CD-Proceedings
29th European Conference on Acoustic Emission Testing 2010
Vienna, Austria, September 8-10, 2010
START PREFACE PAPERS AUTHORS SEARCH

1. SESSION:
 
1 Acoustic Emission Source Location in Plate-Like Structures using a closely arranged Triangular Sensor Array D. Aljets*, A. Chong, S. Wilcox,
*Department of Engineering, University of Glamorgan, Pontypridd, United Kingdom
2 Validation of AE-signals recorded with conventional Equipment using 3D-Scanning-Laser-Vibrometer A. Albers, J. Schell, M. Dickerhof*, B. Hessenauer,
*IPEK – Institut für Produktentwicklung, Karlsruher Institut für Technologie (KIT), Karlsruhe, Germany
3 Influence of specimen geometry on acoustic emission signals in fiber reinforced composites: FEM-simulations and experiments M. Sause*, S. Horn,
*Institute for Physics, Experimentalphysik II, University of Augsburg, Augsburg, Germany
4 Acoustic Emission on-line Inspection of Rail Wheels A. Anastasopoulos*, K. Bollas, D. Papasalouros, D. Kourousis,
*Envirocoustics SA, Athens, Greece
5 The use of acoustic emission testing on long term monitoring of damaged component C. Allevato*,
*Stress Engineering Services, Inc., Houston, USA
6 Cost effective corrosion and fatigue monitoring (CORFAT) P. Tscheliesnig*,
*Institute for Technical Physics, TÜV AUSTRIA SERVICES GMBH, Vienna, Austria
2. SESSION:
TOP
7 Acoustic Emission Monitoring of Tensile Tests on Welded Wood-Joints A. Brunner*, T. Tannert, T. Vallée,
*Laboratory for Mechanical Systems Engineering, EMPA, Dübendorf, Switzerland
8 AE Analysis of Damage Process in Thin Film Solar Cells under Mechanical Strain S. Wakayama*, Y. Mizutani,
*Department of Mechanical Engineering, Tokyo Metropolitan University, Tokyo, Japan
9 Acoustic Emission for monitoring two-phase flow D. Mba*, S. Husin, A. Addali,
*School of Engineering, Cranfield University, Bedfordshire, United Kingdom
3. SESSION:
TOP
10 Correlation of Acoustic Emission And Fractographic Characteristics During Fatigue Crack Development A. Urbah, A. Shaniavsky, S. Doroshko*, M. Banov,
*Institute of Transport Machine Technologies (ITMT), Riga Technical University (RTU), Riga, Latvia
11 Health monitoring of reinforced concrete slabs during seismic tests using acoustic emission A. Gallego*, A. Benavent-Climent, J. Vico, C. Infantes, E. Castro,
*University of Granada, Granada, Spain
12 Fatigue Damage Analysis of Pultruded Glass Fiber Reinforced Materials with Acoustic Emission Methods M. Guagliano*, D. Crivelli, D. Marangoni, A. Monici,
*Dipartimento di Meccanica, Politecnico di Milano, Milano, Italy
13 Effects of Material Structure of Concrete on Acoustic Emission Signal Parameters M. Korenska*, M. Manychova, L. Pazdera,
*Faculty of Civil Engineering Physics Department, Brno University of Technology, Brno, Czech Republic
4. SESSION:
TOP
14 Inclusion Fracture in Model Aluminium Alloy Characterized by Acoustic Emission and X-Ray Tomography J. Courbon*, V. Carmona, E. Maire,
*INSA de Lyon, laboratoire MATEIS, Villeurbanne, France
15 Reinforcement effect on the ultrasonic pulse velocity in concrete, depending on the sounding method and measuring device U. Lencis*, A. Üdris, A. Korjakins,
*Riga Technical University, Riga, Latvia
16 Acoustic Emission Monitoring of the Expansion of Fatigue Cracks in The Rolling Mill E. Nefedyev*, A. Sudakov,
*Central Boiler and Turbine Institute (CKTI), St.-Petersburg, Russia
17 AE-SiGMA Analysis in Brazilian Test and Accelerated Corrosion Test M. Ohtsu*, Y. Kawasaki,
*Graduate School of Science and Technology, Kumamoto University, Kumamoto, Japan
