NDTnet main Programme - Survey
	COPENHAGEN 26-29 MAY 1998	Proceedings online
	7th European Conference on Non-destructive Testing Professional Program
	Sorted by |Sessions|     |Posters|    Sorted by Subjects           English   |German|   |French|

Graphic  1. by Subjects and  2. by Countries

Acoustic Emission Aerospace Art and Architecture Automotive Certification/Qualification, Personnel Chemical, Petrochemical Industry Civil Engineering Computer Simulation Electromagnetic Methods General Infrared Methods Materials Characterization NDT of Welds Nuclear Industry Offshore Industry Pipeline Inspection Power Stations Radiation Safety Radiography Railway Reliability and Validation Ships Special Posters Steel Industry Surface Methods Ultrasonic Examination

Session: Acoustic Emission			top
Session 1 Chairman: Emilio Romero, Spanish NDT Society, AEND, Spain.			M a y
14:00	Introduction: Chairman		26
14:10	P. Tscheliesnig - TÜV, Austria.	New Inspection Method of Stream Drums in Paper Mills.	26
14:30	A.A. Anastassopoulos, S.J. Vahaviolos - Envirocoustics, Greece. J.C. Lenain - Euro Physical Acoustics, France.	Signature Recognition of Acoustic Emission from FRP Structures.	26
14:50	D. Tsamtsakis, M. Wevers, P. de Meester* - Katholieke Universiteit Leuven, Belgium.	Acoustic Emission to Model the Fatigue Behaviour of Quasi-Isotropic Carbon-Epoxy Laminate Composites.	26
15:10	D. Cherfaoui, C. Herve - CETIM, France.	Acoustic Emission in Pressure Vessels.	26
Posters: Acoustic Emission
P	P. Mazal, J. Dvoracek, D. Kolar - Inst. of Design, TU Brno, Czech Republic.	Determination of contact Fatique Properties Using Acoustic Emission Technique.
P	F. Cattaneo, C. De Michelis - CISE. G.M. Piana, S. Ghia - ENEL. Italy.	AEBIL: A New Acoustic Emission System for On-line Structural Integrety Monitoring of Critical Plant Components.
P	F. Cattaneo, C. De Michelis - CISE. R. Crudeli, G.M. Piana - ENEL. Italy.	Results of Long-term On-line Structural Integrity Surveillance of H.T./H.P. Steam Headers by an Innovative Acoustic Emission Approach.
P	E. Pereverzev, D. Borshchevskaiy, T. Tremba - National Academy of Sciences, Ukraine.	Estimation of Quality of Composit Materials by Acoustic Emission Method.
Sessions: Aerospace			top
Session 1 - Introduction and Laser/Optical Ultrasonics Chairman: Gustav Tober, Daimler-Benz Aerospace Airbus, Germany
08:30	Introduction: Chairman		27
08:40	H.-J. Schmidt, B. Schmidt-Brandecker, G. Tober, Daimler-Benz Aerospace Airbus, Germany.*	Design of Modern Aircraft Structure and the Role of NDT.*	27
09:20	J.-P. Monchalin, C. Néron a.o. - National Research Council. P. Bouchard, R. Héon a.o. - Ultra-Optec. Canada.*	Laser-Ultrasonics for Inspection and Characterization of Aeronautic Materials.	27
09:40	O. Petillon, J.P. Dupuis - Aerospatiale. H. Voillaume, H. Tretout - Dassault Aviation, France.	Applications of Laser Based Ultrasonics for Aerospace Industry.	27
Session 2 - Inspection of Aerospace Components/Structures with Eddy Current and SQUID-Sensors
10:40	M. Junger - Rohmann, Germany.	Eddy-Current Tests on Airplanes Using SQUID-Technology - A Step into a New Dimension of NDT.*	27
11:00	M.v. Kreutzbruck, U. Baby, M. Mück, C. Heiden - Uni. of Giessen, Germany.	Detection of Deep Lying Cracks by Eddy Current SQUID NDE.	27
11:20	G. Scheer - Test Maschinen Technik. Th. Meier, D. Schiller - Daimler-Benz Aerospace Airbus. Germany.	Analysis of Multifrequency Eddy Current Signals from Fatigue Cracks in Typical Aircraft Structures.	27
11:40	F. Lingvall, T. Stepinski - Uppsala Uni., Sweden.	Automatic Detection of Defects in Riveted Lapjoints using Eddy Current.	27
12:00	W.D. Feist - Daimler-Benz Aerospace. G.-R. Tillack - BAM. Germany.	Determination of the POD for High Resolution Eddy Current Inspection on Turbine Disks.	27
Session 3 - Ultrasonic Inspection of Aerospace Components out of Metal and Composites
14:00	C. Vanhille, C. Valdecantos - TECAL, Spain.	High Speed Ultrasonic Inspection of Composite Parts.	27
14:20	G. Fischer - Otto Fuchs Metallwerke. W. Hansen - Krautkrämer. Germany.	Ultrasonic Inspection of Aircraft Engine Components.	27
14:40	W. Hillger - DLR Braunschweig, Germany.	Ultrasonic Imaging of Defects in Sandwich Composites.	27
15:00	L. Winter - Daimler-Benz Aerospace Dornier, Germany.	Ultrasonic Inspection of Ceramic Matrix Composite Materials (CMC).	27
Session 4 - Ultrasonic Inspection of Aerospace Components out of Metal and Composites, continued
16:00	Y. Bar-Cohen - Jet Propulsion Lab. A.K. Mal, Zensheu Chang - UCLA. USA.*	Characterization of Defects in Composite Materials Using Rapidly Acquired Leaky Lamb Wave Dispersion Data.	27
16:20	N. Guo, B.S. Wong - Nanyang Technological Uni., Singapore. K.S. Tan - Uni. Brunei Darussalam, Brunei.	Determination of the Depth of Delamination in Composites Using Lamb Waves.	27
16:40	J. Pohl - Uni. of Magdeburg, Germany.	Ultrasonic Inspection of Adaptive CFRP-Structures.	27
17:00	N. Birioukova - Baumann Moscow State Tehcn. Uni., Russia.	Instant Quality Control of Joint of Multylayer, Including Honeycomb Structures, by Acoustic Topographical Method.	27
17:20	U. Kehlenbeck - Daimler-Benz Aerospace Airbus, Germany. V. Vengrinovich, Y. Denkevich, V. Tsukerman - Acad. of Sciences, Belarus.*	On-board Aircraft Weighing System using Barkhausen Noise Sensors.	27
Session 5 - Thermal Wave Imaging of Aerospace Structures Chairman: Gustav Tober, Daimler-Benz Aerospace Airbus, Germany
08:30	Introduction: Chairman		28
08:40	R.L. Thomas, X. Han, L.D. Farro - Wayne State Uni., USA.	Thermal Wave Imaging of Aircraft for Evaluation of Disbonding and Corrosion.	28
09:00	D. Wu, A. Salerno, G. Busse - Uni. of Stuttgart, Germany.	Lockin-Thermography for Non-destructive Evaluation of Aerospace Structures.	28
09:20	Y. Tavrin, J.H. Hinken - F.I.T. Messtechnik, Germany.	First Routine Aircraft NDT with SQUID Gradiometer.	28
09:40	S. Abbé, P. Honorat - SEP, France.	Inspection of C/C Extendible Nozzle Extension.	28
Session 6 - Optical Inspection Techniques for Aerospace Structures Session Leaders: J.H. Heida, Nat. Aerospace Lab. NLR, The Netherlands; Martin Junger, Rohmann GmbH, Germany
10:40	P. Delvo`, L.M. Rizzi - CISE, Italy.	Shearography for Defect Detection in Aeronautical Composites under Vibrational Loading.	28
11:00	M.-A. De Smet* - GIE NDT Expert. P. Méreau - Aerospatiale. France.	Shearographic Inspection of Repaired Aeronautic Composite Materials.	28
11:20	M. Honlet - Honlet Optical Systems. A. Ettemeyer - Dr. Ettemeyer. Germany. C. Bouju - EUROCOPTER France.	Automated Inspection of Helicopter Rotor Blades using Shearography.	28
11:40	S. Abbé, P. Honorat - SEP, France.	Comparison between Holographic Interferometry, ESPI and Shearography.	28
Session 7 - Optical Inspection Techniques for Aerospace Structures, continued Session Leaders: Rudolf Henrich, Daimler-Benz Aerospace Airbus, Germany; Gérard Mangenet, SNECMA, France
14:00	O. Petillon - Aerospatiale, France.	New Developments of Pulsed Holography for Industrial Applications.	28
14:20	J.H. Heida, A.J.A. Bruinsma - TNO Inst. of Applied Physics, The Netherlands.	D-Sight Technique for Rapid Impact Damage Detection on Composite Aircraft Structures.	28
14:40	M. Antonakios, P. Rizo - CEA. P. Lamarque - SNPE. France.	Real Time Tomosynthesis System Applied to Solid Rocket Motor Examination.	28
15:00	M. Surgeon, M. Wevers - Dept. of Metallurgy and Materials Eng. (Kuleuven), Belgium.	Quantifying the Damage State of a Quasi-Isotropic CFRP with Embedded Optical Fibres During Fatigue Testing Using Acoustic Emission and Microfocus Radiography.	28
Session 8 - Inspection of Ageing Aircraft with different Techniques Session Leaders: S.J. Beverley, Royal Air Force, UK; Thomas Grybäck, CSM Materialteknik, Sweden
16:00	H. Tretout - Dassault Aviation, France.	Developments and Applications of NDT Techniques for the Aeronautical Industry through EC Founded Research Projects.	28
16:20	R. Capriotti, E. Dati, G. Trivisonno - Italian Air force DASRS, Italy.	Non-Destructive Testing of Ageing Military Aircraft.	28
16:40	W.J. Lewis, L.G.I. Bennett - Royal Military College of Canada.	Results Achieved Inspecting Composite Flight Control Surfaces Using Neutron Radiography.	28
17:00	Md. Mahi Uddin Khan - Biman Bangladesh Airlines, Bangladesh.	Non-destructive Testing Applications in Commercial Aircraft Maintenance.	28
17:20	D. Bansal - Indian Navy. C.R.L. Murthy - Indian Inst. of Science. India.	Non-Destructive Evaluation of Impact Damage in Composite Helicoper Blades Using Acoustic Impact Testing - A Study.	28
Session 9 - Miscellaneous (Training, Leak Test) Chairman: Gustav Tober, Daimler-Benz Aerospace Airbus, Germany
08:30	Introduction: Chairman		29
08:40	S.J. Beverley - Royal Air Force, UK.	NDT in the Royal Air Force.	29
09:00	V. Tikhii, V. Sitalo - Yuzhnoye State Design Office, Ukraine.	Leak Test of Rocket Fuel Systems.	29
09:20	D. Bical - Airbus Industrie, France.	New Fuel Leak Detection Using Helium Gas.	29
09:40	R. Henrich, G. Tober - Daimler-Benz Aerospace Airbus, Germany.	Qualification and Certification of Inspection Personnel in the European Aerospace Industry.	29
Posters: Aerospace
P	I. Prassianakis - National Technical Uni. of Athens, Greece.	Non-destructive Testing of Adhesively Bonded Materials.
P	G. Mook, J. Pohl, P. Veit - Uni. of Magdeburg, Germany.	Non-destructive Evaluation of Adaptive Material Systems.
P	A. Maurer, G. Finger - NUKEM, Germany.	How is the PC Changing an NDT Test System?
P	V.M. Zykov, A.N. Kiselyov - Introscopy, Russia.	Testing of Impurity Atoms State in Single-Crystal Si.
P	A.S. Wojtas - Stresstech, The Netherlands. L. Suominen, B.A. Shaw - Uni. of Newcastle, UK. J.T. Evans - Stresstech, Finland.	Detection of Thermal Damage in Steel Components After Grinding Using the Magnetic Barkhausen Noise Method.*
P	A.N. Kozin, L.D. Dobrushin - E.O. Paton Electric Welding Inst., Ukraine.	Acoustic Microscopy Studies of the Exposure Welding Fusion Zone.
P	H.-J. Krause, R. Hohmann, M. Grüneklee, M. Maus a.o. - Forschungszentrum Jülich, Germany.	Aircraft Wheel and Fuselage Testing with Eddy Current and SQUID.
P	O. Köser, G. Mook - Otto-von Guericke-Uni.. W.D. Feist, L. Steinhauser. Germany.	Determination of POD Versus Crack Size Based on the ROC-Method for Eddy Current Inspection.
P	F. Thollon, F. Clauzon - CEGELY, France.	Flaw Characterization in Metallic Assemblies with Pulsed Eddy Current NDT.
P	H. Tretout - Dassault Aviation, France.	Review of Advanced Ultrasonic Techniques for Aerospace Structures.
P	V.Ya. Maklashevsky, V. N. Filinov, M.V. Filinov - MSIA Spectrum, Russia.	Digital Processing of Roentgenographic and X-Ray Television Images in Aerospace Radiographic Testing.
