, Chenrambo_ch@sina.comDevelopment and Application of Pulsed Eddy Current Testing System for Ferromagnetic Pipes
Huazhong University of Science and Technology,
School of Mechanical Science and Engineering
WuhanChina
Huang, Fengyinghfyfeng@163.comA New Testing Method Combining EMAT with Eddy Current
Beijing University of Aeronautics and Astronautics,
School of Mechanical Engineering and Automation
BeijingChina
Huang, Pingjiehuangpingjie@zju.edu.cnGeometry Parameters Estimation of Defects in Multi-layered Structures Based on Eddy Current Nondestructive Testing Technique with Bayesian Networks A Novel Self-Compensating GMR-Based Eddy Current Probe for Hidden Crack Detection
Zhejiang University,
State Key Laboratory of Industrial Control Technology, Department of Control Science & Engineering
HangzhouChina
Huang, Songlinghuangsling@tsinghua.edu.cnStudy on the Lift-off Effect of EMAT
Tsinghua University,
State Key Lab of Power Systems, Dept. of Electrical Engineering
BeijingChina
Huang, Yishuoyishuo@cyut.edu.twTo Identify the weaknesses of concrete from GPR images with employing evolution curve model
Chao Yang University of Technology,
Department of Construction Engineering
Wufeng, TaichungTaiwan, China
Huang, Zuoyinghuangzy75@yahoo.com.cn,hzuoying@sjtu.edu.cn,Three Modeling Methods in MFL Testing
Shanghai Jiaotong University,
Department of Instrument Science and Engineering
ShanghaiChina
Hubben, Edwarded.hubben@ge.comIncreased inspection productivity through advances in Remote Visual Inspection (RVI)
GE Inspection Technologies
Skaneateles, NYUSA
Huggins, Johnandy.chen@kinectrics.comUltrasonic Inspection of Steam Generators at CANDU Power Plants
Ontario Power Generation
TorontoCanada
Hungler, Paulpaul.hungler@rmc.caAn Quantitative Evaluation of the Canadian Forces New Radiology Inspection Systems for the Detection of Water Ingress in CF188 Flight Control Surfaces
Royal Military College of Canada,
Department of Chemistry and Chemical Engineering
Kingston, OntarioCanada
Hus, Sung-Chischsu@cyut.edu.twTo Identify the weaknesses of concrete from GPR images with employing evolution curve model
Chao Yang University of Technology,
Department of Construction Engineering
Wufeng, TaichungTaiwan, China
Hwang, Gwo-Shyanggshwang@ntu.edu.twDynamic Strain Measurement Using Improved Bonding Fiber Bragg Grating
National Taiwan University ,
Department of Mechanical Engineering
TaipeiTaiwan, China
Ibarra-Castanedo, ClementeIbarraC@gel.ulaval.caRecent progresses in the inspection of aerospace components by infrared thermography
Université Laval,
Electrical and Computing Eng
Quebec City, QuebecCanada
Iftimie, Nicoletaniftimie@phys-iasi.roEddy current and ultrasound data fusion applied to Carbon Fiber Reinforced Plastic evaluation
National Institute of R&D for Technical Physics,
Nondestructive Testing Department
IasiRomania
Inoue, Hirotsuguinoueh@mep.titech.ac.jpDesigning of the high spatial resolution phased array transducer for crack type distinction Application of Logarithmic Amplifier to Ultrasonic Imaging Development of Ultrasonic Line-Focus SH-Wave Probe
Tokyo Institute of Technology,
Department of Mechanical and Control Engineering
TokyoJapan
Irie, Hiroshih.irie@ansl.ntt.co.jpDevelopment of reinforced concrete corrosion amount presumption method by ultrasonic method
Nippon Telegraph and Telephone Corporation
TsukubaJapan
Ishikawa, Masaharuishikawa.masaharu@a.mbox.nagoya-u.ac.jpMicrowave Measurement and Quantitative Evaluation of Wall Thinning in Metal Pipes
Nagoya University,
Department of Mechanical Science and Engineering
NagoyaJapan
Ivanov, I.N.kancelaria@vniitfa.ruInstrumental Technique for the Detection and Identification of Radioactive, Fissible and Extrahazardous Substances
Russian National Technical Physics and Automation research Institute, VNIITFA
MoscowRussia
Ivanova, Yonkayonka@imbm.bas.bgApplication of the methods for processing signals from ultrasonic surface waves during the study of induction-tempered materials
Bulgarian Academy of Sciences,
Institute of Mechanics
SofiaBulgaria
JablonickÝ, Pavolplasek@vuje.skThe inspection system for mechanical non-destructive of NPPs type VVER steam generator tube sheet inspection.
VUJE a.s.
TrnavaSlovak Republic
Jaenisch, Gerd-RüdigerJaenisch@bam.deaRTist - Analytical RT Inspection Simulation Tool for Industrial Application
Federal Institute for Materials Research and Testing (BAM)
BerlinGermany
Jaye, StephenSteve.Jaye@sens-tech.comX-ray detection and data acquisition for NDT applications
Sens-Tech Ltd
RuislipUnited Kingdom
Jee, Hyun-Supjeehs@kims.re.krEvaluations on the Composite Bonding Quality by Ultrasonic Amplitude Measurements
Korea Institute of Material Science,
Elevator Technology Group
CHANGWONKorea
Jenstead, Wadewade.jenstead@ge.comAdvances in Eddy Current Array Sensor Technology
GE Inspection Technologies
Lewistown, PAUSA
Jhang, Kyung-Youngkyjhang@hanyang.ac.krEvaluation of Crack Depth Using Nonlinear Acoustic Effect Experimental system dependent factors in the measurement of ultrasonic nonlinear parameter by using contact PZT transducer
Hanyang University,
School of Mechanical Engineering
SeoulKorea
Ji, Dong-Jiangzjkjdj@tom.comAlgebraic Reconstruction Technique Class for Linear Scan CT of Long Object
Chongqing University,
Key Laboratory of Optoelectronic Technology and System of Ministry Education of China, ICT Research Center
ChongqingChina
Jia, Huiminghmjia@analysis.org.cnDevelopment of EMA Guided Wave Technique for Testing of Wires Study on Automatic Testing of Treads of Running Railroad Wheels
Central Iron & Steel Research Institute
BeijingChina
Jian, Xiaomingjxj@phoenixisl.co.ukElectromagnetic Acoustic Transducers for in and out of plane Ultrasonic Wave Detection Fretting Cracking Ultrasonic Detection in Generator Teeth
Phoenix Inspection Systems Ltd
WarringtonUnited Kingdom
Jiang, Gongfengjgf20060724@163.comAnalysis of the Relationship between the Limit Load of Structure and the Microscopic Character
Beijing University of Technology
BeijingChina
Jiao, Jingpinjiaojp@bjut.edu.cnContact defect detection in plates using guided wave and vibro-acoustic modulation
Beijing University of Technology,
Department of Mechanical Engineering
BeijingChina
Jin, Jianhuajianhua.jin@ge.comImmersion Multi-zone Ultrasonic Inspection System of Large-diameter Special Billets
GE Inspection Technologies
ShanghaiChina
Jin, Lianji ryunhee@pusan.ac.krUltrasonic Tomography of Guided Wave
Pusan National University,
Graduate School, School of Mechanical Engineering
PUSANKorea
Jin, Meilingsea_0708@naver.comEvaluation of Crack Depth Using Nonlinear Acoustic Effect
Hanyang University,
Graduate School of Automotive Engineering
SeoulKorea
Johannes, Manfredmjohannes@csir.co.zaAn Investigation into the Performance of Complex Plane Spilt Spectrum Processing Ultrasonics on Composite Materials
CSIR
PretoriaSouth Africa
Joubouji, Katsuojyoubouji@inss.co.jpRound-Robin NDE Testing for Charpy Impact Specimens of Cold-rolled and Thermally Aged Fe-1wt.%Cu Alloys
Institute of Nuclear Safety System Inc.
MihamaJapan
Jovanovic, Milosmilos.jovanovic@i-var.siInfluence of lack-of-fusion defects on load capacity of MAG welded joints
Welding Institute
LjubljanaSlovenia
Ju, No-Hoejnh@kims.re.krEvaluations on the Composite Bonding Quality by Ultrasonic Amplitude Measurements
Korea Institute of Material Science,
Authorized Nuclear Inspection Group
CHANGWONKorea
Ju, Yangju@mech.nagoya-u.ac.jpMicrowave Measurement and Quantitative Evaluation of Wall Thinning in Metal Pipes
Nagoya University,
Department of Mechanical Science and Engineering
NagoyaJapan
Jung, Hyun-Chulyonggary@ieee.orgEstimation of wall thinning defect size and location in pipes by Laser Speckle Interferometry
Chosun University,
Department of Mechanical Design Engineering
GwangjuKorea
Junger, Martin junger@rohmann.deA breakthrough in high-speed digital eddy current testing technology
Rohmann GmbH
FrankenthalGermany
Kaba, MumaNew Techniques for the Quantification of Defects Through Pulsed Magnetic Flux Leakage
University of Newcastle,
School of Electrical, Electronic and Computer Engineering, Merz Court
Newcastle upon TyneUnited Kingdom
Kadouma, MouradNDT as a tool, for Post-Irradiation Examination
Nuclear research center of Birine/COMENA
DjelfaAlgeria
Kamada, Yasuhirokamada@iwate-u.ac.jpRound-Robin NDE Testing for Charpy Impact Specimens of Cold-rolled and Thermally Aged Fe-1wt.%Cu Alloys Relation between Magnetism and Charpy Impact Properties in Thermally Aged Fe-Cu Model Alloys
Iwate University,
Faculty of Engineering, NDE & Science Research Center
MoriokaJapan
Kamath, H.S.Nondestructive Evaluation of Uranium- PLutonium Mixed Oxide(MOX) fuel ts by Gamma Autoradiography
Bhabha Atomic Research Centre
MaharashtraIndia
Kan, Yu-Chengyckan@cyut.edu.twUsing Acoustic Emission Technique for Monitoring Real-time Fracture Behavior within Reinforced Concrete Structure Element under Load Test
Chao Yang University of Technology,
Department of Construction Engineering
Wufeng, TaichungTaiwan, China
Kang, Ki-Sookskang@kriss.re.krFatigue Crack Detection by Ultrasound Infrared Thermography
Korea Research Institute of Standards and Science,
Safety Metrology Group
DaejeonKorea
Kang, Yihuayhkang@263.netThe difference among three reference standards used in the performance evaluation of wire rope EMT instrument
Huazhong University of Science and Technology,
School of Mechanic Engineering
WuhanChina
Kappes, WolfgangUltrasonic and eddy current inspection of rail wheels and wheel set axles
Fraunhofer-Institute for Non-Destructive Testing, IZFP
SaarbrückenGermany
Karpelson, Alexalex.karpelson@kinectrics.comUltrasonic Characterization of Flaws
Kinectrics Inc.
TorontoCanada
Kasai, Naoyan-kasai@ynu.ac.jpThe MFL technique for surface flaws of the weld zone with residual magnetization method
Yokohama National University,
The Graduate School of Environment and Information Sciences
YokohamaJapan
Kashin, Alekseytech@nordinkraft.comIndustrial Ultrasonic Examination of plates with EMAT
Nordinkraft Company
CherepovetsRussia
Kasperl, Stefanstefan.kasperl@iis.fraunhofer.deThe Multi-Sensor Tomolibri® - Measurements with Computed Tomography (CT) Referenceless Beam Hardening Correction in 3D Computed Tomography Images of Multi-Material Objects
Fraunhofer Institute for Integrated Circuits (IIS),
Development Center X-ray Technology, EZRT
FürthGermany
and: The Multi-Sensor Tomolibri® - Measurements with Computed Tomography (CT) Referenceless Beam Hardening Correction in 3D Computed Tomography Images of Multi-Material Objects
Fraunhofer Institute for Integrated Circuits (IIS)
FürthGermany
Kastner, Johannj.kastner@fh-wels.atOn the Detection of Inhomogeneities in Steel by Computed Tomography Method for three-dimensional evaluation and visualisation of the distribution of fibres in glass-fibre reinforced injection molded parts by µ-X-ray computed tomography
Upper Austrian University of Applied Sciences
WelsAustria
Kattis, Spiliossek@envirocoustics.grLoose Parts and Valve Flow Monitoring in Nuclear Power Plants Using Integrated Digital Systems
Envirocoustics S.A.,
A.B.E.E.
