'97 GuestBook backup

'00 GuestBook Archive
'99 GuestBook Archive
'98 GuestBook Archive

Please Sign our GuestBook
Write - Read




Showing all old entries

  1. Paula Layton - Metallurgist- NDT Technician - BHP Oil & Gas Pipe - Email: |layton@illawarra.starway.net.au| Wed Dec 31/97 13:35:34
    "hello - could do with any information on setting up probes for checking for finning on the inside of resistance welded pipe. "
  2. Paula Layton - Metallurgist - BHP Oil & Gas Pipe - Email: |layton@illawarra.starway.net.au| Wed Dec 31/97 13:26:59
    "hello"
  3. Scott Larson - NDE Level III - NES, Inc. - Email: |utmtpt@aol.com| Wed Dec 31/97 01:10:33
    "Hello"
  4. Chih-Humg Chiang, Ph.D. - Associate Professor, Department of Construction Engineering - Chaoyang University of Technology - Email: |chiangc@mail.cyut.edu.tw| Tue Dec 30/97 09:49:07
    "I have tried to search for the upcoming conferences on the area of nondestructive testing of reinforced concrete. Not much lock up to this moment. Please let me know if there is any books available on NDT of reinforced concrete, in English. I am particular interesting in new publications, including symposium proceedings. Please indicate how to purchase if you do have any book like that. Chih-Hung Chiang "
  5. Ng Min Jee - Student - National University of Malaysia - Email: |Minjisan@yahoo.com| Tue Dec 30/97 07:49:40
    "Hello, I'm doing a project on NDT in ultrasonics for faw detection in the matter of interface. I have been working so hard finding informations and literatures about it. Especially in the Journal of ULTRASONICS. Can anybody help me? Thank you."
  6. Jeffrey W. Bragg - Nondestructive Inspector - U.S. Navy (active) - Email: |jwbcsb822@aol.com| Sat Dec 27/97 06:01:18
    "12/26/97 Just beginning my search of employment possibilities should the Navy and I decide to go our seperate ways. I am certified under Military Standard 271 Level 2 in the following methods: Visual (VT/VT5x) Liquid Penetrant (GRP I, III, V(Flouresent dye) Magnetic Particle (Dry and WET) I calibrate both types of these Radiographic Operator and Film Interp (RASO Gamma Radiographer) Ultrasonic Inspector (compressional, sil-braze, shear-wave) Intrested in any information that any one can provide Also, here is my mailing address: Jeffrey W. Bragg 3068 Bonefish Circle Apt O4 Silverdale WA (8315"
  7. M. Zwanzig - UT/MT/PT II /RT I - RTD GMBH - Email: || Wed Dec 24/97 00:56:21
    "I wish you a merry X-mas and a happy new year ! I "
  8. Ole JH Moe - Snr.Appl. Eng. - . - Email: |ojhmoe@compuserve.com| Tue Dec 23/97 08:24:51
    "Hi"
  9. Bob Skonberg - NDT Engineer, Technician, Specialist, Analyst, Consultant and Instructror - Self - Email: |rskon@sierra.net and Bskon1@AOL.com| Mon Dec 22/97 06:25:45
    "Enjoy what I have seen so far. Keep up the good work."
  10. - - - Email: || Mon Dec 22/97 06:00:35
    ""
  11. DENT MCINTYRE - NDE MANAGER - B&W CANADA - Email: |MCINTYRJ@PGG.MCDERMOTT.COM| Fri Dec 19/97 14:42:21
    "HI: I stumbled onto this site by accident. It looks great. You need to get more publicity. I will certainly tell my associates."
  12. Fred E. Raco, Jr. - Director - NDT, ASNT Level III RT UT MT PT VT - CP Industries, Inc., McKeesport, PA - Email: |racofe@christypark.com| Wed Dec 17/97 02:33:34
    "CP Industries, Inc. manufactures seamless compressed gas cylinders for ASME, DOT and Military applications. We use automated (PC Based)ultrasonic imaging systems, Magnetic particle, Liquid penetrant, leak testing and visual inspections to comply with ever growing customer and code requirements. I'm part of a network of NDT professionals that rely on each other for technical assistance when needed. If questions can be answered with a short phone call, email me and I'll see what I can do for you."
  13. David Grimes - Program Mgr. - Ajax Manufacturing - Park-Ohio - Email: || Sun Dec 14/97 00:10:02
    "I'm interested in publications relating to ultrasonic testing."
  14. Fred Shipp - NDT Technician - T.W.I Technical Welding Inspection - Email: |M_Shipp@hotmail.com| Sat Dec 13/97 18:50:44
    "I Am interested in look for a job with another outfit. Do you know of any web sites or mailings I can get some Info from. Thanks, Fred Shipp"
  15. john bates - manager - trentham enterprises pty ltd - Email: |trentndt@opera.iinet.net.au| Fri Dec 12/97 12:33:58
    "require information of ndt castings dgs system"
  16. Adolfo Rodriguez Miguelez - Student - University of Dundee - Scotland - Email: |a.rodriguezmiguelez@dundee.ac.uk| Fri Dec 12/97 11:59:55
    "Hello, in first congratulations by your very good work with this web page. It is very complete and with great variety of information about the interesting subject of ultrasonics. Like you are most informed in this subject that me, I am going to make my request with the objective that you could help me. I have to develope a project about measure of paper (banknotes in particular) with ultrasonic waves. I would be grateful to you if could provide me some information about this subject, or tell me the way to get some information, like books, articles, web pages, or address of somebody with knowledge about this. This proyect will be my final project to get my degree as Electronic Engineer in University of Oviedo (Spain), in spite of that I am developing this subject in University of Dundee. My e-mail address is a.rodriguezmiguelez@dundee.ac.uk and my post address 24 Springfield, 3 Dundee - Scotland Thank you very much in advance and sorry by my bad English. "
  17. G. Holdt - Engineer for material testing - BfS - Email: |GHoldt@BfS.de| Thu Dec 11/97 14:48:55
    "The NDT-Journal is a good information basic for my work. Thanks for jour good work Mr. Diedrichs!"
  18. vidar johansen - ndt-tech - self employed - Email: |kjell.johanse@online.no| Thu Dec 11/97 14:37:38
    "pleased to meet you"
  19. Garve Scott-Lodge - NDT Technician - Can Offshore - Email: |highex@cali.co.uk| Thu Dec 11/97 01:29:00
    "hi"
  20. Dean Jones - Ultra Sonics Operator (Level 1) - IPSCO (Steel and Pipe Edmonton-Canada) - Email: |pipemkr@AOL.com| Wed Dec 10/97 05:21:55
    "Greetings I was pleasantly surprised to see something like this on the net. Keep up the good work!! Dean Jones"
  21. CHARLIE JACKSON. - NDT TECH - NORTHERN NDT SERVICES LTD. - Email: |Charlie.Jackson@onyxnet.co.uk| Fri Dec 05/97 19:55:30
    "Hello, I'm new to 'the net', and interested in automated UT applications. Thank you "
  22. Franklin T. Fomby - Systems Manager - DOUBLECOTE - Email: |fombyf@hotmail.com| Fri Dec 05/97 04:46:19
    "Help me help myself "
  23. Hector J. Silverman - ASNT Level III UT; ET; PT; MT; and VT Consulting, Training, Inspection - NDTec, Inc. - Email: |ndtec@icanect.net| Fri Dec 05/97 01:50:05
    "I have been involved in NDT for over 24 years and have worked the nulear and aircraft industries. I currently hold an ASNT certificate in 5 methods and have recently started a new company, NDTec, Inc. We perform consulting, training, and inspection services. We will be holding a Level III refresher course in Miami in Feb. Look for our add in Materials Evaluation in the Jan issue. Thank you."
  24. Michael A. McKaig - Level III / Project Manager - ABB Combustion Engineering Nuclear Operations - Email: |michael.mckaig@ussev.mail.abb.com| Thu Dec 04/97 16:24:11
    "Hello, This is a tremendous service to the NDE community and a great source of information. Keep up the good work. Of particular interest to me is RPV inspection detection and sizing techniques in accordance with ASME App. VIII."
