Page:
| 2001 v 34 n 7 | J. Makar, R. Desnoyers | Magnetic field techniques for the inspection of steel under concrete cover | pp 445-456
|
| 2001 v 34 n 7 | H.C. Park, D.-S. Kim | Evaluation of the dispersive phase and group velocities using harmonic wavelet transform | pp 457-467
|
| 2001 v 34 n 7 | A.C. Okafor, A. Dutta | Optimal ultrasonic pulse repetition rate for damage detection in plates using neural networks | pp 469-481
|
| 2001 v 34 n 7 | D.A. Cook, Y.H. Berthelot | Detection of small surface-breaking fatigue cracks in steel using scattering of Rayleigh waves | pp 483-492
|
| 2001 v 34 n 7 | S.H.H. Sadeghi, B. Toosi, R. Moini | On the suitability of induction coils for crack detection and sizing in metals by the surface magnetic field measurement technique | pp 493-504
|
| 2001 v 34 n 6 | S. Hattori, T. Shimada, K. Matsuhashi^b | Highly accurate low frequency elastic wave measurement using magnetostrictive devices | pp 373-379
|
| 2001 v 34 n 6 | S. Yuyama, Z.-W. Li, M. Yoshizawa, T. Tomokiyo, T. Uomoto | Evaluation of fatigue damage in reinforced concrete slab by acoustic emission | pp 381-387
|
| 2001 v 34 n 6 | H. Kaariainen, M. Rudolph, D. Schaurich, K. Tulla, H. Wiggenhauser | Moisture measurements in building materials with microwaves | pp 389-394
|
| 2001 v 34 n 6 | K. Iwaki, A. Hirama, K. Mitani, S. Kaise, K. Nakagawa | A quality control method for shotcrete strength by pneumatic pin penetration test | pp 395-402
|
| 2001 v 34 n 6 | M. Krause, F. Mielentz, B. Milman, W. Muller, V. Schmitz, H. Wiggenhauser | Ultrasonic imaging of concrete members using an array system | pp 403-408
|
| 2001 v 34 n 6 | S.G. Millard, D. Law, J.H. Bungey, J. Cairns | Environmental influences on linear polarisation corrosion rate measurement in reinforced concrete | pp 409-417
|
| 2001 v 34 n 6 | M.N. Soutsos, J.H. Bungey, S.G. Millard, M.R. Shaw, A. Patterson | Dielectric properties of concrete and their influence on radar testing | pp 419-425
|
| 2001 v 34 n 6 | I.L. Al-Qadi, S. Lahouar, A. Loulizi | In situ measurements of hot-mix asphalt dielectric properties | pp 427-434
|
| 2001 v 34 n 6 | M. Raupach, P. Schieszl | Macrocell sensor systems for monitoring of the corrosion risk of the reinforcement in concrete structures | pp 435-442
|
| 2001 v 34 n 5 | M.R. Clark, R. Gillespie, T. Kemp, D.M. McCann, M.C. Forde | Electromagnetic properties of railway ballast | pp 305-311
|
| 2001 v 34 n 5 | J.B. Santos, F. Perdigao | Automatic defects classification - a contribution | pp 313-318
|
| 2001 v 34 n 5 | J. Kim, L. Udpa, S. Udpa | Multi-stage adaptive noise cancellation for ultrasonic NDE | pp 319-328
|
| 2001 v 34 n 5 | A. Moropoulou, N.P. Avdelidis, M. Koui, K. Kakaras | An application of thermography for detection of delaminations in airport pavements | pp 329-335
|
| 2001 v 34 n 5 | M. Lindgren, T. Lepisto | Effect of prestraining on Barkhausen noise vs. stress relation | pp 337-344
|
| 2001 v 34 n 5 | E. Badel, P. Perre | Using a digital X-ray imaging device to measure the swelling coefficients of a group of wood cells | pp 345-353
|
| 2001 v 34 n 5 | M. Duquennoy, M. Ouaftouh, M.L. Qian, F. Jenot, M. Ourak | Ultrasonic characterization of residual stresses in steel rods using a laser line source and piezoelectric transducers | pp 355-362
|
| 2001 v 34 n 5 | Y. Le Bihan, P.-Y. Joubert, D. Placko | Wall thickness evaluation of single-crystal hollow blades by eddy current sensor | pp 363-368