AthensGreece
Katz, Davedavid.g.katz@us.army.milHigh-Precision  Internal Diameter Measurement Using Eddy Current Arrays
US Army ARDEC
Picatinny, N.J.USA
Keiich, Hagiwaraezumi@sic.shibaura-it.ac.jpInfluence of Inclusion on Crack Tip in Rotating Disc by Photoelasticity and Caustic Method
Shibaura Institute of Technology,
Applied Dynamics laboratory
TokyoJapan
Kerckhofs, Greetgreet.kerckhofs@mtm.kuleuven.beMechanical characterization of porous structures by the combined use of micro-CT and in-situ loading
Katholieke Universiteit Leuven,
Department of Metallurgy and Materials Engineering
HeverleeBelgium
Kieckhoefer, Hartmuthartmut.kieckhofer@tno.nlImage processing techniques for ultrasonic inspection
TNO Science & Industry
DelftNetherlands
Kikuchi, Hiroakihkiku@iwate-u.ac.jpRound-Robin NDE Testing for Charpy Impact Specimens of Cold-rolled and Thermally Aged Fe-1wt.%Cu Alloys Feasibility Study of Magnetic NDE by Impedance Measurement using Single-yoke
Iwate University,
Faculty of Engineering, NDE & Science Research Center
MoriokaJapan
Kilicli, Volkanvkilicli@gazi.edu.trInvestigating the Austempering Parameters of Ductile Iron by Magnetic Barkhausen Noise Technique
Gazi University,
Technical Education Fac., Dept. of Metallurgy Education
AnkaraTurkey
Kim, Chung Seokchs2865@hanmail.netInfluence of precipitates and dislocations on the acoustic nonlinearity
Seoul National University of Technology,
Dept. of Mechanical Engineering,
SeoulKorea
Kim, Do-Younkdy-1015@hanmail.netApplication of Laser-Generated Ultrasound for Evaluation of Wall-thinning in Carbon Steel Elbow
Pusan National University,
School of Mechanical Engineering
PUSANKorea
Kim, Hak-Joonhjkim21c@skku.eduDevelopment of an Ultrasonic Ray Model for Phased Array Ultrasonic Testing in Austenitic Weldments
Sungkyunkwan University,
School of Mechanical Engineering
SuwonKorea
Kim, Hyun-MinKhmin1127@naver.comDefect detection of Al specimen of using Lock-in photo-infrared thermography technique
Chosun University,
Graduate School
GwangjuKorea
Kim, Koung-Sukgsckim@mail.chosun.ac.krDefect detection of Al specimen of using Lock-in photo-infrared thermography technique Estimation of wall thinning defect size and location in pipes by Laser Speckle Interferometry Determination of Elastic modulus of thin materials by Speckle Interferometry
Chosun University,
Department of Mechanical Design Engineering
GwangjuKorea
Kim, Min-kwennonous@naver.comDefect detection of Al specimen of using Lock-in photo-infrared thermography technique
Chosun University,
Graduate School
GwangjuKorea
Kim, Yong-Kwonyounggun76@snut.ac.krApplication of Ultrasonic Guided Wave to Heat Exchanger Tubes Inspection Application of Non-contact Lamb generated EMAT Technique to Thickness Reduction Inspection
Seoul National University of Technology,
Graduate school of Energy and Environment
SeoulKorea
Kimura, TomonoriKimura.Tomonori@da.MitsubishiElectric.co.jpSimulation of ultrasonic fields and echo signals using cross-section photograph of test object and FDTD method
Mitsubishi Electric Corporation
KamakuraJapan
Kirikera, Gouthams-krishnaswamy@northwestern.eduFiber Bragg Gratings and Two Wave Mixing Spectral Demodulator System for Impact Detection and Localization Real-time dual-channel ultrasonic system for inspection of aircraft structures
Northwestern University
Evanston, ILUSA
Kirikov, Andrejyouwang_song@daks.sh.cnIndustrial Ultrasonic Examination of plates with EMAT
Nordinkraft AG
PforzheimGermany
Kirpichev, AlexandrEddy Probe System on the Basis of New Technology
GlobalTest
SarovRussia
Klimaszewski, SlawomirHolistic Approach for Structural Integrity Evaluation of Composite Main Rotor Blades
Air Force Institute of Technology,
Safety And Reliability Division
WarsawPoland
Klushev, AndreyEddy Probe System on the Basis of New Technology
GlobalTest
SarovRussia
Kluyev, SergeySimulator for Education of Eddy Current Testing Specialists
Moscow state university of instrument making and informatic
MoscowRussia
Klyuev, Sergey V.spektr@co.ruMultiparameter eddy-current NDT method for quality control of thin-sheet, multilayer products and coatings
SPEKTR-GROUP Association,
JSC ,MSIA, Spectrum
MoscowRussia
Klyuev, Vladimir V.spektr@co.ru50th Anniversary of Non-Destructive Testing in Russia
SPEKTR-GROUP Association
MoscowRussia
and: Basic Principles of the Construction of Residual Resource Estimation Systems
JSC, SPECTRUM-RII
MoscowRussia
Knowles, Jimjim.knowles@power.alstom.comFretting Cracking Ultrasonic Detection in Generator Teeth
ALSTOM Power Service,
R&D Inspection Technologies
Switzerland
Kochetkova, Oksana N.expert@safety.ru,spektr@co.ruNDT certification procedure at hazardous production facilities
STC "Industrial Safety"
MoscowRussia
Koehler, Carstenc.Koehler@vogt-ndt.dePROline - ultrasonic testing for electron beam and laser weld seams of transmission control gears - Many more Applications in Production
VOGT Werkstoffprüfsysteme GmbH
BurgwedelGermany
Koetz, Andreaandrea.koetz@ge.comThe Value of DICONDE Line Maintenance Solutions for composite damage evaluation NDT Data Management - Archive and Data Sharing
GE Inspection Technologies
Skaneateles, NYUSA
Kohama, Hiroakikaisei_eng_co@pop07.odn.ne.jpDetermination of Metallic Fatigue in Nitrided Steel using a MDK Magnetic Nondestructive Tester
Kaisei Engineer Co. Ltd
Yamato-shi, KANAGAWAJapan
Koike , Mitsuhirokoikem@rsec.co.jpSimulation of ultrasonic fields and echo signals using cross-section photograph of test object and FDTD method
Ryoden Shonan Electronics Corporation
KamakuraJapan
Kolokolnikov, Sergeymail@energodiagnostika.ruQuality assessment of welded joints  by the metal magnetic memory method compared to conventional NDT methods and means for materials' properties assessment Estimation of gas and oil pipelines condition based on the method of metal magnetic memory. Technical Diagnostics of Equipment and Constructions with Residual Life Assessment Using the Method of Metal Magnetic Memory New Standards ISO 24497 on the Metal Magnetic Memory Method. the Program of Personnel Training and Certification. Stress Testing is a New NDT Type in the Russian Standard GOST R 52330-2005 and International Standard ISO-9712
Energodiagnostika Co. Ltd.
ReutovRussia
Koltsov, Vasily N.koltsov@sebaspectrum.ruEquipment and Mobile Laboratories for Ndt and Diagnostics of Underground Communication Lines
Joint Venture Seba Spektrum
MoscowRussia
Komsky, Igorikomsky@nwu.eduReal-time dual-channel ultrasonic system for inspection of aircraft structures
Northwestern University
Evanston, ILUSA
Kondratiev, Yury A.kondratiev@sebaenergo.ruEquipment and Mobile Laboratories for Ndt and Diagnostics of Underground Communication Lines
Joint Venture Seba Energo
MoscowRussia
Kong, Fan-JinFjkong@263.netApplication of Wide Band AE Sensor in Model Test of Reinforced Concrete Structures
Shanghai COVORDA Electronic Systems Co. Ltd.
ShanghaiChina
Kong, FanjinAE Intelligent Sensor Networks System Used in Tele-Monitoring of Civil Engineering
Shanghai ORDA Optoelectronic Science & Technology Co. Ltd
ShanghaiChina
Kong, Fanqinfanqin.kong@ge.comQuality Evaluation for the Digital Radiography Inspection Based on Imaging Parameters
GE Inspection Technologies
ShanghaiChina
Kononov, Dmitry kononov@echoplus.ruAcoustical Holography Implementation for Defected Rails Inspection
Scientific and Production Center, SPC ECHO+
MoscowRussia
Konovalov, Nikolay N.expert@safety.ru,spektr@co.ruNDT certification procedure at hazardous production facilities
STC "Industrial Safety"
MoscowRussia
Korenská, Martakorenska.m@fce.vutbr.czMonitoring of concrete Components Structure Condition Using Nonlinear Ultrasonic Spectroscopy
Brno University of Technology, BUT,
Faculty of Civil Engineering, Department of Physics
BrnoCzech Republic
Koshino, HiroyukiThe MFL technique for surface flaws of the weld zone with residual magnetization method
Yokohama National University,
The Graduate School of Environment and Information Sciences
YokohamaJapan
Kovalenko, Alexanderdkdt@mail.ru,Resolution of Magnetic Intelligent Tool in Case of Stress-corrosion Cracks Detection
Avtogaz JSC,
Pipeline diagnostic department
MoscowRussia
Kovalev, Alexey A.State and Tendencies of Development in Russia of Portable Non-Cooled IR-Imaging Systems for Search Tasks
JSC, SPECTRUM-RII
MoscowRussia
Kovalev, Alexey V. spektr6@orc.ru,State and Tendencies of Development in Russia of Portable Non-Cooled IR-Imaging Systems for Search Tasks
JSC, SPECTRUM-RII
MoscowRussia
Kreidl, Marcelkreidl@fel.cvut.czUltrasonic Signal De-noising Using Dual Filtering Algorithm
Czech Technical University,
Faculty of Electrical Engineering Department of Measurement
PragueCzech Republic
Kreutzbruck, Marcmarc.kreutzbruck@bam.deHigh Resolution Eddy current testing of superconducting wires using GMR sensors Cellular polypropylene Ferroelectret Film: Piezoelectric Material for non-contact Ultrasonic Transducers Quantitative Defect Sizing on Components with Different Wall Thicknesses Using UT-SAFT
Federal Institute for Materials Research and Testing (BAM)
BerlinGermany
Krishnaswamy, Sridhars-krishnaswamy@northwestern.eduFiber Bragg Gratings and Two Wave Mixing Spectral Demodulator System for Impact Detection and Localization Real-time dual-channel ultrasonic system for inspection of aircraft structures
Northwestern University
Evanston, ILUSA
Kröning, Michaelmichael.kroening@izfp.fraunhofer.deCurrent NDT Research & Development for NPP Inspections Improving the Inspectability of Stainless Steel and Dissimilar Metal Welded Joints Using Inverse Phase-Matching of Phased Array Time-Domain Signals Progress in NDT system engineering through sensor physics and integrated efficient computing
Fraunhofer-Institute for Non-Destructive Testing, IZFP
SaarbrückenGermany
Krumm, Michaelmichael.krumm@iis.fraunhofer.deReferenceless Beam Hardening Correction in 3D Computed Tomography Images of Multi-Material Objects
Fraunhofer Institute for Integrated Circuits (IIS)
FürthGermany
Krys, DennisCharacterization of Impact Test Response of PCCP with System Identification Approaches
National Research Council Canada (NRC),
Institute for Research in Construction
Ottawa, OntarioCanada
Kuhr, SamuelInteraction of Rayleigh Waves Induced by Interdigital Transducer with Fatigue Crack
University of Dayton,
Research Institute
Dayton, OHUSA
Kuna, Martinkuna@vuje.skThe inspection system for mechanical non-destructive of NPPs type VVER steam generator tube sheet inspection.
VUJE a.s.
TrnavaSlovak Republic
Kupsch, AndreasAndreas.Kupsch@bam.deTrue 3D-CT-reconstruction in comparison to the FDK-algorithm Enhanced Spatial Resolution in 2D CT-Reconstruction without Filtered Back-Projection: DIRECTT
Federal Institute for Materials Research and Testing (BAM)
BerlinGermany
Kurokawa, Yukurokawa.y.ab@m.titech.ac.jpOptimization of Ultrasonic Testing System Applicable to High Manganese Steel Rails Designing of the high spatial resolution phased array transducer for crack type distinction
Tokyo Institute of Technology
TokyoJapan
and: Optimization of Ultrasonic Testing System Applicable to High Manganese Steel Rails Designing of the high spatial resolution phased array transducer for crack type distinction
Tokyo Institute of Technology,
Department of Mechanical and Control Engineering
TokyoJapan
Kuzelev, Nikolaykancelaria@vniitfa.ru,spektr@co.ruInstrumental Technique for the Detection and Identification of Radioactive, Fissible and Extrahazardous Substances Gauging Information Systems, Means of Technological Diagnostics and Intelligent Gauges in Nuclear Power Engineering and Industry
Russian National Technical Physics and Automation research Institute, VNIITFA
MoscowRussia
Labbé, Simonsimon.labbe@olympusndt.comHigh-Precision  Internal Diameter Measurement Using Eddy Current Arrays PipeWIZARD Version 4 - a New, Improved Pipeline AUT Girth Weld Inspection System A Complete Solution for Weld Inspections - Phased Arrays and Diffraction Sizing
Olympus NDT
Waltham, MAUSA
Laio, Yu-YuanThermographic inspection of bond quality of FRP strengthed concrete
Chao Yang University of Technology
Wufeng, TaichungTaiwan, China
Lamarre, Andréandre.lamarre@olympusNDT.comUltrasonic phased array tools for composite inspection during maintenance and manufacturing
Olympus NDT
Waltham, MAUSA
Lamb, Andrew S.andrewslamb@yahoo.co.uk,ASL1CMR@bolton.ac.ukBacterial Magnetic Particles for Applications in NDT&E, Detection of Flaws and Cracks in Sample Materials
University of Bolton,
Centre for Materials Research and Innovation
BoltonUnited Kingdom
Lange, Axelaxel.lange@bam.deTrue 3D-CT-reconstruction in comparison to the FDK-algorithm Enhanced Spatial Resolution in 2D CT-Reconstruction without Filtered Back-Projection: DIRECTT
Federal Institute for Materials Research and Testing (BAM)
BerlinGermany
Lapshin, Borisfonon@bk.ruCorrelation leak detector for control of underwater pipeline leakproofness
Tomsk Polytechnic University,
Research Institute of Introscopy
TomskUkraine
Lasser, Bobblasser@imperiuminc.comReal-time dual-channel ultrasonic system for inspection of aircraft structures
Imperium Inc
Silver Spring,MDUSA
Lasserre, Fredericfrederic.lasserre@areva.comQualification works for the mechanized Pre-service Inspection (PSI) for the Primary Circuit of the new European Pressurized Water Reactor (EPR)
AREVA NP SAS
ParisFrance
Laube, JüergenJuergen.Laube@intelligendt.deQualification works for the mechanized Pre-service Inspection (PSI) for the Primary Circuit of the new European Pressurized Water Reactor (EPR)
intelligeNDT Systems & Services GmbH & Co. KG
ErlangenGermany
Lee, JaeIkjaykay_lee@hotmail.comExperimental system dependent factors in the measurement of ultrasonic nonlinear parameter by using contact PZT transducer
Graduate School of Hanyang University,
Automotive Engineering
SeoulKorea
Lee, Jin-HyukJinh419@empal.comApplication of Non-contact Lamb generated EMAT Technique to Thickness Reduction Inspection
Seoul National University of Technology,
Dept. of Mechanical Engineering
SeoulKorea
Lee, Jong-Ojolee@kims.re.krEvaluations on the Composite Bonding Quality by Ultrasonic Amplitude Measurements
Korea Institute of Material Science,
Authorized Nuclear Inspection Group
CHANGWONKorea
Lee, Joon-Hyunjohlee@pusan.ac.krApplication of Laser-Generated Ultrasound for Evaluation of Wall-thinning in Carbon Steel Elbow
Pusan National University,
School of Mechanical Engineering
PUSANKorea
Lee, Seung-Joonleeseungjoon@pusan.ac.krApplication of Laser-Generated Ultrasound for Evaluation of Wall-thinning in Carbon Steel Elbow
Pusan National University,
School of Mechanical Engineering
PUSANKorea
Lee, Seung-Seok sslee@kriss.re.krFatigue Crack Detection by Ultrasound Infrared Thermography
Korea Research Institute of Standards and Science,
Safety Metrology Group
DaejeonKorea
Lee, Tae-Hunoyarlee@hanyang.ac.krEvaluation of Crack Depth Using Nonlinear Acoustic Effect
Hanyang University,
Graduate School of Automotive Engineering
SeoulKorea
Lee, Yung-Chunyunglee@mail.ncku.edu.twNondestructive Determination of Elastic Constants of Thin Plates Based on PVDF Focusing Ultrasound Transducers and Lamb Wave Measurements
National Cheng Kung Univesity,
Department of Mechanical Engeering
TainanTaiwan, China
Lei, HongRecent Developments of Aircraft Nondestructive Evaluation Based on Advanced Sensor Techniques
Beijing Aeronautical Technology Research Center
BeijingChina
Lei, Hua-Minghmlei@sjtu.edu.cnCorrosion Assessment of Offshore Oil Pipeline Based on Ultrasonic Technique Maximum nongaussianity principle for ultrasonic flaw detection
Shanghai Jiaotong University,
Institute of Automatic Detection
ShanghaiChina
and: Corrosion Assessment of Offshore Oil Pipeline Based on Ultrasonic Technique Maximum nongaussianity principle for ultrasonic flaw detection
Shanghai Jiaotong University,
Department of Instrument Science and Engineering
ShanghaiChina
Lepage, Benoitbenoit.lepage@olympusndt.comHigh-Precision  Internal Diameter Measurement Using Eddy Current Arrays
Olympus NDT
Waltham, MAUSA