  25. STEVE R. SIDERIUS - NDT TECHNICIAN - MOUNTAIN CONSTRUCTION SERVICES - Email: |mcsspok@eznet.com| Thu Dec 04/97 00:15:07
    "Hello, I was looking for information on the net concerning NDT services and general information and ran across your site. I will visit again. Have a very Merry Christmas and a Happy New Year."
  26. Danny Anderson - Aerospace Engineer - US Air Force - Email: |andersonda@fusn1.mcclellan.af.mil| Wed Dec 03/97 00:56:33
    "Your site looks like it could be very useful to me."
  27. "Hello, in first congratulations by your very good work with this web page. It is very complete and with great variety of information about the interesting subject of ultrasonics. Like you are most informed in this subject that me, I am going to make my request with the objective that you could help me. I have to develope a project about measure of paper (banknotes in particular) with ultrasonic waves. I would be grateful to you if could provide me some information about this subject, or tell me the way to get some information, like books, articles, web pages, or address of somebody with knowledge about this. This proyect will be my final project to get my degree as Electronic Engineer in University of Oviedo (Spain), in spite of that I am developing this subject in University of Dundee. My e-mail address is a.rodriguezmiguelez@dundee.ac.uk and my post address 24 Springfield, 3 Dundee - Scotland Thank you very much in advance and sorry by my bad English. "
  28. G. Holdt - Engineer for material testing - BfS - Email: |GHoldt@BfS.de| Thu Dec 11/97 14:48:55
    "The NDT-Journal is a good information basic for my work. Thanks for jour good work Mr. Diedrichs!"
  29. vidar johansen - ndt-tech - self employed - Email: |kjell.johanse@online.no| Thu Dec 11/97 14:37:38
    "pleased to meet you"
  30. Garve Scott-Lodge - NDT Technician - Can Offshore - Email: |highex@cali.co.uk| Thu Dec 11/97 01:29:00
    "hi"
  31. Dean Jones - Ultra Sonics Operator (Level 1) - IPSCO (Steel and Pipe Edmonton-Canada) - Email: |pipemkr@AOL.com| Wed Dec 10/97 05:21:55
    "Greetings I was pleasantly surprised to see something like this on the net. Keep up the good work!! Dean Jones"
  32. CHARLIE JACKSON. - NDT TECH - NORTHERN NDT SERVICES LTD. - Email: |Charlie.Jackson@onyxnet.co.uk| Fri Dec 05/97 19:55:30
    "Hello, I'm new to 'the net', and interested in automated UT applications. Thank you "
  33. Franklin T. Fomby - Systems Manager - DOUBLECOTE - Email: |fombyf@hotmail.com| Fri Dec 05/97 04:46:19
    "Help me help myself "
  34. Hector J. Silverman - ASNT Level III UT; ET; PT; MT; and VT Consulting, Training, Inspection - NDTec, Inc. - Email: |ndtec@icanect.net| Fri Dec 05/97 01:50:05
    "I have been involved in NDT for over 24 years and have worked the nulear and aircraft industries. I currently hold an ASNT certificate in 5 methods and have recently started a new company, NDTec, Inc. We perform consulting, training, and inspection services. We will be holding a Level III refresher course in Miami in Feb. Look for our add in Materials Evaluation in the Jan issue. Thank you."
  35. Michael A. McKaig - Level III / Project Manager - ABB Combustion Engineering Nuclear Operations - Email: |michael.mckaig@ussev.mail.abb.com| Thu Dec 04/97 16:24:11
    "Hello, This is a tremendous service to the NDE community and a great source of information. Keep up the good work. Of particular interest to me is RPV inspection detection and sizing techniques in accordance with ASME App. VIII."
  36. STEVE R. SIDERIUS - NDT TECHNICIAN - MOUNTAIN CONSTRUCTION SERVICES - Email: |mcsspok@eznet.com| Thu Dec 04/97 00:15:07
    "Hello, I was looking for information on the net concerning NDT services and general information and ran across your site. I will visit again. Have a very Merry Christmas and a Happy New Year."
  37. Danny Anderson - Aerospace Engineer - US Air Force - Email: |andersonda@fusn1.mcclellan.af.mil| Wed Dec 03/97 00:56:33
    "Your site looks like it could be very useful to me."
  38. sam smeeton - n d t tech - a h t - Email: || Tue Nov 25/97 02:36:25
    "good service thanks "
  39. William Streett - - Impact-Echo Instruments, LLC - Email: |wbs@impact-echo.com| Mon Nov 24/97 20:24:29
    "Interested in contacts with anyone interested in NDT for concrete and masonry."
  40. T S Connelly - NDT/QA Consultant - T S Connelly - Email: |103000.1251@compuserve.com| Sun Nov 23/97 19:13:35
    "Hello"
  41. Sanford Hillman - Mechanical Engineering Manager - Phillips Petroleum Company - Email: |wshillm@bvemx.ppco.com| Thu Nov 20/97 23:08:03
    "I was refered to your site by Mark Dreiling in our R&D Department. We are cooperating to find better ways to inspect our Refinery piping and vessels. I look forward to giving your site a thorough review."
  42. BOB WHITMAN - ENGINEER - E. I. DUPONT DENEMOURS - Email: |WHITMARW@BELLATLANTIC.NET| Thu Nov 20/97 03:42:48
    "I HAVE RECENTLY RECIEVED MY LEVEL II CERT. AND FIND THIS SITE OF GREAT INTEREST. I WOULD LIKE TO FIND SOME INFORMATION ON THE CALIBRATION AND TECHNIQUE FOR USING A KB WSY70 TRANSDUCER."
  43. Todd Hollier - Level 3 Five Methods - Capitol Ultrasonic Co. - Email: || Thu Nov 20/97 02:05:20
    "Hello"
  44. Larry Warnock - Eddy Current Analyst Level III - TAI, Services, inc. - Email: |buford@sprintmail.com| Mon Nov 17/97 22:02:14
    "Hello, I'm just bookmarking this page in hopes of a little information on Eddy Current testing later on in the year.. Thanks."
  45. David Kurek - NDE Engineer - WesDyne International - Email: |kurekd@wcsmail.com| Mon Nov 17/97 19:00:04
    ""responsive and professional feedback to real problems""
  46. John Dougherty - contruction worker - F-3 enterprises - Email: || Sun Nov 16/97 01:53:05
    "Hello"
  47. mark thompson - ndt technician - mqs inspection milwaukee,wi - Email: |mthomp2894@aol.com| Wed Nov 12/97 03:07:21
    "hello: looking for the latest and greatest in ut contact methods thanks"
  48. Larry Kuretich - Maintenance - Newmont Gold - Twin Creeks Mine - Email: |lkur1@newmont.corp.com| Sun Nov 09/97 05:07:46
    "We use Infrared Thermography, Ultrasonic Testing And Vibration analysis to provide information as to the condition of our equipment"
  49. Young Hong - ASNT member. Instrument dealer in Korea. - Korins Co.,Ltd. - Email: |hong@korins.com| Sun Nov 09/97 02:46:10
    "We are NDT instrument dealer in Korea. We are a member of ASNT."
  50. Kenneth G. LeBlanc - QA/QC Supervisor, RSO - SAW PIPES USA,Inc. - Email: |leblanc@idt.net| Sun Nov 09/97 00:19:20
    "Well executed site."
  51. ra pappas - physicist - doe pacific northwest national laboratory - Email: |ra_pappas@pnl.gov| Sat Nov 08/97 00:31:12
    "hello"
  52. Taesik Kim - graduate - Korea Advanced Institute of Science and Tech. - Email: |gory97@bomun.kaist.ac.kr| Fri Nov 07/97 13:43:53
    "hello.. "
  53. Christopher P. Chartier - NDE Senior Technician - C Tech Specialty Systems - Email: |chartier@neilnet.com| Fri Nov 07/97 03:37:48
    "Hello there all fellow NDT'ers!! What a great industry."
  54. John Toms - Student - UMIST Manchester UK - Email: |jtoms1@compuserve.com| Wed Nov 05/97 10:45:44
    "Hello, I am interested in using piezoelecric as a tactile transducer for a deaf blind microreader via the hand. If you have any links I could go to or product suggestions I would appreciate it. Thanks. John."
