2-year NDT related degree	<br>
A.A.S. degree / NDT	<br>
AAS Nondestructive Testing Technology	<br>
ACFM Level 1 CSWIP,CSWIP Welding Inspection	<br>
Acfm level 2	<br>
acid etch asnt level 2	<br>
Acquisition and data analysis during examinations of primary pump welds conducted from the inside, Acquisition and data analysis detection and sizing of IGSCC in SS welds 	<br>
AINDT UT level 2,AINDT RT level 2,AINDT MT level 2,AINDT PT level 2	<br>
Aircraft NDT inspector in Royal Air Force (QNDT) equivalent training as ASNT/PCN level II. Methods, ET, LT, MT, PT, RT, UT	<br>
Airframe and Powerplant FAA	<br>
Airframe and Powerplant FAA	<br>
API 510,653 and NBIC	<br>
ASNT Level III RT, PT	<br>
AUT Operator...	<br>
AWS CWI	<br>
AWS CWI radiation safety oficer	<br>
AWS/CWI	<br>
AWS/CWI	<br>
aws/cwi api 653/510/670	<br>
aws/cwi,icbo/structural steel	<br>
aws-cawi,hardness and conductivity	<br>
AWS-CWI	<br>
AWS-CWI,MECHANICAL II	<br>
bgas cswip site coatings and welding inspector	<br>
c.s.w.i.p 3.1	<br>
c.s.w.i.p. 3.4u underwater inspection controller,c.s.w.i.p. 3.1 welding inspector,c.s.w.i.p. level 2 a.c.f.m	<br>
city&guilds in fabrication and welding inspection	<br>
Civil Aviation Safety Authority Level 2 in above methods.	<br>
couses in rt 1,pt 2, mt 2,welding technology 	<br>
cswip senior weld inspector	<br>
CSWIP WELDING INSPECTOR,EUROPEAN WELDING INSPECTOR	<br>
CWI	<br>
cwi	<br>
cwi 2, api 653	<br>
CWI by AWS	<br>
CWI, EPRI PDI IGSCC, SIZING, OVERLAY (UT)	<br>
Did automised ultrasonic course from europe-rotoscan for pipeline inspection.	<br>
Did automised ultrasonic course from europe-rotoscan for pipeline inspection.	<br>
dipl.physicist engineer	<br>
dipl.physicist engineer	<br>
E.R.S.(british gas),Front End welding inspector,Rad. assistant,M.P.I. Painting Inspector	<br>
EPRI certifid IRIS inspection,QA/QC Manager	<br>
EPRI PDI, Steam Gnerator Eddy Current Qualified Data Analyst	<br>
European Welding Engineer	<br>
FULL WESTERN AUSTRALIAN RADATION SAFTEY LICENCE	<br>
Have had Level III in PT, MT, VT also	<br>
I have training hours in every field listed above.	<br>
Ialso hold Bgas welding inspector & site coatings	<br>
Industrial Tomography	<br>
In-Service Inspector, Pressure Equipment (AICIP)	<br>
IRATA Level 3	<br>
IRIS, RFET, PDI UT DETECTION & SIZING	<br>
IRIS-STEELTEST-PMI-SUI-HARDNESS TEST-LEAK TEST-	<br>
IRRSP card for RT	<br>
JT8D-7/17 Borescope	<br>
Laser Inspection, Automated Ultrasonic, Management	<br>
Level I Vibration Analy.	<br>
Level II Eddycurrent 3.2	<br>
Level III Nital Etch	<br>
Licensed Aviation Maintenance Mechanic.	<br>
Licensed Aviation Maintenance Mechanic. Working for Everest/VIT Specializing in VT/RVT inspections of Power Generation, Chemical,Petro, infrastructure and Building visual inspections	<br>
Lloyds Cert ACFM Topside operator	<br>
MAGNETIC Particle Level II	<br>
mapscan,TOFD. UKAS RGT2 CAT3 plant inspector	<br>
Metallurgical Lab Supervisor, NDT Supervisor	<br>
MinstNDT	<br>
MTech in non destructive testing	<br>
NAS410 LEVEL III, BOEING LEVEL III	<br>
National Authority of Testing Associations - Technical Controller	<br>
ndt graduate	<br>
No NDT qualification but 4 university degrees (DUT, BSc Honours, MSc and PhD) related to instrumentation, measurement & testing, NDT, physics. Do you consider a 2 years contract as permanent ?	<br>
Non-Destructive Testing Post Certificate,Associate Diploma of Metallurgy, Certificate IV in Management,Certificate IV in Training	<br>
not certified in any method, but have worked in NDE research for 16 years now	<br>
p.m.i hands on c.s.w.i.p 3.1 weldinginspection	<br>
PCN Basic Radiation Safety,PCN Radiation Protection Supervisor	<br>
PCN II Eddy Current,ASNT I Time of Flight Diffraction,WKK Andscan	<br>
PCN uT Level 2, Metallurgist	<br>
PDI ut det & sizing AUST&FERR. w/o IGSCC	<br>
Ph.D. Eddy Currents	<br>
Please allow for $aus - $us , all figures in aus	<br>
Professional Engineer,Registered Engineer Quality Engineering, State of California, Fellow International Association of Qualityu Practitioners	<br>
Qualifed Operator for gamma ray exposure devices	<br>
Qualified aust piping ASME Appedix VIII detection & Sizing	<br>
Radiation Safety Officer for 3 years, Assistant Radiation Safety Officer for 6 years	<br>
Registered Professional Engineer	<br>
senior certified welding inspector	<br>
Specialized UT methods for IGSCC,Specialized company methods	<br>
SWI	<br>
TOFD 	<br>
tx radiography card,faa repairmans cert.	<br>
UT Wall Thickness,IRIS Operator,CBIP CWI	<br>
Very recently earned AWS-CWI certification, but I have not yet received an adjustment in pay.	<br>
welding inspection;  cswip & ers	<br>
Welding Inspector	<br>