Ultrasonic Components
PC System	4 transmit/receive channels per module, expandable to 4 more transmit/receive channels for a total of 8 transmit/receive channels (optional modules)
Rack-mount System	4 transmit/receive channels per module, expandable a total of 64 transmit/receive channels (optional modules, 4 channels each)
Options	½ size analog board with 4 channels and full size analog board with 8 channels
Transmitter Pulse	Needle pulse
Transmitter Voltage	50, 100, 150, 200, 250 Vpp ; for one individual scan cycle
Transmitter Output Impedance	50 Ohm
Pulse Repetition Rate	< 5 kHz, dependent on selected sweep range and sampling rate,
Input Dynamic	97 dB with narrow-band filter 1MHz 85 dB with broad-band filter (0.3 – 15 MHz)
Frequency Range (-3 dB)	0.3 – 15 MHz
Amp Characteristics (Receiver)	Linear, logarithmic (optional)
Variable Amp/TGC	40 dB, 0.2 dB resolution
Pulse Mode	Pulse-Echo (P/E), Transmit/Receive (T/R)
Analog Boards (4 Channels)	½ size ISA (16 bit), 166mm x 127mm
Digital Boards (2)	Full size ISA (16 bit), 332mm x 127mm, and ADC clip-on
Data Processing
A/D Converter	1 ADC 10 bit (9 bit & header), 80 MS/sec 1 ADC 12 bit (11 bit & header), 40 MS/sec
A/D Converter Dynamic	54 dB for 10 bit ADC 66 dB for 12 bit ADC
A/D Converter Rate	80 MS/sec (10 bit ADC), 40 MS/sec, 20 MS/sec, 10 MS/sec, adjustable
Standard A-scan data	Included
Standard RF data	Included
Half-wave peak data	Add-on board (optional)
Pixelized A-scan data	Add-on board (optional)
Gated data	Add-on board (optional)
ALOK data	Peak Detector board (optional)
Number of Scan Cycles	256, individually programmable
Maximum Cycle Rate	1 kHz
Scan Speed	Dependent on internal bus clock (20 MHz), Cycle processing delay (30 msec) and Processing time (min. 170 msec)
Data Acquisition Rate	480 Kbytes/sec, on-line display of 4 A-scans and writing to HDD simultaneously (60 MHz Pentium processor)
Scan Cycle	Triggering Position, time, manual, external 128 programmed scan trigger functions can be activated/deactivated
Interfaces
DSP Interface	Add-on DSP board (optional) for special processing
Phased-Array Interface	Analog included Digital (optional) Programmable from PC (PCUS 40)
EMAT Phased-Array Interface	Analog included Programmable from PC (PCUS 40)
Eddy Current Interface	Digital (optional) Programmable from PC (PCUS 40)
User Interface/Menus	Controllable from PC (PCUS 40)
System Configurations	· Maximum of 8 Channels
Portable System (Laptop PC)	· Keyboard and/or touch screen (optional) operation · TFT color monitor · Protection class up to IP54 (optional)
Desktop/Tower PC	· Maximum of 64 Channels · Protection class up to IP54 (optional)
Industrial PC	· Maximum of 64 Channels · Protection class IP54
19” Rack System	· Maximum of 64 Channels · Passive backplane Protection class IP65 · High-speed data interface · Protection class IP65
Operating Temperature	-5°C to 50°C (23°F to 122°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Software CPS-N
Operating System	Windows NT
Menus	Inspection Parameter for: · component data, scan setup data, global data (date & time, · databank for component, setup, etc., history data
On-line Display	A-scan and C-scan presentation of maximum 4 selections simultaneously
Off-line Display	A-scan, Composite A-scan, C-scan, Composite BCD-scan, Zoom functions, various measuring selections, SAFT reconstruction (optional)