  55. Tim Prince - Quality Engineer - Westinghouse Savannah River Company - Email: |Timothy.Prince@srs.gov| Tue Nov 04/97 21:46:17
    "I accidently stumbled on this web site looking for visual examination information. Does anyone know where to purchase the cards with an 18% neutral gray background with a 1/32" black line that are used in lieu of a footcandle meter when verifying adequate lighting to perform a visual examination. Thanks, Tim (please CC: tprince@groupz.net"
  56. Hank Marek - Research Engineer - USGOV-DOT-FAA - Email: |hank_marek@admin.tc.faa.gov| Tue Nov 04/97 16:49:35
    "Leaving Entry"
  57. Norm Woodward - NDI Program Manager - Warner Robins Air Logistics Center - Email: |nwoodward@ti.robins.af.mil| Mon Nov 03/97 18:00:38
    "This site has definitely become an important tool in getting world-wide distribution of important ndt development information."
  58. Steven Brier - Investment - Middle Market Corp. - Email: |stefano2@gate.net| Sun Nov 02/97 11:26:33
    "You have a great site. I was doing some due diligence on financing an ulatrsound manufacturer. I did a search this early A.M. using the word "automotive" and found lots of interest buy none of your links were working. Check it out."
  59. Ralf Raabe - NDT-Inspector - Lufthansa - Email: |RALF RAABE @aol.com| Fri Oct 31/97 17:34:43
    "Hello,it is the first time by NDT-Net,it`s real good !!!!!"
  60. José Fabião - Inspector Engineer - Portugal Economic Ministry - Email: |dren@esoterica.pt| Fri Oct 31/97 16:40:35
    "As someonelse told "great site"; it's true...I'd like to correspond with someone in NDT Engineering of offshore or with some pretty eyes girl . Bye know"
  61. anton wijaya - contractor - mustika indra mas - Email: |anton@ub.net.id| Fri Oct 31/97 14:51:38
    "please send us catalog completed by mail panjaitan 55 cilacap- indonesia"
  62. Indra Dermawan - student - - Email: |indra@system.paume.itb.ac.id| Fri Oct 31/97 03:57:25
    "Hello ! I am a newcomer in ultrasonic field."
    anton wijaya - contractor - mustika indra mas - Email: |anton@ub.net.id| Fri Oct 31/97 14:51:38
    "please send us catalog completed by mail panjaitan 55 cilacap- indonesia"
  63. Indra Dermawan - student - - Email: |indra@system.paume.itb.ac.id| Fri Oct 31/97 03:57:25
    "Hello ! I am a newcomer in ultrasonic field."
  64. Andrew S. Bullock - NDT Technician - ABB - Email: |ABullock@concentric.net| Thu Oct 30/97 01:52:06
    "Hello."
  65. Huikai Xie - Graduate student - Tufts University - Email: |xhuikai@emerald.tufts.edu| Tue Oct 28/97 23:50:48
    "Hello! It is a great site. I'd like to know some information about ultrasonic transducers."
  66. Byron L. Vines - Senior NDT Engineer - Solutia, Inc. - Email: |Blvine@solutia.com| Mon Oct 27/97 17:11:23
    "Hello from the guys in the Metallurgy Lab."
  67. sam ward - managing director - fylde cost ndt ltd - Email: |fylde coast ndt@blackpool.net| Thu Oct 23/97 23:15:26
    "hello"
  68. Kevin Anderson - Maintenance Engineering - Cessna Aircraft Co. - Email: |kanderson@cessna.textron.com| Thu Oct 23/97 16:03:51
    "Great web site! Thanks for providing this means of communication. I am looking for companies that manufacture and or service NDI equipment for inspection of adhesively bonded and composite aircraft structures."
  69. Gerhard van der Merwe - Metallurgical Engineer - Spoornet, Republic of South Africa - Email: |GerhardVan@Transnet.co.za| Thu Oct 23/97 07:56:08
    "Hello, I need some information on the ultrasonic testing of hollow railway axles. Can any one please help me? Thanks"
  70. Trond Nordvik - Senior Insp., Nordtest Level III RT,UT,MT,PT - Kvaerner Oil & Gas - Email: |trondn@online.no| Wed Oct 22/97 23:26:28
    "hello"
  71. Gido Prahm - Student - - Email: |gidprahm@hermes.fho-emden.de| Tue Oct 21/97 14:18:33
    "Hi! Very interesting site. I'm looking for some information about ultrasonic testing on CFK-Materials and especially about sqirter-techniques. See you again."
  72. Young Hong - President - Korins Co..,Ltd. - Email: |hong@korins.com| Tue Oct 21/97 13:12:44
    "We are NDT instrument dealer in Korea. We hope to be a member of ndt.net."
  73. K.F.Broujeni - Consultant - Quantum NDT U.K - Email: |KBroujeni@compuserve.com| Tue Oct 21/97 02:18:26
    "It is with pleasure to sign your guestbook. K.Broujeni"
  74. Costantino Volpe - Metallurgical engineer - Tiffany & Co. - Email: |TiffanyMFG@aol.com| Mon Oct 20/97 15:10:30
    "Looks like a great site. Hope to use it to bring some much needed technology into our industry"
  75. JD TACKETT - QC INSP - PES - Email: |Inspfly@swbell.net| Thu Oct 16/97 03:05:54
    "always looking for updates and or information on training. also I would like to become a member! Thank you"
  76. Clark Southoff - Engineering Manager - Technology Wranglers Inc. - Email: |cwsouth@telusplanet.net| Wed Oct 15/97 11:06:51
    "A very informative web site. "
  77. Rick Ogilvy - Technical Officer - Inspection - Nabalco, GOVE , Northern Territory - Email: |r.ogilvy@nabalco.com.au| Thu Oct 09/97 07:21:53
    "very good, hope to see some more involvement/content from Australia"
  78. Dorothy "Dot" Carney - Programmer (Graphics & Visualization) - NASA/Lewis Research Center - Cleveland, OH USA - Email: |dcarney@lerc.nasa.gov| Wed Oct 08/97 20:12:14
    "My compliments to the creators of this site. I would like to chat one-on-one with any COMPUTER PROGRAMMERS who support NDT. My particular interest is in the visualization of data. If there is enough interest, might we enhance this web-site with some User Libraries ... for example, simple examples of how to display regular grids of data in 2D and 3D ? What software are you using to display your NDT images ? Email me !"
  79. jeff Clemons - Sales Representative - Falon Ultrasonics Inc. - Email: |jclemons@sympatico.ca| Wed Oct 08/97 18:39:05
    "hello"
  80. Conze, Heinz-Wilhelm - Dipl.-Ing. Ausbildung ZfP - - Email: |hwconze@t-online.de| Wed Oct 08/97 13:17:53
    "Hallo Mr. Dietrichs, I am very curious to see your Picturs of the lufthansa excursion on the 4th of Oct. in Hamburg. I hope they will be better than mine. Is it possibel to get some of your pictures?? with best wishes h.-w.conze"
  81. Keith Williams - Student - Southern University - Email: |kwill1129@aol.com| Mon Oct 06/97 08:07:45
    "Hello! I am looking for companies that perform NDI tests on Investment Cast Titanium. Your urgent reply would be very helpful!"
  82. D. W. Cherudin - Mechanical Engineer - PT. ARUN NGL - Email: |dxwildan@lse.mobil.com| Mon Oct 06/97 03:27:16
    "hello"
  83. jocelyn langlois - ultrasonic engineering - sigma transducers, inc. - Email: |jocelyn_l@hotmail.com| Sun Oct 05/97 20:23:04
    "great site!! but i really needed info on accoustic emmision today."
  84. Anthony J. Egan - Inspection & Reliability - - Email: |ajegan@ni.net| Fri Oct 03/97 00:07:31
    "Hello, second time to visit this page. I need several professional NDT personnel for ongoing projects. In particular Level II & III RT inspectors. Best rates and relocation packages available to the right people. Also, currently authoring a who's who in the international world of NDT. Welcome any and all comments on vendors and end users. "
  85. Andreas Haus - Engineer - INOEX-USA - Email: |INOHAUS@AOL.COM| Thu Oct 02/97 17:09:44
    "Hallo Herr Diederich, habe soeben den in der NW veroeffentlichten Artikel gelesen. Viel Glueck und Erfolg auf dem Internet. MfG Andreas Haus P.S. Ich lebe z.Zt. mit meiner Familie in USA, sonst wuerde ich mal vorbeischauen. "
  86. Dave Stubbs - Research Engineer - University of Dayton Res. Inst. (Ohio, USA) - Email: |stubbs@flyernet.udayton.edu| Wed Oct 01/97 19:33:40
    "This is an excellent site. I will be back often."