|
| 2001 v 34 n 4 | D. Donskoy, A. Sutin, A. Ekimov | Nonlinear acoustic interaction on contact interfaces and its use for nondestructive testing | pp 231-238
|
| 2001 v 34 n 4 | K.E.-A. Van Den Abeele, A. Sutin, J. Carmeliet, P.A. Johnson | Micro-damage diagnostics using nonlinear elastic wave spectroscopy (NEWS) | pp 239-248
|
| 2001 v 34 n 4 | M. Castaings, B. Hosten | Lamb and SH waves generated and detected by air-coupled ultrasonic transducers in composite material plates | pp 249-258
|
| 2001 v 34 n 4 | R. Kazys, P. Stolpe | Ultrasonic non-destructive on-line estimation of the tensile stiffness of a running paper web | pp 259-267
|
| 2001 v 34 n 4 | N. Krohn, A. Dillenz, K. Nixdorf, R. Voit-Nitschmann, G. Busse | NDT of shape adaptive structures | pp 269-276
|
| 2001 v 34 n 4 | A. Mandelis | Diffusion-wave laser radiometric diagnostic quality-control technologies for materials NDE/NDT | pp 277-287
|
| 2001 v 34 n 4 | J. Degrieck, W. De Waele, P. Verleysen | Monitoring of fibre reinforced composites with embedded optical fibre Bragg sensors, with application to filament wound pressure vessels | pp 289-296
|
| 2001 v 34 n 4 | K.-W. Harbich, M.P. Hentschel, J. Schors | X-ray refraction characterization of non-metallic materials | pp 297-302
|
| 2001 v 34 n 3 | M. Hirao, H. Ogi, H. Yasui | Contactless measurement of bolt axial stress using a shear-wave electromagnetic acoustic transducer | pp 179-183
|
| 2001 v 34 n 3 | H. Jeong | Analysis of plate wave propagation in anisotropic laminates using a wavelet transform | pp 185-190
|
| 2001 v 34 n 3 | Y.-C. Lee, S.-P. Ko | Measuring dispersion curves of acoustic waves using PVDF line-focus transducers | pp 191-197
|
| 2001 v 34 n 3 | C.-H. Yang, C.J. Shue | Guided waves propagating in a piezoelectric plate immersed in a conductive fluid | pp 199-206
|
| 2001 v 34 n 3 | T. Yamasaki, S. Tamai, M. Hirao | Optimum excitation signal for long-range inspection of steel wires by longitudinal waves | pp 207-212
|
| 2001 v 34 n 3 | Y. Ju, M. Saka, H. Abe | Nondestructive inspection of delamination in IC packages by high-frequency microwaves | pp 213-217
|
| 2001 v 34 n 3 | P.-L. Liu, K.-H. Lee, T.-T. Wu, M.-K. Kuo | Scan of surface-opening cracks in reinforced concrete using transient elastic waves | pp 219-226
|
| 2000 v 34 n 2 | D.M. McCann, M.C. Forde | Review of NDT methods in the assessment of concrete and masonry structures | pp 71-84
|
| 2000 v 34 n 2 | C.K.Y. Leung | Fiber optic sensors in concrete: the future? | pp 85-94
|
| 2000 v 34 n 2 | D.W. Cullington, D. MacNeil, P. Paulson, J. Elliott | Continuous acoustic monitoring of grouted post-tensioned concrete bridges | pp 95-105
|
| 2000 v 34 n 2 | J. Martin, K.J. Broughton, A. Giannopolous, M.S.A. Hardy, M.C. Forde | Ultrasonic tomography of grouted duct post-tensioned reinforced concrete bridge beams | pp 107-113
|
| 2000 v 34 n 2 | Y.S. Cho, F.-B. Lin | Spectral analysis of surface wave response of multi-layer thin cement mortar slab structures with finite thickness | pp 115-122
|
| 2000 v 34 n 2 | L. Binda, A. Saisi, C. Tiraboschi | Application of sonic tests to the diagnosis of damaged and repaired structures | pp 123-138
|
| 2000 v 34 n 2 | C. Maierhofer, S. Leipold | Radar investigation of masonry structures | pp 139-147
|
| 2000 v 34 n 2 | D.J. Titman | Applications of thermography in non-destructive testing of structures | pp 149-154
|