18 Is it Possible to Applied Acoustic Emission Method during Concrete Hardening? L. Pazdera*, L. Topolar, J. Smutny, V. Bilek, M. Korenska,
*Fac. Of Civil Eng., Dept. of Physics, Brno University of Technology, Brno, Czech Republic
19 Electromagnetic and Acoustic Emission in PEEK/Carbon Nanotube Composites P. Sedlak*, M. Enoki, T. Ogasawara, J. Sikula,
*Department of physics, FEEC, Brno University of Technology, Brno, Czech Republic
5. SESSION:
TOP
20 Non- Destructive Acoustic Test (NDAT) to determine elastic modulus of polymeric composites M. Jalili*, A. Pirayeshfar, S. Mousavi,
*Engineering and Technical , Islamic Azad university-Science and research branch, Tehran, Iran
21 Identification of The Early Mechanisms Damages Of Multilayer Composite Materials By The Mean of The Acoustic Emission Testing S. Ramadan*, S. Yaacoubi, D. Chauveau,
*Institut de Soudure Enseignement et Recherche, Yutz, France
22 Acoustic emission of conifer sapwood becomes weaker after each dehydration-rewetting cycle S. Rosner*, S. Kawamoto,
*BOKU Vienna, Vienna, Austria
6. SESSION:
TOP
23 Measurement of Mixture Mass Ratio by Acoustic Emission Method M. Uher*, P. Beneš,
*Faculty of Electrical Engineering and Communication, Department of Control and Instrumentation, Brno University of Technology, Brno, Czech Republic
24 Observation for Proportion of Super-elastic Martensitic Transformation in Cu-Al-Ni Shape Memory Alloy with AE Simulation T. Yasuda*, T. Nagamachi, H. Nishino, B. Pang, K. Yoshida,
*Graduate School of Advanced Technology and Science, The University of Tokushima, Tokushima, Japan
25 Comparison of acoustic emission behavior of various oxide and fiber composite ceramic systems A. Papargyris*, S. Papargyri-Mpeni, D. Papargyris,
*General Department of Applied Science, Materials Technology Laboratory, Technological Educational Institute, Larissa, Larissa, Greece
7. SESSION:
TOP
26 Bar-Wave Calibration of Practical AE Sensors K. Ono*, H. Cho, T. Matsua,
*University of California, Los Angeles, USA
27 Velocity sensitivity calibration of AE sensors using the through wave method and laser interferometry P. Theobald*, R. Pocklington,
*National Physical Laboratory, Teddington, United Kingdom
28 Characterization of Broadband Acoustic Emission Sensors G. Manthei*,
*Fachhochschule Gießen-Friedberg, University of Applied Sciences, Gießen, Germany
29 New developments in the field of AE systems, sensors & software H. Vallen*, J. Vallen, T. Thenikl,
*Vallen Systeme GmbH, Icking, Germany
30 Latest improvements on Freeware AGU-Vallen-Wavelet J. Vallen*, H. Vallen,
*Vallen Systeme GmbH, Icking, Germany
8. SESSION:
TOP
31 Online Monitoring of Hot Die Forging Processes Using Acoustic Emission (Part-II) I. El-Galy*, B. Behrens,
*Institute for Metal Forming and Metal Forming Machines (IFUM), Leibniz Universität Hannover, Garbsen, Germany
32 Inspection of the pressure vessel used in petrochemical with AE examination V. Gomera*, V. Sokolov, V. Fedorov, A. Okhotnikov, M. Saykova,
*Kirishinefteorgsintez Ltd, Kirishi, Russia
33 A Study on Failure behavior of CFRP Bolted Joints with Cone Washers by Using AE Monitoring. T. Katsumata*, Y. Mizutani, A. Todoroki, R. Matsuzaki,
*Tokyo Institute of Technology, Tokyo, Japan
34 AE monitoring in surface treatment of materials M. Enoki*,
*The University of Tokyo, Tokyo, Japan
9. SESSION:
TOP
35 Application of acoustic emission method for brickwork diagnostics A. Sagaidak*, S. Elisarov,
*Research and Development Institute for Concrete and Reinforced Concrete, Moscow, Russia