  87. Mats Bjur - NDT Engineer - SAQ Kontroll AB - Email: |matsbj@saq.se| Tue Sep 23/97 14:50:02
    "Hello."
  88. Bruce Kane - CGSB RT. UT Level2 - RTD Quality Services - Email: |MSTBARON@MSN.COM| Mon Sep 22/97 04:13:38
    "FANTASTIC SITE WILL VISIT ON MANY OCCASIONS"
  89. David Boult - Inspection Field Supervisor - Saudi Aramco - Email: |boultdx@mail.aramco.com.sa| Sun Sep 21/97 09:29:04
    "A great source of information :>)"
  90. Vladimir A.Golev - UT System Engineer - Ultes ltd ,Russia - Email: |uzk@ultes.msk.ru| Fri Sep 19/97 00:23:35
    "Hello"
  91. Michael J. Stackhouse - Pipeline Inspection - Pipetronix Inc. - Email: |mstackhouse@pipetronixusa.com| Thu Sep 18/97 14:21:05
    "We are interested in staffing a NDT tech and purchasing Krautkramer U.S.N.52. "
  92. Mikel Salaberria San Vicente - Quality manager - O X I M E K , S. L. - Email: |talo@facilnet.es| Thu Sep 18/97 08:52:02
    "I was very possitively impressed when I readed for first your web site's pages, specially some of the articles."
  93. Ben Armitage - Field Tech/Electrical Engineer - NDT Engineering - Email: |NDT1008@aol.com| Thu Sep 18/97 04:52:30
    "Hello"
  94. Ole JH Moe - Appl.Eng/Ops.Man - CATS INTERNATIONAL, SOUTHPORT,ENGLAND. - Email: |ojhmoe@compuserve.com| Wed Sep 17/97 20:35:28
    "Hi, I work for CATS INTERNATIONAL LTD. Some of our main functions are to carry out ToFD, Corrosion Mapping Etc., using the CONTEST 4. If any queries, please E-Mail me. Thanks for a great page!! "
  95. Carlos Wightman S. Menezes - Equipament Inspector - Petrobras - Email: |znpx@fafen-ba.petrobras.com.br| Wed Sep 17/97 16:57:54
    ""Hello !", I'm so happy by discovering this special place to ultrasonic users and researchers. I'm an Equipament Inspector and on present a Mechanic engeneering graduating. I'm very interestd in development of size measurement tecniques of defects on helping to Fracture Mechanics evaluatoin. "
  96. Randy L. Cox - I&C Supervisor - Carolina Power & Light - Email: |Randy.Cox@CPLC.com| Wed Sep 17/97 15:13:42
    "I have been receiving some differing comments concerning the feasibility of using UT to determine the bond of babbit to cast bearing housings for motors. Some vendors say that the porus material will not allow for an accurate reading and others say that it does. Of course the ones that say it works always say that a new pour is required since testing indicates that the bond is not sufficient. I would appreciate any guidence you can provide ."
  97. Robert Borgstrom - Research engineer - Lulea University of Technology - Email: |robert.borgstrom@mb.luth.se| Tue Sep 16/97 14:51:49
    "Seam tracking sensors......"
  98. Karen Paula L. Veroy - Graduate Student - Massachusetts Institute of Technology - Email: |kplveroy@mit.edu| Mon Sep 15/97 20:17:59
    "no comment ... yet"
  99. Bob Cuthbert - Level II - UT, RT, MT, PT - Hi-Tech Testing Service, Inc - Email: |duster@worldnet.att.net| Sun Sep 14/97 04:55:31
    "I am interested in automated ultrasonic techniques(field applications) and alternatives to IRIS and UBIS inspections. Also interested in training programs for UT Level II and III. I would also like information concerning the pros and cons of Remote Field ET vs IRIS type inspections of 2" to 4" ID ferromagnetic tubes."
  100. George (Buddy) Butcher - NDT Level II-RT,UT,MT,PT,VT API 653, RP-2X - Unattached - Email: |gammaman1@aol.com| Sun Sep 14/97 04:47:27
    "Hello! Very nice and informative site. I plan to come back often."
  101. Bodo Besselmann - Student (Electronical Engineering) - University of Duisburg (Germany) - Email: |b.besselmann@uni-duisburg.de| Fri Sep 12/97 16:46:33
    "I am looking for special information about a so-called SELL-Wandler (in german terminology). SELL is the inventor`s name, and this sort of transducer is used to produce ultrasound. Can anybody give me a hint? Thanks "
  102. Andy Holroyd - Equipment Rental Specialists - Ashtead Technology Inc - Email: |Ashteadusa@aol.com| Fri Sep 12/97 03:43:21
    "Ashtead Technolgy is one of the worlds leading equipment rental companies, specializing in survey, ndt and inspection equipment. For equipment lists and products please contact us at 281-398-9533 or e-mail ashteadusa@aol.com "
  103. P.K.Singhania - Business - Ndt Laboratories Pvt.Ltd. - Email: |ndtl@giascl01.vsnl.net.in| Thu Sep 11/97 07:56:19
    "Hello, I just got to get into this site. Have not gone through it yet. Will get back to You Later with my comments. Thank you."
  104. ROMILDO RUDEK JUNIOR - EQUIPAMENT INSPECTOR - PETROBRAS - Email: |ARU6@REPAR.PETROBRAS.COM.BR| Wed Sep 10/97 20:46:31
    "My special interest is focalized probes. "
  105. Grover Hardy - Consultant - - Email: |GrLeHardy| Sun Sep 07/97 15:21:44
    "Hello"
  106. RAMESH ARUL - QA/QC/NDT SUPERVISOR - KNM STEEL CONSTRUCTION SDN BHD - Email: |rmesh@pc.jaring.my| Sun Sep 07/97 07:17:36
    "GREETINGS FROM MALAYSIA OUR COMPANY HAS JUST RECENTLY MOVED INTO QUALIFYING THEIR QA/QC PERSONNELS WITH NDT KNOWLEDGE AND APPLICATIONS,AND NOW WE ARE INTERESTED IN TIME OF FLIGHT DIFFRACTION (TOFD).WE WOULD APPRECIATE ANY INFORMATION REGARDING TOFD.THANK YOU. "
  107. RAMESH ARUL - QA/QC/NDT SUPERVISOR - KNM STEEL CONSTRUCTION SDN BHD - Email: |rmesh@pc.jaring.my| Sun Sep 07/97 06:40:09
    "GREETINGS FROM MALAYSIA OUR COMPANY HAS JUST RECENTLY MOVED INTO QUALIFYING THEIR QA/QC PERSONNELS WITH NDT KNOWLEDGE AND APPLICATIONS,AND NOW WE ARE INTERESTED IN TIME OF FLIGHT DIFFRATION (TOFD).WE WOULD APPRECIATE ANY INFORMATION REGARDING TOFD.THANK YOU. "
  108. John Dean - Power Systems Supervisor - A.S.E.T. - Email: |clydeo1@aol.com| Sat Sep 06/97 05:54:40
    "Hello Iam new at this type of testing. I can use all the information possible. I bought a Sonic mark IV cheap and will use it to learn on. Is there uses for this in the electrical motor field?"
  109. jim burke - welding/struct. inspector/nde specialist - carlson testing inc - Email: |nspctrjm@mail.gte.net| Wed Sep 03/97 09:45:30
    "to the software bug,-- what's up? hello, its good to know there are others on the web who speak,read,and write ut.i'll be back to see if i can catch up on some of your tofd articles. thanks, jim"
  110. Csaba A. Hollo - Vice President - Orion Testing Services Ltd - Email: |hollo@oriontest.com| Wed Sep 03/97 03:49:37
    "Excellent resource for UT and other NDE topics. Keep up the good work."