| 2000 v 34 n 2 | P.D. Jackson, D.A. Gunn, R.C. Flint, D.M. McCann, M. Bent, D. Howes | Cross-hole seismic measurements for detection of disturbed ground beneath existing structures | pp 155-162
|
| 2000 v 34 n 2 | M.O. Gordon, M.S.A. Hardy, A. Giannopoulos | Semi-intrusive determination of ground penetrating radar wave velocity | pp 163-171
|
| 2000 v 33 n 8 | D. Braz, R.T. Lopes, L.M.G. da Motta | Computed tomography: evaluation of stability tests and indirect tensile strength of field asphaltic mixtures | pp 517-522
|
| 2000 v 33 n 8 | D.V. Rao, R. Cesareo, A. Brunetti, G.E. Gigante | Computed tomography with image intensifier: potential use for nondestructive testing and imaging of small objects | pp 523-530
|
| 2000 v 33 n 8 | K. Hwang, S. Mandayam, S.S. Udpa, L. Udpa, W. Lord, M. Atzal | Characterization of gas pipeline inspection signals using wavelet basis function neural networks | pp 531-545
|
| 2000 v 33 n 8 | M. Shamonin, T. Beuker, P. Rosen, M. Klank, O. Hagedorn, H. Dotsch | Feasibility of magneto-optic flaw visualization using thin garnet films | pp 547-553
|
| 2000 v 33 n 8 | K. Heller, L.J. Jacobs, J. Qu | Characterization of adhesive bond properties using Lamb waves | pp 555-563
|
| 2000 v 33 n 8 | M. Pieraccini, D. Tarchi, H. Rudolf, D. Leva, G. Luzi, G. Bartoli, C. Atzeni | Structural static testing by interferometric synthetic radar | pp 565-570
|
| 2000 v 33 n 7 | G. Dobmann | NDT modelling for the examination of welds | pp 439
|
| 2000 v 33 n 7 | A.S. Eriksson, J. Mattsson, A.J. Niklasson | Modelling of ultrasonic crack detection in anisotropic materials | pp 441-451
|
| 2000 v 33 n 7 | G. Bruggemann, A. Mahrle, T. Benziger | Comparison of experimental determined and numerical simulated temperature fields for quality assurance at laser beam welding of steels and aluminium alloyings | pp 453-463
|
| 2000 v 33 n 7 | K.J. Langenberg, R. Hannemann, T. Kaczorowski, R. Marklein, B. Koehler, C. Schurig, F. Walte | Application of modeling techniques for ultrasonic austenitic weld inspection | pp 465-480
|
| 2000 v 33 n 7 | G.-R. Tillack, C. Nockemann, C. Bellon | X-ray modeling for industrial applications | pp 481-488
|
| 2000 v 33 n 7 | H. Yamawaki, T. Saito | Numerical calculation of ultrasonic propagation with anisotropy | pp 489-497
|
| 2000 v 33 n 7 | A. Lhemery, P. Calmon, I. Lecoeur-Tabi, R. Raillon, L. Paradis | Modeling tools for ultrasonic inspection of welds | pp 499-513
|
| 2000 v 33 n 6 | T.-T. Wu, J.-H. Sun, J.-H. Tong | On the study of elastic wave scattering and Rayleigh wave velocity measurement of concrete with steel bar | pp 401-407
|
| 2000 v 33 n 6 | K.M. Abd El-Ghany, M.M. Farag | Expert system to automate the finite element analysis for non-destructive testing | pp 409-415
|
| 2000 v 33 n 6 | D. Ingman, Y. Michlin, L. Segal | Molar content dynamics measurements in interior spaces | pp 417-422
|
| 2000 v 33 n 6 | M. Lindgren, T. Lepisto | Application of a novel type Barkhausen noise sensor to continuous fatigue monitoring | pp 423-428
|
| 2000 v 33 n 6 | S.R. Ravishankar, C.R.L. Murthy | Application of acoustic emission in drilling of composite laminates | pp 429-435
|
| 2000 v 33 n 5 | S.D. Kwon, M.S. Choi, S.H. Lee | The applications of ultrasonic backward radiation from a layered substrate submerged in liquid | pp 275-281
|
| 2000 v 33 n 5 | P. Zinin, M.H. Manghnani, Y.C. Wang, R.A. Livingston | Detection of cracks in concrete composites using acoustic microscopy | pp 283-287