P	A.A. Ketkovich, V.V. Kliouev, M.V. Filinov - MSIA Spectrum, Russia.	PC-Based Videoendoscopic System DX 2 for the Inspection of Internal Surfaces of Pipes.
P	S.J. Beverley - Royal Air Force. K. Taylor - British Aerospace. UK.	NIMROD 2000 - Practical Application of Large Area Scanning Systems.
P	M. Balaskó - Atomic Energy Research Inst. G. Endröczi - Research Inst. Particle and Nuclear Physics. G. Makai, I. Járkás Inst. of Aero. Eng. Hungary.*	Study of Complex Composite-Metal Structure with Dynamic Neutron Radiography and Vibration Diagnostics.
P	T. Stepinski - Uppsala Uni.. B. Vagnhammar - IAR Systems. Sweden	Automatic Detecting Disbonds in Layered Structures using Ultrasonic Pulse-echo Inspection.
P	G.A. Morozov, R.E. Shalin, G.P. Mashinskaya - VIAM, Russia.	Intellectual Materials in High Loaded Machinery Build-In Non-Destructive Control Systems.
P	A.K. Denel, G.A. Morozov, V.K. Yurenkov - VIAM, Russia.	Magnetic Power and Infrared Methods of Isorientated Defects.
P	B. van den Bos - CSM Materialteknik, Sweden.	Development Projects Focused on Aerospace.
P	W. Bischoff, H.-A. Crostack, M. Maass - Uni. of Dortmund. Th. Meier, G. Tober - Daimler-Benz Aerospace Airbus.*	CS-Pulsed Eddy Current Inspection for Cracks in Multi-Layered Joint A1-Alloy Aircraft.
P	J. Sell, J.C. Lenain, J. Meyer, H. Karl - Euro Physical Acoustics and MAN Technologie. Germany.*	Acoustic Emission Testing of ARIANE 5 Composite High Pressure Vessels.
P	-	NDT of Pressurised Vessels - An Aid to Enhanced Reliability of Defect Detection.
Sessions: Art and Architecture			top
Session 1 Chairman: C. Parisi, AIPnD, Italy
10:40	Introduction: Chairman		28
10:50	J.L. Boutaine - Laboratoire de Recherche des Musées de France, France.	Radiography Applied to Non Destructive Examination of Cultural Objects.	28
11:10	S. Lorusso, M. Troili a.o. - Uni. of Tuscia. M. Marabelli - Inst. Centrale del Testauro. R. Mazzeo - Museo Civico Archeologico Bologna. Italy.	Diagnostic Evaluation of the "Conversation State" of S. Maria del Cerreto Church in Capranica (Viterbo-Italy).	28
11:30	M.A. Alonso - CSIC. M. Arroyo, V. Gil, E. Martínez de Salinas - TECAL. G. Delojo - INTA. Spain. *	A Radiographic Study of Insect Attacks in Woods.	28
11:50	M. Rossi - Uni. of Bologna, Italy.	High Resolution 3D Computed Tomography of Small Archeological Sculptures.	28
Session 2
14:00	B. Lavayssiére, N. Lacoudre - EDF, France.	Application of Radiography for the Conservation and Restoration of Archaeological Objects.	28
14:20	E. Rosina - Politechnico di Milano.L. Rosi, - Siciltest. L. Gerosa - ISMES. Italy.	Thermography and Georadar to Identify Moisture in Ancient Walls.	28
14:40	P.M. Boone, University Gent, Belgium.	Diagnostic of Cultural Heritage by Holographic Interferometry.	28
15:00	End of sessions.	Excursion at the laboratories of Dept. of Censervation of the Danish National Museum.	28
Posters: Art and Architecture
P	B. Gottlieb - The Danish National Museum, Denmark.	NDT of Bronze Lurs.
Session: Automotive			top
Session 1 Chairman: Emilio González, TECHNATOM, Spain
14:00	Introduction: Chairman		26
14:10	A. Koenig, CEA-LETI. A. Gliere, R. Sauze, P. Rizo - CEA. France.	Radiograph Simulation to Enhance Defect Detection and Characterization.	26
14:30	A. Tanarro, F.J. Fernandez - TECHNATOM, Spain.*	Application of Automated Ultrasonic Inspection System to Industrial Processes.	26
14:50	M. Halter, B. Lutz - Institut Dr. Förster, Germany.	Integration of Eddy-Current-Testing into Networked Automatic Manufacturing Systems.	26
15:10	W. Gebhardt - IZFP, Germany.	Ultrasonic Measurement of the Exhaust Gas Mass Flow and Temperature with High Temporal Resolution.	26
Posters: Automotive
P	A. Chernyshev - National Academy of Sciences, Belarus.	Testing of Deformation Intensity, Hardened Layer Depth by Higher Harmonic Method.
P	N. Gusak, A. Osipov - National Academy of Sciences, Belarus.	Testing of Sheet Materials' Punchability under Limiting Deformation Diagram by Higher Harmonics Method.
P	S. Lopresti - FIAT AUTO. D. Axinte - Politechn. di Torino. Italy.*	US Inspection Application of "SWR" Nugget's in Automotive Industry.
P	E. Schneider - IZFP, Germany.	Ultrasonic Characterization of State and Properties of Al Structures.
P	G. Schröder, F. Pauly, D. Grunwald - Forschungszentrum Jülich, Germany. J.d.C. Payao Filho - Federal Uni. of Rio de Janeiro, Brazil.	Helium Leak Test at 950 °C.
P	Ola Jensrud - Raufoss Technology, Norway.	The Industrial Material and Process Development for High Performance Parts - Current Challenges.
Session 1 Chairman: Michael Farley, Mitsui Babcock, UK
14:00	Introduction: Chairman		28
14:10	R. Roche - COFREND, France.	The History of the Certification of NDT Personnel in Europe.	28
14:30	J. Thompson - British Inst. of NDT, UK.	Five Years of Experience of EN45013, EN 473 and ISO9712.	28
14:50	U. Kaps, DGZfP, Germany.	Lacks and Gaps of EN 473.	28
15:10	D. Henning - Sector Cert, Germany.	Sense and Nonsense of Multisectoral Certification of NDT-Personnel.	28
Session 2
16:00	D. de Groot - SGS, The Netherlands.	Revision of EN 473: Practical Implications on Certification of NDT Personnel.	28
16:20	H. Hoogstraate, Röntgen Technische Dienst, The Netherlands.	EN 473/45013 Certificates are not the Ultimate Answer to Questions about Non-Destructive Testing.	28
16:40	C. Eriksson - ABB NDT Training Center, Sweden.	Why do We Need a National Certification System Like Nordtest when We Have the European Standard EN 473?	28
17:00	A.N. Kozin, V.A. Troitskij - E.O. Paton Electric Welding Inst., Ukraine.	Ukrainian NDT Personnel Certification System.	28
17:20	N.N. Volkova, A.V. Mullin - Testing and Diagnostics, Russia.	Harmonization of NDT Personnel Certification Schemes. Problems and Solutions.	28
Sessions: Certification/Qualification, Personnel			top
Session 3 Chairman: Michael Farley, Mitsui Babcock, UK
08:30	Introduction: Chairman		29
08:40	V. Levkovitch, S. Zinovjeva - CERTICO, Belarus.	Quality System of NDT Personnel Certification Body.	29
09:00	M.L. Turnbow - American Society for Nondestructive Testing, USA.	Progress in Introducing Central Certification in the USA.	29
09:20	S.J. Lavender - Lavender International NDT, UK.	The Role of Central Certification with a Company Written Practice.	29
Posters: Certification/Qualification, Personnel
P	S. Ullah - Bangladesh Atomic Energy Com., Bangladesh.	Training and Certification of NDT Personnel in Bangladesh.
P	F.R. Sosnine - MSIA Spectrum, Russia.	Comparative Analysis of Norms of Russia,, the USA and Europe on NDT Personnel Certification.
P	S.A. Jenkins - Current Enterprise, UK.	Training and Certification Using Eddy-Current Simulators on the Internet.
Sessions: Chemical, Petrochemical Industry			top
Session 1 Chairman: Andreas Hecht, BASF, Germany
08:30	Introduction: Chairman		27
08:40	H. Thiele - SGS F.H. Gottfeld, Germany.	NDT Methods for Surveillance of Plants in Chemical and Petrochemical Industry.	27
09:00	G. Coco, A. Marino - Procontrol, Italy.	Making NDT Predictive.	27
09:20	S.D. Miller, J. O'Brien, D.L. Keck - Saudi Aramco, Saudi Arabia. *	Implementation of Advanced NDT Technology Programs at Saudi Aramco.	27
09:40	P.J. van de Loo - Shell, The Netherlands. B. Herrmann - Dow, Germany.	How Reliable is Acoustic Emission (AE) Tank Testing? The Quantified Results of an AE Usergroup Correlation Study!	27
Session 2
10:40	A. Scheerder - DSM Engineering-Stamicarbon. The Netherlands.	Experiences at DSM with NDT and Evaluation of Creep Damages in Reformer Tubes.	27
11:00	C.V. Subramanian, A. Joseph, A.S. Ramesh, Baldev Raj - IGCAR, India.*	Wall Thickness Measurements of Tubes by Internal Rotary Inspection System (IRIS).	27
11:20	K. Quirk - Phoenix Inspection Systems, UK.	Applications for the Acoustic Ranger in Chemical and Petrochemical Industries.	27
11:40	M. Louw, J.C. Els - Anglo American Corp. of South Africa.*	Ozone Friendly Eddy Current Heat Exchanger Tube Testing on South African Gold Mines.	27
Session 3
14:00	J.T. Rheinländer, Denmark, The Consorttium of BE-95-1164 "RAYSQUINS".	Quantitative Real-Time Radioscopical Condition Monitoring at High Radiation-Energy.	27
14:20	A. Hecht - BASF. R. Bauer - Giessen Uni. F. Lindemeier - AMI. a.o. Germany.	On-Line Radiographic Wallthickness-Measurement of Insulated Piping in the Chemical and Petrochemical Industry.	27
14:40	M.B. Hoppenbrouwers* - Röntgen Technische Dienst, The Netherlands.	LORUS to Detect Hidden Corrosion.	27
15:00	F. Ravenscroft, R. Hill, C. Duffill, D. Buttle - AEA Technology, UK.*	CHIME - A new Ultrasonic Method for Rapid Screening of Pipe, Plate and Inaccessible Geometries.	27
Session 4
16:00	P.B. Mortensen, C. Christensen, C. Peyk - FORCE Inst., Denmark.	Controlling Ultrasonic-Inspection Intervals by Monitoring Hydrogen Permeation.	27
16:20	N. Trimborn, J. Verkooijen - AEA Sonomatics, The Netherlands.	Hot Hydrogen Attack: A Novel Approach for Reliable Detection and Monitoring.	27
16:40	H. Schneider - SKW, Germany.	Permeability Measurements on Carburized Components of Material Incoloy 800 H.	27
17:00	J. Vagn Hansen - FORCE Inst., Denmark.	Non-Destructive Metallography Used On-Site, Possibilites and Experiences.	27
17:20	T. Sevel, N.Hald Pedersen, S. Genders - FORCE Inst., Denmark.	Tracing of Oil, Gas, and Water in the Oil and Gas Industry with Isotope Techniques.	27
Posters: Chemical, Petrochemical Industry
P	J.-M. Carpreau - IS, France. G. Schauritsch, P. Tscheliesnig - TÜV, Austria. E. Eberhard - Butagaz, France.	Testing LPG-Tanks by Acoustic Emission.
P	P.E. Schlenker - SOS Engineering Software, USA.	Computerization of Inspection Programs in the Refining, Petrochemical and Power Industries.
P	J.N. Posypayko, V.A. Troitskij - E.O. Paton Electric Welding Inst., Ukraine.	Overall Diagnosis of Underground Metal Tanks with one-sided Access to the Shell.
P	J. Sommer - Krautkrämer, Germany.	The Possibilities of Mobile Hardness Testing - A User-related Hardness Testing Comparison of the Static UCI Method and the Dynamic Rebound Method.
P	J. Rusborg - FORCE Inst., Denmark. J. Schuhknecht - MIBRAG. G. Köppke - Babcock IKR. B. Herrmann - Dow. Germany.	Automated Ultrasonic Inspection of Adhesively Bounded GFRP-Pipejoints.
P	M.F. Ruiz Gale, J.A. Marengo, M.R. Landau, E.N. Hogert, N.G. Gaggioli, - ENDE, CAC, CNEA, Argentine. *	Digital Speckle Correlation for non-destructive Testing of Corrosion.
P	N.A. Burlaenko, L.M. Pogorila, O.V. Shulzhenko, V.G. Tikhiy - L.V. Pisarzhevski Inst. of Physical Chemistry, Ukraine.	Application of Piezo-Resonance Sensors in Tightness Control.
P	O.V. Shulzhenko, Yu.N. Posypayko, N.A. Burlaenko - L.V. Pisarzhevski Inst. of Physical Chemistry, Ukraine.	Tightness Control by Chemical Methods.