  111. Fred Schur - NDT Engineer, LIII MP, FP, UT, RT,ET - Lufthansa (retired) - Email: |schur,ndt@t-online.de| Tue Sep 02/97 18:22:45
    "first surf in the ndt net will be back soon"
  112. Dr. Krieger - Bauingenieur - BASt - Email: |juergen.krieger@bast.de| Mon Sep 01/97 11:03:55
    "Ich habe hier viele interessante Hinweise und Beiträge gefunden. Vielen Dank J.Krieger "
  113. Manuel Haces V. - Mech. Eng. NDT Inspection - Haces Ingeniería, S.A. de C.V. - Email: |haces@correo.tamnet.com.mx| Fri Aug 29/97 04:43:49
    "Offering NDT Services for Weld Inspection in Tampico, Tam. México, RT, UT, MP, PT and Visual Inspection. Tel. (12) 123314 & 191044"
  114. OLE JH MOE - APPL. ENGINEER - CATS INTERNATIONAL LTD. - Email: |ojhmoe@compuserve.com| Thu Aug 28/97 09:46:04
    "Hi, my name is ole. I work for CATS INTERNATIONAL LTD, Southport,England."
  115. Jim Tedesco - NDI Services - Advanced Material Inspection and Consulting - Email: |jktedesco@aol.com| Wed Aug 27/97 00:34:25
    "Available for Ultrasonic inspection of advanced materials such as graphite composite and various fiber reinforced materials."
  116. Thomas Hiller - Manager, NDE Specialist - Arnprior NDT Inspection & Consulting Service - Email: |t.hiller@arnprior.com| Tue Aug 26/97 03:39:11
    "Guten Tag! I"m looking try upgrade my software version for my DMEDL Data Transfer Utility Ver. 1990, I would like to change at least the port from com 1 or 2 to LPT1 or 2. Also something which will allow me to edit the file format. And is it possible to upgrade my datalogger from 1200 readings to something more. Please send me a reply. Thanks"
  117. Kenneth D. Anderson - NDT - Aerospace / Industrial Engineer - United States Air Force - Email: |kensue@iland.net| Fri Aug 22/97 20:30:59
    "Hello, enjoying your web site."
  118. Michael C. Conner - nuclear technician - Framatome Technologies Inc. - Email: |Merlin@valunet.com| Wed Aug 13/97 20:36:06
    "Hello. I dont know what I am suppose to put in here, but I am looking for a job in the nondestructive field. I have been working in the nuclear field for 8 yrs.(still employed) but would like to stay home more. I am currently a Lvl. 2 eddy current operator, presently taking my Lvl. 2A QDA analyst test. Would like to find work with NDT in the airline business. Thank You for any responses. "
  119. Gregg R. Anderson - NDT Staffing - Sonic Sytems International, Inc. - Email: |SSIAtlanta@msn.com| Tue Aug 12/97 23:21:26
    "Hello"
  120. Joern H. Mortensen - Sr. Control Tech. - Phillips Petroleum Co. Norway. - Email: |joernhm@online.no| Sat Aug 09/97 11:04:04
    "Hi!! I am working on the Ekofisk oilfield, North sea, with P-scan UT equipment. We are mostly scanning for corrosion in process piping, but also performs weld insp. and TOFD of known defects. This is a great site, which I visit, at least, once a week. Keep up the good work."
  121. Peter Paul De Vere - Consulting Engineer - De Vere Engineering Services - Email: |devere@asme.org| Thu Aug 07/97 23:43:11
    "Greetings & Salutations form Deep In The Heart Of Texas!! Thank you for this beatiful source of information!"
  122. magdalena lopez - licenciada - guanajuato world trade commision (cofoce) - Email: |cofoce@buzon.online.com.mx| Mon Aug 04/97 18:47:50
    "The Guanajuato World Trade Commission (COFOCE) is an state agency commited to promote foreign trade and investments in the state of Guanajuato in Mexico. In our information center we received entrepreneurs interested on exports and imports. Now we are looking for a direct producer or manufacturer of PVC tubes, the company is interested in contact a supplier of PVC scrap to import to Mexico We've been surfing throught out the net without success, could you help us to find out suppliers? We appreciate all your assistance Magdalena Lopez Guanajuato World Trade Commission (COFOCE) Information Center Prol. Blvd. Camprestre 1519-2, Valle del Campestre 37150, Leon, Guanajuato, Mexico Tel. (52-47) 17-7933, 17-5510 Fax (52-47) 17-9467 email: cofoce@buzon.online.com.mx"
  123. R. Mark Havira - Engineer, Vice President - Pandrol Jackson,INc - Email: |rmhavira@worldnet.att.net| Sat Aug 02/97 19:13:19
    "Interest are in ultrasonic inspection of rail at high speeds using pattern recognition techniques."
  124. rick j. connelly - ndt/qc inspector - spec consultants - Email: |shearwave@aol.com| Sat Aug 02/97 02:29:15
    "hello"
  125. John Routh - dry cleaning - fifth avenue cleaning - Email: |jrouth@ix.netcom.com| Tue Jul 29/97 11:52:37
    "any works available on the use of ultrasonics for clothes cleaning? Let me know how and where. Would greatly appreciate the news."
  126. DEJAN MOMCILOVIC - DPIL.ENG.METALLURGY - INSTITUTE FOR MATERIALS TESTING - Email: |DMOMCILO@F.BG.AC.YU| Mon Jul 28/97 17:53:14
    "SEE YOU SOON!"
  127. Manfred Johannes - Scientist - Eskom Technology Group - Email: |Johannes@TRI.Eskom.co.za| Wed Jul 23/97 16:15:34
    "Thank you for the excellent service - it saves time in finding out what is knew and available. Keep it up"
  128. yamile morales - electronic engineer - lineas areas suramericanas - Email: |ybenju@hotmail.com| Tue Jul 22/97 21:53:05
    "hello"
  129. Wm. Richard LeDuke - Manager of NDT Services - Stupp Corporation - Email: |wrleduke@stupp.com| Sat Jul 19/97 00:19:21
    "Looks like you have a lot of valuable information here! "
  130. S.WARD - N.D.T. OPERATOR - Fylde Coast N.D.T. Ltd - Email: || Wed Jul 16/97 20:08:43
    "hello"
  131. Alain RENARD - QA manager - TECH-SEP - Email: |Alain-RUEIL.RENARD@rhone-poulenc.com| Mon Jul 14/97 19:35:43
    "interested in NDT of ceramics"
  132. Trent Prasser - student - - Email: || Sun Jul 13/97 06:47:16
    "Some verry thought provoking pictures. Maybe a page devoted to interesting graphics with a laymans description would increase the interest in your site? congrats on site."
  133. Simon Griffin - PhD Researcher - The Nottingham Trent University - Email: |s.j.griff@techie.com| Wed Jul 09/97 15:52:15
    "Second year post graduate research involved in fluid level detection using air transmission ultrasonics. Also contaminant detection in container filling operations, anybody doing similar?"
  134. Bob Wright - President - Probe Corrosion Services Ltd - Email: |probe@solar winds.com| Mon Jul 07/97 04:27:51
    "hello "
  135. S.WARD - NDT OPERATOR - FYLDE COAST N.D.T.LTD - Email: |fylde.coast ndt&BLACKPOL.NET| Sat Jun 28/97 17:57:18
    "HELLO"
  136. H. Esser - Managing Director - C. Melchers & Co (Thailand) Ltd. - Email: |melchers@samart.co.th| Fri Jun 27/97 09:52:31
    "hello"
  137. Henry R. Seemann - Robotic in composet inspection - AutoCrawler LLC - Email: |H579@aol.com| Wed Jun 25/97 09:50:30
    "Please send me information on software for composite inspection archiving with robotics. 2320 north 196 street suite q-201 seattle wa 98133 tel 206 367 8163 fax 206 440 8893"
  138. llars thulin - managing director - industria consult sweden hb - Email: |lars.thulin@mbox302.swipnet.se| Tue Jun 24/97 17:51:45
    "looking for ndt testiers for testing of welded steel tubes. welding speed 150 m/min. sizes from 12 mm od incl. 55 mm od gauges from 0.6 mm incl.3 mm weld has to be guaranteed 100 % ok for "submerged feeder cabels" of offshore drilling. thanksfull for a quick replay regards lars thulin"
  139. A. Rau - Research Fellow - University of Minnesota - Email: |rauxx003@tc.umn.edu| Wed Jun 18/97 19:58:43
    ".... a gold mine ... been digging away!! I'm interested in air-coupled xdcrs, composite materials, fast signal processing.... Anyone with expertise in these areas are welcome share thoughts with me!! "
  140. Bill Dalzell - research Engineer - AEA Technology - Email: |Bill.Dalzell@aeat.co.uk| Wed Jun 18/97 12:41:21
    "Hi. I'm trawling for infomation on stress measurement in ferromagnetic materials by whatever means."
