  By Rolf Diederichs NDT.net |
| You may see some of these exhibitors on the NDTnet exhibition too. About 110 companies presented their products at the Exhibition. We presented NDT.net within the society area and we were able to meet at our booth many friends from the Internet. |
| AIPnD: Associazione Italiana Prove non Distruttive
The 15th World Conference on Non-Destructive Testing will take place in ROMA at 15 - 21 October 2000. The Conference is organized by AIPnD (Italian Society for Non-Destructive Testing Monitoring Diagnostics) on behalf of the ICNDT (International Committee for NDT) and in close collaboration with the world NDT Societies and Organizations dedicated to NDT. Deadlines: Abstracts in English at latest on Dec 31 1999. Full paper (not more than 4 pages, figures and tables incl.) at latest on April 30 2000. See more information at: |http://www.aipnd.it/roma200.htm| |
 Sergio Ghia promotes the WCNDT 2000 |
| Force FORCE Institute is one of the largest European technological service suppliers within the field of non-destructive examination, welding and material technology. The institute offers development and sales of advanced NDT-equipment as well as an extensive range of NDT and inspection services. The training, examination and certification of a wide range of personnel within the fields of NDT and welding also form part of the services of the institute. The efficiency of equipment and services is assured through the close collaboration between major industrial clients around the world and the various technical divisions of the institute. FORCE Institute is the professional choice for advanced NDE equipment and inspection services world-wide. See more information at: |FORCE Homepage| |FORCE on NDTnet| |
More 
|
| Imaconic During the last 8 years, IMASONIC has acquired a unique know-how based on outstanding and innovating solutions in the ultrasonic transducers field. Today, IMASONIC is one of the most experienced manufacturer of ultrasonic transducers using the piezocomposite technology. This technology, more and more prevalent, offers numerous advantages compared to a classical piezoelectric technology. In fact, the improvements are considerable with regard to the sensitivity-bandwidth compromise, the resolution, the signal to noise ratio... This technology also enables a greater feasibility of special transducers such as array or multielement engineering or taking into account geometrical and environmental constraints. All those characteristics associated with its mode of functioning have allowed IMASONIC to become a real specialist of the made to measure solutions adapted to precise needs. At last, to meet requirements of transducers working in immersion in the best conditions of performance, delivery time and price, IMASONIC has developed the IM series. These standard transducers, easily available, present the same advantages offered by the piezocomposite technology. See more information at: |IMASONIC Homepage| |IMASONIC on NDTnet| |
|
| IRT Inspection Research Technologies IRT Inspection Research and Technologies Ltd. Develops and manufactures turnkey nondestructive inspection equipment for a wide range of industrial applications, using ultrasonic (UT) and eddy current (EC) technologies. The instruments and integrated systems produced by IRT are supplied in application-specific configurations, which comprise of multi-channel highspeed UT electronics, real-time UT and EC software for imaging and production-line applications, servo motion control hardware, mechanical systems for part converying and scanning, multi-channel probe manipulators and fixtures, and UT transducers. See more information at: IRT Homepage, IRT on NDTnet. |
 Scan Master discussion More  IRT Flexitrak
|
| Karl Deutsch The pool-independent KARL DEUTSCH company is, since its foundation in 1949, involved in development and fabrication of NDT instruments. Characterised by continuous innova tions and reliability of the products, the trade marks ECHOGRAPH, ECHOMETER, DEUTROFLUX, LEPTOSKOP and VITOMETER, FLUXA and KD-Check are well known world-wide. Applicational experience, theoretical knowl edge and manufactoral know-how of more than 4 decades as well as the standard-conform quality management guarantee state-of-the-art instruments and accessories and a top position concerning quality, reliability and economy also for the future. See more information at: |Karl Deutsch Homepage| |Karl Deutsch on NDTnet| |
More 
|
|
Krautkramer Krautkramer demonstrated NDT solutions to customer applications. The USM 20: small, compact, economical. An ultrasonic instrument featuring a whole lot of new ideas. The new ultrasonic notebook USLT 2000; A special PCMCIA card developed by Krautkramer has made it possible - among other things - ultrasonic testing with a mobil notebook. ISONIC - a new mechanics-free and portable ultrasonic weld testing system: highest reliability for flaw detection and documentation. Krautkramer's line of portable ultrasonic and eddy current products was on display. See more information at: Krautkramer Homepage, Krautkramer on NDTnet, ISonic Showcase on NDTnet. | 
More 
|