P	H. Hansen Rasmussen, H. Kristensen, L. Jeppesen - FORCE Inst., Denmark.	NDT and Heat Exchanger Tubes.
P	J Pitkänen, P. Särkiniemi, P. Kauppinen, H. Jeskanen - VTT Manufacturing Technology, Finland.	Ultrasonic Measurement of a Thermal Fatique Crack Field Manually and with a Simple Handscanner.
P	H.-J. Salzburger - IZFP, Germany.	Long Range Detection of Corrosion by Guided Shear Horizontal (SH-) Waves.
P	J. Verkooijen - AEA Sonomatic, The Netherlands*.	Practical Experiences in the Application of Advanced Ultrasonic Equipment to Decrease Downtime through Non-Intrusive True Condition Assessment.
P	J. Verkooijen - AEA Sonomatic, The Netherlands*.	The Importance of Reliable NDE Measurements in Plant Management Systems.
P	G. Samigullin, N. Achmadeev - UFA State Petroleum Technological Uni. E. Filimonov - Bashkirian Scientific-Research Inst. Russia.	The Computer Analysis of the State of the Plant of Petrochemical Factory.
P	N. Achmadeev, G. Samigullin - UFA State Petroleum Technological Uni. E. Filimonov - Bashkirian Scientific-Research Inst. Russia.	Use of Complex Method NDT at Realization to Technical Diagnostics.
P	N. Achmadeev, G. Samigullin - UFA State Petroleum Technological Uni. E. Filimonov - Bashkirian Scientific-Research Inst. Russia.	Software of NDT Devices with the Account of Country Standards.
P	E. Filimonov, B. Selsky - Bashkirian Scientific-Research Inst. A. Achmadeev - UFA State Petroleum Technological Uni. Russia.	The Prognosis of the Residual Resourse of Petrochemical Equipment.
P	S. Sazhin, O. Verjaskina - Nizhniy Novgorod State Techn. Uni., Russia.	Research of the Sensitivity of Leaktesting.
P	C.A. Farina, G. Felicioli a.o. - Donegani Anticorrosione. G. Faita - Uni. of Milan. D. Salva' a.o. - ANTEA. Italy.*	Inspections, NDT Softwares and Corrosion Monitoring in the Process Industries.
P	V.P. Lukonin, S.G. Sazhin - Nizhniy Novgorod State Technical Uni., Russia.	Dangerous Gas Leakages Lokalization by Microelectronic Sensor.
P	J. Vagn Hansen, A.H. Jensen - FORCE Inst. A. Helmer Nielsen, Novo Nordisk Eng. Denmark. *	Videoendoscopy for Visual Testing of Welds in Pharmaceutical Plants.
Sessions: Civil Engineering			top
Session 1 - Assessment of in Situ Concrete Chairman: J. Hjorth Jensen, The Great Belt Link, Denmark
14:00	Introduction: Chairman		27
14:10	R. Jansohn - Inst. für Massivbau. M. Schickert - MFPA. Germany.	Objective Interpretation of Ultrasonic Concrete Images.	27
14:30	V.G. Shevaldykin, V.N. Kozlov, A.A. Samokrutov - MSIA Spectrum, Russia.	Inspection of Concrete by Ultrasonic Pulse-Echo Tomograph with Dry Contact.	27
14:50	T. Nemec, J. Rant - Josef Stefan Inst. V. Apih - Nat. Build. and Civil Eng. Inst. Slovenia. M. Kaling - FUJI, Germany.	Monitoring of Moisture Transport in Building Materials by Neutron Radiography.	27
15:10	P. Shaw, J. Bergström - FORCE Institute*, Sweden.	In-Situ Testing of Reinforced Concrete Structures Using Stress Waves and High Frequency Ground Penetrating Radar.	27
Session 2 - Assessment of Civil Structures
16:00	J. Hjorth Jensen - The Great Belt Link, Denmark.	Quality Management System for the Great Belt Link.	27
16:20	M. Yokota - Shikoku Research Inst., Japan.	Corrosion Rate Measurements of Reinforcing Bars in Real Concrete Structures Using AC Impedance Method.	27
16:40	P. Shaw - FORCE Institute, Sweden.	A Practical Approach to Inspection of Concrete Structures using High Energy Radiography and other Advanced NDE-Methods.	27
17:00	B. Pavlakovic, M.J.S. Lowe, P. Cawley - Imperial College of Science, UK.	The Inspection of Tendons in Post-Tensioned Concrete Using Guided Ultrasonic Waves.	27
17:20	A. Bensalem, H. Ali-Ahmed, C.A. Fairfield, A. Sibbald - Napier Uni., UK.	Spectral Analysis of Flat Arches: A New NDT Tool.	27
Posters: Civil Engineering
P	G.N. Deshchenko, Inst. of Applied Physics, Belarus.	Step-Frequency Microwave Testing of Concrete Walls.
Sessions: Computer Simulation			top
Session 1 - Signal Processing Chairman: Valeri Vengrinovich, Academy of Science, Belarus
08:30	Introduction: Chairman		27
08:40	L. Ericsson - TSonic. M. Gustafsson - Uppsala Uni.. Sweden.	Perception and Entropy Inspired Ultrasonic Grain Noise Suppression, Using Noncoherent Detector Statistics.	27
09:00	R. Rosseau, D. Degreve - Laborelec, Belgium.	The Ultimate NDE Expert: Real Time Comparison.	27
09:20	P.P. van 't Veen, J. Jarmulak - TNO Inst. of Applied Physics, The Netherlands.	Automated Interpretation of Heterogeneous NDT Measurements.	27
09:40	T. Stepinski, L. Ericsson, M. Gustafsson - Uppsala Uni.. B. Vagnhammar - IAR Systems. Sweden.	Neural Network Based Classifier for Ultrasonic Resonance Spectra.	27
Session 2 - Tomography and Data Inversion Session Leader: N. Harfield, University of Surrey, UK.
10:40	V. Vengrinovich, Y. Denkevich - Academy of Sciences, Belarus. G.-R. Tillack - BAM, Germany.	Limited Projections and Views Bayesian 3D Reconstruction Using Gibbs Priors.	27
11:00	V.M. Artemiev, A.O. Naumov - Inst. of Applied Physics, Belarus. G.-R. Tillack -BAM, Germany.	Fundamental of the Theory for Adaptive Image Reconstruction in X-Ray Tomography.	27
11:20	V.A. Mikhnev - National Academy of Sciences, Belarus.	Microwave Frequency-Swept Reconstruction of Complicated Dielectric Profiles.	27
11:40	A. Puro, H. Aben - Inst. of Cybernetics, Estonia.	Tensor Field Tomography for Residual Stress Measurement in Glass Articles.	27
Session 3 - Computer Modelling Session Leader: G.-R. Tillack, BAM, Germany
14:00	S. Mastorchio - EDF, France. N. Harfield - Uni. of Surrey, UK.	Modelling of Eddy-Current Interaction with Cracks in the Thin-Skin Regime: Two Approaches.	27
14:20	R. Hannemann, R. Marklein, K.J. Langenberg - Uni. of Kassel, Germany.	Numerical Modeling of Elastic Wave Propagation in Inhomogeneous Anisotropic Media.	27
14:40	A. Boström - Chalmers* Uni. of Technology, Sweden.	UT Defect: A Model of Ultrasonic NDT of Cracks.	27
15:00	G. Krug - Technion, Israel Inst. of Technology*.V. Orjelik, R. Aharoni - IRT. Israel.	A Novel Method for Off-Line Defect Characterization and Sizing from Standard b-Scan Data.	27
15:20	Discussion		27
Session 4 - Pattern Recognition and Diagnosis Session Leader: A. Notea, Technion, Israel
16:00	M. Faur - CEA. P. Morisseau - Intercontrôle. L. Paradis - CEA. France.	Ultrasonic Data Inversion for Outer Surface Defects Characterization.	27
16:20	S. Darbane, R. Drai - Scientific Research Centre in Welding and NDT CSC, Algeria.	Weld Defects Recognition Using the DHT.	27
16:40	E. Nesvijski, T. Nesvijski - Federal Uni. of Santa Maria, Brazil.	Modelling for Fatigue and Fracture Prediction of Brittle and Elasto-Plastic Materials Using Acoustic Emission Techniques.	27
17:00	B.P. Strelkov - RDIPEA. I. Arzhaev - ENES. A.Kh. Vopilkin a.o. - Echo. Russia. S.E. Bougaenko a.o. - RINSC MAE. Russia.*	New Flaw Visualization NDE Tools as a Basis for Modern Strength Maintenance.	27
17:20	S.A. Nielsen, J.T. Rheinländer, K.K. Borum, H.E. Gundtoft - Risø National Laboratory, Denmark.	Three-Dimensional Ultrasonic Reflection Tomography of Cylindrical Shaped Specimens.	27
Posters: Computer Simulation
P	P. Hammersberg, M. Mångård - IKP Linköping Uni., Sweden.	Predicting Computerised Tomography System Performance.
P	M.V. Sinkov, A.I. Zakidalsky, A.A. Chapor, T.U. Sinkova, P.I. Stukalenko - Inst. of Data Recording Problems, Ukraine.*	Study and Choice of Method for Solving 3D Reconstruction Problem in Tomography.
P	A.S. Eriksson - ABB TRC. J. Mattsson - Defence Research Establishment. J. Niklasson - Chalmers Uni. of Technology. Sweden.	Modelling of Ultrasonic Crack Detection in Austenitic Welds.
P	R. Drai, F. Sellidj - Scientific Research Centre in Welding and NDT CSC, Algeria.	Signal Processing Algorithms in Mechanised Ultrasonic Testing.
P	R. Drai, F. Sellidj, N. Bentaleb - Scientific Research Centre in Welding and NDT CSC, Algeria.	B-Scan & X-Rays Images Segmentation Using Co-Occurrence Matrix.
P	V.A. Rudnitsky, S.V. Tsarik - National Academy of Sciences, Belarus. M.B. Bakirov - All-Russian Research Inst. for Nuclear Power, Russia.	The Computation of Polymeric Material's Viscoelastic Properties by Dynamic Indentation Method.
P	V.V. Koshovy, E.V. Krivin, I.M. Romanyshyn - Karpenko Physico-Mechanical Inst., Ukraine.	Ultrasonic Tomographic Non-Destructive Techniques for Materials Characterization.
P	M. v. Kreutzbruck, M. Mück, C. Heiden - Uni. of Giessen, Germany.	Simulations about Eddy Current Distributions and Crack Detection Algorithms for a SQUID Based NDE System.
P	A. Goncharsky - Fed. Agency for Governmental Communicatin, Russia.	On certain Inverse Problems of Synthesis and Control in Optics.*
Sessions: Electromagnetic Methods			top
Session 1 Chairman: H.-M. Thomas, BAM, Germany
14:00	D. Hocking . Hocking NDT, UK	Eddy Currents - A Brief History of Giants.*	26
14:10	E. de Ledinghen, Ph. Leleu* - Intercontrôle, France.	New Generation of Eddy Current Instruments.	26
14:30	V.E. Shaternikov, P. Shkatov - Moscow State Instrument Making and Informatics Academy, Russia.	Non-destructive Cracks and Corrosion Testing by Eddy Current Method.	26
14:50	M. Zergoug, S. Mebrek - Scientific Research Centre in Welding and NDT CSC. R. Chennou - SNVI. Algeria.	Building and Testing of Probes for Non Destructive Characterization by Eddy Current of Cementation Coating Steels.	26
15:10	L. Bär, G.M. Daalmans a.o. - Siemens, ZT MF1. E. Becker, H.-P. Lohmann a.o. - Siemens, KWU WM TW. M. Mück - Just Liebig Uni. Germany. *	SQID Eddy Current Technique Applying Conformable Eddy Current Probes.	26
Session 2
16:00	G. Schneibel - Rohmann, Germany.	The Continued Development of Eddy-Current Imaging Scanner Systems.	26
16:20	H. Ostermeyer - Test Maschinen Technik. D. Stegemann - Uni. Hannover. Germany. *	New Aspects for Remote Field Eddy Current Probe Development.	26
16:40	D. Hocking - Hocking NDT, UK.	Advances in Instrumentation for Remote Field Eddy Current Inspection.*	26
17:00	D. Prémel, N. Madaoui, O. Venard - LESIR. E. Savin - FRAMATOME. France.	An Eddy Current Imaging System for Reconstruction of Three-Dimensional Flaws.	26
17:20	H.M. Sadek - Law Engineering Industrial Services, USA.	Baseline Eddy Current Inspection Program. New Heat Exchange Tubes.	26
Posters: Electromagnetic Methods
P	V. Sukhorukov - Intron Plus, Russia.	Steel Wire Rope Inspection: New Instruments.
P	V.E. Shaternikov, P. Shkatov - Moscow State Instrument Making and Informatics Academy, Russia. N.Y. Averin - Intourbank, Russia.	Portable Eddy Current Non-Destructive Testing Instrument.
P	P. Shkatov, V.E. Shaternikov, D.N. Averin - Moscow State Instrument Making and Informatics Academy. V.V. Gusev - RAO. Russia.	Eddy Current Testing of Turbo Generators' Rotors.