Lesage, Frédéricfrederic.lesage@vallourec.frSimulation of Digital Filtering to Optimize Pipe Ultrasound Wall Thickness Measurement On Line Analysis and Interpretation of Ultrasonic Images to Improve the Selectivity of the Control Installations for Steel Pipes Recognition and Improvement in the Classification of Imperfections Detected by Eddy Current Inspection
CEV – V&M France – Vallourec Group
Aulnoye-AymeriesFrance
Li, Bangxianlayzjm@163.comResearch on Application of  Pipe Crawling Device Research on Application of  Pipe Crawling Device
China Special Equipment Inspection and Research Institute
BeijingChina
Li, Dong88dong88@sohu.comStudy on ET Technique to Measure Oxide Thickness of Rods for PWR
Nuclear Power Institute of China (NPIC)
ChengduChina
Li, Dongshengdongsheng.li@honeywell.comThe Fluorescene Penetrant Agent Manufacture and Its Wastewater Treatment
Honeywell TAECO Aerospace (Xiamen) Co. Ltd
XiamenChina
Li, Fuquanlifuquan@126.comMagnetic Memory Inspection of High Pressure Manifolds
Xinjiang Petroleum Administration Down-hole Services Company
KelamayiChina
Li, Han-Linstrugle2004@163.com3D Finite Element Analysis of Marine Steel Plate Magnetic Leakage Testing Help Software Design of NDT Instrument Based on FLASH Cartoon 3D Finite Element Analysis of Marine Steel Plate Magnetic Leakage Testing Eddy Current Non-Destructive Testing Application Research of Marine Engines
Jimei University,
Marine Engineering Institute
XiamenChina
Li, Jianlijian_206@sohu.comThe Application of Time-Frequency Transform in Mode Identification of Lamb Waves
Second Artillery Engineering Institute
Xi'anChina
Li, Jiapinglijiaping0990@126.comMagnetic Memory Inspection of High Pressure Manifolds
Xinjiang Petroleum Administration Down-hole Services Company
KelamayiChina
Li, Jiminlijimin77@126.comStudy on the Character of Metal Magnetic Memory Signal in the Course of High-cycle Fatigue Experiment for 16MnR Steel
Beijing University of Technology,
School of Mechanical and Electric Engineering
BeijingChina
Li, LegandEvaluation of Rubber - Composites Bonding Components by Using Laser Electronic Shearography Ultrasonic Evaluation of Friction Stir Welding
Beijing Aeronautical Manufacturing Technology Research Institute (BAMTRI) ,
Center of NDT&E
BeijingChina
Li, LifeiInvestigation on Acoustic Emission of Hydrogen Induced Cracking for Carbon Steel Used in Pressure Vessel
Hebei University
BaodingChina
Li, Luminglilm@tsinghua.edu.cnStudy on the Method of Detection of the Marks of Ferromagnetic Material Based on the Array of Hall Element Progress in Nondestructive Evaluation of Stress Concentration with MMM Method Applied Research of Magnetic Memory Method (MMM) on Amusement Devices
Tsinghua University,
School of aerospace
BeijingChina
Li, Mingliming@cgnpc.com.cnApplication of Ultrasonic Simulation Technology in Technical Justification of in-Service Inspection of Nuclear Power Plant The Developments of Simulation Software for Ultrasonic Testing
Suzhou Nuclear Power Institute
SuzhouChina
Li, Qiangliqiang577@ipp.ac.cnApplication of Infrared Thermography in NDT of Plasma-Facing Components for Tokamaks
Chinese Academy of Science,
Institute of Plasma Physics
HefeiChina
Li, QingThin multi-layer plate testing with Ultrasonic Feature Scan Imaging System
Tsinghua University,
Department of Mechanical Engineering
BeijingChina
Li, Weiliweidqpi@163.comApplication of Acoustic Emission detection Technology on multilayer binding High Pressure Vessel Feature extraction of acoustic emission signals from low carbon steel pitting Based on Independent component analysis and wavelet transforming
Daqing Petroleum Institute,
Mechanical Science and Engineering College
DaqingChina
Li, Xiaolilixiaoli.127@163.comStudies of Broad-band Ultrasonic Techniques for Inspection of Bounding Quality in ITER First Wall
Capital Normal University,
Department of Physics
BeijingChina
Li, Xinxin.li-3@postgrad.manchester.ac.ukCharacterization of Carbon Fibre Reinforced Composite by Means of Non-Destructive Eddy Current Testing and FEM Modeling
University of Manchester
ManchesterUnited Kingdom
Li, Xing-Weili_2004home@yahoo.com.cnStudy on the Penetration Theory of Flaw
Laboratory of Jianshe Industry group
ChongqingChina
Li, Xu-Fenggdsei@126.comMonitor the circumferential welds of Multi-layer Thick-wall Pressure Vessels Serving at Elevated Temperature by Ultrasonic Testing
Guangdong Institute of Special Equipment Inspection
GuangzhouChina
Li, Yantaihuly@163.comNDE Technology of Pressure Equipments in Line with International Standards A Review of Current Status in Applying Special Radiographic Techniques to Pressure Equipment in China
Jiangsu Taihu Boiler Co. Ltd
WuxiChina
Li, Yanhit_liyan@yahoo.com.cnX-Ray Testing Sensitivity of Carbon Fiber Reinforced Aluminium Matrix Composite
Harbin Institute of Technology,
School of Materials Science and Engineering
HarbinChina
Li , Yan-Honglianhongg@126.comInfrared Thermal Wave Nondestructive Evaluation for Antioxide Coating on Metal Substrate Finite Element simulation and Experimental verification of Infrared Thermal Wave Non-destructive Inspection for the Defects in Welded Joint
Beijing Institute of Technology,
School of Information Science Technology
BeijingChina
Li, Yongyongli@ncl.ac.ukA Radio-frequency Measurement System for Metallic Object Detection Using Pulse Modulation Excitation Magnetic Field Mapping for Complex Geometry Defect - 3D Transient Problem
University of Newcastle,
School of Electrical, Electronic and Computer Engineering, Merz Court
Newcastle upon TyneUnited Kingdom
Li, Zong-Jianjoyli11@sohu.comRidgelet Compression Method of Luggage X-ray Inspection Images
Chongqing University,
Key Laboratory of Optoelectronic Technology and System of Ministry Education of China, ICT Research Center
ChongqingChina
Liang, Jingliangjing@yeah.netQuantitative Evaluation of Brazed Joints in Flat Structure with Ultrasonic Inspection method Signal Analysis of Ultrasonic C-Scan Testing for Multi-layer Welding Structure
Beijing Institute Of Aeronautical Materials
BeijingChina
Liang, Lihongliang-li-hong@163.comIndustrial Ray DR/ ICT integration inspection testing system (2) Software and Testing A Method of weld Edge Extraction in the X-ray Linear Diode Arrays Real-time imaging Industrial ray DR/ICT integrated inspection testing system (1)  Hardware system The Optimizing Technology Research of Imaging Quality on X-ray Digital Imaging
China Special Equipment Inspection and Research Institute
BeijingChina
Liang, WeiMaximum nongaussianity principle for ultrasonic flaw detection
Shanghai Jiaotong University,
Department of Instrument Science and Engineering
ShanghaiChina
Liang, YongningThe Ultrasonic Phased Array Inspection Technology Used in Tubular Joint Welds of Offshore Platform Structures
Harbin Institute of Technology
HarbinChina
Liang, Yumeixshd2003@yahoo.com.cnThe Comparison Test Between Two NDT Methods of Magnetic Couple and Touch Head on the Branch Pipe Angle Weld
Shandong Kejie Engineering NDT Co.Ltd
JinanChina
Lin, ChunmingResearch & Development of Integrated MMM/EC/MFL Testing System
Eddysun Electronic Co. Ltd.
XiamenChina
Lin, Dong-Weidongweilin@yahoo.com.twUsing Acoustic Emission Technique for Monitoring Real-time Fracture Behavior within Reinforced Concrete Structure Element under Load Test
Institute of Nuclear Energy Research
TaoyuanTaiwan, China
Lin, FabingResearch & Development of Integrated MMM/EC/MFL Testing System
Eddysun Electronic Co. Ltd.
XiamenChina
Lin, Junminglin_0592@126.com3D Finite Element Analysis of Marine Steel Plate Magnetic Leakage Testing The Advent of Age with Integrated NDT Technology Help Software Design of NDT Instrument Based on FLASH Cartoon NDT Integrated Technology Based on Computer Network The NDT Study of Metal Composite Material Tube A Novel NDT Method for Measuring Thickness of Brush-Electroplated Nickel Coating on Ferrous Metal Sueface A Study of Inspecting the Stress on Downhole Metal Casing in Oilfields with Magnetic Memory Method Eddy Current Non-Destructive Testing Application Research of Marine Engines Study on ET Technique to Measure Oxide Thickness of Rods for PWR A New Testing Method Combining EMAT with Eddy Current
Eddysun Electronic Co. Ltd.
XiamenChina
and: 3D Finite Element Analysis of Marine Steel Plate Magnetic Leakage Testing
Jimei University,
Marine Engineering Institute
XiamenChina
Lin, Lilinli_ndt@hotmail.comExperimental investigation on porosity of carbon fiber-reinforced composite using ultrasonic attenuation coefficient
Dalian University of Technology,
School of Materials Science & Engineering, NDT & E Laboratory
DalianChina
Lin, Shanshanlin@criepi.denken.or.jpDepth Sizing of Surface Breaking Flaw on its Open Side by Short Path of Diffraction Technique
Central Research Institute of Electric Power Industry
KanagawaJapan
Lin, Shang-Yuhsylin@cyut.edu.twTo Identify the weaknesses of concrete from GPR images with employing evolution curve model
Chao Yang University of Technology,
Department of Construction Engineering
Wufeng, TaichungTaiwan, China
Lin, Shuqinglin_shuqing@csei.org.cnDevelopment and Application of Pulsed Eddy Current Testing System for Ferromagnetic Pipes
China Special Equipment Inspection and Research Institute
BeijingChina
Lin, Shusenjlsyjhy@yahoo.com.cnData Computing Disk of  Line Convergent Detector
QianGuo Refinery SongYuan City
SongyuanChina
Lin, Yichingyiching@nchu.edu.twUsing ultrasonic pulse velocity to evaluate residual compressive strength of post-fire-curing concrete
National Chung-Hsing University,
Department of Civil Engineering
TaichungTaiwan, China
Lin, ZhenWangwarder@public.xm.fj.cnThe Fluorescene Penetrant Agent Manufacture and Its Wastewater Treatment
Xiamen Chemical Industry Machinary Plant
XiamenChina
Liskutin, Petrliskutin@fme.vutbr.czApplication of NDT Procedures for Identification of Fatigue Life Stages of AlMg Alloys
Brno University of Technology, BUT,
Faculty of Mechanical Engineering
BrnoCzech Republic
Liu, Bao-Donglbd1688@126.comAlgebraic Reconstruction Technique Class for Linear Scan CT of Long Object
Chongqing University,
Key Laboratory of Optoelectronic Technology and System of Ministry Education of China, ICT Research Center
ChongqingChina
Liu, BinLiubin_jkg@163.comLow-frequency magnetic current features Fault Indication Film Used in Magnetic Nondestructive Testing
Beijing Jinkeguang Technology Co. Ltd.
BeijingChina
Liu, Chaoking_magus@sina.comDesign of Transmission Scheme for Radiation Detection &Management Information
CEEG (Nan jing) Pv-Tech Co. Ltd
NanjingChina
Liu, FeifeiEvaluation of Rubber - Composites Bonding Components by Using Laser Electronic Shearography Evaluation of Impact Damages in RTM Stitched Composites by Using Ultrasonic Multiple Imaging Techniques Ultrasonic Evaluation of Friction Stir Welding
Beijing Aeronautical Manufacturing Technology Research Institute (BAMTRI) ,
Center of NDT&E
BeijingChina
Liu, Fujunlfj_dq@126.comMagnetic Flux Leakage and Acoustic Emission Testing Technique for Atmospheric Storage tanks Magnetic Flux Leakage and Acoustic Emission Testing Technique for Atmospheric Storage tanks Acoustic Emission in-service detection of cryogenic storage tank floors
Zhejiang Provincial Special Equipment Inspection and Research Institute
HangzhouChina
Liu, Gangxeslg@163.comInspection and Identification of Inner-Outer Defects on Oil-Gas Pipeline Effect of Lift-off on Pipeline Magnetic Flux Leakage Inspection
Shenyang University Of Technology
ShenyangChina
Liu , Jin-Pingliujinping103@sina.comDesign of Transmission Scheme for Radiation Detection &Management Information
No.8 Bureau of China Construction Co., Ltd,
Detection Center
NanjingChina
Liu, Jinhong Application of Ultrasonic Simulation Technology in Technical Justification of in-Service Inspection of Nuclear Power Plant
China Nuclear Power Technology Research Institute
ShenzhenChina
Liu, Junyanljywlj@hit.edu.cnAn IR Lock-in Thermography Nondestructive Test System Based on the Image Sequence Processing
Harbin Institute of Technology,
School of Mechatronics Engineering
HarbinChina
Liu, LinshengLiu@mech.nagoya-u.ac.jpMicrowave Measurement and Quantitative Evaluation of Wall Thinning in Metal Pipes
Nagoya University,
Department of Mechanical Science and Engineering
NagoyaJapan
Liu, Pei-Lingpeiling@iam.ntu.edu.twImaging of internal cracks in concrete structures using the VOLUME rendering technique
National Taiwan University ,
Institute of Applied Mechanics
TaipeiTaiwan, China
Liu, Qingxindlts_liuqx@petrochina.com.cnA Study of Inspecting the Stress on Downhole Metal Casing in Oilfields with Magnetic Memory Method
Daqing Logging & Testing Services Company
DaqingChina
Liu, Songpingliusping@publicb.bta.net.cnEvaluation of Rubber - Composites Bonding Components by Using Laser Electronic Shearography The Application of Time-Frequency Transform in Mode Identification of Lamb Waves Evaluation of Impact Damages in RTM Stitched Composites by Using Ultrasonic Multiple Imaging Techniques Ultrasonic Evaluation of Friction Stir Welding
Beijing Aeronautical Manufacturing Technology Research Institute (BAMTRI) ,
Center of NDT&E
BeijingChina
Liu, Taoliutao@huaneng.netStudy on Signal Denoising in Casting Ultrasonic Testing Based on Translation Invariant
Xi'an University of Science and Technology,
Safe Technology Institute
Xi'anChina
LIU, Tongtliu@simtech.a-star.edu.sgCT Reconstruction with Good-Orientation and Layer Separation for Multilayer Objects
Singapore Institute of Manufacturing Technology
SingaporeSingapore
Liu, Xiaozhouxzliu@nju.edu.cnWater Content Diagnostics of Concrete Using Nonlinear Acoustics Means
Nanjing University,
Key Laboratory of Modern Acoustics of Ministry of Education, Institute of Acoustics
NanjingChina
Liu, XinUltrasonic Feature Imaging System for Testing Bimetal Rotor Clad Layer
Tsinghua University,
Department of Mechanical Engineering
BeijingChina
Liu, Xueyingftg.lxy@163.comImmersion Multi-zone Ultrasonic Inspection System of Large-diameter Special Billets
Fushun Special Steel Co. Ltd
FushunChina
Liu, Xun-Fengxunfeng619@sina.comThe Ultrasonic Feature Imaging Testing of special structure
Nanchang Hang Kong University,
Key Laboratory of Nondestructive Testing, Ministry of Education
NanchangChina
Liu, Yingtaoyingt.liu@163.comModeling and analysis of the influence of heating parameters on surface temperature signals
Beijing Institute Of Aeronautical Materials
BeijingChina
Liu, Zhengzheng.liu@nrc-cnrc.gc.ca,liuzheng@canada.comCharacterization of Impact Test Response of PCCP with System Identification Approaches
National Research Council Canada (NRC),
Institute for Research in Construction
Ottawa, OntarioCanada
Loktev, Igor I.nccp@sol.ru,The automated device for leak-testing of nuclear fuel on their manufacturing
JSC Novosibirsk Chemical Concentrates Plant, NCCP
NovosibirskRussia
Long, Feifeidqpilf@126.comFeature extraction of acoustic emission signals from low carbon steel pitting Based on Independent component analysis and wavelet transforming
Daqing Petroleum Institute,
Mechanical Science and Engineering College
DaqingChina
Lopes, Miguelmiguel.lopes@valtimet.comEncircling ET Inspection on Corrugated Tubes Destined to Gas Tubes for EGR Heat Exchanger
Changzhou Carex Valinox Components Co. Ltd
Aulnoye-AymeriesChina
Lopes, Ricardo Tadeuricardo@lin.ufrj.brGamma Ray System Operated by Divers for Underwater Inspection
Federal University of Rio de Janeiro (UFRJ)
Rio de JaneiroBrazil
Lou, Min-Zhundt@shcdc.com.cnThe Design of High Strength Bolts Scanning  Testing Imaging System Based on the Eddy Current Array Probe
Shanghai research institute of materials
ShanghaiChina
Lowe, Michaelm.lowe@imperial.ac.ukFeasibility Studey of Blockage Detection Inside Pipes Using Guided Ultrasonic Waves Propagation of torsional waves in a waveguide of arbitrary cross section immersed in a fluid Long Range Guided Wave Pipe Inspection - the Advantages of Focusing
Imperial College ,
UK Research Centre in Non-destructive Evaluation (RCNDE), Department of Mechanical Engineering
LondonUnited Kingdom
López, Vicenteviloma@csa.upv.esProcedure for NDT and Traditional Methods of Ancient Buildings Diagnosis, by Using Thermograph,Digital Images and Other Instruments Data Analysis.