| Metalscan METALSCAN is a French designer and manufacturer of all the different parts that go to make up the ultrasonic testing process. METALSCAN delivers complete automatic ultrasonic testing systems. Thanks to its experience and know-how, it can specify, design, validate and commission entire testing systems. In addition, with the introductin of an ISO9001 certified Quality Assurance System in 1998, we can guarantee the METALSCAN products can be perfectly reproduced and that their quality is above reproach. METALSCAN can guarantee this level of reliability thanks to resources for designing, developing and manufacturing systems and sensitive ultrasonic probes, that are not only accurate but very robust. In addition all our human resources - engineers, grade 3 COFREND specialists, technicians and so on, many of whom have twenty-five years of experience of this field - our equipment and premises work towards a single aim, namely to design and adapt all your ultrasonic nondestructive testing systems so as to improve quality and enable you to keep track of inspections, while cutting costs and delays. See more information at: |Metalscan Homepage| |Metalscan on NDTnet| |
|
| Nukem NUKEM Nutronik is one of the world leaders in ultrasonic inspection systems. It's strength came from the famous Rota - rotary head tube - and bar inspection systems. Today, Nutronik is also active in billet-inspection, forging inspection, weld - and weld profile tests, heavy plate inspection as well as C-scan systems for aeronautical ports. It's new, modular multi-purpose electronics UTxx has been highly accepted by the market and is continuously upgraded in soft- and hardware. NUKEM is also capable of combining different brands of inspection instruments in one common remote software system control. Further on, NUKEM supplies customer specific immersion transducers of all types. See more information at: |NUKEM Homepage| |NUKEM on NDTnet| |
More 
|
| Panametrics Panametrics displayed its entire line of NDT products: the 36 DL PLUS, Model 9100, and the EPOCH III with B-Scan Option, at the ECNDT Show in Copenhagen, Denmark. The 36 DL PLUS is the latest in the line of Ultrasonic Corrosion Thickness Gaging. The Model 9100 is a high speed digital flaw detector that can be configured for both in-line and off-line immersion test systems. The EPOCH III with B-Scan redefines ultrasonic corrosion inspection by mapping cross-sectional images of thickness measurements with encoder compatibility. These are just some of the ultrasonic testing devices manufactured by Panametrics in Waltham, MA. Panametrics continually sets new standards for performance and ease- of- use in ultrasonic testing equipment. For more information you can check us out on the web at www.panametrics-ndt.com. Also, you can view pictures from ECNDT at ftp://www.panametrics-ndt.com/. See more information at: |Panametrics Homepage| | Panametrics on NDTnet| |
 More 
|
| QMI QMI showed two air-coupled ultrasonic instruments in the booth of SONATEST PLC, which is their distributor for Europe. The first instrument was the SONDA 007C Airscan instrument, in production for already a few years. It operates at 400 kHz and was connected to a x-y lab scanner. The second instrument, a protoype of the AIRMAX low frequency ultrasonic instrument, featured a very high sensitivity at frequencies below 200 kHz. With AIRMAX it is possible to penetrate honeycomb materials of up to 50 cm wall thickness, and up to 30 cm thick foam sandwiches, made of ultra low density foam with less than 30kg/m3. It is also capable of testing cork insulations. See more information at: |QMI Homepage| |QMI on NDTnet| |
More 
|
| RDTech R/D Tech using Ultrasound, Eddy Current, Remote Field, EMAT, and Advanced Phased Array technologies, has solutions for all testing applications in the NDT field: turbine disk, turbine reshaft, steam generator, blade and weld inspection, composite material, aircraft wing, pipeline inspection, oil platform, and shipyard building. Tomoview, our software platform for ultrasonic data acquisition link used with our Tomoscan 11, interfaces with mechanical systems and robotics. The Tomoscan is a smaller UT system, while the Tomoscan has more than 250 units sold worldwide. The FOCUS, our UT Phased array system offers up to 128 channels. With its philosophy of "up-scale", innovative, technically advanced products with an emphasis on instrumentation and "problem solving", R/D Tech offers solutions to the following industries: petrochemical, nuclear, oil & gas industries, and aerospace, among others. See more information at: |RDTech Homepage| | RDTech on NDTnet| |
|
| YXLON International Philips Industrial X-Ray of Hamburg, Germany and Andrex AS of Copenhagen, Denmark announce their merger and the formation of, YXLON International. YXLON International is the world's leading supplier of industrial x-ray equipment for non-destructive testing, with the most comprehensive range of products, from portable x-ray units to fully automatic systems. YXLON's systems are designed to meet the increasing needs for safe and reliable products and real-time inspection in, for example, the aerospace, the automotive and the casting industries. It is the objective of YXLON International and its employees to provide the highest quality products and services. Accordingly, all manufacturing and services are carried out in conformance with ISO 9000 Standards. See more information at: |YXLON on NDTnet| |
More 
|
| NDT.net NDT.net had succesfully found more Sponsors for its Website. Also almost all sponsors of the ECNDT'98 support the ECNDT'98 proceedings online project. The NDTnet Exhibition and NDTnet Journal offer all the Services you need for efficient, inexpensive, worldwide Internet Marketing of your NDT Product. High traffic (~ 200 000 server hits/mo) means maximum exposure for your company. NDTnet is visited by more than 8000 readers each month. Links to our customers' homepages increase the audience and the information available. See more information at: |NDT.net Advertising Information and what is  WebSite Marketing
| |
More 
|
Thanks for joining us!
You may brows theExhibitor List at 7th ECNDT Homepage