|
| 2000 v 33 n 5 | J. Philip, C.B. Rao, T. Jayakumar, B. Raj | A new optical technique for detection of defects in ferromagnetic materials and components | pp 289-295
|
| 2000 v 33 n 5 | N.N. Kishore, I. Sridhar, N.G.R. Iyengar | Finite element modelling of the scattering of ultrasonic waves by isolated flaws | pp 297-305
|
| 2000 v 33 n 5 | S. Vallerand, X. Maldague | Defect characterization in pulsed thermography: a statistical method compared with Kohonen and Perceptron neural networks | pp 307-315
|
| 2000 v 33 n 5 | K. Chen, F.P. Brennan, W.D. Dover | Thin-skin AC field in anisotropic rectangular bar and ACPD stress measurement | pp 317-323
|
| 2000 v 33 n 5 | J.P.O. Evans, M. Robinson | Design of a stereoscopic X-ray imaging system using a single X-ray source | pp 325-332
|
| 2000 v 33 n 5 | M. Katoh, K. Nishio, T. Yamaguchi | FEM study on the influence of air gap and specimen thickness on the detectability of flaw in the yoke method | pp 333-339
|
| 2000 v 33 n 5 | S.R. Ravishankar, C.R.L. Murthy | Characteristics of AE signals obtained during drilling composite laminates | pp 341-348
|
| 2000 v 33 n 5 | T. Uomoto | Non-Destructive Testing In Civil Engineering 2000 |
|
| 2000 v 33 n 4 | R Sabet-Sharghi, L Clapham, DL Atherton | Effect of defect introduction vs. load application sequencing on defect-induced stress distributions in steel | 201-212
|
| 2000 v 33 n 4 | Z Yan, PB Nagy | Thermo-optical modulation for improved ultrasonic fatigue crack detection in Ti-6Al-4V | 213-223
|
| 2000 v 33 n 4 | Z Li, YH Berthelot | Propagation of transient ultrasound in thick angular waveguides: modeling, experiments, and application | 225-232
|
| 2000 v 33 n 4 | SUNGJIN Song, YOUNGKIL Shin | Eddy current flaw characterization in tubes by neural networks and finite element modeling. | 233-243
|
| 2000 v 33 n 4 | R Murayama | Nondestructive evaluation of formability in thin steel sheets using fundamental lamb wave | 245-251
|
| 2000 v 33 n 4 | P Palanichamy, M Vasudevan, T Jayakumar, S Venugopal, B Raj | Ultrasonic velocity measurements for characterizing the annealing behaviour of cold worked Austenitic stainless steel | 253-259
|
| 2000 v 33 n 4 | SR Ahmed, M Saka | A new ultrasonic angle-beam technique for sensitive evaluation of closed cracks | 261-271
|
| 2000 v 33 n 3 | GANG Qi | Wavelet-based AE characterization of composite materials | 133-144
|
| 2000 v 33 n 3 | CK Jen, JG Legoux, L Parent | Experimental evaluation of clad metallic buffer rods for high-temperature ultrasonic measurements | 145-153
|
| 2000 v 33 n 3 | M Spies | Modeling of transducer fields in inhomogeneous anisotropic materials using Gaussian beam superposition | 155-162
|
| 2000 v 33 n 3 | F Roper | A high frequency eddy current method for the thickness measurement of thin metallic foils using ferrite-core transmission systems | 163-172
|
| 2000 v 33 n 3 | HIROAKI Suzuki, TETSUO Kinjo, NAOYA Saito, MIKIO Takemoto, KANJI Ono | Integrity evaluation of glass fiber composites with varied fiber-matrix interfacial strength using acoustic emission. | 173-180
|
| 2000 v 33 n 3 | CR Coughlin, L Clapham, DL Atherton | Effects of stress on MFL responses from elogated corrosion pits in pipeline steel | 181-188
|
| 2000 v 33 n 3 | L Azar, Y Shi, SC Wooh | Beam focusing behaviour of linear phased arrays | 189-198
|