Polytechnic University of Valencia,
Architectonic Construction Department
ValenciaSpain
Lu, Cheng Binclu@itee.uq.edu.auApplication of Bare Piezoelectric Ceramics in Monitoring Resin Transfer Moulding (RTM) Process
University of Queensland,
School of Information Technology and Electrical Engineering
Brisbane, QLD Australia
Lu, Ming-Huilunara@163.comThe Ultrasonic Feature Imaging Testing of special structure Ultrasonic Feature Imaging System for Testing Bimetal Rotor Clad Layer Thin multi-layer plate testing with Ultrasonic Feature Scan Imaging System
Nanchang Hang Kong University,
Key Laboratory of Nondestructive Testing, Ministry of Education
NanchangChina
Lugg, Martinmartin@tscinspectionsystems.com,The First 20 Years of the A.C. Field Measurement Technique
TSC Inspection Systems
Milton KeynesUnited Kingdom
Luo, Fei-Luflluo@nudt.edu.cnArray Pulsed Eddy Current Imaging Technique for Nondestructive Testing of Aging Aircraft Data Fusion for Combining Techniques to in Situ Detect Defects of Turbine Blade Borescope and Eddy Current Dual Probe for in Situ Detecting Cracks in an Aeroengine Labyrinth Disc A Novel Approach for Nonlinear Distortion Correction of Industrial Endoscope Images 3D Magnetic Field Responses to a Defect Using a Tangential Driver-coil for Pulsed Eddy Current Testing Impedance Evaluation of a Probe-Coil's Lift-off and Tilt Effect in Eddy-Current Nondestructive Inspection by 3D Finite Element Modeling
National University of Defense Technology,
College of Mechatronics Engineering and Automation
ChangshaChina
Luo, Guang-Nangnluo@ipp.ac.cnApplication of Infrared Thermography in NDT of Plasma-Facing Components for Tokamaks
Chinese Academy of Science,
Institute of Plasma Physics
HefeiChina
Luo, Ming Experimental investigation on porosity of carbon fiber-reinforced composite using ultrasonic attenuation coefficient
Beijing Aerospace Research Institute of Materials and Processing Technology
BeijingChina
Ma, Chien-Chingccma@ntu.edu.twDynamic Strain Measurement Using Improved Bonding Fiber Bragg Grating
National Taiwan University ,
Department of Mechanical Engineering
TaipeiTaiwan, China
Ma, Hongweimahw@xust.edu.cnStudy on Signal Denoising in Casting Ultrasonic Testing Based on Translation Invariant Application of Wavelet Analysis to Signal De-noising in Ultrasonic Testing of Welding Flaws
Xi'an University of Science and Technology,
School of Mechanical Engineering
Xi'anChina
Ma, Jianken.ma@imperial.ac.ukFeasibility Studey of Blockage Detection Inside Pipes Using Guided Ultrasonic Waves
Imperial College ,
UK Research Centre in Non-destructive Evaluation (RCNDE), Department of Mechanical Engineering
LondonUnited Kingdom
Ma, Xuerongmaxuerong827@163.comMethod for Dynamic State Monitoring of Pressure Vessel
Pressure Vessel Testing Center
MianyangChina
Maes, Guygmaes@zetec.comon the Use of Advanced UT Phased Array Methodology and Equipment
Zetec
Quebec City, QuebecCanada
Maev, Roman Gr.maev@uwindsor.caComparison between in - line ultrasonic monitoring of the spot weld quality and conventional NDT methods applied in a real production environment
University of Windsor
Windsor, OntarioCanada
Mahaut, Stevesteve.mahaut@cea.frAdvanced Matrix Phased Array Settings for Inspection
Commissariat Energie Atomique (CEA)
Gif-Sur-YvetteFrance
Maier, Josefjosef.maier@bohler-edelstahl.atRipple and Uniformity Measurement of a Phased-Array Testing-Machine for round-Bar Testing
Böhler Edelstahl GmbH
KapfenbergAustria
Maisl, Michaelmichael.maisl@izfp.fraunhofer.deThe Multi-Sensor Tomolibri® - Measurements with Computed Tomography (CT)
Fraunhofer-Institute for Non-Destructive Testing, IZFP,
Development Center X-ray Technologies (EZRT)
SaarbrückenGermany
Makarov, Alexei V.makarov@imach.uran.ruInvestigation of friction and abrasive effects in engineering steels with micromagnetic measurements The application of magnetic, electromagnetic-acoustic and eddy-current methods to the assessment of plastic deformation under cyclic loading of annealed medium-carbon steel
Russian Academy of Sciences, RAS, Ural Branch ,
Institute of Engineering Science
EkaterinburgRussia
and: Investigation of friction and abrasive effects in engineering steels with micromagnetic measurements The application of magnetic, electromagnetic-acoustic and eddy-current methods to the assessment of plastic deformation under cyclic loading of annealed medium-carbon steel
Russian Academy of Sciences, RAS, Ural Branch
EkaterinburgRussia
Maldague, Xaviermaldagx@gel.ulaval.caRecent progresses in the inspection of aerospace components by infrared thermography
Université Laval,
Electrical and Computing Eng
Quebec City, QuebecCanada
Manoharan, N.Euclidean Distance Based Color Image Segmentation Algorithm for Dimensional Characterization of Lack of Penetration from Weld Thermographs for on-Line Weld Monitoring in GTAW
Sathyabama University,
Institute of Science and Technology
ChennaiIndia
Manychova, Monikamanychova.m@fce.vutbr.czMonitoring of concrete Components Structure Condition Using Nonlinear Ultrasonic Spectroscopy
Brno University of Technology, BUT,
Faculty of Civil Engineering, Department of Building Structures
BrnoCzech Republic
Mao, Yimeiymmao@sjtu.edu.cnUltrasonic Thickness Inspection of Oil Pipeline Based on Marginal Spectrum of Hilbert-Huang Transform
Shanghai Jiaotong University,
Department of Instrument Science and Engineering
ShanghaiChina
Marchand, Benoîtbenoit.marchand@cea.frRecent Developments of Multi-elements Eddy Currents Probes
Commissariat Energie Atomique (CEA),
LIST
Gif-Sur-YvetteFrance
Marinho, Carlacarlamarinho@petrobras.com.brGamma Ray System Operated by Divers for Underwater Inspection
Petrobras S.A,
Research Center, CENPES
Rio de JaneiroBrazil
Marques, Franciscofranciscocrm@petrobras.com.brUltrasonic Guided Waves - Evaluation of Trials for Pipeline Inspection
Petrobras S.A,
E&P Inspection Engineering
Rio de JaneiroBrazil
Martinez, FernandoAn Automatic Guided Wave Pulse Position Modulation System Using Steel Pipes as a Communication Channel for Flood Detection in Steel Offshore Oilrigs
Instituto de Investigaciones Eléctricas
CuernavacaMexico
Maslov, Alexander I.market@nio7spectr.ruX-Ray Thickness Gauges of the RIT10 Family for Thickness Measurement at Line Production of Rolled Metal
SPEKTR-GROUP Association
MoscowRussia
and: Problems of image restoration in metallography
JSC, SPECTRUM-RII
MoscowRussia
Mason, John S. D An Holistic Approach to Automatic Classification of Steel Plate Corrosion Defects using Magnetic Flux Leakage
Swansea University,
School of Engineering
SwanseaUnited Kingdom
Mast, Arjanarjan.mast@tno.nlImage processing techniques for ultrasonic inspection POD Generator, Development of numerical modeling tools for quantitative assessment of the performance of  non-destructive inspection techniques Permanent corrosion monitoring using guided waves
TNO Science & Industry
DelftNetherlands
Matkowski, Zygmuntz.matkowski@pwr.wroc.plNew Method of Investigation of Rising Damp in Brick Walls by means of Impedance Tomography
Wroclaw University of Technology,
Institute of Building Engineering
WroclawPoland
Matysík, Michalmatysik.m@fce.vutbr.czMonitoring of concrete Components Structure Condition Using Nonlinear Ultrasonic Spectroscopy
Brno University of Technology, BUT,
Faculty of Civil Engineering, Department of Physics
BrnoCzech Republic
Matz, Vaclavvmatz@seznam.czAutomatic System for Crack Detection Using Infrared Thermographic Testing
Starmans Electronics
PragueCzech Republic
and: Separation of Signals Acquired with EMAT in Dual Coil Configuration Ultrasonic Signal De-noising Using Dual Filtering Algorithm
Czech Technical University,
Faculty of Electrical Engineering Department of Measurement
PragueCzech Republic
Maurer, Albrechtalbrecht.maurer@ge.comAutomated Inspection of Complex Composite Components in the Production Cycle
GE Inspection Technologies
AlzenauGermany
Mayes, IanIan.Mayes@ge.comAutomatic Differential Lift-off Compensation (AD-LOC) Method in Pulsed Eddy Current Inspection
GE Inspection Technologies Ltd.
St. AlbansUnited Kingdom
Mazal, Pavelmazal@fme.vutbr.czApplication of NDT Procedures for Identification of Fatigue Life Stages of AlMg Alloys
Brno University of Technology, BUT,
Faculty of Mechanical Engineering
BrnoCzech Republic
Mclay, Alexalex.mclay@sonovation.comIntegrated Time of Flight Diffraction Set Up Software
Sonovation Ltd
CheshireUnited Kingdom
McNab, James Rjmcnab@oceaneering.comComputed Radiography deployed subsea by a Romotely Operated Vehicle
Oceaneering International Inspection
Aberdeen, ScotlandUnited Kingdom
Mei, Gangmgang@i-a-i.comWireless Ultrasonic Transducer Network for Structural Health Monitoring of an Aircraft Wing
Intelligent Automation Inc.