P	M. Zergoug, F. Sellidj, S. Mebrek - Scientific Research Centre in Welding and NDT CSC. A. Hammouda, Uni. of Blida. Algeria.	Elaboration of a Physical Model by Eddy Current and Application in the Characterization of Long Defects in Hollow Cylindrical Products.
P	P.-Y. Joubert, D. Miller, D. Placko - LESIR. E. Savin - FRAMATOME. France.	New Eddy Current Probe and Associated Preprocessing for 3D Image Reconstruction in Non Ferromagnetic Tube Testing.
P	R. Mallwitz, W.-J. Becker, K. Röll - Uni. of Kassel, Germany.*	Magnetic Field Sensors on 3D-Eddy-Current Testing.
P	R. Grimberg, A. Savin, E. Radu, O. Mihalache - Nat. Inst. of Research & Development for Tehcnical Physics, Romania.	Electromagnetic Evaluation of Material Discontinuities Shape and Severity.
P	P. Luukkonen, T. Ericsson - Linköping Uni. B. van den Bos - CSM Materialteknik. Sweden.	The Direct Current Potential Drop Method for Testing of Powder Metallurgical Parts.
P	C. Dybiec, S. Wlodarczyk, M. Dybiec - Inst. of Precision Mechanics, Poland.	Measurement of Own Stress Using the Eddy Current Method.
P	P. Gutkiewicz - IPPT-PAN, Poland.	Computer Based Eddy Current Testing.
Session: General			top
Session 1 Chairman: V.V. Kliouev, MSIA Spectrum, Russia
08:30	V.V. Kliouev, MSIA Spectrum, Russia	Non-Destructive Testing and Diagnostics of Safety.	29
08:40	D. Bakht - Titan Gas, Bangladesh.	NDT in Bangladesh: Institutional & Infrastructural Issues.	29
09:00	M. Mayos - EDF, France, for the Working Group TC138/AHG3J.	Standard Project for a Format Model for the Exchange of Multitechnique NDT Data.	29
09:20	H.Hartmann Pedersen - EC DGXII, Belgium.	European Research - Projects and Networking.	29
09:40	R. Schwemmle, EC III/D2, Belgium.	Pressure Equipment Directive. Principles and Requirements Related to Permanent Joining.	29
Posters: General
P	F.H. Dijkstra - Röntgen Technische Dienst, The Netherlands.	Necessary Evil or Benefit?
P	Z. Nikiforova - Belarussian Ass. on NDT. V. Koreshkov - Gosstandart. Belarus. D. Schnitger - DGZfP, Germany.	Comprehensive Approach to Quality in NDT.
P	I. Stabrovskaia, N. Kostoglod - CERTICO. Z. Nikiforova - Belarussian Ass. on NDT. Belarus.	Accreditation of NDT Laboratories.
P	I. Stabrovskaia - CERTICO. N. Kussakin - Gosstandart. Belarus.	Assurance of Impartiality in NDT through Attestation of the Procedures of Testing. *
P	S. Popoudina, Z. Nikiforova - Belarussian Ass. on NDT. N. Kussakin, Gosstandart. Belarus.	Metrological Maintenance of the Equipment for Non-Destructive Testing.*
P	V.A. Troitskij, B.E. Paton, Y.N. Posypayko - E.O. Paton Electric Welding Inst., Ukraine.	Non-destructive Testing in Ukraine.
Session: Infrared Methods			top
Session 1 Chairman: Thomas Lüthi, EMPA,Switzerland
16:00	Introduction: Chairman		26
16:10	L. Legrandjacques - FRAMATOME. J.-C. Krapez, F. Lepoutre, D. Balageas - ONERA. France.	Nothing but the Cracks: A New Kind of Photothermal Camera.	26
16:30	J. van Bezooijen - SGS, The Netherlands.	Infrared Thermography a Wide Versatile "NDT Tool".	26
16:50	V. Carl, E. Becker, A. Sperling - Siemens Power Generation Group, Germany.*	Thermography Inspection System for Gas Turbine Blades.	26
17:10	G. Cerini, C. de Petris, S. Iaccarino - ISPESL. S. Morra - IIS. Italy.*	Stress Measurement of a Vessel Using the Spate Technique.	26
Posters: Infrared Methods
P	M.S. Sukhanov, V.G. Torgunakov - Introscopy, Russia. *	Computer Model of Thermal Processes in a Cement Kiln for Application in IR Defectoscopy.*
Sessions: Materials Characterization			top
Session 1 - UT in Materials Characterization Chairman: Michael Kröning, IZFP, Germany
14:00	E. Schneider - IZFP, Germany.	Non-destructive Analysis of Stress States in Components using Micromagnetic and Ultrasonic Techniques - An Overview.	27
14:30	V. Garnier, G. Corneloup - MECASURF-LCND, France.	Characterisation by Rayleigh Waves of the Superficial Layers of Nitrided or Cemented Steels.*	27
14:50	W. Stark, J. Döring - BAM. V. Bovtun - Kiev Polytech. Inst., Ukraine. C. Kürten - Technical College Iserlohn. Germany. *	Monitoring of Curing Reaction of Polycondensating Thermosets at Press and Injection Moulding.*	27
15:10	M. Wevers, O. Leroy, P. de Meester* - Katholieke Universiteit Leuven, Belgium.	The Acousto-Optic Technique to Evaluate Hardness Profiles and the Relation to the Microstructure.	27
Session 2 - Electromagnetic Characterization of Materials
16:00	D. Buttle - AEA Technology, UK.	Rapid Nondestructive Stress Measurement with the MAPS System.	27
16:20	V. Vengrinovich, A. Vishnevsky, V. Tsukerman - Academy of Sciences, Belarus.	Ferromagnetic Materials Characterisation Using Directional Diagrams (DD) of Barkhausen Noise (BN).	27
16:40	G. Antonelli, M. Ruzzier - CISE. F. Cernuschi - ENEL. Italy.	A Calibration-free Electromagnetic Technique for NDT of Metallic Coatings.	27
17:00	A.A. Doubov, "Energodiagnostika", Russia.	Study of Metal Properties Using Metal Magnetic Memory Method.	27
Session 3 - X-Ray Testing in Materials Characterization Chairman: Michael Kröning, IZFP, Germany
08:30	C.O. Ruud - Pennsylvania State Uni., USA.	In-Process Non-destructive Characterization of Thin Film by X-Ray Diffraction.	28
09:00	E. Guldager - Danfoss, Denmark.	Residual Stress Measurements - The Danfoss Scenario.	28
09:20	M.P. Hentschel, D. Ekenhorst, K.-W. Harbich, A. Lange, J.V. Schors - BAM, Germany.	X-Ray Topography for Non-destructive Characterization of Materials.	28
09:40	F. Paglietti - EARTH. P. Plescia - National Council of Research. Italy.	The Application of SEXI, A New Portable Spectrometer for X-Ray Diffraction and X-Ray Fluorescence Analysis in Real Time for Non Destructive Testing of Materials.	28
Session 4 - Special Techniques for Materials Characterization
10:40	K.K. Borum, H.E. Gundtoft, J.T. Rheinländer, S.A. Nielsen a.o. - Risø National Laboratory, Denmark.	Non-Destuctive Evaluation of Ceramics used for Solid Oxide Fuel Cells.	28
11:00	E. Grinzato, P.G. Bison - CNR-ITEF. C. Guida - ABB Ricerca. Italy.	Non-Destructive Evaluation on Electrical Insulators of Composite Material by Thermal Effusivity.	28
11:20	B. Wolter, G. Dobmann, H.-R. Herzer - IZFP. U. Laub - Quality Management. Germany. P.J.C. Bloem - KEMA, The Netherlands.	One-Sided Access NMR for Concrete Inspection.	28
Posters: Materials Characterization
P	M.-H. Nadal, C. Hermerel, C. Gondard - CEA, France.	Material Characterization at High Temperatures: Contact and Non Contact Ultrasonic Methods.
P	M. Mihovski, A. Popov, Y. Ivanova, A. Partalin - Bulgarian Academy of Sciences, Bulgaria.*	Estimation of the Grain-size Distribution in the Carbon Steels using the Ultrasonic and Magnetic Barkhausen Methods.
P	E.S. Gorkunov, V.G. Kuleev - Inst. of Engineering Science, Russia.	The Effect of Stresses on the Coercive Force of Steels.
P	V. Vladimirov, D. Dimitrov, B. Mavroudchiev - Sofia Uni., Bulgaria.	NDT Characterisation of Pacific Ocean Floor Rocks.
P	J.A. Volchenko - Introscopy, Russia.	Proximate Absorption Neutron Moisture Meters for Samples of Nonorganic Materials.
P	J. Döring, W. Stark - BAM. G. Splitt - Krautkrämer. Germany.	On-line Process Monitoring of Thermosets by Ultrasonic Methods.
P	V.G. Gorbash, S.G. Sandomirskii, M.N. Delendick, E.G. Sandomirskaya - National Academy of Sciences, Belarus.	Analytical Expression for a Limiting Hysteresis Loop of Ferromagnetic Body.
P	S.G. Sandomirskii - National Academy of Sciences, Belarus.	Magnetic Testing of Physical and Mechanical Properties of Products from Ferromagnetic Materials Magnetized in Open Magnetic Circuit.
P	A.V. Rabtchevich, V.A. Rudnitsky - National Academy of Sciences, Belarus.	Determination of Yield Stress of Steels by Computing the Indentation Curve.
P	M. Surgeon, M. Wevers - Dept. of Metallurgy and Materials Eng. (Kuleuven), Belgium.	Using Optical Fibre Technology to Develop a Damage Detection Sensor for Composite Materials: Preliminary Research.
P	P. Petculescu - OVIDIUS Uni. R. Ciocan - Inst. of Nuclear Research. V. Bokas - TBA Logitras. Romania.	Investigation of the Austenitic Structures by Ultrasonic Spectral Analysis.
P	S.M. Aizikovich, L.I. Krenev, N.A. Serova - Mechanics and Appl. Mathematics Inst., Russia.	non-destructive Determination of Mechanical Properties of Non-Homogeneous Coatings.
P	N.I. Obodan, V.J. Adlucky, I.V. Obodan - Dnepropetrovsk State Uni., Ukraine.	Determination of Material Diagram Parameters as a Problem of Identification and Measurements Control during Indentor Penetration.
P	V. Vladimirov - Sofia Uni., Bulgaria.	Interpolation Method for Debye Temperature NDT Determination.
P	P. Molnár - Metalelektro. G. Posgay - L. Kossuth Uni., Hungary.	Barkhausen Noise Measurement in the Criminology.
P	M. Balaskó - Atomic Energy Research Inst. E. Sváb, G. Endröczi, A. Péter, I. Szikra. Hungary.	Radiography Investigations Combined with Vibration Diagnostics and Acoustic Emission in the Development of Refrigerators.
P	U. Laub - Q Net Quality Management. I. Altpeter - IZFP. Germany.	Cast Iron Inspection by Means of Micromagnetic Procedures.
P	S.E. Kruger, J. Charlier - Universite Libre de Bruxelles, Belgium. J.M.A. Rebello, Federal Uni. of Rio de Janeiro, Brazil.	Ultrasonic Backscattering Formulation Applied to Cast Iron Characterization.
P	U.-D. Hünicke, L. Lindecke, G. Schulz, W. Kowalski - Uni. of Rostock, Germany.	Materials Characterization by Active and Passive Ultrasonic Methods.
P	H.-D. Tietz, M. Dietz, L. Bühling, B. May - Westsächsische Hochschule Zwickau, Germany.	Non-Destructive Testing of Green Ceramic Materials.
P	R. Cesareo - Uni. of Sassari. A. Castellano - Dop. Scienza dei Materiali. M. Marabelli - Ist. Centrale del Restauro. Italy.	A Portable Apparatus for EDXRF-Analysis of S and CL.
P	L.M. Lobanov, V.A. Pivtorak, G.V. Cherkashin, O.M. Oliynyk. - E.O. Paton Electric Welding Inst., Ukraine.	Holographic Nondestructive Testing of Welded Structures.
P	T. Piech - Techn. Uni. of Szczecin. K. Gawdzinska, Maritime Uni. of Szczecin, Poland.	A New Non-Destructive Method for Estimation of Poisson's Ratio.
P	Z. Bolanca, N. Barisic, T. Bolanca - Uni. of Zagreb, Croatia.	Dielectric Characteristics of the System Aluminium/Oxide Layer/Electrolyte.
P	Z. Pawlowski - Military Inst. of Armament Technology, Poland.	Life prediction and Tracking Fatigue Degradation Using Ultrasonics.
P	J. Grum, B. Pecnik, P. Zerovnik - Faculty of Mech. Eng. D. Fefer - Faculty of Elec. Eng., Slovenia.	Analysis of Low-Carbon Steel after Cold Deformation Based on Barkhausen Noise.
P	A. Stulov - Inst. of Cybernetics, Estonia.	The Method of the Piano Hammers' Hereditary Parameters Determination.