  141. Aubrey D'Costa - N.D.T - N.D.T & Weld Inspection Services & Radscan Services Pvt Ltd., Bangalore INDIA - Email: |radscan@hotmail.com / ndtwis@usa.net| Tue Jun 17/97 12:53:34
    "We are an NDT service company. I am interested in getting to know about other companies like us in your country, the standards you follow, the kind of equipment you use, your safety regulations, in short everthing connected with NDT."
  142. Luke Ghislain - Engineer - Digital Instruments - Email: |luke@di.com| Tue Jun 17/97 07:59:45
    "Thanks for the PVDF papers!"
  143. Antonia Schiavini - segretaria Sindaco - Comune di Cremona - Email: |Sindaco@rccr.cremona.it| Sun Jun 15/97 08:23:48
    "......... aiuto! Ho cominciato oggi a navigare e sono capitata qui per caso! Grazie comunque per l'ospitalità . "
  144. L. C. Lam - Sales Engineer - Zhenhua Co. - Email: |lclam@hknet.com| Wed Jun 11/97 10:46:30
    "We are a trading co. and looking for NDT equipment for selling in P. R. China market. "
  145. Roberto Moura De Agosto - Researcher on Instrumentation - Federal University of Rio Grande do Sul -Eletr.Dept. - Email: |AGOSTO@VORTEX.UFRGS.BR| Sun Jun 08/97 14:43:28
    "I am researcher on Instrum.at Fed.Univ.RGS/DELET/Electr.Eletron. Lab (IEE).Working now on:analysis of consolidation of human bones by US.Will be very glad to speak with workers in US (students also !) and exchange ideas as to do.My first interest is analysis of osseous callus on the interior (endosseous callus) do long bones .There is no technology now to get an early information to physicians ,funda- mentally only X-rays but is not so early as is necessary to one good medical treatment."
  146. HT2 Steve Shaffer - NDT Inspector NEC 4944 - U.S. Navy,NAVIMFAC Pearl Harbor - Email: |N80cr@imfgw.hnl.mrms.navy.mil| Sat Jun 07/97 01:33:58
    "Hello, Just looking around."
  147. Markus Holthaus - Engineer - SLV Duisburg GmbH - Email: |m.holthaus@cww.de| Sat Jun 07/97 00:48:33
    "Hello, I am interested in ultrasonic and plastics. I think, this is a good place to get some good information about these themes."
  148. Larry Pearson - Engineering Technician - Mich. Department of Transportation - Email: |pearsonl@mdot.state.mi.us| Fri Jun 06/97 18:54:12
    "Hello. I have had to develop several methods to ultrasonically inspect various configurations use in the highway system. I am trained at a Level II. "
  149. Christine Miller - undergraduate at the University of Missouri-Rolla - - Email: |cmm@umr.edu| Fri Jun 06/97 16:18:32
    "Hello"
  150. J. Mark Davis - Consultant, Author, and Inventor - Davis NDE, Inc. and Eggsercizer - Email: |mkdavis@bham.mindspring.com| Wed Jun 04/97 14:24:39
    "To Whom It May Concern: I am training instructor in Nondestructive Testing focusing on Advanced Ultrasonic Testing. My expertise is in the field of flaw detection and most importantly flaw sizing. I am interested in the advancement of flaw sizing techniques for manual and automated inpsections. I recently return from Kiev where I conducted ultrasonic training and flaw sizing applications. I will travel to Moscow in August to train the Russians. I perform Third Party Flaw Sizing Inspections for many companies around the world. My goal is to establish flaw sizing techniques like ID Creeping Waves, Tip Diffraction, Bi-Modal, and Refracted Longitudinal Waves as primary flaw sizing techniques in lieu of Amplitude Drop and Amplitude Comparison Techniques. I want to bring the ultrasonic sizing technology that was developed in the late seventies and complied at the EPRI NDE Center to other markets beside Nuclear Power. I am working with ASTM on a tutorial guide for Advanced Flaw Sizing methods. I would appreciate any information through your group on Ultrasonic Detection and Flaw Sizing technology. Also, I will try to get on your chat line. Sincerely, J. Mark Davis UT Level III "Innovation Capitalist" "
  151. Oliver Mark - - student - Email: |o.mark@rhein-neckar.netsurf.de| Tue Jun 03/97 23:07:03
    "Servus! Find ich ja witzig... Normalerweise sucht man sich im Internet zu Tode oder findet nur mehr oder weniger nutzloses Zeug, aber komischerweise gibts zum Thema Ultraschall allerhand gutes Material im Netz."
  152. J. Mark Davis - Consultant, Author, and Inventor - Davis NDE, Inc. and Eggsercizer - Email: |mkdavis@bham.mindspring.com| Wed Jun 04/97 14:24:39
    "To Whom It May Concern: I am training instructor in Nondestructive Testing focusing on Advanced Ultrasonic Testing. My expertise is in the field of flaw detection and most importantly flaw sizing. I am interested in the advancement of flaw sizing techniques for manual and automated inpsections. I recently return from Kiev where I conducted ultrasonic training and flaw sizing applications. I will travel to Moscow in August to train the Russians. I perform Third Party Flaw Sizing Inspections for many companies around the world. My goal is to establish flaw sizing techniques like ID Creeping Waves, Tip Diffraction, Bi-Modal, and Refracted Longitudinal Waves as primary flaw sizing techniques in lieu of Amplitude Drop and Amplitude Comparison Techniques. I want to bring the ultrasonic sizing technology that was developed in the late seventies and complied at the EPRI NDE Center to other markets beside Nuclear Power. I am working with ASTM on a tutorial guide for Advanced Flaw Sizing methods. I would appreciate any information through your group on Ultrasonic Detection and Flaw Sizing technology. Also, I will try to get on your chat line. Sincerely, J. Mark Davis UT Level III "Innovation Capitalist" "
  154. Bob Lasser - VP - Imperium, Inc. - Email: |blasser@po.mctec.com| Fri May 30/97 16:16:13
    "Hello: I am part of a start-up company which has patented a microelectronic array, 128x128 elements, which generates depth sensitive c-scan images in real time (1/30 second) and am interested in learning what the potential applications would be. Thanks."
  155. Monica Engquist - Graphic Designer - AdTech - Email: || Fri May 30/97 05:37:11
    "howdy people"
  156. Bob Lasser - VP - Imperium, Inc. - Email: |blasser@po.mctec.com| Fri May 30/97 16:16:13
    "Hello: I am part of a start-up company which has patented a microelectronic array, 128x128 elements, which generates depth sensitive c-scan images in real time (1/30 second) and am interested in learning what the potential applications would be. Thanks."
  157. Monica Engquist - Graphic Designer - AdTech - Email: || Fri May 30/97 05:37:11
    "howdy people"
  158. Michael Moles - Research Scientist - Moles Consulting - Email: |molesconsulting@msn.com| Thu May 29/97 16:45:37
    "Hi and Hello! I'll comment later when I have used UT Online more often. "
  159. Jacinto Mª Jiménez Martínez - Estudiante de 5º de Ingenieria de Telecomunicación - Ninguna - Email: |jajimar@teleco.upv.es| Thu May 29/97 10:14:15
    "Hello, I,m a student of Engineering. I,m going to do a proyect about Ultrasound. I,m looking for information about that. This web page seems very interesting. I hope to visit it a lot of times. Bye."
  160. Ryszard Pikulik - assistent - INSTITUTE FOR PLANT BREEDING AND ACCLIMATIZATION - Email: |pikulik@logonet.com.pl| Wed May 28/97 19:05:26
    "Pentium 16,0MB, PCI,Dial-Up,TCP/IP Microsoft Windows 95, Word6,0,Exel5,0 Gentlmen: We work with sugar beet seeds and are intrested in the high frequency RF date-acquisition system. I would like to ask you to furnish us with all pertinent information regarding the type of the system, price etc. at your earliest convenience. Yours sincerely, Ryszard Pikulik "
  161. Tony Woods - - - Email: |doreen1018@aol.com| Mon May 26/97 06:15:02
    "hello"
  162. Bruce A. Stetler - Director of Technical Sales & Mktg. - US Inspection Services - Email: |bas32459@aol.com| Sat May 24/97 19:15:24
    "I am in need of experienced UT Immersion Technicians for 2 of our locations. Please E-mail me at bas32459@aol.com or fax resume to 937-228-4615."