| 2000 v 33 n 2 | BT Fernandes, I Silva, PA Gaydecki | Vector extraction from digital images of steel bars produced by an inductive scanning system using a differential gradient method combined with a modified Hough transform | 69-75
|
| 2000 v 33 n 2 | JN Karadelis | A numerical model for the computation of concrete pavement moduli. -A non destructive testing and assessment method | 77-84
|
| 2000 v 33 n 2 | R Ciocan, P Petculescu, D Ciobanu, DJ Roth | The use of the neural networks in the recognition of the austenitic steel types | 85-89
|
| 2000 v 33 n 2 | MEDO Si-Chaib, H Djelouah, M Bocquet | NDE Applications of ultrasonic reflection mode conversion transducers in | 91-99
|
| 2000 v 33 n 2 | YOSHIHIRO Mizutani, KENJI Nagashima, MIKIO Takemoto, KANJI Ono | Fracture mechanism characterization of cross-ply carbon-fiber composites using acoustic emission analysis. | 101-110
|
| 2000 v 33 n 2 | KJ Stevens | Stress dependence of ferromagnetic hysteresis loops for two grades of steel | 111-121
|
| 2000 v 33 n 2 | M Rath, J Doring, W Stark, G Hinrichsen | Process monitoring of moulding compounds by ultrasonic measurements in a compression mould | 123-130
|
| 1999 v 33 n 1 | T Gudra, B Stawiski | Non-destructive strength characterization of concrete using surface waves | 1-6
|
| 1999 v 33 n 1 | LFM Silva, JPM Goncalves, FMF Oliveira, PMST De Castro | Applicability of the spate technique to the detection of hidden cracks | 7-13
|
| 1999 v 33 n 1 | DW Law, SG Millard, JH Bungey | Linear polarisation resistance measurements using a potentiostatically controlled guard ring | 15-21
|
| 1999 v 33 n 1 | P Duvauchelle, G Peix, D Babot | Rayleigh to compton ratio computed tomography using synchrotron radiation | 23-31
|
| 1999 v 33 n 1 | A Zerwer, MA Polak, JC Santamarina | Wave propagation in think Plexiglas plates: Implications for Rayleigh waves | 33-41
|
| 1999 v 33 n 1 | Pravesh Kumar, GVS Murthy | Ultrasonic evaluation of double pored rolls | 43-45
|
| 1999 v 33 n 1 | F Lingvall, T Stepinski | Automatic detecting and classifying defects during eddy current inspection of riveted lap-joints | 47-55
|
| 1999 v 33 n 1 | S Mukhopadhyay, GP Srivastava | Characterisation of metal loss defects from magnetic flux leakage signals with discrete wavelet transform | 57-65
|
| 1999 v 32 n 8 | A Massel | Power spectrum analysis - modern tool in the study of rail surface corrugations | 429-436
|
| 1999 v 32 n 8 | A Mandelis, M Munidasa, L Nicolaides | Laser infrared photothermal radiometric depth profilometry of steels and its potential in rail track evaluation | 437-443
|
| 1999 v 32 n 8 | A Barylski, W Koc, A Wilk | Longitudinal forces in raiway track and tamping machine shifting sets | 445-455
|
| 1999 v 32 n 8 | R Jack, P Jackson | Imaging attributes of railway track formation and ballast using ground probing radar (GPR) | 457-462
|
| 1999 v 32 n 8 | GP Gallagher, Q Leiper, R Williamson, MR Clark, MC Forde | The application of time domain ground penetrating radar to evaluate railway track ballast | 463-468
|
| 1999 v 32 n 8 | RC Flint, PD Jackson, DM Mccann | Geophysical imaging inside masonry structures | 469-479
|
| 1999 v 32 n 8 | DM Mccann, MC Forde, MR Clark, KJ Broughton, PJ Fenning, A Brown | Radar measurement of bridge scour | 481-492
|
| 1999 v32 n 7 | L Segal | Diagnostic method for vehicle brakes | 369-373
|
| 1999 v32 n 7 | C Hsiao, Y Lin, C Chang | Nondestructive evaluation of concrete quality and integrity in composite columns | 375-382