RockvilleUSA
Menaka, M.ksm@igcar.gov.inCharacterisation of Colmonoy Coatings using Lock-in Thermography
Indira Gandhi Centre for Atomic Research
KalpakkamIndia
Metala, Michaelmike.metala@siemens.comRecent Advances in NDE Technologies for Turbines and Generators
Siemens Power Generation USA
PittsburghUSA
Michel, Fritzfritz.michel@ovgu.deElectromagnetic Imaging using Probe Arrays
University of Magdeburg
MagdeburgGermany
Michnowski, Wladyslawultrasonic@home.plUltrasonic Examination of
Zaklad Badan Materialow (ZBM) ULTRA
WroclawPoland
Mierzwa, Jaroslawjaroslaw.mierzwa@ultra.wroclaw.plUltrasonic Examination of
Zaklad Badan Materialow (ZBM) ULTRA
WroclawPoland
Migoun, Nikolai P.migoun@iaph.bas-net.byNon-destructive testing in Belarus The ways of penetrant testing applicability for rough surfaces
National Academy of Sciences of Belarus,
Institute of Applied Physics (IAPH)
MinskBelarus
Mijarez, Ritormijarez@iie.org.mxAn Automatic Guided Wave Pulse Position Modulation System Using Steel Pipes as a Communication Channel for Flood Detection in Steel Offshore Oilrigs
Instituto de Investigaciones Eléctricas,
Gerencia de Control e Instrumentación
CuernavacaMexico
Miller, Malcolmmalcolm.miller@shell.comDevelopment, Validation and Execution of the Automated Ultrasonic Testing of a Subsea Pipeline Hot Tap Weld
Shell Exploration and Production
Aberdeen, ScotlandUnited Kingdom
Mimount, Samiramimount@cnesten.org.maISO 17020 Accreditation of CNETSTEN NDT Laboratory Part 1
CNESTEN,
NDT laboratory
RabatMorocco
Mis, Rafalrafal.mis@ultra.wroclaw.plUltrasonic Examination of
Zaklad Badan Materialow (ZBM) ULTRA
WroclawPoland
Misu, KoichiroMisu.Koichiro@cs.MitsubishiElectric.co.jpSimulation of ultrasonic fields and echo signals using cross-section photograph of test object and FDTD method
Mitsubishi Electric Corporation
KamakuraJapan
Miszczak, MaciejDetection of Defects  in Composite Pyrotechnic Materials and Products by IR NDT Methods
Military Institute of Armament Technology
ZielonkaPoland
Mitropolskaya, Sofia Yu.The feasibility of estimating elastic-plastic strain in powder structural steel with different residual porosity by magnetic methods
Russian Academy of Sciences, RAS, Ural Branch ,
Institute of Engineering Science
EkaterinburgRussia
Miura, Takahirotakahiro.miura@toshiba.co.jpVisualization of weld defects in water by laser-ultrasonics
Toshiba Corporation
YokohamaJapan
Miyauchi, Hidekazumiyauchi-hidekazu@aist.go.jpLaser Ultrasonic Technique for Visualizing Ultrasonic Waves Propagating on 3-D Object
Advanced Industrial Science and Technology (AIST),
Research Institute of Instrumentation Frontier
TsukubaJapan
Mizutani, Yoshihiroymizutan@mes.titech.ac.jpOptimization of Ultrasonic Testing System Applicable to High Manganese Steel Rails Designing of the high spatial resolution phased array transducer for crack type distinction
Tokyo Institute of Technology,
Department of Mechanical and Control Engineering
TokyoJapan
and: Optimization of Ultrasonic Testing System Applicable to High Manganese Steel Rails Designing of the high spatial resolution phased array transducer for crack type distinction
Tokyo Institute of Technology,
Department of Mechanical Science and Engineering
TokyoJapan
Mohr, Gregorygreg.mohr@ge.comFactors affecting Probability of Detection with Computed Radiography
GE Inspection Technologies
Lewistown, PAUSA
Moles, MichaelMichael.moles@olympusndt.comPipeWIZARD Version 4 - a New, Improved Pipeline AUT Girth Weld Inspection System Olympus NDT Training Academy Manual phased arrays for weld inspections using North American codes Getting Phased Array Approvals and Certifications Curved Arrays for Improved Inspection of Small Pipe Welds A Complete Solution for Weld Inspections - Phased Arrays and Diffraction Sizing
Olympus NDT
Waltham, MAUSA
Mook, Gerhardmook@mb.uni-magdeburg.de,Electromagnetic Imaging using Probe Arrays Eddy Current Tools for Education and Innovation
University of Magdeburg
MagdeburgGermany
Morbidini, Marcomarcomando@libero.it,The Reliable Implementation of Thermosonics NDT
Imperial College ,
UK Research Centre in Non-destructive Evaluation (RCNDE), Department of Mechanical Engineering
LondonUnited Kingdom
Moriya, Yuutamoriyay@mep.titech.ac.jpDevelopment of Ultrasonic Line-Focus SH-Wave Probe
Tokyo Institute of Technology,
Department of Mechanical and Control Engineering
TokyoJapan
Morse, Bradfordbradford.morse@ge.comIncreased inspection productivity through advances in Remote Visual Inspection (RVI)
GE Inspection Technologies
Skaneateles, NYUSA
Moser, Eberhardgermany@dantecdynamics.comDetection capabilities of state-of-the-art Shearography systems
Dantec-Ettemeyer
UlmGermany
Mu, Jingjxm1006@psu.eduRecent Advances on Guided Waves in Pipe Inspection
Pennsylvania State University
University Park, PAUSA
Mukherjee, DipankerNondestructive Evaluation of Uranium- PLutonium Mixed Oxide(MOX) fuel ts by Gamma Autoradiography
Bhabha Atomic Research Centre,
Advanced Fuel fabrication Facility
MaharashtraIndia
Murakami, TakekoInspection of thick part with Phased Array Volume Focusing Thick Part Inspection using Volume Focusing Technique and Large Aperture Phased Array A Breakthrough in Sputtering Target Inspections: Ultra-High Speed Phased Array Scanning with Volume Focusing
KJTD Co. Ltd.
OsakaJapan
Murikov, Sergeymurs56@mail.ruFirmware System for diagnostics of the mill rolls
Research-Training Center (RTC)
MagnitogorskRussia
Murner, Christinechristine.murner@ge.comIncreased inspection productivity through advances in Remote Visual Inspection (RVI) Buried Corrosion Detection in Multi-layer Airframe Structures Using Pulsed Eddy Current Line Maintenance Solutions for composite damage evaluation
GE Inspection Technologies
Lewistown, PAUSA
Murty, G.M.D.gmdm@sail-rdcis.comApplication of Portable Non-Destructive Testing Instruments to Enhance Performance of Hot Strip Mill Rolls.
Steel Authority of India,
R&D Centre
RanchiIndia
Muzhitsky, Vladimir F.spektr@co.ruComputerized Portable Eddy-Current Flaw Detectors Low Frequency Acoustic (Impedance) Flaw Detectors of the New Generation and Their Application
JSC, SPECTRUM-RII
MoscowRussia
Na, Jeongjeong.na@sbcglobal.netInteraction of Rayleigh Waves Induced by Interdigital Transducer with Fatigue Crack Detection of Hidden Flaws with GMR-based Eddy Current Technique
University of Dayton,
Research Institute
Dayton, OHUSA
Nachimuthu, Kuppuswamynksamy@gmail.comCase Studies on Uncertainties of Ultrasonic Weld Testing Interpretation
Non Destructive Testing Society (Singapore)
SingaporeSingapore
Nadim, Arnaudjarnaud.nadim@cea.frInspection of Complex Geometries Using Flexible Phased-Array Transducers
Commissariat Energie Atomique (CEA),
LIST
SaclayFrance
Nandhitha, N.M.Euclidean Distance Based Color Image Segmentation Algorithm for Dimensional Characterization of Lack of Penetration from Weld Thermographs for on-Line Weld Monitoring in GTAW
Sathyabama University,
Institute of Science and Technology
ChennaiIndia
Nanekar, Paritoshpnanekar@barc.gov.inNon-Destructive Examination for Ageing Management of Indian Nuclear Power Plants
Bhabha Atomic Research Centre (BARC),
Quality Assurance Division
MumbaiIndia
Nardoni, Giuseppenardoni@numerica.itSizing in Phased Array Technique using Diffraction and Amplitude Displacement
I&T Nardoni Institute
BresciaItaly
Nardoni, PietroSizing in Phased Array Technique using Diffraction and Amplitude Displacement
I&T Nardoni Institute
BresciaItaly
Naseem, Akhternaseemalig@gmail.comDetermination of Elastic modulus of thin materials by Speckle Interferometry
Chosun University,
Department of Mechanical Design Engineering
GwangjuKorea
Neild, Simon A.simon.neild@bristol.ac.ukDetectability of kissing bonds using the non-linear high frequency transmission technique Contact defect detection in plates using guided wave and vibro-acoustic modulation
University of Bristol,
Department of Mechanical Engineering
BristolUnited Kingdom
and: Detectability of kissing bonds using the non-linear high frequency transmission technique Contact defect detection in plates using guided wave and vibro-acoustic modulation
University of Bristol,
Department of Mechanical Engineering, Advanced Control and Testing Laboratory
BristolUnited Kingdom
Nel, Mark Dmn@technologydesign.comTD Handy-Scan, a New Alternative in Hand Held Advanced Ultrasonic Equipment
AGR Technology Design
WinsfordUnited Kingdom
Nestleroth, J. Brucenestlero@battelle.orgDetection of Protective Coating Disbonds in Pipe Using Circumferential Guided Waves
Battelle Memorial Institute
Columbus, OHUSA
Netzelmann, Udoudo.netzelmann@izfp.fraunhofer.deInduction Thermography as a Tool for Reliable Detection of Surface Defects in Forged Components
Fraunhofer-Institute for Non-Destructive Testing, IZFP
SaarbrückenGermany
Neumayer, Dirk A.dirk.neumayer@ipa.fraunhofer.deThe Multi-Sensor Tomolibri® - Measurements with Computed Tomography (CT)
Fraunhofer Institut Produktionstechnik und Automatisierung
Stuttgart Germany
Newman, Johnjnewman@laserndt.com,Aerospace NDT with Advanced Laser Shearography
Laser Technology Inc.
Norristown, PAUSA
Ng, Normandehua@hknet.com3i in NDT
De Hua Materials Testing Co. Ltd.
Hong KongChina
Nichipuruk, Aleksandr P.nichip@imp.uran.ruFirmware System for diagnostics of the mill rolls
Russian Academy of Sciences, RAS, Ural Branch ,
Institute of metal physics
EkaterinburgRussia
Nicholson, IanIan.Nicholson@twi.co.ukThermal performance of lead-free microelectronic BGA package with defects
Welding Institute (TWI Ltd)
Port TalbotUnited Kingdom
Nishiwaki, Nobuhikonisiwaki@cc.tuat.ac.jpDetection of Electric Discharge Machining State by Using Ultrasonic Technique
Tokyo University of Agriculture and Technology
TokyoJapan
Nourrit, Nicolasnicolas.nourrit@vallourec.frSimulation of Digital Filtering to Optimize Pipe Ultrasound Wall Thickness Measurement
CEV – V&M France – Vallourec Group
Aulnoye-AymeriesFrance
Novikov, Svyatoslavmigoun@iaph.bas-net.byNon-destructive testing in Belarus
National Academy of Sciences of Belarus,
Institute of Applied Physics (IAPH)
MinskBelarus
Noypitak, Maipanu999997@hotmail.comStatus of the Thai Society for Nondestructive Testing and NDT in Thailand
King Mongkut’s University of Technology Thonburi
BangkokThailand
Ochiai, M.mak.ochiai@toshiba.co.jpVisualization of weld defects in water by laser-ultrasonics
Toshiba Corporation
YokohamaJapan
Ogata, Takashishanlin@criepi.denken.or.jpDepth Sizing of Surface Breaking Flaw on its Open Side by Short Path of Diffraction Technique
Central Research Institute of Electric Power Industry
KanagawaJapan
Oka, Kenjioka@probe-kgk.comNew Ultrasonic Guided Wave Testing using Remote Excitation of Trapped Energy Mode
KGK Co. Ltd.
KawasakiJapan
Onoe, Moriom.onoe@ieee.orgNew Ultrasonic Guided Wave Testing using Remote Excitation of Trapped Energy Mode
University of Tokyo
TokyoJapan
Onuki, Akiyoshionuki_ja2007@yahoo.co.jpDetermination of Metallic Fatigue in Nitrided Steel using a MDK Magnetic Nondestructive Tester
Yamagata University (Formerly)
Yonezawa-shi,YamagataJapan
Opheys, MichaelMichael.Opheys@siemens.comAdvanced NDE inspection methods for detection of SCC in blade attachments and blade roots
Siemens Power Generation
MülheimGermany
Osterloh, Kurt R.S.kurt.osterloh@bam.deRadiographic and Tomographic Inspection of Wooden Specimens with Fission Neutrons
Federal Institute for Materials Research and Testing (BAM)
BerlinGermany
Ovchinnikov, Alekseyovchinnikov_al@inbox.ruCorrelation leak detector for control of underwater pipeline leakproofness
Tomsk Polytechnic University,
Research Institute of Introscopy
TomskUkraine
Ozer, Melikamozer@gazi.edu.trThe Evaluation of Structure-Property Relationships in the Dual Matrix Ductile Iron by Magnetic Barkhausen Noise Analysis
Gazi University,
Technical Edu. Faculty, Metallurgical Education Dept.
AnkaraTurkey
Özkan, Vildanvozkan@hotmail.comDetermination of Relation Between Elastic Constant and Sintered Temperature in WC-Ni Composites
Afyon Kocatepe University,
Physics Dept.
AfyonTurkey
Padovese, Linilsonlrpadove@usp.brComparison Between Creep Failure Analysis and Magnetic Barkahusen Noise Results
Universidade de S.Paulo (USP),
Laboratório de Dinâmica
Sao PauloBrazil
Palaia, Lilianalpalaia@csa.upv.esProcedure for NDT and Traditional Methods of Ancient Buildings Diagnosis, by Using Thermograph,Digital Images and Other Instruments Data Analysis.
Polytechnic University of Valencia,
Architectonic Construction Department
ValenciaSpain
Pan, Mengchunpmc_nudt@vip.163.comData Fusion for Combining Techniques to in Situ Detect Defects of Turbine Blade Borescope and Eddy Current Dual Probe for in Situ Detecting Cracks in an Aeroengine Labyrinth Disc
National University of Defense Technology,
College of Mechatronics Engineering and Automation
ChangshaChina
Panakkal, Jose P.joseatafff@yahoo.co.inNondestructive Evaluation of Uranium- PLutonium Mixed Oxide(MOX) fuel ts by Gamma Autoradiography
Bhabha Atomic Research Centre,
Advanced Fuel fabrication Facility
MaharashtraIndia
Pardikar, R.Jrjp@bheltry.co.inDigital Radiography and Computed Radiography for enhancing the Quality and Productivity of weldments in Boiler components
Bharat Heavy Electricals Limited, BHEL,
SDGM / NDT
TiruchirappalliIndia
Park, Ik Keunikpark@snut.ac.krApplication of Non-contact Lamb generated EMAT Technique to Thickness Reduction Inspection Influence of precipitates and dislocations on the acoustic nonlinearity Application of Ultrasonic Guided Wave to Heat Exchanger Tubes Inspection
Seoul National University of Technology,
Dept. of Mechanical Engineering
SeoulKorea
and: Application of Non-contact Lamb generated EMAT Technique to Thickness Reduction Inspection Influence of precipitates and dislocations on the acoustic nonlinearity Application of Ultrasonic Guided Wave to Heat Exchanger Tubes Inspection
Seoul National University of Technology,
Research Institute of NDE Technology
SeoulKorea
Park, Jong-Hyunumziwangza@hanmail.netEstimation of wall thinning defect size and location in pipes by Laser Speckle Interferometry
Chosun University,
Graduate school
GwangjuKorea
Park, Sae-Junysas@kepri.re.krApplication of Ultrasonic Guided Wave to Heat Exchanger Tubes Inspection
Seoul National University of Technology,
Dept. of Mechanical Engineering
SeoulKorea
Park, Sang-Kiskpak@kepri.re.krResearch for Field Application of Heat Exchanger Facilities using Guided Wave
Korea Electric Power Research Institute,
Non-Destructive Evaluation Center
DaejeonKorea
Park, Seung-Kyu skpark4@kaeri.re.krDetection of a Surface-Breaking Crack Depth by Using the Surface Waves of Multiple Laser Beams
Korea Atomic Energy Research Institute (KAERI)
DaejeonKorea
Park, Tae Sungtaesung78@snut.ac.krInfluence of precipitates and dislocations on the acoustic nonlinearity
Seoul National University of Technology,
Graduate school of Energy and Environmen
SeoulKorea
Partalin, Todortopart@fmi-uni.sofia.bgApplication of the methods for processing signals from ultrasonic surface waves during the study of induction-tempered materials
Sofia University St. Kliment Ohridski,
Faculty of Mathematics and Informatics
SofiaBulgaria
Parvin, Nadernparvin@aut.ac.irPrediction of density in porous materials by x-ray techniques
Amir Kabir University of Tech (AUT)
TehranIran
Paul, Thomastpaul@phoenix-xray.comzhe@phoenix-xray.comAdvanced NDT with high resolution Computed Tomography
phoenix x-ray Systems + Services GmbH
WunstorfGermany
Pearson, NeilAn Holistic Approach to Automatic Classification of Steel Plate Corrosion Defects using Magnetic Flux Leakage
Swansea University,
School of Engineering
SwanseaUnited Kingdom
Pei, Kuang-Chihkcpei@yahoo.com.twUsing Acoustic Emission Technique for Monitoring Real-time Fracture Behavior within Reinforced Concrete Structure Element under Load Test
Institute of Nuclear Energy Research
TaoyuanTaiwan, China
Peliks, Evgenyinfo@spectroflash.ruX-ray pulse apparatus based on explosive electron emission
Spectroflash Ltd
St-PetersburgRussia
Peng, Mu-ChungMuChungPeng@itri.org.twDevelopment of Automated Electromagnetic Techniques for Inspecting Inner Cracks of LPG Tanks
Industrial Technology Research Institute
TaiwanTaiwan, China
Peng, Xuelianpengxuelian@timegroup.com.cnCalibration Method Study of Ultrasonic Thickness Gauge
TIME GROUP Inc. Bejing
BeijingChina
Pereira, Giorgiogiorgio@eln.gov.brCase Studies of Electric Power Equipment Diagnostics Using Acoustic Emission
Eletronorte,
Technology Center
Belem, PABrazil
Perov, Dmitryperoff@imp.uran.ruMicrodefect Detection in High-Temperature Resistant Steel by Using Ultrasound Laser Interferometer Ultrasonic Pulse Signal Diffraction from Different Flaws in Elastic Media
Russian Academy of Sciences, RAS, Ural Branch ,
Institute of Metal Physics
EkaterinburgRussia
Peyton, Anthony Ja.peyton@manchester.ac.ukCharacterization of Carbon Fibre Reinforced Composite by Means of Non-Destructive Eddy Current Testing and FEM Modeling
University of Manchester
ManchesterUnited Kingdom
Pfeifer, Franzfranz.pfeifer@fh-hagenberg.atMethod for three-dimensional evaluation and visualisation of the distribution of fibres in glass-fibre reinforced injection molded parts by µ-X-ray computed tomography
Upper Austrian University of Applied Sciences
WelsAustria
Pichenot, Gregoiregregoire.pichenot@cea.frModelling of Eddy Current inspections with CIVA
Commissariat Energie Atomique (CEA),
LIST
Gif-Sur-YvetteFrance
Pincu, Ronsales@vidisco.comDigital Radiography and its Advantages in Field NDT Inspections Today
Vidisco Ltd.