  163. Keith J. Kociba - Graduate Research Associate (Ph.D.) - The Ohio State University - Email: |bkociba@ix.netcom.com| Fri May 23/97 18:09:38
    "Guten Tag!"
  164. Shawn A Jefferds - Equipment Manager - IESCO - Email: |ndedude@aol.com| Fri May 23/97 04:53:50
    "It's good to see that the world of Nondestructive Testing is making an effort to join the world community on the Internet. Some people think that think it's just a fad and don't realize that theres a whole electronic world they don't see that is passing them by. We can as an industry little afford to bypass the opportunity to grow with ever changing technoligies. Congratulations to everyone who's seen the potential and made the leap. "
  165. Russell Zeckner, PE - Engineer - HT Technologies - Email: |ERMINITE@aol.com| Thu May 22/97 14:05:50
    "Interested in technologies which allow fast accurate inspection of in-place undergound storage tanks. Equipment costs, training requirements, survey times, capabiliies, limitations, etc. Thank-you"
  166. Curt Lampkin - Physicist - I-NET / Wang - Email: |curtis.lampkin-1@ksc.nasa.gov| Wed May 21/97 20:24:49
    "hello"
  167. Robert Billings - Materials/Corrosion Engineer - ARCO Exploration & Production Technology - Email: |rbillin1@mail.arco.com| Wed May 21/97 03:41:21
    "Hello"
  168. Phillip Sigmund - Chemical Engineer - High Pressure Extraction Ltd., - Email: |hypex@saltspring.com| Tue May 20/97 20:33:10
    "hello"
  169. K.J. WOODHOUSE - MANAGING DIRECTOR - COMMERCIAL MARINE INTERNATIONAL NZ LTD - Email: |CMI.NZ@xtra.co.nz| Mon May 19/97 10:15:09
    "Looking for more information regarding the "Alternating Current Field Measurement" (ACFM)for intrisic use inside Oil Refineries and NDT of high pressure vessel welds and general Industry inspection. I believe this ACFM technique is rapidly replacing the MPI and eddy current systems in use today. I look forward to your reply."
  170. german h. salazar - mechanical engineer - - Email: |ndtins.mty1.uninet.net.mx| Wed May 14/97 06:28:26
    "congratulations for your page, is an excelent source of information. best regards german h. salazar monterrey, mexico"
  171. David Ellis - UT/LEVEL III - DOE COMPUTER AND CONSULTING - Email: |doe1@pacbell.net| Sat May 10/97 09:57:26
    " "Hello" I am new to this web page keepup the good work."
  172. John A. Newland - Owner/President - JAN X-ray Services, Inc. - Email: |janx@voyager.net| Wed May 07/97 17:09:40
    "I'm in the neighborhood looking to hire a UT level II technician. Got any ideas?"
  173. jeffrey - dj - none - Email: |38993222| Tue May 06/97 09:47:14
    "big hello to ultraconic i am your biggest fan"
  174. Dale Drigans - Sr. NDE Specialist - Florida Power Corp. - Email: |dale.drigans@fpc.com| Mon May 05/97 19:26:49
    "hello......"
  175. Teck Sun, Lee - Mechanical Final Year Student - Nottingham Trent Univerity,UK. - Email: |ce603300@ntu.ac.uk| Wed Apr 30/97 23:56:13
    ""I am currently doing a power ultrasound degassing research. I have a doubt in designing a radial cell horn ( resonant ring ) for the system. I need some hint and guideline in doing this research soonest. Hope you can help me. ""
  176. Godfrey Hands - NDT & Resonant Inspection Consultant - Godfrey Hands Ltd - Email: |Godfrey@hands-ltd.demon.co.uk| Wed Apr 30/97 13:12:21
    "Hello"
  177. R.J. Townsend - Equipment Engineer - The Boeing Co. - Email: |robert.j.townsend@boeing.com| Tue Apr 29/97 15:07:46
    "Hello: "
  178. Henry Michael Millan - Senior Technician - Consolidated Edison of New York - Email: |hmillan@mail.idt.net| Mon Apr 28/97 14:06:26
    "Hello, Been in the feild since the mid 60's. Remember assisting in the U.T. Insp of the L.E.M. (dated?) out there in the Grumman Plant. I've worked on just about any U.T., M.T., P.T., R.T. and E.T. examination both in N.D.T. labs and presently at the Consolidated Edison Co. of N.Y. I am also proficient in the programming of CMM Machines and dimensional inspection. Check this out, I'm a "young" 52 years old. Drop me an E-mail, if only to get acquainted."
  179. R.J. Townsend - Equipment Engineer - The Boeing Co. - Email: |robert.j.townsend@boeing.com| Tue Apr 29/97 15:07:46
    "Hello: "
  180. Henry Michael Millan - Senior Technician - Consolidated Edison of New York - Email: |hmillan@mail.idt.net| Mon Apr 28/97 14:06:26
    "Hello, Been in the feild since the mid 60's. Remember assisting in the U.T. Insp of the L.E.M. (dated?) out there in the Grumman Plant. I've worked on just about any U.T., M.T., P.T., R.T. and E.T. examination both in N.D.T. labs and presently at the Consolidated Edison Co. of N.Y. I am also proficient in the programming of CMM Machines and dimensional inspection. Check this out, I'm a "young" 52 years old. Drop me an E-mail, if only to get acquainted."
  181. len Green - Quality Engineer - Otis elevator - Email: |greenl@bloom.otis.utc.com| Sat Apr 26/97 14:07:31
    "Hello; Interested in mostly ultrasonic applications in a manufacturing environment. Len Green"
  182. Tim Boyd - NDT Technician - Thunder Basin Coal Company - Email: |teejay@vcn.com| Sat Apr 26/97 07:44:06
    "Howdy, from Wyoming"
  183. Willem J. Atsma - Grad student - UBC - Email: |watsma@mech.ubc.ca| Thu Apr 24/97 21:05:08
    "hello, I found a lot of useful information here, a great site. Thanks. "
  184. aleksandra fucic - PhD,biolog - inst.med red occup health - Email: |afucic@imi.hr| Wed Apr 23/97 13:48:07
    "hello"
  185. David C. Emahiser - Engineer - McDonnell Douglas - Email: |demahiser@mdc.com| Tue Apr 22/97 17:35:00
    "hello"
  186. Amy Van De Hey - NDT - US Air Force - Email: |porsche@wazoo.com| Mon Apr 21/97 23:44:33
    "This is great. I'm separating fromthe Air Force in Sept 97. Have over 6 1/2 years experience in UT, PT, MT, RT, ET, Oil Analysis, Bondtesting...ect. You name it, I've done it. Anyone know of any openings?"
  187. SYLVAIN LEGER - TECHNICIAN - GEC ALSTHOM AMF TRANSPORT INC. - Email: |sleger@videotron.ca| Sun Apr 20/97 13:36:55
    "Very interesting web site. Doe's anybody have information on ultrasonic examination of Locomotive axles. Is there a way to make it as sensitive as Magnetic Particle Examination?"
  188. Jerry Sooter - Service Coordinator - Staveley Instruments - Email: |sooter@oneworld.owt.com| Fri Apr 18/97 07:04:58
    "Hello all! Great page with a lot of information"
  189. Jamie - doing a NDT course in college - - Email: || Wed Apr 16/97 16:09:02
    "Since I have been in this NDT program I found that LP and MP and RT were pretty easy to understand and learn, but I have just started to do ultrasonic testing and I'm finding that I have a problem understanding it. I think that for anyone who likes to work in the field this is a very good course to take."
  190. Frenois Christian - Ingenieur - FAST Universite PARIS 6 - Email: |frenois@fast.u-psud.fr| Tue Apr 15/97 09:52:59
    "Thank you very match for your paper. This is very enteresting. See you later"
  191. Frenois Christian - Ingenieur - FAST Universite PARIS 6 - Email: |frenois@fast.u-psud.fr| Tue Apr 15/97 09:51:47
    "Thank you very match for your paper. This is very enteresting. See you later"
  192. Michael Hnytka - Material Engineering Technologist - Rivest Testing - Email: |iggy@compusmart.ab.ca| Tue Apr 15/97 07:23:47
    "Hello, I'm looking forward to participating in the mechanised UT segment of the conferrence."
