Quality Material Inspection, Inc.
919 Sunset Drive,
Costa Mesa, CA 92627,
USA.

Quality Material Inspection, Inc.

Phone: (714) 631 7672
Fax: (714) 631 7861
Email: sales@qmi-inc.com
QMI: MAY '98 EXHIBITION

QMI 2020 ULTRASONIC PC CARD
SPECIFICATIONS

PULSER
Voltage
Shape
Width
Toneburst (opt.)
PRF
Output impedance
10 to 230 V (opt. 400 V), in 1 V steps
Rectangular, unipolar, negativ (10 ns rise, 5 ns fall time)
25 to 350 ns in 25 ns steps (2.5 ns steps for BW opt. 40 MHz)
1 to 20 pulses
0.3 to 10 kHz (opt. 20 kHz, Windows: max 5 kHz))
< 1 Ohm
RECEIVER
Frequency
Input impedance
Linearity
Filters
DAC
Rectification
RF display
RF output
0.5 to 20 MHz (opt. 40 MHz)
Gain
0 to 70 dB in 0.1 dB steps ( 0 to 90 dB with preamplifier)
50 Ohm
+/- 0.5 dB from 0 to 70 dB
0.5, 1, 2, 4, 10, high-pass, wideband
70 dB, slew rate: 6 dB/us (90 dB with pre-amp.)
Positiv half wave, negativ half wave, full wave
allows time and amplitude measurements
1V pp into 50 Ohm
GATES
Number
Thresholds
Position
Width
Height
Synchronization
Alarm triggering

Alarm output
Amplitude output
Time of flight
3 gates, not overlapping
1 per gate
75ns to 400 us in 25 ns steps
25 ns to 400 us in 25 ns steps
0 to 100% screen height
Initial pulse, artificial, interface triggering
coincident or anti-coincident to heighest echo -
number of admissible violations: selectable from 0 to 7
relais 0.5A / 25 V
0 to 5 V in 8 bits, total or relative to gate height
resolution 25 ns, output 0 to 5 V in 14 bits
(optional: resolution 2.5 ns, output 0 to 5 V in 16 bits)
TIME BASE
PRF

Scale
Delay
Speed
Digitization rate
in DOS: 0.3 to 10 kHz (opt. 20 kHz)
in Windows: 0.3 to 5 kHz
250 ns to 39 us per div. (mm or us units)
0 to 400 us in 25 ns steps
1000 to 9999 m/s in 1m/s steps
40 or 80 MHz (software selectable)
STANDARD SOFTWARE PACKAGES
Flaw Detection
Thickness Measurements
USTCAD (DOS) or VISUAL SAPHIR (Windows)
MESP

NDTnet 1998 May, Vol.3 No.5
SPECIAL MAY '98 EXHIBITION
Ultrasonic Flaw Detectors
| NDTnet Exhibition |
|Index of Exhibitors| |Index of Showcases|
| NDTnet |
1998 ©copyright Rolf Diederichs, info@ndt.net
/DB:Exh /SO:NDTnet /IN:QMI /CN:US /CT:UT /CT:instrument /CT:Flaw Detector /ED:1998-5