Or-YehudaIsrael
Pivovarov, IvanOptimization of structure and operation algorithms for electromagnetic plated coatings thickness meters with the use of digital technologies
Constanta ltd
St-PetersburgRussia
PlÁŠek, Josefplasek@vuje.skThe inspection system for mechanical non-destructive of NPPs type VVER steam generator tube sheet inspection.
VUJE a.s.
TrnavaSlovak Republic
Plotnikov, Yuriplotnikov@crd.ge.comEddy Current Measurement of Case Hardened Depth of Steel Components
GE Global Research
Niskayuna NYUSA
Podoliako, Sergeypsv@kiam.ruUse of Monte-Carlo method for the reconstruction of response functions and radiation spectra in radiography
Russian Academy of Sciences,
Keldysh Institute for Applied Mathematics
MoscowRussia
Pohl, Rainerrainer.pohl@bam.deThe Important Role of Eddy Current Testing in Railway Track Maintenance
Federal Institute for Materials Research and Testing (BAM)
BerlinGermany
Poirier, Jeromejerome.poirier@ge.comQualification of Manual Phased Array Ultrasonic Techniques for Pipe Weld Inspection in Nuclear Power Plants
GE Inspection Technologies
LimonestFrance
Postula, Adam adam@itee.uq.edu.auApplication of Bare Piezoelectric Ceramics in Monitoring Resin Transfer Moulding (RTM) Process
University of Queensland,
School of Information Technology and Electrical Engineering
Brisbane, QLD Australia
Pörtzgen, Nielsniels.portzgen@applusrtd.comIWEX: a new ultrasonic array technology for direct imaging of subsurface defects
Applus RTD
RotterdamNetherlands
Prateepasen, Asaasa.pra@kmutt.ac.thStatus of the Thai Society for Nondestructive Testing and NDT in Thailand Acoustic Emission Transferability using Transfer Function
King Mongkut’s University of Technology Thonburi
BangkokThailand
Pu, Yunmicalking@163.comStudy on the Penetration Theory of Flaw
Chongqing University,
Key Laboratory of Optoelectronic Technology and System of Ministry Education of China, ICT Research Center
ChongqingChina
Pushkina, Irinapushkina@spektr.ruPersonnel Certification and Qualificatioin By the Independent Certification Body
SPEKTR-GROUP Association,
JSC ,MSIA, Spectrum
MoscowRussia
Puthillath, Padma Kumarpup120@psu.eduInspection of Adhesively Bonded Joints Using Ultrasonic Guided Waves
Pennsylvania State University
University Park, PAUSA
Qi, Ailingqiailing1@126.comStudy on Signal Denoising in Casting Ultrasonic Testing Based on Translation Invariant
Xi'an University of Science and Technology,
Department of Computer Science
Xi'anChina
Qi, Gongjinqgjin@sina.comRecent Developments of Aircraft Nondestructive Evaluation Based on Advanced Sensor Techniques
Beijing Aeronautical Technology Research Center
BeijingChina
Qi, Panqp928@163.comApplication of Infrared Thermography in NDT of Plasma-Facing Components for Tokamaks
Chinese Academy of Science,
Institute of Plasma Physics
HefeiChina
Qi, Xinqixin@mail.buct.edu.cnTesting Instrument for Internal Stress of Long Seamless Rails
Beijing University of Chemical Technology
BeijingChina
Qi, Xuexxq104@psu.eduUltrasonic Guided Wave Nondestructive Testing for Helicopter Rotor Blade
Pennsylvania State University,
Department of Engineering Science and Mechanics
University Park, PAUSA
Qian, Taotqian@i-a-i.comWireless Ultrasonic Transducer Network for Structural Health Monitoring of an Aircraft Wing
Intelligent Automation Inc.
RockvilleUSA
Qiao, Joanna X.joanna.Qiao@ge.comAutomatic Differential Lift-off Compensation (AD-LOC) Method in Pulsed Eddy Current Inspection
GE Inspection Technologies Ltd.
St. AlbansUnited Kingdom
Qu, Cai-YuanThe Utrasonic Detection of the Large Welded Gear
Chongqing gearbox limited liability corporation
ChongqingChina
Que, Pei-wenpwque@sjtu.edu.cnThree Modeling Methods in MFL Testing Corrosion Assessment of Offshore Oil Pipeline Based on Ultrasonic Technique Maximum nongaussianity principle for ultrasonic flaw detection Ultrasonic Thickness Inspection of Oil Pipeline Based on Marginal Spectrum of Hilbert-Huang Transform
Shanghai Jiaotong University,
Department of Instrument Science and Engineering
ShanghaiChina
and: Three Modeling Methods in MFL Testing Corrosion Assessment of Offshore Oil Pipeline Based on Ultrasonic Technique Maximum nongaussianity principle for ultrasonic flaw detection Ultrasonic Thickness Inspection of Oil Pipeline Based on Marginal Spectrum of Hilbert-Huang Transform
Shanghai Jiaotong University,
Institute of Automatic Detection
ShanghaiChina
Quirk, Karlk.quirk@phoenixisl.co.ukElectromagnetic Acoustic Transducers for in and out of plane Ultrasonic Wave Detection
Phoenix Inspection Systems Ltd
WarringtonUnited Kingdom
Rachny, Siegfriedsiegfried.rachny@ApplusRTD.deImproved Procedure for Computed Radiography - a Comparative Study on Welded Tube Sections by Film Radiography and Computed Radiography
Applus RTD Inspektionsgesellschaft mbH
FrechenGermany
Raj, Baldevdir@igcar.ernet.in,Characterisation of Colmonoy Coatings using Lock-in Thermography
Indira Gandhi Centre for Atomic Research
KalpakkamIndia
Rani, B. Sheelasri_kavi_sheela@yahoo.co.inEuclidean Distance Based Color Image Segmentation Algorithm for Dimensional Characterization of Lack of Penetration from Weld Thermographs for on-Line Weld Monitoring in GTAW
Sathyabama University,
Institute of Science and Technology
ChennaiIndia
Raouraou, Brahimfairouz_bettayeb@email.comThe reliability of the ultrasonic characterization of welds by the artificial neural network
University of Science and Technology (USTHB)
AlgiersAlgeria
Rauschenbach, HansHans.Rauschenbach@siemens.comAdvanced NDE inspection methods for detection of SCC in blade attachments and blade roots
Siemens Power Generation
MülheimGermany
Reboud, Christophechristophe.reboud@cea.frModelling of Eddy Current inspections with CIVA
Commissariat Energie Atomique (CEA),
LIST
Gif-Sur-YvetteFrance
Reddy, K.M.Improving the Inspectability of Stainless Steel and Dissimilar Metal Welded Joints Using Inverse Phase-Matching of Phased Array Time-Domain Signals
Qnet Engineering Ltd.
ChennaiIndia
Regez, Brads-krishnaswamy@northwestern.eduReal-time dual-channel ultrasonic system for inspection of aircraft structures
Northwestern University
Evanston, ILUSA
Reinhart, Christofinfo@volumegraphics.comIndustrial Computer Tomography - a Universal Inspection Tool
Volume Graphics GmbH
HeidelbergGermany
Ren, Jilinjlren@tom.comNDT Integrated Technology Based on Computer Network The NDT Study of Metal Composite Material Tube Experimental Research on the Microcosmic Mechanism of Stress-magnetic Effect for Magnetic Memory Testing Simulation of Stress-magnetization Effect on 18CrNi4A Steel by ANSYS Numerical Value Analysis of Eddy Current Probe Coil of Placement Model Based on ANSYS
Nanchang Hang Kong University,
Key Laboratory of Nondestructive Testing, Ministry of Education
NanchangChina
Ren, Shangkunrenshangkun@nju.org.cnExperimental Research on the Microcosmic Mechanism of Stress-magnetic Effect for Magnetic Memory Testing
Nanchang Hang Kong University,
Key Laboratory of Nondestructive Testing, Ministry of Education
NanchangChina
Reshetouski, Iliyaatuk@iaph.bas-net.by3D Image Reconstruction from Low Energy and Noisy X-ray Projection Data
National Academy of Sciences of Belarus,
Institute of Applied Physics (IAPH)
MinskBelarus
Rett, Sandrosandrorett@bol.com.brComputed Radiography and Microtomography of Riveted Lap Joints of GlareTM Subjected to Constant Amplitude Loading (CAL) Fatigue
Federal University of Pernambuco
Recife-PEBrazil
Reverdy, Fredericfrederic.reverdy@cea.frAdvanced Matrix Phased Array Settings for Inspection
Commissariat Energie Atomique (CEA)
Gif-Sur-YvetteFrance
Rezghi Maleki, Hadihadi_rezghi59@yahoo.comOn the Nondestructive Evaluation of Composite Structures by Liquid-Crystal Thermography
Bonab University,
Faculty of Engineering
BonabIran
Ribeiro, Joao Gabriel Hgreaves@eletronuclear.gov.brProgress in NDT system engineering through sensor physics and integrated efficient computing
Centro de Avaliacao Nao Destrutiva (CAND)
Rio de JaneiroBrazil
Richard, Danieldrichard@zetec.comon the Use of Advanced UT Phased Array Methodology and Equipment
Zetec
Quebec City, QuebecCanada
Rinkevich, Anatolyrin@imp.uran.ruUltrasonic Pulse Signal Diffraction from Different Flaws in Elastic Media
Russian Academy of Sciences, RAS, Ural Branch ,
Institute of Metal Physics
EkaterinburgRussia
Rockstroh, BerndBernd.Rockstroh@izfp.fraunhofer.deUltrasonic and eddy current inspection of rail wheels and wheel set axles
Fraunhofer-Institute for Non-Destructive Testing, IZFP
SaarbrückenGermany
Romero ramirez, Aliciaa.romero-ramirez.436912@swan.ac.ukAn Holistic Approach to Automatic Classification of Steel Plate Corrosion Defects using Magnetic Flux Leakage
Swansea University,
School of Engineering
SwanseaUnited Kingdom
Rongen, HeinzAutomated MPI Test Fluid Quality Checks and Dye Penetrant Tam Panel Tests Automated Dye Penetrant Systems with Process Control and Documentation in the Aerospace Industry
Forschungszentrum Jülich,
Institut ZEL
JülichGermany
Rose, Joseph L.jlresm@engr.psu.eduDetection of Protective Coating Disbonds in Pipe Using Circumferential Guided Waves Recent Advances on Guided Waves in Pipe Inspection Guided Wave Thickness Measurement Tomography for Structural Health Monitoring in Critical Zones of Pipelines Inspection of Adhesively Bonded Joints Using Ultrasonic Guided Waves Ultrasonic Guided Wave Nondestructive Testing for Helicopter Rotor Blade Ultrasonic Tomography of Guided Wave
Pennsylvania State University,
Department of Engineering Science and Mechanics
University Park, PAUSA
Rost, Peterpeter.rost@basf.comA new fully digital system for RT inspection of metal tube to tube sheet joints of heat exchangers
BASF
LudwigshafenGermany
Ruan, Jiangjunruan308@126.comThe difference among three reference standards used in the performance evaluation of wire rope EMT instrument
Wuhan University,
School of Electrical Engineering
WuhanChina
Rubbers, Philippephilippe.rubbers@eskom.co.zaAn Investigation into the Performance of Complex Plane Spilt Spectrum Processing Ultrasonics on Composite Materials
SCM
SunnighillSouth Africa
Russell, Daviddrussell@russelltech.comIncreased Use of Remote Field Technology for in-line Inspection of Pipelines Proves the Value of the Technology for this Application
Russell NDE Systems Inc.