|
| 1999 v32 n 7 | J Lewandowski | Determination of material parameters and texture of a polycrystalline aggregate from ultrasonic measurements | 383-396
|
| 1999 v32 n 7 | I Matiss | New possibilities of increasing accuracy for nondestructive testing. Part-1. Basic principles and application examples | 397-401
|
| 1999 v32 n 7 | I Matiss, Y Rotbakh | New possibilities of increasing accuracy for nondestructive testing.Part-2. Data processing algorithms | 403-408
|
| 1999 v32 n 7 | I Matiss, Y Rotbakh | New possibilities of increasing accuracy for nondestructive testing. Part-3. Approximation algorithms and accuracy tests | 409-413
|
| 1999 v32 n 7 | R Latif | Determination of the group and phase velocities from time-frequency representation of wigner ville | 415-422
|
| 1999 v32 n 6 | M Surgeon, M Wevers | Modal analysis of acoustic emission signals from CFRP laminates | 311-322
|
| 1999 v32 n 6 | L Goglio, M Rossetto | Ultrasonic testing of adhesive bonds of thin metal sheets | 323-331
|
| 1999 v32 n 6 | C Santulli, AC Lucia | Relation between acoustic emission analysis during cure cycle and bonded joints performances | 333-341
|
| 1999 v32 n 6 | A Bensalem, H Ali-Ahmed, CA Fairfield, A Sibbald | NDT to detect voids hidden behind the extrados of an arch bridge | 343-353
|
| 1999 v32 n 6 | L Shen, H Kato | Influences of tensile direction and plastic strain on ultrasonic parameters measured with rolled brass plates | 355-361
|
| 1999 v 32 n 5 | T Inagaki, T Ishii, T Iwamoto | On the NDE for the diagnosing of defects using infrared thermography | 247-257
|
| 1999 v 32 n 5 | Y Ju, M Saka, H Abe | Microwave nondestructive detection of delamination in IC packages utilizing open-ended coaxial line sensor | 259-264
|
| 1999 v 32 n 5 | D Shan, H Nayeb-Hashemi | Fatigue-life prediction of SiC aluminium composite using a Weibull model | 265-274
|
| 1999 v 32 n 5 | SE Kruger, JMA Rebello, PC De Camargo | Hydrogen damage detection by ultrasonic spectral analysis | 275-281
|
| 1999 v 32 n 5 | XE Gros, J Bousigue, K Takahashi | NDT data fusion at pixel level | 283-292
|
| 1999 v 32 n 5 | JW Liaw, SL Chu, CS Yeh, MK Kuo | Analysis eddy currents in a bar containing an embedded defect | 293-303
|
| 1999 v 32 n 5 | No Author | Society journals digest | 305-307
|
| 1999 v 32 n 4 | M Duquennoy, M Ouaftouh, M Ourak | Ultrasonic evaluation of stresses in orthotropic materials using Rayleigh waves | 189-199
|
| 1999 v 32 n 4 | V Schmitz, F Walte, SV Chakhlov | 3D ray tracing in austenite materials | 201-213
|
| 1999 v 32 n 4 | W Yi, W Jingjin, W Kuilu, L Guozhi, Z Guofu, Z Yuanlin, D Hongliang | Portable pulsed electronic digital x-ray imager | 215-218
|
| 1999 v 32 n 4 | M Nishida, T Endo, T Adachi, H Matsumoto | An acoustic lens to measure wave velocities with the complex V(z) curve method | 219-224
|
| 1999 v 32 n 4 | F Moser, LJ Jacobs, J Qu | Modeling elastic wave propagation in waveguides with the finite element method | 225-234
|
| 1999 v 32 n 4 | R Hill | Book review - Progress in quantitative nondestructive evaluation Volumes 17A and 17B | 235-235
|
| 1999 v 32 n 4 | No Author | Society Journals Digest | 237-241
|
| 1999 v 32 n 4 | No Author | JSNDI abstracts | 243-244
|
| 1999 v 32 n 3 | K Ogawa, D Minkov, T Shoji, M Sato, H Hashimoto | NDE of degradation of thermal barrier coating by means of impedance spectroscopy | 177-185
|