Sessions: NDT of Welds			top
Session 1 - Radiography of Welds Chairman: Peter Mudge, TWI, UK
08:30	Introduction: Chairman		27
08:40	M.B. Hoppenbrouwers* - Röntgen Technische Dienst, The Netherlands.	NUMEX Software for Useable Film Calculation in Double Wall Girth Weld Radiography.	27
09:00	U. Ewert, J. Stade, D. Hanisch - BAM, Germany.	Comparative Analyses of the Image Quality for the Gamma Radiography with Se-75 and Ir-192 to the X-Ray Radiography.	27
09:20	V. Kaftandjian, A. Joly - INSA. T. Odievre, M. Courbière, C. Hantrais - PECHINEY. France.	Automatic Detection and Characterisation of Aluminium Weld Defects: Comparison between Radiography, Radioscopy and Human Interpretation.	27
09:40	R.K. Chapman, G.S. Woodcock - Nuclear Electric. A.B. Wooldridge - Magnox Electric. I.J. Munns, G.A. Georgiou - TWI. UK.	The Performance of Radiography for Large Planar Defects in Thick-Section Welds.	27
Session 2 - Standardisation of NDT for Welds
10:40	S. Crutzen, P. Memaitre, M. Bièth, L. Fabbri - EC, The Netherlands.*	Harmonisation of Inspection Techniques in the Pressure Equipment Industry.	27
11:00	J.-M. Tchilian - Framatome, France.	NDE of Welds. European Standards Prepared by TC 121 SC5B. State of Affairs.	27
11:20	E. Zeelenberg - Stoomwezen, The Netherlands.	Development of Acceptance Criteria for TOFD.	27
11:40	J. Toivonen - Polartest, Finland.	NDT - Wordgames for Outsiders?	27
Session 3 - Validation of Inspections Chairman: Peter Mudge, TWI, UK
14:00	Introduction: Chairman		28
14:10	N. Kopp, D. Chauveau, D. Flotté - IS, France. M. Lumbreras - Laboratoire Interfaces, France.*	Automated Classification of Weld Defects by Ultrasonic Non-Destructive Testing. *	28
14:30	F. Fücsök - ERÖKAR, Hungary.	Experiences and Problems of a Manual Ultrasonic Round-Robin Test.	28
14:50	N. Trimborn - AEA Sonomatic, The Netherlands.*	The Performance of Time-of-Flight Diffraction (TOFD) in Various International Round-Robin Trials and the Ongoing Research Work Underway Today.	28
15:10	A. Erhard, E. Schulz, G. Brekow, H. Wüstenberg - BAM, Germany. P. Kreier - Innotest, Switzerland.*	Critical Assessment to the TOFD Approach for Ultrasonic Weld Inspection.	28
Session 4 - NDE During Manufacture
16:00	B. Raj, B. Venkatraman, C.K. Mukhophadyay, T. Jayakumar, - IGCAR, India. A. Lakshminarayana - Nuclear Fuel Complex, India, a.o.*	Intelligent Welding Using NDE Sensors.	28
16:20	W. Nuding, H.-R. Gottwald, C. Sauerwein - Sauerwein System -Technik, Germany.	Radioscopic Flaw Detection during Welding.	28
16:40	F. Bettayeb, K. Alem, B. Maamache - Scientific Research Centre in Welding and NDT CSC, Algeria.*	CESOP: Computer Aided Ultrasonic Testing with Expertise and Arc Welding Parameters Optimization.	28
17:00	A.A. Doubov - Energodiagnostika, Russia.	Express Method of Weldments Inspection using Metal Magnetic Memory.	28
Posters: NDT of Welds
P	D. Flotté, D. Chauveau, IS, France. E. Crescenzo - Ixtrem, France.	Improvement of Transverse Surface Defects Detection in Welds.
P	E. Buschke, B. Kirchner - Krautkrämer, Germany.	Are New Software Technologies of Benefit to the Operator?
P	F. Badidi-Bouda, T. Meksen, K. Cherchalli - Scientific Research Centre in Welding and NDT CSC, Algeria.	The Characteristics of the Ultrasonic Testing Chain Elements Influence on the Welded Joints Non Destructive Testing.
P	F. Bettayeb, K. Alem, S. Dermoun, M. Djallel - Scientific Research Centre in Welding and NDT CSC, Algeria.*	ARCUS: Computer Aided Ultrasonic Non Destructive Testing Interpretation of Arc Welded Structures.
P	F. Ahmed, C. Poidevin, M. Serrre - CEA. F. Champigny - EDF. France.*	Characterization and Interpretation of Ultrasonic Structural Echoes in Bimetallic Welds using Mode Selecting Sensor.
P	I. Trimborn - AEA Sonomatic. J.J.M. van Nisselroij - Shell. T. Bouma - RTD. The Netherlands.	Inspection of Welded Connection is Complex Geometries by Means of the TOFD Technique.
P	G. Rihar - Inst. ZA Varilstvo. J. Rant - Josef Stefan Inst. Slovenia. *	The First Application of Imaging Plates to an Examination of Welded Joints.
Sessions: Nuclear Industry			top
Session 1 - General Presentation Chairman: Francis Pons, EDF, France
08:30	M. Samman, EDF, France.	Main Evolutions of NDT in Nuclear Industry.	27
09:00	L. Kastre - ABB, Sweden.	Visual Inspection Used in the Nuclear Field. - Making Use of Advances in Technology.	27
09:20	T. Just, W. Thale, R. Clausen - TÜV Nord, Germany.	Interpretation of Radiographs by Digital Image Processing.	27
09:40	M. Borras, E. Cabrera, J. Aldea - TECHNATOM, Spain.	Multitechnique Data Acquisition Systems: Use and Benefits in Nuclear Market.	27
Session 2 - Steam Generator Tube Inspection Session Leaders: Michel Bieth, EC, The Netherlands
10:40	T. Sollier, H. Schepens, B. Benoist - CEA. J. Reuchet- IPSN. France.*	First Evaluation of the Set (Rotating Excitation) EC Probe Designed for Fast SG Tubing Inspection.*	27
11:00	M. Piriou, I. Slazak, N. Betsch - Intercontrôle, France.	New Eddy Current Probe for Non Destructive Examination.	27
11:20	A. Debnar - CerMat Engineering. B. Lucht - KKW. Germany.	Remote Field Eddy Current on Laser Welded SG Sleeves.	27
11:40	D. Doche, L. Gay - LOGITEST. N. Robert, A. Revest - ABB Barras. D. Delacencerie - EDF/UTO. France.	Running of the BETA 1 Robot for Non-Destructive Testing on Steam Generators Tubes.	27
Session 3 - Fuel and RPV Internals Session Leaders: Ladislas Horacek, #
14:00	N. Kelstrup - ANDREX, Denmark. J. Patton - FRAMATOME, USA.	Weld Inspection of Nuclear Fuel Rod End Cap Welds.	27
14:20	H.-D. Dau - Philips Industrial X-Ray, Germany. A. Kouznetsov - JSC Maschinbuilding Plant, Russia.	Digital Image Processing in X-Ray Control of Welds.	27
14:40	T. Stepinski, P. Wu, M. Gustafsson, L. Ericsson - Uppsala Uni., Sweden.	Ultrasonic Array Technique for the Inspection of Copper Lined Canisters for Nuclear Waste Fuel.	27
15:00	R. Kazys, R. Sliteris, L. Mazeika - Kaunas Uni. of Technology, Lithuania.	Ultrasonic non-destructive Evaluation of Nuclear Fuel Bundles.	27
Session 4 - Fuel and RPV Internals, cont. Session Leaders: Ladislas Horacek, #
16:00	S.A. Vinogradov, A.I. Trofimov - Nuclear Power Eng. Inst. V.D. Baldin - Research and Dev. Inst. of Power Eng. V.V. Stasenko - Kursk Nuclear Power Plant. Russia.	Non-Destructive Examination Automated System for RBMK Reactors Fuel Channels.	27
16:20	A. Domingo, J.M. Jimenez, J.I. Ortiz - ENUSA, Spain.	Electromagnetic and Gamma Scanning Inspection of Nuclear Fuel Rods at ENUSA.	27
16:40	F. D'Annucci, F. Bonitz - ABB Reaktor, Germany. T. Yamashita - Mitsubishi Heavy Industries, Japan.	Inspection of the Barrel Welds and Barrel/former Bolts in the Pressurized Reactors.	27
17:00	P. Cerckel, D. Degreve - Laborelec, Belgium.	Virtual Instrumentation: A Revolution in Non-Destructive Testing.	27
17:20	J. Larsen, H. Kristensen, L. Jeppesen - FORCE Inst., Denmark. *	Examination of Core Shroud Welds.	27
Session 5 - Reactor Pressure Vessels Chairman: Francis Pons, EDF, France
08:30	J. Pitkänen, P. Särkiniemi, P. Kauppinen, H. Jeskanen - VTT Manufacturing Technology, Finland.	The Ultrasonic Detection and Evaluation of Defects in a Thickwalled Cylindrical Component Having Cladding on Inside Surface.	28
08:50	B. Neundorf - HEW. G. Csapo - TÜV Nord. A. Erhard - BAM. Germany.	Optimising the NDT of Boiling Water Reactors by Using Realistic Flaws in the Cladding.	28
09:10	F. Dirauf, B. Gohlke, E. Fischer - Siemens Power Generation Group, Germany.	Innovative Robotics and Ultrasonic Technology at the Examination of Reactor Pressure Vessels in BWR and PWR Nuclear Power Stations.	28
09:30	V. Just, P.O. Gros, C. Soors, D. Francois a.o. - EDF, France.	PACE, a Comprehensive Multitechnique Analysis System Applied to the Analysis of Bottom Head Penetration Tubes NDT Data.	28
09:50	J. Pinczés, D. Szabó, J. Palásti - NPP PAKS, Hungary.	Mechanised UT Inspection at the Hungarian NPP Paks.	28
Session 6 - Reactor Pressure Vessels, cont. Session Leaders: E.B. Pers Anderson, #, Sweden; Peter Trampus, IAEA, Austria
10:40	O. Roy, S. Mahaut, M. Serre - CEA, France.	Adaptive Ultrasonic Inspection of Specimens with Varying Profile using Phased Array Techniques.	28
11:00	C.J. Borgenstam, A. Engding - ABB, Sweden.	Core Shroud Inspection Manipulator.	28
11:20	Z. Skála, J. Vít - Skoda, Czech Republic.	Improvements of In-Service Inspection Systems in SKODA.	28
11:40	J. Tanguy, J.M. Tchilian - FRAMATOME. A.M. Roy, A. Valteau - EDF. France.	Detection and Characterization of Defects Perpendicular to the Surface of Welds.	28
Session 7 - Pumps and Pipes Session Leaders: Philippe Benoist, #
14:00	P. Böhm, W. Fischer - TÜV Rheinland Anlagentechnik. Von Nessen-Lapp - VEAG. Germany.*	Detection and Evaluation of Deep Cracks in Pump Shafts and Globe Valve Journals by Means of SAFT.	28
14:20	J. Cermak, J. Berlanger, G. Maes - AIB-Vincotte Inter, Belgium. H. Martinsen, H. Fernström - Vattenfall AB Ringhals, Sweden.	Development and Qualification of a Combined UT and ECT Procedure for Inservice Inspection of PWR Reactor Coolant Pump Welds, Conducted from the Inner Surface.	28
14:40	V. Just, E. Fleuet, S. Gautier, Mistral Consortium.	The BE-MISTRAL Project: A Fully Multi-Technique Approach from Acquisition to Data Fusion.	28
15:00	E. Abittan - EDF. A. Dochy - Jeumont Industry. G. Pierre, T. Allart - FRAMATOME. van der Crussen - CTE/Nordtest. France.	NDT of Thermal Barrier Flange.	28
Session 8 - Pumps and Pipes, cont. Session Leaders: Philippe Benoist, #
16:00	Start of session.		28
16:20	H.O. Olsen, L. Vesth, L. Jeppesen - FORCE Inst., Denmark.	Automated UT Examination of Inclined Nozzle Welds using Robot and 3D Reconstruction.	28
16:40	R.K. Chapman, R.C. Owen, R.V. Booler - Nuclear Electric, UK.	The Remote Inspection of Components in Advanced Gas-cooled Reactors.	28
17:00	L. Hammar - SAQ Kontroll, Sweden.	In-service Inspection by X-Ray Tomosynthesis, A New Method for Sizing IGSCC.	28
17:20	C. Perez, E. Cabrera, R. Martinez-Ona - TECHNATOM, Spain.	Advanced Techniques to Enhance the Analysis of Ultrasonic Result.	28
Posters: Nuclear Industry
P	A.N. Fedorov, S.S. Rakutov, A.V. Vatulin - VNIINM, Russia.	Eddy Current Inspection of Fuel Rod Zirconium Alloy Cladding Tubes.
P	V.V. Pastoushin, A.Yu. Novikov, A.A. Demidov - VNIINM, Russia.	Thermophysical Automatic System for Non-Destructive Gas Pressure Inspection Inside Power Reactor Fuel Rods.