36 Quality Prediction of Foil Capacitors by Acoustic Emission Signals J. Smulko*, K. Józwiak, M. Olesz, L. Hasse,
*Faculty of electronics, Telecommunications and Informatics, Department of Optoelectronics and Electronics Systems, Gdansk University of Technology, Gdansk, Poland
37 Characteristics of Acoustic Emission from Impact-Damaged CFRP Pressure Vessel during Pressurization Test S. Sugimoto*, Y. Mizutani, A. Todoroki, R. Matsuzaki,
*Tokyo Institute of Technology, Tokyo, Japan
38 Monitoring the Thermowood process by means of Acoustic Emission technology J. Van der Beek*, M. Tiitta,
*Dept. of Physics & Mathematics, University of Eastern Finland, Kuopio, Finland
39 Fatigue Testing of Ship Building Material with Acoustic Emission I. Baran*, M. Nowak, J. Schmidt,
*Laboratory of Applied Research, Cracow University of Technology, Faculty of Mechanical Engineering,Institute of Production Engineering, Kraków, Poland
40 A case study for crack detection within a gas cylinder using acoustic emission testing G. Lackner*, R. Dusek,
*Institute for Technical Physics, TÜV AUSTRIA SERVICES GMBH, Vienna, Austria
10. SESSION:
TOP
41 Examination and Generation Condition of Screech Tone Detected during Gas Leakage on Pipe Using Acoustic Emission Technology K. Yoshida*, R. Laodeno, H. Nishino,
*Institute of Technology and Science, The University of Tokushima, Tokushima-city, Japan
42 Low-cost USB acoustic emission system for damage monitoring in fibre reinforced composite materials J. Burns*, T. Bradshaw, P. Cole, A. Anastasopoulos,
*Physical Acoustics Ltd, Cambridgeshire, United Kingdom
11. SESSION:
TOP
43 Buckling detection within subsea pipeline laying using Acoustic Emission technique M. Shehadeh*, M. Geliel, A. El-Araby,
*Marine Engineering, Arab Academy for Science, Technology and Maritime Transport, Alexandria, Egypt
44 The use of Acoustic Emission method for detection and location corrosion damages on railway steel bridges M. Nowak*, I. Baran, J. Schmidt,
*Laboratory of Applied Research, Cracow University of Technology, Krakow, Poland
45 Acoustic emission analysis used to investigate the spalling effect of concrete under fire load C. Grosse*, R. Richter, J. Ozbolt,
*Fachgebiet Zerstörungsfreie Werkstoffprüfung (Zentrum Baustoffe und Materialprüfung), Technische Universität München, München, Germany
12. SESSION:
TOP
46 Intelligent AE signal filtering methods V. Barat*, Y. Borodin, A. Kuzmin,
*INTERUNIS, Moscow, Russia
47 Evaluation of Increasing Damage Severity In Concrete Structures by Cluster Analysis of Acoustic Emission Signals G. Campanella*, L. Calabrese, E. Proverbio,
*Dept. Industrial Chemistry and Material Engineering, University of Messina, Messina, Italy
48 Discrimination of Acoustic Emission hits from dynamic tests of a reinforced concrete slab E. Castro*, R. Piotrkowski, A. Gallego, A. Climent,
*Politechnic University of Cartagena, Cartagena, Spain
49 Neural Network AE Source Location Apart from Structure Size and Material M. Chlada*, Z. Prevorovsky, M. Blahacek,
*Institute of Thermomechanics AS CR, v. v. i., Prague, Czech Republic
50 Frequencies and Amplitudes of AE Signals in a Plate as a Function of Source Rise Time M. Hamstad*,
*Department of Mechanical and Materials Engineering, University of Denver, Denver, USA
51 Using PCA in Acoustic Emission Condition Monitoring to Detect Faults in an Automobile Engine P. Kabiri*, A. Makinezhad,
*Computer Engineering School, Iran University of Science and Technology, Tehran, Iran