| 1999 v 32 n 3 | BC Morgan, R Tilley | Inspection of power plant headers utilizing acoustic emission monitoring | 167-175
|
| 1999 v 32 n 3 | T Mihara, G Suzuki, A Harazono, T Ikuno | Fatigue damage monitoring of round shape specimen by acoustic microscopy | 161-166
|
| 1999 v 32 n 3 | OY Kwon, SH Lee | Acousto-ultrasonic evaluation of adhesively bonded CFRP-aluminium joints | 153-160
|
| 1999 v 32 n 3 | M Katoh, K Nishio, T Yamaguchi | Study on demagnetizing field in coil method using FEM | 147-152
|
| 1999 v 32 n 3 | A Kato, M Hayashi | Fatigue life estimation of steel using laser speckle sensor | 139-145
|
| 1999 v 32 n 3 | T Hoshimiya | Nondestructive evaluation of surface defects under dry/wet environment by the use of photoacoustic and photothermal electrochemical imaging | 133-137
|
| 1999 v 32 n 3 | M Hirao, H Ogi | An SH-wave EMAT technique for gas pipeline inspection | 127-132
|
| 1999 v 32 n 3 | XE Gros | Editorial for NDT&E international special issue on 9th Asia-Pacific conference | 125-125
|
| 1998 v 32 n 2 | No Author | JSNDI Abstracts | 119-121
|
| 1998 v 32 n 2 | No Author | Society Journals Digest | 111-118
|
| 1998 v 32 n 2 | R Hill | Book review: Electrical and magnetic methods of non-destructive testing, second edition, Jack Blitz | 109-109
|
| 1998 v 32 n 2 | I Cornwell, A Mcnab | Towards automated interpretation of ultrasonic NDT data | 101-107
|
| 1998 v 32 n 2 | MA Mahmoud, MA Abu Kiefa | Neural network solution of the inverse vibration problem | 91-99
|
| 1998 v 32 n 2 | B Ahn, SS Lee, ST Hong, HC Kim, SJL Kang | Application of the acoustic resonance method to evaluate the grain size of low carbon steels | 85-89
|
| 1998 v 32 n 2 | J Moysan, G Corneloup, T Sollier | Adapting an ultrasonic image threshold method to eddy current images and defining a validation domain of the thresholding method | 79-84
|
| 1998 v 32 n 2 | D Tescione, P Maddalena | A new technique for calibration in frequency of piezoelectric transducers | 71-77
|
| 1998 v 32 n 2 | T Kundu, M Ehsani, KI Maslov, D Guo | C-scan and L-scan generated images of the concrete / GFRP composite interface | 61-69
|
| 1998 v 32 n 1 | No Author | JSNDI abstracts | 57-58
|
| 1998 v 32 n 1 | No Author | Society journals digest | 49-55
|
| 1998 v 32 n 1 | ML Peterson, RM Gutkowski | Evaluation of the structural integrity of timber bridges | 43-48
|
| 1998 v 32 n 1 | JS Brenizer, B Hosticka, H Berger, GT Gillies | The use of contrast agents to enhance crack detection via neutron radiography | 37-42
|
| 1998 v 32 n 1 | Z Chen, K Miya | Rapid prediction of eddy current testing signals using A - o method and database | 29-36
|
| 1998 v 32 n 1 | Y Hayashi, S Ogawa, H Cho, M Takemoto | Non-contact estimation of thickness and elastic properties of metallic foils by the wavelet transform of laser generated lamb waves | 21-27
|
| 1998 v 32 n 1 | ST Kang, HS Cho | A projection method for reconstructing x-ray images of arbitrary cross-section | 9-20
|
| 1998 v 32 n 1 | RK Miller, AA Pollock, DJ Watts, JM Carlyle, AN Tafuir, JJ Yezzi Jr | A reference standard for the development of acoustic emission pipeline leak detection techniques | 1-8
|
| 1998 v 31 n 6 | GJ Weil, TJ Rowe | Nondestructive testing and repair of the concrete roof shell at the Seattle Kingdome | 389-400
|
| 1998 v 31 n 6 | RD Owen | Portable linear accelerators for x-ray and electron beam applications in civil engineering | 401-409
|