P	P. Trampus - IAEA, Austria. D. Corak - INETEC, Croatia.	Advanced NDT of Primary Circuit Components of WWERE NPPs
P	A. Tanarro, A. Garcia - TECHNATOM, Spain. *	Ultrasonic Inspection. Application of Phased Array Technologies.
P	R. Ciocan, D. Ciobanu - Inst. of Nuclear Research, Romania. W.R. Mayo - Chalk River Labs., Canada.	Neural Network Classification of Flaws Detected during Ultrasonic Inspection of CANDU Pressure Tubes and Brazed Joints in CANDU Fuel. *
P	V. Yazovikov, A. Bazhenov - VNIIEF, Russia.	Ultrasonic Piezoelectric Transducers for Leak Detection Systems of Nuclear Power Plant Equipment.
P	M. Balaskó - Atomic Energy Research Inst. E. Sváb - Research Inst. for Solid State Physics. I. Cserháti - Electrolux. Hungary.	Combined Dynamic Neutron Radiography and Thermovision in Development of Absorption-Type Aggregators.
P	S. Gangotra, P.M. Ouseph, K.C. Sahoo, D.S.C. Puroshotham - Bhabha Atomic Research Centre, India.	Detection of Hybride Blisters in Irradiated Zircaloy Pressure Tubes by Neutron Radiography.
P	J.L. Singh, K.P. Prasannan, H.N. Singh, K.C. Sahoo, D.S.C. Purushotham - Bhabha Atomic Research Centre, India.	Hydrogen Concentration Profile Mapping in Zircaloy Pressure Tube by Ultrasonic Velocity Ratio Measurement.
P	K.L. Feiste, P. Fetter Marques, D. Stegemann a.o. - IKPH, Uni. of Hannover, Germany. S.E. Kruger, J.M.A. Rebello - COPPE, Brazil.*	Characterization of Nodular Cast Iron Properties by Harmonic Analysis of Eddy Current Signals.*
P	V.P. Lunin - Moscow Power Eng. Inst., Russia. H.-M. Thomas - BAM, Germany.	Finite Element Approach to Assess Inspectability of Weld Between Two Coaxial Tubes by RFEC Technique.
P	A. Domingo, J.M. Jimenez, J.I. Ortiz - ENUSA, Spain.	ENUSA Non-Destructive Testing Integrated Applications in Nuclear Fuel Rod Manufacturing.
P	A. Weiss, D. Sornet - Intercontrôle, France.	A New Technique for Support Plate Fragmentation.
P	V. Just, E. Fleuet, S. Gautier, Mistral Consortium.	The BE-MISTRAL Project: A Fully Multi-Technique Approach from Acquisition to Data Fusion.
P	J. Larsen, L. Vesth, L. Jeppesen - FORCE Inst., Denmark.	VT Examination of BWR Re-Circulation Pump Internals.
P	L. Gay, R. Bourgogne - LOGITEST. P. Jardet - EDF/GDL. France.	Steam Generator Tubes: Crack Sizing by Ultrasonic Inspection Using a Rotating Multi-Transducers Probe.
P	Yu.V. Taran - FLNP, Russia. H. Kockelmann - MPA. J. Schreiber - EADQ. Germany. J.S. Wright - ISIA, UK.*	Study of Residual Stresses in a Stainless Steel Tube with a Welded Ferritic Cover by Neutron Diffraction.
P	O. Førli - DNV. G. Ø. Lauvstad - OECD Halden Reactor Project. Norway.	The In-Service Inspection History of the Halden Boiling Water Reactor 1957-97.
P	J.F. Quirk - Phoenix Inspection Systems, UK.	Fast Track Development of Remote Inspection Device for A.G.R.s.
P	A.H. Akbar, Chashma Nuclear Power Project, Pakistan.	Development and Management of Pre-Service and In-Service Inspection Programme for Chashma Nuclear Power Project.
Sessions: Offshore Industry			top
Session 1 Chairman: Hans Meidell, Phillips Petroleum, Norway
14:00	Introduction: Chairman		28
14:10	M. Russel, D. Collyer - OIS, UK.	Provision of Inspection Services - A New Approach.	28
14:30	K.-H. Solbakken - Norsk Hydro, Norway.	In-Service Inspection of Offshore Installations Operated by Norsk Hydro in the North Sea.	28
14:50	G.A. Raine - Technical Software Consultants, UK.	The Use of the Alternating Current Field Measurement (ACFM) Technique for Mechanised Inspection.	28
15:10	T. G. Tangeland, R. Aanensen, A. Ekse, A.K. Skipenes - Phillips Petroleum, Norway.	Microbiologically Influenced Corrosion in Pross Plant at Ekofisk.	28
Session 2
16:00	E.J. Habbestad - The Norwegian Petroleum Directorate, Norway.	NDT as a Tool for Norwegian Petroleum Directorate (NPD).	28
16:20	A.Hansen, N.J. Jarem, J. Børjesson, E. Fosshaug, J. Hatlø - Robit Technology. M. Bårdson - Stolt Comex. Norway.*	Remotely Operated Eddy Current Weld Inspection and Grind Repair.	28
16:40	A. Blettner, M. Barberi, D. Chauveau - IS, France. J.C. Ancenys, L. Torrese- Stolt Comex Seaway, France.*	Radioscopy of Welds in Hyperbaric Environments. *	28
17:00	N. Barron , Q. Clark - OIS, UK. S. Moldskred - Stolt Comex Seaway, Norway.*	Deepwater Operation of Radiographic Equipment on Pipelines and Steel Structures.	28
17:20	E. Handal, N. Veland - DNV, Norway.*	Determination of Tension in Anchor Lines.*	28
Posters: Offshore Industry
P	G.I. Sletten - DNV, Norway.	Hand held Instruments for Measurements of Dynamic Strain and Vibrations.
P	A. Raine - TSC, UK. O. Førli - DNV, Norway.*	A New Guidance Document on Underwater Non Destructive Testing.*
P	S. Angelsen. J.D. Edwards - DNV, Norway.*	Risk Based Inspection -Offshore Topside Systems.
P	O. Førli - DNV, Norway. G.A. Raine - Technical Software Consultants, UK. H. Meidell - Phillips Petroleum Comp., Norway.	A Review of NDT in the Offshore Scene.
P	A.L. Shekero, Y.K. Bondarenko - E.O. Paton Electric Welding Inst., Ukraine.	Ultrasonic Testing of Drill Bits Welded Joints.
P	H. Hansen Rasmussen, L. Jeppesen - FORCE Inst., Denmark.	Industrial Application of Helium Leak Test.
P	H. Gerlach, L. Jeppesen - FORCE Inst., Denmark.	New Application in Thermography.
P	S. Moldskred - Stolt Comex Seaway, Norway. J.F. dos Santos - GKSS, Germany.*	Friction Stitch Welding Repair of Fatigue Cracks in Steel Structures.
P	A. Hansen, J. Hatlø - CorrOcean Robit Technology, Norway. *	Remotely Operated Ultrasonics for Sub-Sea Applications.
Sessions: Pipeline Inspection			top
Session 1 Chairman: A. Barbian, Pipetronix, Germany
08:30	Introduction: Chairman		28
08:40	L. Lebourgeois, O. de Vareilles - Intercontrôle, France.	ORBISCAN: New System for Pipeline Girth Welds Examination.	28
09:00	R. van Agthoven, J.A. de Raad - Röntgen Technische Dienst, The Netherlands.	Reliability of Mechanised UT Systems to Inspect Girth Welds During Pipeline Construction.	28
09:20	O. Førli - DNV, Norway. R.M. Denys - Gent Uni. S. Crutzen - EC, The Netherlands.	Development of Acceptance Criteria for Pipeline Girth Weld Defects.	28
09:40	R. Schmidt - 3P, Germany.	Inspection of Small Diameter Pipelines - A Challenge for Intelligent Pigs.	28
Session 2
10:40	J. Rosenmöller - H. Rosen Engineering, Germany.	High Resolution Intelligent Pigging Data: A Basis for Risk Assessment.	28
11:00	P. Laursen - Pipetronix, Canada. T. Sickinger, F. Günther - Pipetronix, Germany.	Development of High Performance In-Line MFL Inspection Tools - A Technical Challenge.	28
11:20	K.V. Chernyaev, E.S. Vasin - DIASCAN, Russia.	In-Line Inspection as an Effective Method of Non-Destructive Survey of Tehcnical Condition of Main Pipelines.*	28
11:40	H. Willems, A. Barbian - Pipetronix. N. Vatter - Deutsche Transalpine Oelleitung. Germany.	Operational Experience with Inline Ultrasonic Crack Inspection of German Crude Oil Pipelines.	28
Posters: Pipeline Inspection
P	R. van Agthoven - Röntgen Technische Dienst, The Netherlands.	Ultrasonic Inspection of Off-Loading Pipelines and Risers, A New and Simple Approach.*
P	J.H.J. Stalenhoef, J.A. de Raad - Röntgen Technische Dienst, The Netherlands.	MFL and PEC Tools for Plant Inspection.
P	V. Moujitski, V. Karabchevsky - MSIA Spectrum. S. Karpov - VNIIGAZ. Russia.	Eddy Current Flaw Detector for Gas Pipeline Inspection.
P	B. Redmer a.o. - BAM. M. Walkmann a.o. Germany.	Automated Weld Inspection with Improved Quality on the Basis of a Line Camera.
P	G. Zhukova, L. Khvatov - MSIA Spectrum, Russia.	Magnetic Defectoscope for Detection in the Underground Gaspipelines Walls of Stresscorrosion Cracks.
P	T. Gurieva, S.A. Egorov - Efremov Inst. V.T. Pronyakin - Bochvar Inst. V.A. Mitrokhin - VNIIKP. Russia.	Quality Control of the Toroidal Field Conductor Insert Jacket for the ITER Magnet System.
Sessions: Power Stations			top
Session 1 - Boilers and Piping Chairman: Arne H. Jensen, FORCE Institute, Denmark
14:00	Introduction: Chairman		26
14:10	M. Ruha, H. Myöhänen* - Huber Testing, Finland.	Advanced Ultrasonic and Eddy Current Inspection of Recovery Boiler Floor Tubes.	26
14:30	J. Backersgård - SAQ Kontroll, Sweden. *	Near Drum Corrosion Inspection of Boiler Tubes.*	26
14:50	L.M. Rizzi, P. Delvo` - CISE. S. Ghia, P. Gramatica - ENEL. Italy.	Creep Monitoring in Power Plants by a Holographic Moire System.	26
15:10	P. Auerkari - VTT Manufacturing Technology, Finland. K. Borggreen - FORCE Inst., Denmark. J. Storesund - ÅF-IPK, Sweden.	Evaluation of Replica Inspection Results from Power Plants.	26
Session 2 - Turbines and Generators
16:00	F. Koch-Mathian - GEC-ALSTOHM, France.	Improvement in the Performances of the TURBO-ROTOSCAN System for the Automatic Inspection of Turbo-Generator Retaining Rings.	26
16:20	K. Ludwig, G.M. Daalmans, L. Bär - Siemens AG, ZT MF1. H.P. Lohmann, E. Becker - Siemens AG, KWU. Germany. *	Crack Depth Determination in Gas Turbine Blades by Eddy Current Technique.	26
16:40	N. Thomsen, K. Agersø Nielsen - FORCE Inst., Denmark.	Ultrasonics Stress Measurement of Generator Press Bolts.	26
17:00	V.M. Baborovsky, M.J. Gull - Magnox Electric, UK.	Automated Ultrasonic Inspection of Turbine Discs.	26
17:20	A. Lamarre, N. Dubé, F. Mainguy, F. Jacques - RDTech, Canada. a.o. Ontario Hydro, Canada.	Feasibility Study of Ultrasonic Inspection Using Phased-Array of ABB L-0 Blade Root.	26
Posters: Power Stations
P	J. Peltonen, P. Pataniitty - Acutest, Finland.*	On-line AE-monitoring of Recovery Boilers.
P	V. Carl, E. Becker, A. Sperling - Siemens Power Generation Group, Germany.	Quantitative wall thickness Measurement with Impuls-Video-Thermography.
P	J. Neuenschwander, Th. Lüthi - EMPA. I.L. Horvath - ETH. Switzerland. V. Pasquer - R/D Tech, France.	Ultrasonic Testing of Aluminium Stabilized High-Current Superconducting Cables.
P		Quality Assurance on Combustion Chamber Parts in Investment Casting for Gas Turbines.
Session: Radiation Safety			top
Session 1 Chairman: Rainer Link, DGZfP, Germany.