  193. R Scott Heiser - ASNT Level II UT PT MT - Bludwoth Bond Ship Yard - Email: |Heiser@computron.net| Tue Apr 15/97 03:29:13
    "Good Reading"
  194. Pål Edvin J Olsen - Sertifikatutsteder - Finnmark Spesialavfall a.s - Email: |pejolsen@online.no| Thu Apr 10/97 18:20:58
    "Hello ! "
  195. Gerhard C van der Merwe - Engineer - Spoornet, RSA - Email: |GerhardV2@transnet.co.za| Thu Apr 10/97 14:51:58
    "Hello again, I need some information regarding light intensity required for visual testing."
  196. gregory knop - N.D.T. inspector - U.S. NAVY - Email: |gknop@aol.com| Thu Apr 10/97 04:29:58
    "Hello any new information would be great since all Navy material is ancient."
  197. Rami - - IRT - Email: |rami@www.irt.co.il| Wed Apr 09/97 23:13:50
    "Hi Rolf! So I finally got into the NDT Net!. I could not find the introductory article about ultrasonic testing. I thought you had said that the articel on platic inspection had such an introduction. Was that correct? By the way, the info you have on IRT sales offices is not correct. Please ask Siliu to update it. All the best, Rami"
  198. Jerry M. Lauderdale - Plant Engineer - Uponor Aldyl Company, Inc. - Email: |102167.3513 @compuserve| Tue Apr 08/97 16:33:59
    "Uponor Aldyl Company, Inc. manufactures polyethylene pipe for use in natural gas distribution systems. Our manufacturing plant for the pipe is in Tulsa, OK, USA. The company also manufactures fittings and other components for this service at a plant in Shawnee, OK, USA"
  199. Pål Edvin J Olsen - Sertifikatutsteder - Finnmark Spesialavfall a.s - Email: |pejolsen@online.no| Tue Apr 08/97 08:30:49
    "Hello."
  200. Patrick Bailey - Metallurgical Engineering Tecnologist CGSB 48.9712 Level 2 MT,PT - - Email: |bladcede@idirect.com| Tue Apr 08/97 03:14:55
    "Interesting site .Definitely will visit again."
  201. A.C. Richardson - Engineer & C.E.O. - Inspectech - Email: |group@inspectech.ca| Mon Apr 07/97 19:43:26
    "Hello is all he wrote."
  202. james h daily jr - ndt engineer / inspector - BTB Inspection - Email: |jhdaily@ne.infi.net| Mon Apr 07/97 16:23:39
    "First time here. Looking for work. BSME, AAS in NDT, CWI, Level III / II UT, PT, MT, RT (film review) and databased project tracking. 502 862 4272"
  203. - - - Email: || Sat Apr 05/97 15:03:50
    "hello "
  204. Rod Law - Student - Embry Riddle Aeronautical University - Email: |RL756@aol.com| Sat Apr 05/97 05:51:23
    "hello, Browsed your page while looking for information about ultrasonic testing for airframes "
  205. - - KelownaFlightCraft Ltd. - Email: |dalebev@junction.net| Sat Apr 05/97 03:34:42
    "Hi there I'm just getting started with my computor. looking forward to networking with other NDT,rs"
  206. Frank J. Lehnerz - Sr. Q.A. Specialist - Oil Technology Services Inc. - Email: |vettster@prodigy.net| Fri Apr 04/97 23:37:07
    "Hello, Great web site. Glad to see some NDT material on the net."
  207. David Hall - Computer Dept. Supervisor - Longview Inspection - Email: |longview@lii-nde.com| Fri Apr 04/97 00:19:47
    "Nice to see something out there on UT"
  208. Peter Nienhuysen - Civ ing Level III UT - ABB-TRC - Email: |peter.nienhuysen@swipnet.se| Thu Apr 03/97 22:09:40
    "Hello "
  209. Richard Yu - Civil Engineer - stress-strain technology Sdn Bhd - Email: |yucl@tm.net.my| Thu Apr 03/97 01:14:02
    "hello, I have a ultrasonic testing job in Kuala Lumpur to check the condition of a large concrete diaphragm wall. The wall has a lot of honeycomb and quality problem. Anyone can help? I wish to buy the equipment for testing"
  210. David Novog - PhD Student - McMaster University - Email: |novogdr@mcmaster.ca| Wed Apr 02/97 20:51:18
    "hello"
  211. SHAWN S. DONAHO - NONDESTRUCTIVE INSPECTION TECHNICIAN - UNITED STATES MARINE CORPS - Email: |FIAN@AOL.COM| Wed Apr 02/97 09:37:59
    "HELLO I HAVE THREE YRS. EXPER. IN ET, RT, UT, MT, & LP. i GET OUT OFF THE SERVICE 23 FEB. 98 AND AM LOOKING FOR A JOB IN NDT. WILL SEND RESUME."
  212. SHAWN S. DONAHO - NONDESTRUCTIVE INSPECTION TECHNICIAN - UNITED STATES MARINE CORPS - Email: |FIAN@AOL.COM| Wed Apr 02/97 09:37:30
    "HELLO I HAVE THREE YRS. EXPER. IN ET, RT, UT, MT, & LP. i GET OUT OFF THE SERVICE 23 FEB. 98 AND AM LOOKING FOR A JOB IN NDT. WILL SEND RESUME."
  213. SHAWN S. DONAHO - NONDESTRUCTIVE INSPECTION TECHNICIAN - UNITED STATES MARINE CORPS - Email: |FIAN@AOL.COM| Wed Apr 02/97 09:31:51
    "HELLO"
  214. Kostas J. Kyriakopoulos - Professor - National Technical Univ. of Athens, Greece - Email: |kkyria@central.ntua.gr| Tue Apr 01/97 19:34:00
    "I hope to find information on books, articles and products on NDT."
  215. Toni Hakkarainen - NDT INSPECTOR - POLARTEST Oy - Email: |TONI.HAKKARAINEN@POLARTEST.FI| Tue Apr 01/97 14:08:12
    "HELLO SEE HTTP://WWW.POLARTEST.FI"
  216. Lance Macdonald - Rolls Technologist - BHP New Zealand Steel - Email: |Macdonald.Lance.L@bhp.com.au| Wed Mar 26/97 00:33:11
    "I am currently on a learning mission with respect to NDT. In particular ultrasonic testing of the various rolls we use in our rolling mills to produce our products."
  217. Stefan Medenbach - UT Level III - ABB ZAQ GmbH - Email: |SMedenbach@compuserve.com| Wed Mar 19/97 23:29:13
    "Hi, it is great, that it is possible to comunicate in this way with everybody on earth. "
  218. R. Dale Raley - Sr. Tech. Instructor / App. Lab Specialist - Krautkramer - Email: |draley@acsworld.net| Wed Mar 19/97 04:21:17
    "Hi! Cool place! Added this site to my bookmarks."
  219. Israel Vasquez - NDT / Quality Consultant - Vastek NDT & Quality Systems Consulting - Email: |Vastek@aol.com| Tue Mar 18/97 22:56:04
    "Thank you for allowing me to sign your guestbook. I would like to extend greetings to everyone involved in the Worldwide NDT/ NDE Community."
  220. Harm Riksen - Technical Assistent - Unilever - Email: |harm.riksen@unilever.com| Tue Mar 18/97 13:00:23
    "hello"
  221. Guy Macon - Engineer - Guy Macon Consulting - Email: |guymacon@deltanet.com| Tue Mar 18/97 03:14:45
    "Great site! I am an Electronics Engineer, and my wife is studying medical diagnostic sonography. It is good to see the equations behind the somewhat oversimplified information my wife gets. Having a good understanding the Physics will help me to help her. If anyone knows any other Ultrasound webpages, please email me. Searching on "Ultrasound" gets a lot of info on the Gravis Ultrasound PC soundcard... :("
  222. Andre Slawnyk - Reliability Engineer - Delphi Chassis Systems, Saginaw Operations - Email: |LNUSDC1.SZ1T5X@gmeds.com| Sun Mar 16/97 23:13:19
    " "