52 Identifying Acoustic Emission Events with Similar Transfer Functions F. Rauscher*,
*Vienna University of Technology, Vienna, Austria
13. SESSION:
TOP
53 Acoustic emission during three-point bending test of corroded galvanized steel A. Gallego*, E. Suarez, J. Vico, C. Infantes, R. Piotrkowski,
*University of Granada, Granada, Spain
54 Acoustic emission technique for delamination detection in CFRP laminated materials A. Gallego*, J. Martínez-Jequier, Á. Valea, F. Juanes, C. Infantes,
*University of Granada, Granada, Spain
55 Diagnostics of high-voltage varistors by acoustic emission L. Hasse*, L. Kaczmarek, J. Smulko,
*Faculty of Electronics, Telecommunications and Informatics, Department of Optoelectronics and Electronic Systems, Gdansk University of Technology, Gdansk, Poland
56 High temperature pressure vessels monitoring by acoustic emission technique C. Herve*, F. Dahmene, A. Laksimi, S. Hariri,
*CETIM, SENLIS, France
57 Monitoring of acoustic emission SIGNAL of loaded axial bearings F. Hort*, P. Mazal, F. Vlašic,
*Faculty of Mechanical Engineering, Institute of Machine and Industrial Design, Brno University of Technology, Brno, Czech Republic
58 Study of metal hydride electrodes for Ni-MH batteries by acoustic emission H. Idrissi*, A. Etiemble, L. Roue,
*Laboratory MATEIS - Team Ri2S, INSA-Lyon, Villeurbanne, France
59 Introduction to the mechanical characterization of reinforced plastic materials using the Acoustic Emission Technique F. Juanes*, Á. Valea, A. Gallego, J. Martínez-Jequier, M. Gonzalez,
*The University of the Basque Country (UPV/EHU), BILBAO, Spain
60 Ultrasonic C-Scan Imaging of Porcelain Tiles S. Kurama*, E. Eren,
*Department of Materials Science and Engineering, Anadolu University, Eskisehir, Turkey
61 Analysis of fracture resistance of tool steels by means of Acoustic Emission E. Martinez*, I. Picas, D. Casellas, J. Romeu,
*Laboratori d’Enginyeria Mecànica (LEAM), Universitat Politècnica de Catalunya (UPC), Barcelona, Spain
62 Acoustic and electromagnetic methods for wood M. Tiitta*, J. Van der Beek, R. Lappalainen, L. Tomppo,
*Dept. of Physics and Mathematics, University of Eastern Finland, Kuopio, Finland
63 Comparison of Acoustic Emission Signal and X-Ray Diffraction at Initial Stages of Fatigue Damage F. Vlašic*, P. Mazal, F. Hort,
*Faculty of Mechanical Engineering, Brno University of Technology, Brno, Czech Republic
64 Damage detection in a multilayer composite tube by guided waves ultrasonic testing S. Yaacoubi, S. Ramadan*, D. Chauveau,
*Institut de Soudure Enseignement et Recherche, Yutz, France
65 Acoustic Emission method as a Comparative Tool for Results Obtained Using Impedance Spectroscopy - Applied for Cementing Compound Specimens with Various Capillary Porosity Levels L. Pazdera*, I. Kusák, M. Lunák,
*Fac. Of Civil Eng., Dept. of Physics, Brno University of Technology, Brno, Czech Republic
66 Use of advanced signal processing technique for analyzing the Acoustic Emission signatures from mechanical transmissions B. Eftekharnejad*, D. Mba,
*School of Engineering, Cranfield University, Bedford, United Kingdom
67 Use of AE monitoring in laser cutting and resistance spot welding J. Grum*, T. Kek,
*Faculty of Mechanical Engineering, University of Ljubljana, Ljubljana, Slovenia
68 Propagation of Acoustic Emission and Acousto-ultrasonic Waves in Wood Materials S. Kawamoto*, M. Kiguchi, Y. Kataoka, M. Matsunaga, M. Kobayashi, S. Rosner, S. Okumura,
*Forestry & Forest Products Research Institute, Ibaraki, Japan
*Contact Authors
START TOP