10:40	M. Oresegun - IAEA, Austria. K. Roughan - Amersham, USA. E. Seguin - AECB, Canada.	Accidents in Industrial Radiography and Lessons to be Learned; IAEA Safety Report.*	28
11:00	M. Oresegun - IAEA, Austria.	Radiation Safety in Industrial Radiography.	28
11:20	P. van Rooijen - AIB-Vincotte, The Netherlands.	PREDICT, An alternative Approach to Radiation Protection in Industrial Radiography.	28
11:40	K.E. Schnuer - European Commission DGXI, Luxemburg.	The New European Radiation Protection Standards Directive.	28
Posters: Radiation Safety
P	M. Oresegun - IAEA, Austria.	Radiation Protection and Safety: The International Basic Safety Standards for Protection against Ionizing Radiation and the Safety of Radiation Sources (The BSS); IAEA Safety Series No. 115.*
Sessions: Radiography			top
Session 1 Chairman: Gösta Nyström, ABB TRC, Sweden
14:00	Introduction: Chairman		26
14:10	M.R. Holloway - Eastman Kodak Comp., USA. M. Knell - Eastman Kodak Comp., UK.	A New US Film System Classification and Image Quality Assessment.	26
14:30	R. Grimm, T. Kaftal - Isotopen-Technik Dr. Sauerwein, Germany.	Selenium 75 - Results from On-Site Radiography.	26
14:50	M. Cutler - High Energy Service Comp., USA.	On-Site or Field Usage of High Energy X-Ray Systems.	26
15:10	V.D. Naboschikov, V.P. Drankov - Ministry of Science and Technology, Russia.	The X-Ray Apparatus with Magnetic Regulation.	26
Session 2
16:00	M. Purschke - Rich. Seifert & Co., Germany.	Radioscopy - New Perspectives Gained through European Standardization.	26
16:20	B. Venkatraman, T. Jayakumar, P. Kalyanasundaram, Baldev Raj - IGCAR, India.	Suitability of Gadolinium Based Systems for X-Ray Real Time Radiography.	26
16:40	Y. Morin, G. Droin - KODAK, France.	Use of Tabular Grain Emulsion for Industrial X-Ray Films.	26
17:00	P. Willems, B. Vaessen - Agfa Gevaert, Belgium. W. Hueck, VEBA Ö1, Germany. U. Ewert a.o., BAM, Berlin.	Applicability of Computed Radiography for NDT.	26
17:20	B. Vaessen, F. Michiels - Afga Gevaert, Belgium.	Radiography and Ecology.	26
Session 3 Chairman: Gösta Nyström, ABB TRC, Sweden
14:00	Introduction: Chairman		27
14:10	N. Filishov, O. Borisov, W. Isaev - Introscopy, Russia.	X-Ray Introscope of Higher Sensitivity for Express-Control of Quality.	27
14:30	M. H.H. van Dijk, H.G.M. Martens - Eldim, The Netherlands.	Radiographic Inspection of Drilled Cooling Holes.	27
14:50	C. Jacobsen, U. Zscherpel, C. Nockemann - BAM. G. Brast - Preussen Elektra Hannover. Germany.	Crack Detection in Digitized Radiographs with Neuronal Methods.	27
15:10	U. Ewert, Y. Onel, U. Zscherpel, J. Stade - BAM, Germany. P. Willems - Agfa Gevaert, Belgium.	Industrial Application of Computed Radiography with Luminescence Imaging Plates.	27
Session 4
16:00	M. Münker, J. Schwarz, T. Flor - HAPEG, Germany.	High Resolution Computed Tomography on Large-Sized Objects.	27
16:20	A. Altar, A. Notea - Technion, Israel Inst. of Tehcnology, Israel.	Geometrical Magnified 3D X-Ray Tomography.	27
16:40	C. Lehr, K.L. Feiste, D. Stegemann, C.-E. Liedtke - Uni. of Hannover, Germany.	Three Dimensional Defect Analysis Using Stereoradioscopy Based on Camera Modelling.	27
17:00	O. Günnewig, W. Nuding, C. Saurwein - Sauerwein System-Technik, Germany.	High Energy 3D-Tomography in NDT.	27
17:20	A. McNulty. J. McNab* - OIS Internat. Inspection, UK.	The Small Controlled Area Radiography (SCAR) System.*	27
Posters: Radiography
P	B. Lavayssiere, R. Tomasino - EDF, France.	Performance Synthesis in Digitizing and Processing Radiographic Inspection.
P	J. Rant - J. Stefan Inst.. J. Stade - BAM, Germany. M. Balasko - KFKI, Hungary. M. Kaling, FUJI, Germany.	New Possibilities in Neutron Radiography with Imaging Plates.
P	V.A. Moskalev, V.V. Shashov - Tomsk Politechnical Uni., Russia.	High Current Betatrons for Non-destructive Testing.
P	Y. Cherfa, Y. Kabir, R. Drai - Scientific Research Centre in Welding and NDT CSC, Algeria.	X-Rays Image Segmentation for NDT of Welding Defects.*
P	C. Windeck, H. Warrikhoff - rtw Röntgen-Technik, Germany.	A New Series of Metal-Ceramic x-ray Tubes for Low Power Applications.
P	V.K. Kuleshov, V.N. Lanshakov, L.E. Kovalyova - Introscopy, Russia.	High-Sensitive X-ray Systems of Testing and Diagnostics.
P	C. Reichert. D. Stegemann a.o. - IKPH, Uni. of Hannover. H. Haferkamp, J. Gerken a.o. - Lazer Zentrum Hannover, Germany.*	Digital High-speed Microfokus-Radioscopy as a Monitoring Method for Fast Processes.
P	J. Stade, U. Ewert - BAM, Germany.*	A System for Quality Assurance for Industrial X-Ray Films.
P	K.-W. Harbich, M.P. Hentschel, D. Ekenhorst, J.V. Schors, A. Lange - BAM, Germany.	X-Ray Refraction for NDT of Micro Cracks and Impacts.
P	U. Zscherpel, C. Bellon - BAM. R. Nimtz -HEW. Germany.	Wall Thickness Estimation from Digitized Radiographs.
P	A. Sassov - SkyScan, Belgium.	High-Resolution Microlaminography.
P	D. Van Dyck, A. Sassov, E. Claes, T. Ceulemans - RUCA, Belgium.*	Phase-Contrast X-Ray Microtomography.*
P	A. Sassov - SkyScan, Belgium.	Desktop X-Ray Microtomograph.
P	C. Sauerwein, S. Schekira, H. Wiacker - Sauerwein System-Technik, Germany.	CT of High Performance for the Inspection of Large Objects.
P	N. Kelstrup - ANDREX, Denmark.	Bone Detection in Frozen Fish Blocks.
P	R. Cesareo - Uni. of Sassari, Italy. R.T. Lopes - COPPE, Brazil. A. Castellano - Uni. of Lecce, Italy.	Tomography and Microtomography for Examination of Ceramic Matrials.
P	P. Pradere, P. Cochet - Thomson Tubes Electroniques, France.	New 85 mm Proximity Focused Image Intensifiers.
P	N. Kuzelev, L. Kosarev, A. Shtan - RF Technical Physics and Automation Research Inst., Russia.	Quantitative Radionuclide Tomography for High Density Materials.
P	V. Alreja, J. Weber - V.J. Technologies, USA.	Use of Mobile Real-Time Radioscopic Systems for Inspection of Nuclear Waste Samples.
Session: Railway			top
Session 1 Chairman: I.N. Prassianakis, Nat. Techn. University of Athens, Greece
08:30	Introduction: Chairman		29
08:40	M. Gori, M. Certo - CISE. G. Patelli - Mucchini Siderurgica. L. Aruta - ASA. Italy.	Ultrasonic Assessment of Residual Stresses in the Rim of Railway Solid Wheels.	29
09:00	E. Schneider, R. Herzer* - IZFP, Germany.	Ultrasonic Evaluation of Stresses in the Rims of Railroad Wheels.	29
09:20	*I. Kolarov - High Military Transport School. M. Mihovski - Bulgarian Academy of Science. Bulgaria.	Application of Sonley's Surface Waves for Determination of Contact Pressure in Mechanical Constructions.	29
09:40	J. Pitkänen, P. Kuusinen, P. Särkiniemi, P. Kauppinen - VTT Manufacturing Technology, Finland.	The Effect of a Shrinkage Fit Joint to Ultrasonic Inspectability of a Component.	29
Sessions: Reliability and Validation			top
Session 1- Performance Demonstrations and Qualifications Chairman: Olav Førli, DNV, Norway
14:00	Introduction: Chairman		26
14:10	C. Waites, J. Whittle - AEA Technology, UK.	The Current Status of Performance Demonstration and Evaluation Developments.	26
14:30	P. Lemaitre, B. Eriksen - EC, The Netherlands. J. Whittle, AEA Technology, UK.	Lessons Learned from the ENIQ Pilot Study.	26
14:50	R. Paussu - IVO Power Engineering. P. Särkiniemi - VTT Manufact. Technology. Finland.	Capability Demonstration for Vendor Selection and Inspection Qualifications.	26
15:10	L. Gomersson - SQC Swedish NDT Qualitifaction Centre, Sweden. *	Two Years of Experience from NDT Qualifications in Sweden.	26
Session 2 - Performance Demonstrations and Qualifications, cont.
16:00	T. Sjö - ABB, Sweden.	Experiences of Qualifications Performed 1997 by TRC.	26
16:20	T.D. Koblé - Sulzer Innotec, Switzerland.	Ultrasonic Procedures for Inspection Qualification.	26
16:40	M. Bieth - EC, The Netherlands. C. Birac, R. Comby - EDF, France. G. Maciga, ENEL, Italy.	In-Service Inspection Capability of Steam Generator Tubes.	26
17:00	J. Sagnier, G. Delsarte, L. Peltier - Intercontrôle, France.	SELFIC, a Calibration System for Eddy Current Instruments.	26
17:20	R. Heumüller, G. Guse, B. Rückelt - Siemens Power Generation Group, Germany.	Qualification and Validation of new SAPHIR-UT-technology.	26
Session 3 - General Chairman: Olav Førli, DNV, Norway
08:30	Introduction: Chairman		28
08:40	O. Førli - DNV, Norway.	Nordtest Guidelines for Determination, Description and Use of NDE Reliability Data.	28
09:00	M. Wall, F.A. Wedgwood - AEA Technology, UK.	Economic Assessment of Inspection - The Inspection Value (IVM) Method.	28
09:20	C. Nockemann, C. Bellon, S. Nickisch - BAM, Germany.	The Principle of Modular Optimization and Validation of a NDT System Applied to the Problem of Radiographic Testing of Tube Welds.	28
09:40	M. Darboux, J.-M. Dinten, F. Retraint, J.J. Gagelin - LETI, CEA. N. Heymes a.o., FBFC. France. *	X-Rays Inspection of Fuel Rods Welds: Evaluation of a Quantitative Approach.	28
Posters: Reliability and Validation
P	S.E. Kruger - Uni. Libre de Bruxelles, Belgium. I.C. da Silva, J.M.A. Rebello - Federal Uni. of Rio de Janeiro, Brazil.	Factorial Planning of Experiments Applied to Reliability Assessment in Discontinuity Mapping by Ultrasound.
P	P. Lemaitre, S. Crutzen - EC, The Netherlands. F. Champigny - EDF, France. U. Sandberg - Forsmarks NPP, Sweden.	European Network for Inspection Qualification: A Status Report.
P	H. Wirdelius - SAQ Kontroll, Sweden.	The Application of Mathematical Modelling of Ultrasonic NDT in the Qualification Process.
P	M. Wall, F.A. Wedgwood - AEA Technology, UK.	Modelling of NDT Reliability (POD) and Applying Corrections for Human Factors.
Session: Ships			top
Session 1 Chairman: Roger Porter, Lloyd's Register , UK
08:30	Introduction: Chairman		29
08:40	P. Thøgersen - Odense Steel Shipyard, Denmark.	Odense Lindoe, Application of Non-Destructive Testing.	29
09:00	J. Buus Larsen - Danyard. H. Winther Pedersen - FORCE Inst.. Denmark.	NDT Control on Chemical Tankers.	29
09:40	R. Porter - Lloyd's Register, UK.	Non-destructive Examinations Applied to Hull Structure.	29
Session: Special Posters			top
P	R. Diederichs - NDT Internet Publishing, Germany.	The Advantages of the Internet in the Field of NDT.
P	J. Rusborg - FORCE Inst.. P.L. Andersen - LM Glasfiber. Denmark.	Automated Ultrasonic Inspection of Large Rotor Blades for Windmills.