EdmontonCanada
Saadatnia, Mohammadalim_saadatnia92@yahoo.comComparing Sound Absorption Characteristic of Acoustic boards made of Aspen Particles and Different Percentage of Wheat and Barely Straws
Tehran University,
Wood and Paper Industry Faculty of Natural Resources
KarajIran
Sahaimi, Kamalsahaimi@cnesten.org.ma,ISO 17020 Accreditation of CNETSTEN NDT Laboratory Part 1
CNESTEN,
NDT laboratory
RabatMorocco
Sakurada, Yousukeyousuke_sakurada@ansl.ntt.co.jpDevelopment of reinforced concrete corrosion amount presumption method by ultrasonic method
Nippon Telegraph and Telephone Corporation
TsukubaJapan
Salzburger, Hans-Jürgen salzburger@izfp.fhg.deIn-motion ultrasonic testing of the tread of high-speed railway wheels using the inspection system AUROPA III
Fraunhofer-Institute for Non-Destructive Testing, IZFP
SaarbrückenGermany
Samarin, Pavel samarin@echoplus.ruUltrasonic Testing of Austenitic Welds at the Russian NPP
Scientific and Production Center, SPC ECHO+
MoscowRussia
Samokrutov, Andery A.samokrutov@acsys.ruElectromagnetic-Acoustic Transducers for in-Service Manual Testing of Heated Objects Application of Phased Arrays in Combination with Virtual Dynamic Focusing for Ultrasonic Tomographic Imaging of Metals Ultrasonic Echo-Pulse Tomography of Concrete Using Shear Waves Low-Frequency Phased Antenna Arrays
JSC, SPECTRUM-RII
MoscowRussia
Sangirardi, Michelemichele.sangirardi@polimi.itPerformance of UT creeping waves in crack sizing
Politecnico di Milano,
Department of Mechanical Engineering
MilanoItaly
Santana, Danilo M.V.danilosistemas@yahoo.com.brComputed Radiography and Microtomography of Riveted Lap Joints of GlareTM Subjected to Constant Amplitude Loading (CAL) Fatigue
Federal University of Pernambuco
Recife-PEBrazil
Santos Filho, Oswaldoogsf@eln.gov.brCase Studies of Electric Power Equipment Diagnostics Using Acoustic Emission
Eletronorte,
Technology Center
Belem, PABrazil
Sarpün, Ismail Hakkiisarpun@yahoo.comDetermination of Relation Between Elastic Constant and Sintered Temperature in WC-Ni Composites
Afyon Kocatepe University,
Physics Dept.
AfyonTurkey
Sasahara, Toshihikosasahara@criepi.denken.or.jpApplication of Logarithmic Amplifier to Ultrasonic Imaging
Central Research Institute of Electric Power Industry
KanagawaJapan
Sato, Fumitoshihkiku@iwate-u.ac.jpFeasibility Study of Magnetic NDE by Impedance Measurement using Single-yoke
Iwate University,
Faculty of Engineering, NDE & Science Research Center
MoriokaJapan
Sato, YujiRelation between Magnetism and Charpy Impact Properties in Thermally Aged Fe-Cu Model Alloys
Iwate University,
NDE & Science Research Center, Faculty of Engineering
MoriokaJapan
Savin, Adrianaasavin@phys-iasi.roEddy current and ultrasound data fusion applied to Carbon Fiber Reinforced Plastic evaluation Eddy current and ultrasound data fusion applied to Carbon Fiber Reinforced Plastic evaluation Electromagnetic sensors array for the determination of soil condition Electromagnetic health monitoring of BSCC prosthetic heart valves US spectroscopy applied to evaluation of some prosthesis made from syntherized zirconium oxides
National Institute of R&D for Technical Physics,
Nondestructive Testing Department
IasiRomania
Savrai, Roman A.ras@imach.uran.ruThe application of magnetic, electromagnetic-acoustic and eddy-current methods to the assessment of plastic deformation under cyclic loading of annealed medium-carbon steel
Russian Academy of Sciences, RAS, Ural Branch ,
Institute of Engineering Science
EkaterinburgRussia
Sánchez, Rafaelrsanchez@grea.upv.esProcedure for NDT and Traditional Methods of Ancient Buildings Diagnosis, by Using Thermograph,Digital Images and Other Instruments Data Analysis.
Polytechnic University of Valencia,
Physics Department
ValenciaSpain
Schabowicz, Krzysztofk.schabowicz@pwr.wroc.plNondestructive Elastic-Wave Tests of Post-tensioned Concrete Girders in Road Bridge New Method of Investigation of Rising Damp in Brick Walls by means of Impedance Tomography
Wroclaw University of Technology,
Institute of Building Engineering
WroclawPoland
Schrooten, Janjan.schrooten@mtm.kuleuven.beMechanical characterization of porous structures by the combined use of micro-CT and in-situ loading
Katholieke Universiteit Leuven,
Department of Metallurgy and Materials Engineering
HeverleeBelgium
Schumm, Andreasandreas.schumm@edf.frSimulation Studies of Radiographic Inspections with CIVA
Electricité de France (EDF) R&D
ClamartFrance
Segura, Alejandraalejandra.segura@vallourec.frOn Line Analysis and Interpretation of Ultrasonic Images to Improve the Selectivity of the Control Installations for Steel Pipes
CEV – V&M France – Vallourec Group
Aulnoye-AymeriesFrance
Sekine, Kazuyoshi k-sekine@ynu.ac,jpThe MFL technique for surface flaws of the weld zone with residual magnetization method
Yokohama National University,
The Graduate School of Environment and Information Sciences
YokohamaJapan
Shah, Bijoy Kumarbkshah@barc.gov.inNon-Destructive Examination for Ageing Management of Indian Nuclear Power Plants
Bhabha Atomic Research Centre (BARC),
Quality Assurance Division
MumbaiIndia
Shan, Baohuashanbaohua@hit.edu.cnThe Ultrasonic Phased Array Inspection Technology Used in Tubular Joint Welds of Offshore Platform Structures
Harbin Institute of Technology
HarbinChina
Shan, Hong-Binshanhongbin@cgnpc.com.cnThe Developments of Simulation Software for Ultrasonic Testing
Suzhou Nuclear Power Institute
SuzhouChina
Shan, YingchunStudy on Characteristic of Thin Layer Rubber Based on Ultrasonic Echo Testing
Dalian Maritime University,
Electromechanics and Material Engineering College
DalianChina
Shang, Haixiahaixia.shang@twi.co.ukThermal performance of lead-free microelectronic BGA package with defects
Welding Institute (TWI Ltd)
Port TalbotUnited Kingdom
Shao, Jiaxinsgx22ster@gmail.comReal-time X-ray Image Processing Based on Information Fusion for Weld Defects Detection Segmentation of Weld Defects in X-ray Image Based on Partial Surface Reconstruction
Tsinghua University,
Department of Mechanical Engineering
BeijingChina
Shaternikov, Viktor E.crd64274@oss.ruMultiparameter eddy-current NDT method for quality control of thin-sheet, multilayer products and coatings
SPEKTR-GROUP Association,
JSC ,MSIA, Spectrum
MoscowRussia
Shen, Chuanjunchuanjunshen@sohu.comThe Affection of Pipes Characteristics to Exciting Frequency for Guided Waves NDT Study on Simulation of Guided Wave Propagation in Pipes
Naval University of Engineering,
College of Ship and Power
WuhanChina
Shen, Gongtianshen_gongtian@csei.org,Progress of Nondestructive Testing and Evaluation in China Study on the Character of Metal Magnetic Memory Signal in the Course of High-cycle Fatigue Experiment for 16MnR Steel Applied Research of Magnetic Memory Method (MMM) on Amusement Devices Study on Magnetic Memory Method (MMM) for Fatigue Evaluation The Acoustic Emission Monitoring During the Bending Test of Q235 Steel Box Beam Investigation on Acoustic Emission of Hydrogen Induced Cracking for Carbon Steel Used in Pressure Vessel The Progress of TOFD Technique in China Signal Processing for Guided Waves Testing Based on Magnetostrictive Effect
China Special Equipment Inspection and Research Institute
BeijingChina
Shen, Jinglingjinglingshen@gmail.comStudies of Broad-band Ultrasonic Techniques for Inspection of Bounding Quality in ITER First Wall
Capital Normal University,
Department of Physics
BeijingChina
Shen, LihuaThe Affection of Pipes Characteristics to Exciting Frequency for Guided Waves NDT Study on Relationship between Amplitudes of Reflection Signals and Positions of Magnetostrictive Transducer
Naval University of Engineering,
College of Ship and Power
WuhanChina
Shen, Vincentvshen@russelltech.comIncreased Use of Remote Field Technology for in-line Inspection of Pipelines Proves the Value of the Technology for this Application
Russell NDE Systems Inc.
EdmontonCanada
Shevaldykin, Viktor G.spektr@co.ruElectromagnetic-Acoustic Transducers for in-Service Manual Testing of Heated Objects Application of Phased Arrays in Combination with Virtual Dynamic Focusing for Ultrasonic Tomographic Imaging of Metals Ultrasonic Echo-Pulse Tomography of Concrete Using Shear Waves Low-Frequency Phased Antenna Arrays
JSC, SPECTRUM-RII
MoscowRussia
Shevchenko, Vasiliy P.expert@safety.ru,spektr@co.ruNDT certification procedure at hazardous production facilities
STC "Industrial Safety"
MoscowRussia
Shi, Changl-iangbarrystone@163.comInfluence of Stress Concentration Factor on Magnetic Memory Effect of Steel Samples under Dynamic Tension Load
Academy of Armored Forces Engineering,
National Key Laboratory for Remanufacturing
BeijingChina
Shi, Yiweiyiwei_shi@yahoo.com.cnQuantitative Evaluation of Brazed Joints in Flat Structure with Ultrasonic Inspection method Signal Analysis of Ultrasonic C-Scan Testing for Multi-layer Welding Structure
Beijing Institute Of Aeronautical Materials
BeijingChina
Shie, Nang-ChianNCShie@itri.org.twStudy of Ultrasonic Techniques on the inspection of NPP components
Industrial Technology Research Institute
TaiwanTaiwan, China
Shiroshita, Satorushiroshita_anken@hihakaikensa.co.jpA Study on Advanced Ultrasonic Measurement of Flaw Length
Non-Destructive Inspection Co.,Ltd.
OsakaJapan
Shkatov, Petrpetr_shkatov@mail.ruEddy Probe System on the Basis of New Technology Simulator for Education of Eddy Current Testing Specialists Adaptive Eddy Current Flaw Detectors
Moscow state university of instrument making and informatic
MoscowRussia
Shou, Binankqding@sina.comDigital Radiographic Imaging Inspection System on the Tube to Tube sheet Welding Joints of Heat Exchanger
China Special Equipment Inspection and Research Institute
BeijingChina
Shu, Ming-Hangshuminghang@163.comSimulation of Stress-magnetization Effect on 18CrNi4A Steel by ANSYS
Nanchang Hang Kong University,
Key Laboratory of Nondestructive Testing, Ministry of Education
NanchangChina
Shubochkin, Andrey E.spektr@co.ruComputerized Portable Eddy-Current Flaw Detectors
JSC, SPECTRUM-RII
MoscowRussia
Simm, Anthonyanthony.simm@ncl.ac.ukSimulation of magnetic field distribution of excitation coil for EM flow meter and its validation using magnetic camera
University of Newcastle,
School of Electrical, Electronic and Computer Engineering, Merz Court
Newcastle upon TyneUnited Kingdom
Simonetti, F.f.simonetti@imperial.ac.ukFeasibility Studey of Blockage Detection Inside Pipes Using Guided Ultrasonic Waves
Imperial College ,
UK Research Centre in Non-destructive Evaluation (RCNDE), Department of Mechanical Engineering
LondonUnited Kingdom
Simonin, Jourisimonin@ovgu.de,Electromagnetic Imaging using Probe Arrays Eddy Current Tools for Education and Innovation
University of Magdeburg
MagdeburgGermany
Singh, Krishna Kemt@sail-rdcis.comApplication of Portable Non-Destructive Testing Instruments to Enhance Performance of Hot Strip Mill Rolls.
Steel Authority of India,
R&D Centre
RanchiIndia
Siores, Eliases1@bolton.ac.ukBacterial Magnetic Particles for Applications in NDT&E, Detection of Flaws and Cracks in Sample Materials
University of Bolton,
Centre for Materials Research and Innovation
BoltonUnited Kingdom
Slesarev, Dmitrydslesarev@intron.ruPractice of Inline Pipeline Inspection with MDSCAN Intelligent Pigs
Intron Plus Ltd.
MoscowRussia
Smalley, Shaunjxj@phoenixisl.co.ukFretting Cracking Ultrasonic Detection in Generator Teeth
Phoenix Inspection Systems Ltd
WarringtonUnited Kingdom
Šmid, Radislavsmid@fel.cvut.czUltrasonic Signal De-noising Using Dual Filtering Algorithm
Czech Technical University,
Faculty of Electrical Engineering Department of Measurement
PragueCzech Republic
Smorodinsky, Yakovsm@imp.uran.ruMicrodefect Detection in High-Temperature Resistant Steel by Using Ultrasound Laser Interferometer Ultrasonic Pulse Signal Diffraction from Different Flaws in Elastic Media
Russian Academy of Sciences, RAS, Ural Branch ,
Institute of Metal Physics
EkaterinburgRussia
Soehnchen, Richardr.soehnchen@automationwr.deNo UV radiation in magnetic-powder inspection
Automation W+R GmbH
MünchenGermany
Song, Kaisongkainiat@tom.comSimulation of Stress-magnetization Effect on 18CrNi4A Steel by ANSYS
Nanchang Hang Kong University,
Key Laboratory of Nondestructive Testing, Ministry of Education
NanchangChina
Song, Sung Jin sjsong@skku.eduDevelopment of an Ultrasonic Ray Model for Phased Array Ultrasonic Testing in Austenitic Weldments
Sungkyunkwan University,
School of Mechanical Engineering
SuwonKorea
Song, Wen-aisongwenai@nuc.edu.cnSimulation of Scattering Acoustic Field in Rod and Identify of Ultrasonic Flaw Detecting Signal Mechanical Property Analysis with Ultrasonic Phased Array Phase Reversed Image Reconstruction Method of Industrial Ultrasonic CT
Tsinghua University,
Department of Mechanical Engineering
BeijingChina
Soua, SlimSlim.Soua@twi.co.ukModelling of guided ultrasonic wave in aircraft wiring
TWI Ltd
CambridgeUnited Kingdom
Spartiotis, Konstantinoskostas@ajat.fiA new fully digital system for RT inspection of metal tube to tube sheet joints of heat exchangers
Oy Ajat Ltd
EspooFinland
Srinang, Mantanamantana.sri@kmutt.ac.thStatus of the Thai Society for Nondestructive Testing and NDT in Thailand Acoustic Emission Transferability using Transfer Function
King Mongkut’s University of Technology Thonburi
BangkokThailand
Stanfield, Daviddbs@knotfree.co.ukA De-Convolution Technique used for NDT in X-ray & CT.
Image Enhancement Technology Ltd
UxbridgeUnited Kingdom
Štarman, Stanislavstarmans@email.czSeparation of Signals Acquired with EMAT in Dual Coil Configuration Automatic System for Crack Detection Using Infrared Thermographic Testing
Starmans Electronics
PragueCzech Republic
Stashkov, Alekseystashkov@imp.uran.ruFirmware System for diagnostics of the mill rolls
Russian Academy of Sciences, RAS, Ural Branch ,
Institute of metal physics Ural division
EkaterinburgRussia
Steel, Berniebsteel@oceaneering.comComputed Radiography deployed subsea by a Romotely Operated Vehicle
Oceaneering International Inspection
Aberdeen, ScotlandUnited Kingdom
Steigmann, Rozinasteigmann@phys-iasi.roEddy current and ultrasound data fusion applied to Carbon Fiber Reinforced Plastic evaluation Eddy current and ultrasound data fusion applied to Carbon Fiber Reinforced Plastic evaluation Electromagnetic sensors array for the determination of soil condition US spectroscopy applied to evaluation of some prosthesis made from syntherized zirconium oxides
National Institute of R&D for Technical Physics,
Nondestructive Testing Department
IasiRomania
Stetson, Jeffreyjeff.stetson@ge.comAdvancements in Pipeline Girth Weld Inspection
GE Inspection Technologies
Lewistown, PAUSA
Stifter, Daviddavid.stifter@uar.atAdvanced Optical Coherence Tomography techniques: novel and fast imaging tools for NDT
Upper Austrian Research GmbH
LinzAustria
Stocco, Danilodanilo.stocco@daimler.comComparison between in - line ultrasonic monitoring of the spot weld quality and conventional NDT methods applied in a real production environment
Mercedes-Benz do Brasil Ltda
Sao Bernardo do CampoBrazil
Su , Junsusocjunsu@163.comUltrasonic NDE of thin Composite plate Based on an enhanced Wigner-Ville distribution X-Ray Testing Sensitivity of Carbon Fiber Reinforced Aluminium Matrix Composite
Harbin Institute of Technology,
School of Materials Science and Engineering
HarbinChina
Sukhorukov, Dmitryinfo@intron.ruPractice of Inline Pipeline Inspection with MDSCAN Intelligent Pigs
Intron Plus Ltd.
MoscowRussia
Sun, Chao-Mingchm_sun@163.comRealization and application of simulation technology in Direct Radiography
China Academy of Engineering Physics, CAEP,
Institute of Machinery Manufacturing Technology
MianyangChina
Sun , Feng-RuiStudy on Relationship between Amplitudes of Reflection Signals and Positions of Magnetostrictive Transducer Study on Simulation of Guided Wave Propagation in Pipes
Naval University of Engineering,
College of Ship and Power
WuhanChina
Sun, Haiyansun@research.ge.comEddy Current Measurement of Case Hardened Depth of Steel Components
GE Global Research
Niskayuna NYUSA
Sun, Hui-Xiansunhuixian@nudt.edu.cnA Novel Approach for Nonlinear Distortion Correction of Industrial Endoscope Images 3D Magnetic Field Responses to a Defect Using a Tangential Driver-coil for Pulsed Eddy Current Testing Impedance Evaluation of a Probe-Coil's Lift-off and Tilt Effect in Eddy-Current Nondestructive Inspection by 3D Finite Element Modeling
National University of Defense Technology
ChangshaChina
Sun, Liangsnsys@163.comAnalysis of the Relationship between the Limit Load of Structure and the Microscopic Character
China Special Equipment Inspection and Research Institute
BeijingChina
Suzuki, Takanobutaka@probe-kgk.comNew Ultrasonic Guided Wave Testing using Remote Excitation of Trapped Energy Mode
KGK Co. Ltd.
KawasakiJapan
Swallow, Lee M.lms1ect@boton.ac.ukBacterial Magnetic Particles for Applications in NDT&E, Detection of Flaws and Cracks in Sample Materials
University of Bolton,
Centre for Materials Research and Innovation
BoltonUnited Kingdom
Sweetapple, ChristineSweetapple.CP@forces.gc.caAn Quantitative Evaluation of the Canadian Forces New Radiology Inspection Systems for the Detection of Water Ingress in CF188 Flight Control Surfaces
Aerospace and Telecommunication Engineering Support Squadron,
NDT Centre
AstraCanada
Swiderski, Waldemarwaldemar.swiderski@wp.plDetection of Defects  in Composite Pyrotechnic Materials and Products by IR NDT Methods
Military Institute of Armament Technology
ZielonkaPoland
Syasko, Vladimiroffice@constanta.ruOptimization of structure and operation algorithms for electromagnetic plated coatings thickness meters with the use of digital technologies
Constanta ltd
St-PetersburgRussia
Sysoev, Andrey M.spektr@co.ruLow Frequency Acoustic (Impedance) Flaw Detectors of the New Generation and Their Application
JSC, SPECTRUM-RII
MoscowRussia
Syuutei, Sasakibch14940@nifty.comInfluence of Inclusion on Crack Tip in Rotating Disc by Photoelasticity and Caustic Method The Basic Study of Safety Evaluation for Cylinder wall of Small output 2 Cycle Engine
Shibaura Institute of Technology,
Applied Dynamics laboratory
TokyoJapan
Tabachnik, Vera P.ges@imach.uran.ruA permanent magnet device for measuring the coersive force
Russian Academy of Sciences, RAS, Ural Branch ,
Institute of Engineering Science
EkaterinburgRussia
Tabakova, Bojanatabakova@tu-sofia.bgApplication of the methods for processing signals from ultrasonic surface waves during the study of induction-tempered materials
Technical University Sofia,
Faculty of Material Sciences
SofiaBulgaria
Tabary, Joachimjoachim.tabary@cea.frSimulation Studies of Radiographic Inspections with CIVA
Commissariat Energie Atomique (CEA-LETI)
GrenobleFrance
Tajvidi, Mehdimtajvidi@ut.ac.irComparing Sound Absorption Characteristic of Acoustic boards made of Aspen Particles and Different Percentage of Wheat and Barely Straws
Tehran University,
Wood and Paper Industry Faculty of Natural Resources
KarajIran
Takahashi, Masaki2D arrays and Volume Focusing combined inspection technique
KJTD Co. Ltd.
OsakaJapan
Takatsubo, Junji takatsubo.j@aist.go.jpThe Development of Laser Ultrasonic Visualization Equipment and its Application in Nondestructive Inspection Laser Ultrasonic Technique for Visualizing Ultrasonic Waves Propagating on 3-D Object
Advanced Industrial Science and Technology (AIST),
Research Institute of Instrumentation Frontier
TsukubaJapan
Takeuchi, Akitoshitakeuchi.akitoshi@kochi-tech.ac.jpObservation of Trapped Thin Oil Film Behavior between Ball and Disc with Using Ultrasonic Technique
Kochi University of Technology
KochiJapan
Tang, Ben-Guanggzkad@126.comMonitor the circumferential welds of Multi-layer Thick-wall Pressure Vessels Serving at Elevated Temperature by Ultrasonic Testing
Guangzhou Keanda NDT Co. Ltd.
GuangzhouChina
Tang, Brianbrian.tang@nrc-cnrc.gc.caAn Quantitative Evaluation of the Canadian Forces New Radiology Inspection Systems for the Detection of Water Ingress in CF188 Flight Control Surfaces
Department of National Defence Canada,
Atlantic, Air Vehicle Research Section,
Kingston, OntarioCanada
Tang, Guang-PingRealization and application of simulation technology in Direct Radiography
China Academy of Engineering Physics, CAEP,
Institute of Machinery Manufacturing Technology
MianyangChina
Tang, JihongNumerical Value Analysis of Eddy Current Probe Coil of Placement Model Based on ANSYS
Nanchang Hang Kong University,
Key Laboratory of Nondestructive Testing, Ministry of Education
NanchangChina
Tarasenko, G.A.Personnel Certification and Qualificatioin By the Independent Certification Body
SPEKTR-GROUP Association,
JSC ,MSIA, Spectrum
MoscowRussia
and: State and Tendencies of Development in Russia of Portable Non-Cooled IR-Imaging Systems for Search Tasks
JSC, SPECTRUM-RII
MoscowRussia
Tashiro, Kunihisatashiro@shinshu-u.ac.jpDetection of wire disconnection using new rope tester
Shinshu University,
Faculty of Engineering
NaganoJapan
Teng, Tsung-Jen tjteng@ncree.org.twIdentification of Source Time Function for Train-induced Vibration of Underground Tunnels
National Center for Research on Earthquake Engineering (NCREE)
TaipeiTaiwan, China
Teng, Yongpingypteng@bjtu.edu.cnApplication of full data acquisition technology in automatic ultrasonic inspection Application of network data transmission in ultrasonic automated testing system
Beijing Jiaotong University
BeijingChina
Terada, Seiichiterada-s@automax.co.jpObservation of Trapped Thin Oil Film Behavior between Ball and Disc with Using Ultrasonic Technique
Automax Co. Ltd.
TokyoJapan
Tezcan, Ugurugur.tezcan@ge.comRipple and Uniformity Measurement of a Phased-Array Testing-Machine for round-Bar Testing
GE Marmara Technology Center
IstanbulTurkey
Thapa, PrasadComputed Radiography with isotopes- Suitability for Weld Inspection
GE Global Research Center
BangaloreIndia
Thomas, Hans-Martinhans-martin.thomas@bam.deThe Important Role of Eddy Current Testing in Railway Track Maintenance
Federal Institute for Materials Research and Testing (BAM)
BerlinGermany
Thompson, Johnjohn.thompson@bindt.orgDEVELOPMENT and IMPLEMENTATION of a SPECIFICATION for AUTHORISED QUALIFYING BODIES
British Institute of Non-Destructive Testing,BINDT
NorthamptonUnited Kingdom
Tian, Gui Yung.y.tian@ncl.ac.ukA Radio-frequency Measurement System for Metallic Object Detection Using Pulse Modulation Excitation Simulation of magnetic field distribution of excitation coil for EM flow meter and its validation using magnetic camera Metal Magnetic Memory Testing Technique for Stress Measurement Stress Measurement Using Magnetic Barkhausen Noise and Metal Magnetic Memory Testing New Techniques for the Quantification of Defects Through Pulsed Magnetic Flux Leakage Magnetic Field Mapping for Complex Geometry Defect - 3D Transient Problem Research on Surface Defect Detection Using Pusled Eddy Current Testing Technology Feature Extraction and Optimisation for X-ray Weld Image Classification
University of Newcastle,
School of Electrical, Electronic and Computer Engineering, Merz Court
Newcastle upon TyneUnited Kingdom
Tian, HongtaoExperimental investigation on porosity of carbon fiber-reinforced composite using ultrasonic attenuation coefficient
Dalian University of Technology,
School of Materials Science & Engineering, NDT & E Laboratory
DalianChina
Tian, JianxinTOFD-Scan Imaging Based on Synthetic Aperture Focusing Technique
Wuhan Zhongke Innovation Technology Company Limited
WuhanChina
Tian, Wugangtwg_1978@163.comData Fusion for Combining Techniques to in Situ Detect Defects of Turbine Blade Borescope and Eddy Current Dual Probe for in Situ Detecting Cracks in an Aeroengine Labyrinth Disc
National University of Defense Technology,
College of Mechatronics Engineering and Automation
ChangshaChina
Tian, YongICM@caep.ac.cnTesting of Temperature Field of Explosives in the Cast Process by Infrared Imaging Testing Application of Scanning Acoustic Microscope for Adhesive Characteristics of Explosive-Aluminum-Alloy Interface Process Monitoring of Cast Explosive Solidification Molding by on-line Multichannel Ultrasonic Measurement
China Academy of Engineering Physics, CAEP,
Institute of Chemical Materials
MianyangChina
Tikhonov, Dmitry dtikh@echoplus.ruUltrasonic Transducers Calibration System with 3D Processing AUGUR 5.4 Acoustical Holography Implementation for Defected Rails Inspection
Scientific and Production Center, SPC ECHO+
MoscowRussia
Toda, Sosotoda@automax.co.jpObservation of Trapped Thin Oil Film Behavior between Ball and Disc with Using Ultrasonic Technique
Automax Co. Ltd.
TokyoJapan
Tong, Guanjunguanjun.tong@gmail.comAE Intelligent Sensor Networks System Used in Tele-Monitoring of Civil Engineering
Chinese Academy of Sciences,
Shanghai Institute of Technical Physics
ShanghaiChina
Tong, Jian-Huajhtong@sunrise.hk.edu.twThe Numerical Investigation into the Influence of the Scattering Effect from the Aggregates of Concrete on the Transient-elastic-wave-based NDT Technologies A Modified Synthetic Aperture Focusing Technique (SAFT) by the Hilbert-Huang Transform (HHT)
Hungkuang University,
Department of Computer Science and Information Engineering
Shalu Township, TaichungTaiwan, China
Tosti, Elenaelena.tosti@aviogroup.comDigital Camera Application in X-ray Real Time Control of European Launcher's Ariane 5 Booster Segments.
AVIO Propulsione AeroSpaziale
ColleferroItaly
Toullelan, Gwénaëlgwenael.toullelan@cea.frInspection of Complex Geometries Using Flexible Phased-Array Transducers
Commissariat Energie Atomique (CEA),
LIST
SaclayFrance
Tozawa, YousukeRelation between Magnetism and Charpy Impact Properties in Thermally Aged Fe-Cu Model Alloys
Iwate University,
NDE & Science Research Center, Faculty of Engineering
MoriokaJapan
Trelinski, MichaelMike.trelinski@opg.comInspection of CANDU reactor pressure tubes using ultrasonics Selected CANDU pressure tube degradation mechanisms and inspection related issues
Ontario Power Generation,
Inspection & Maintenance Services
TorontoCanada
Tsujisawa, Takahikot-taka@ashitech.ac.jpAn Iterative Phase Difference Detection Method for High Sensitivity Eddy Current Sensor
Ashikaga Institute of Technology,
Department of Mechanical Engineering
AshikagaJapan
Tsutomu, Ezumiezumi@sic.shibaura-it.ac.jpInfluence of Inclusion on Crack Tip in Rotating Disc by Photoelasticity and Caustic Method The Basic Study of Safety Evaluation for Cylinder wall of Small output 2 Cycle Engine
Shibaura Institute of Technology,
Department of Mechanical Engineering
TokyoJapan
Tu , MingwuIn Situ Inspection with Ultrasonic Creeping Wave for Rabbet of Turbine Blade
First Aeronautic Institute of Air Force
XinyangChina
Tui, Chen GuanTUI_Chen_Guan@starnet.gov.sgThermographic Evaluation of Aircraft Composite Materials Real-time Radiographic Non-destructive Inspection for Aircraft Maintenance
Republic of Singapore Air Force
SingaporeSingapore
Tuncel, Sabrisabri.tuncel@mam.gov.trDetermination of Relation Between Elastic Constant and Sintered Temperature in WC-Ni Composites
TÜBITAK Marmara Research Center
Gebze / KocaeliTurkey
Turnbow, Michael L.mlturnbow@tva.govPerformance Based Qualification for NDT
Tennessee Valley Authority
Soddy DaisyUSA
Uran, Miromiro.uran@i-var.siInfluence of lack-of-fusion defects on load capacity of MAG welded joints