Sessions: Steel Industry			top
Session 1 Chairman: Bernt* Hedlund, AB Sandvik Steel, Sweden
08:30	Introduction: Chairman		28
08:40	M. Paul, A. Hoffman - IZFP. G.-J. Deppe Mannesmannröhrenwerke. L. Oesterlein - Europipe. Germany.	Laser Ultrasonics in Industry.	28
09:00	C. Vanhille, C. Valdecantos - TECAL, Spain. *	New System for Ultrasonic Inspection of Steel Plate.	28
09:20	B. Bisiaux, M. Méphane, P. Westeel, O. Tailleux, - Vallourec Industries, France. *	Detection of Local and Smooth Wall Thickness Reduction: the "Detection Vallourec" Method.	28
09:40	W. Zleppnig - Böhler Edelstahl, Austria. G. Coen - BFI/VDEh. B. Karbach - Krautkrämer. Germany.	FIDUS, An Automatic Testing System for Hot Wires.	28
Session 2
10:40	D. Lingenberg, E. Fischer, W. Vogel, G. Bach, A. Kalwa - Siemens Power Generation Group, Germany.	Non-destructive Ultrasonic Testing for High Frequency Inductive (HFI) Pressure Welded Tubes in the Production Line.	28
11:00	W.A.K. Deutsch - Karl Deutsch, Germany. A. Cheng, J.D. Achenbach - Northwestern Uni., USA.	Defect Detection with Rayleigh and Lamb Waves Generated by a Self-Focusing Phased Array.*	28
11:20	M. Mephane, B. Bisiaux - Vallourec Industries. P. Calmon - CEA. France.	Modelling of the Ultrasonic Inspection of Steel Tubes.	28
11:40	P.-J. Schneider - NUKEM, Germany.	Ultrasonic Digital System's Electronic UTxx - Examples of Applications.	28
Session 3
14:00	Introduction: Chairman		28
14:10	J. Klasson - OFP-Teknik AB, Sweden.	Calibration of Continuously Working NDT Equipment.	28
14:30	R. Grimberg, S. Chifa, A. Savin, L. Iancu - Nat. Inst. of Research & Development for Technical Physics, Romania.	Optimal Signal Processings in the Eddy Current Non-destructive Control with Automatic Installations.	28
14:50	Shi Jihua, Zhu Qiming, Zhang Wengang - Ming Hua Inspection Equipment, China.	Automatic ET & UT On-Line Inspection System for Cold and Hot Rollers.	28
15:10	C. Hanson - Dansteel Engineering, Denmark.	Choise of NDT Equipment to Danish Steel Works Ltd.'s Bar Mill.	28
Session 4
16:00	E.S. Gorkunov, A.B. Bukhvalov - Inst. of Engineering Science, Russia.	Evaluation of the Residual Strains in Iron by Means of Coercive Force.	28
16:20	I. Alvarez, I. Díaz. - Uni. of Oviedo, Spain. Y. Malet, CDO, France.	Dimensional Control of H Shaped Steel Beams with Conoscopic Holography Based Profilometers.	28
16:40	A.S. Shleenkov, O.A. Bulichev, A.V. Matveev - Inst. of Metal Physics, Russia.	Volume-Seam Flaw Detection for Magnetic Quality Inspection of Electric Welded Pipes in the Production Line. *	28
Posters: Steel Industry
P	E.S. Gorkunov - Inst. of Engineering Science. G.V. Bida - Inst. of Metal Physics. Russia.	Magnetic Methods for the Inspection of the Mechanical Properties of Rolled Products.
P	V.F. Matyuk - National Academy of Sciences, Belarus. H. Hartmann, H. Reichelt - Research and Quality Centre Brandenburg, Germany.	Automatic Testing of Mechanical Properties of Rolled Goods in the Hot Zinc Galvanizing Line.
P	G. Posgay - L. Kossuth Uni.. P. Molnár - Metalelektro. L. Imre - Inst. for Transport Sciences. Hungary.	A Magnetic Method for Testing of High Strength Bolts.
P	K.L. Feiste, D. Stegemann, S. Reimche, C. Reichert - IKPH, Uni. of Hannover, Germany. R.T. Lopes - COPPE, Brazil	Process Integrated Detection and Characterization of Casting Defects.
P	C. Dybiec - Inst. of Precision Mechanics. A. Kozlowska - Daewoo-FSO. Poland.	Determining Residual Austenite with the Eddy Current Method.
P	L. Kroutikova - Novolipetsk Iron & Steel. J.O. Shashenkova - Central Research Inst.. Russia. V.N. Fishev, Mariupolsky Iron & Steel, Ukraine.	About CIS Standrad GOST 30415-96.
P	L. Kroutikova, Novolipetsk Iron & Steel. V.F. Muzhitskiy, B.F. Popel - Cran. Russia. G.Y. Bezlyudko, Special Sci. Instr., Ukraine.	Magnetic Inspection of Stressed State Condition and Residual Resource of Steel Work.
Session: Surface Methods			top
Session 1 Chairman: Thomas Aaström, The Pohljola Group, Finland.
16:00	N. Migoun, P. Prokhorenko - National Inst. of Sciences, Belarus.	Development of Theory and Practice of Liquid Penetrant Testing.	26
16:20	N. Rigaud - EDF. J.-M. Tchilian - FRAMATOME. France.	The Difficult Choice of Liquid Penetrant Range of Products.	26
16:40	K. Abend - Tiede, Germany.	Surface Crack Detection Using Magnetic Particle Techniques and Penetrant Inspection Method.	26
17:00	M. Zergoug, L. Smail, G. Oussaid, S. Darbane - Scientific Research Centre in Welding and NDT CSC, Algeria.*	Optimization of Parameters Control and Characterization Defects by Magnetic Particles.	26
17:20	K.-E. Norell - Contest, Sweden.	Automated Magnetic Particle Testing of Truck Spindles.*	26
Posters: Surface Methods
P	P. Shkatov, V.E. Shaternikov, I. Dobrovolskiy - Moscow State Instrument Making and Informatics Academy. U. Trofimov - AO "Orenburgenergo", Russia.	Increased Preciseness of Deep Defecting Through Electropotential Method.
P	M.A. Knyazev - Inst. of Applied Physics, Belarus.	Peculiarities of State of Ferromagnetic Materials.
P	N.V. Lubetsky, V.A. Mikhnev, G.N. Deshchenko - National Academy of Sciences, Belarus.	Microwave Vibrometer for Testing of the Rotating Objects.
P	N.G. Gaggioli, M.R. Landau, E.N. Hogert - ENDE, CAC, CNEA, Argentine.	Non Invasive Optical and Digital Metrology of Rough Surfaces.
P	F. Perez Quintián, M.A. Rebollo, Y.C.A, Raffo - Lab. de Aplicaciones Opticas. N.G. Gaggioli - ENDE, CAC, CNEA. Argentine. *	Optical Methods for On Line Surface Wire Testing.
P	M. Stadthaus, H. Lingott - BAM, Germany.	Some Aspects on the Reliability of Magnetic Particle Testing.
P	R.A.J. Soden, R.J. Dewhurst - Dept. of Instrumentation and Analytical Science, UK.	A Shearographic Inspection System Using a Liquid Crystal Phase Modulator.
P	D.Minkov, T. Shoji - Tohuku Uni., Japan.	Sizing of 3-D Surface Cracks with Complex Cross-Sections and Different Orientations Using Leakage Field.
Sessions: Ultrasonic Examination			top
Session 1 - Novel Ideas Chairman: Alan Wedgewood, AEA Technology, UK
14:00	Introduction: Chairman		26
14:10	R. Coulette, M.-H Nadal, C. Gondard - CEA, France. F. Lepoutre, D. Balageas - ONERA, France.*	New Development in the Evaluation of Weld Depth Penetration by Laser Ultrasounds.	26
14:30	H. Walaszek - CETIM, France.	Periodical Verification of Ultrasonic Flaw Detectors According to European Standardization.	26
14:50	G. Splitt - Krautkrämer, Germany.	Piezocomposite Transducers - a Milestone for Ultrasonic Testing.	26
15:10	R.S.C. Monkhouse, P.D. Wilcox, R.P. Dalton, M.J.S.Lowe, P. Cawley - Imperial College of Science, UK.	Interdigital Lamb Wave Transdusers for Rapid Monitoring of Plate Structures.	26
Session 2 - Novel Ideas, cont.
16:00	B.P.C. Rao, B. Raj - IGCAR, India. G. Hübschen, H.-J. Salzburger - IZFP, Germany.	Time-of-Flight Measurements with Shear Horizontal Waves.	26
16:20	N.N. Volkova, A.V. Mullin, A.V. Nelidov, Y.M. Tulsky - Testing and Diagnostics, Russia.	The Investigation of Frequency Spectrum while Ultrasonic Wave Propagation in Anisotropic Media.	26
16:40	P. Calmon, A. Lhémery*, L. Paradis - CEA, France.	Ultrasonic NDT Modeling of Realistic Configurations.	26
17:00	P. Lasaygues, J.-P. Lefebvre - CRNS-LMA, France.	Improvement of Resolution in Ultrasonic Reflection Tomography.	26
Session 3 - Applications Chairman: Alan Wedgewood, AEA Technology, UK
08:30	Introduction: Chairman		27
08:40	F. Wollbold, J. Neisecke - Uni. of Dortmund, Germany.	Ultrasonic Testing of Concrete with Fast Imaging Pulse-Echo-Technique.	27
09:00	Roye, U. Schlengermann - Krautkrämer, Germany.	Special Inspection Problems Solved by Means of Matched Ultrasonic Probe Design.	27
09:20	F.J. Hancock, S.C. Gibson - Mitsui Babcock Energy. A. McNab, D. Reilly - Uni. of Strathclyde. UK.*	CAMUS - A Novel System for Operator Based Ultrasonic Weld Inspection.	27
09:40	G. Passi, M. Kritsky - Sonotron. Y. Shoef - Gabi Shoef Ltd. Israel.	High Reliability Manual Ultrasonic Inspection.	27
Session 4 - Applications, cont.
10:40	P. Toebben, W.-D. Kleinert, M. Berke - Krautkrämer, Germany.	ISONIC - Complete Ultrasonic Weld Inspection Documentation by Continuous Recording of Manual Probe Manipulations, Acoustic Coupling and Echoes.	27
11:00	S. Neergaard, S.E. Iversen, W. Damgaard Kristensen - FORCE Inst., Denmark.	System for Advanced Automated Ultrasonic Examination.	27
11:20	V.A. Troitskij, E.A. Davidov - E.O. Paton Electric Welding Inst., Ukraine.	Experience of Application of "P-SCAN" Ultrasonic System in Ukraine.	27
11:40	P.B. Hansen, S. Neergaard, W. Damgaard Kristensen - FORCE Inst., Denmark.	Modular Scanner System for NDE.	27
Posters: Ultrasonic Examination
P	Zheng Kaisheng, Chen Yucheng, Zhang Hongshan - Baoji Nonferrous Metals Works. Peng Yinggui - Nanchang Inst. of Aeronautical Techn. China.*	A Technique of Ultrasonic Testing without Dead Zone for Coarse-Grained TC4* Extrusion Pipe. - The Development of Single Crystal Creeping Wave Probe.
P	M. Berke - Krautkrämer, Germany.	DGS and Reference Block Methods - Are They Still Competitors?
P	G.L. Pierre, W. Delpouve - FRAMATOME, France.	Means and Methods for Ultrasonic Array Probe Characterization.*
P	Yu.V. Lange, S.V. Nefedov - MSIA Spectrum, Russia.	Signal Processing in MIA Pulse Flaw Detectors.
P	Onozawa, K. Tamura, H. Yamamoto - Nihon Uni., Japan.	Defect Evaluation in Diffusion Bonding Interface of Dissimilar Metals Using Ultrasonic Testing Method.
P	W. Gebhardt - Frauenhofer IZFP. W. Hillger, DLR. P. Kreier, Innotest. Germany.*	Airborne Ultrasonic Probes: Design, Fabrication, Application.
P	K. Tamura, M. Onozawa - Nihon Uni., Japan.	Evaluation of Bonding Process in Diffusion Bonding Joints of Dissimilar Metals using Ultrasonic Testing Method.
P	W. Hillger - DLR Braunschweig, Germany.	Ultrasonic PC-Boards for Different Applications.
P	P.-H. Svahn - SAQ Kontroll, Sweden.	MAPPscan - Acoustic Positioning System for Manual Ultrasonic Testing of Pipes and Components.
P	R. Sickert, J. Bartusch - BAM, Germany.	An Automatic Measurement Unit for Backscattering.
P	L. Vesth, P.B. Hansen, W. Damgaard Kristensen - FORCE Inst., Denmark.	Robot System for Ultrasonic Examination of Complex Geometries.
P	A. Mayorov, G. Konovalov - National Academy of Science, Belarus.	The Automated Testing by Ultrasonic Surface Waves.
P	G. Konovalov, P. Prokhorenko, A. Mayorov - National Academy of Science, Belarus.	The Systems for Automated Ultrasonic Testing.
P	T. Olofsson, M. Gustafsson - Uppsala Uni.. H. Rydén - CSM Materialteknik. Sweden.	Multivariable Regression Approach for Porosity Determination in Composite Materials.
P	H.E. Gundtoft, K.K. Borum, S.A. Nielsen - Risø National Laboratory, Denmark.	On-Line Eccentricity Measurement during Fabrication of Aluminium Tubes.
P	M. Takahashi , M. Hoshino- Japan Probe Co. K. Kimura - Kimura Ultrasonic Testing Lab. Japan.	Experimental Study of Echo Directivity for Surface SH Wave and SH Wave Angle Probes.

Top

---

|7th ECNDT| - |NDTnet|

Created by R. Diederichs info@ndt.net