| 1998 v 31 n 6 | L Binda, G Lenzi, A Saisi | NDE of masonry structures: use of radar test for the characterisation of stone masonries | 411-419
|
| 1998 v 31 n 6 | C Maierhofer, M Krause, H Wiggenhauser | Non-destructive investigations of sluices using radar and ultrasonic impulse echo | 421-427
|
| 1998 v 31 n 6 | MO Gordon, K Broughton, MSA Hardy | The assessment of the value of GPR imaging of flexible pavements | 429-438
|
| 1998 v 31 n 6 | C Colla, CD Burnside, MR Clark, KJ Broughton, MD Forde | Comparison of laboratory and simulated data for radar image interpretation | 439-444
|
| 1998 v 31 n 5 | D Minkov, T Shoji | Method for sizing of 3-D surface breaking flaws by leakage flux | 317-324
|
| 1998 v 31 n 5 | M Saka, I Sato, H Abe | NDE of a 3-D surface crack using magnetic field induced by D.C. current flow | 325-328
|
| 1998 v 31 n 5 | techniques on AE signals | Damage characterization of carbon/carbon laminates using neural network | 329-340
|
| 1998 v 31 n 5 | J Jaglarz, M Nowak | New technique of VAR investigations on thin films on thick substrates | 341-347
|
| 1998 v 31 n 5 | MD Pandey | Probalistic models for condition assessment of oil and gas pipelines | 349-358
|
| 1998 v 31 n 5 | MV Hosur, CRL Murthy, TS Ramamurthy, A Shet | Estimation of impact induced damage in CFRP laminates through ultrasonic imaging | 359-374
|
| 1998 v 31 n 4 | D Minkov, T Shoji | Method for sizing of 3-D surface breaking flaws by leakage flux | 317-324
|
| 1998 v 31 n 4 | M Saka, I Sato, H Abe | NDE of a 3-D surface crack using magnetic field induced by D.C. current flow | 325-328
|
| 1998 v 31 n 4 | TP Philippidis, VN Nikolaidis, AA Anastassopoulos | Damage characterization of carbon/carbon laminates using neural networktechniques on AE signals | 329-340
|
| 1998 v 31 n 4 | J Jaglarz, M Nowak | New technique of VAR investigations on thin films on thick substrates | 341-347
|
| 1998 v 31 n 4 | MD Pandey | Probalistic models for condition assessment of oil and gas pipelines | 349-358
|
| 1998 v 31 n 4 | MV Hosur, CRL Murthy, TS Ramamurthy, A Shet | Estimation of impact induced damage in CFRP laminates through ultrasonic imaging | 359-374
|
| 1998 v 31 n 3 | YZ Pappas, YP Markopoulos, V Kostopoulos | Failure mechanisms analysis of 2D carbon/carbon using acoustic emissionmonitoring | 157-163
|
| 1998 v 31 n 3 | RJ Ball, DP Almond | The detection and measurement of impact damage in thick carbon fibre reinforcedlaminates by transient thermography | 165-173
|
| 1998 v 31 n 3 | A Cheng, W Deutsch | Characterization of diffusion bonds of titanium plates using transmittedultrasonic signals. | 175-182
|
| 1998 v 31 n 3 | TW Warren Liao, Y Li | An automated radiographic NDT system for weld inspection: Part II - flawdetection | 183-192
|
| 1998 v 31 n 3 | U Bulubay, AB Tugrul | Quantitative evaluation of intensifying screen materials in Co-60 radiographyfor steel parts | 193-199
|
| 1998 v 31 n 3 | M Fukuhara, Y Kuwano | Propagation characteristics of SH ultrasonic waves through the surface depth ofan isotropic medium. | 201-210
|
| 1998 v 31 n 3 | M Fukuhara, Y Kuwano, K Saito, T Hirasawa, I Komura | Perfromance of non-destructive evaluation by diffracted SH ultrasonic waves inpredicting degree of fatigue in cyclic bending of ferritic steel | 211-216
|
| 1998 v 31 n 2 | M Kurita, Y Ma | Strain measurement by diffraction grating method. | 77-83
|
| 1998 v 31 n 2 | E Lafond, R Coulette, C Grand, MH Nadal, B Dupont, F Lepoutre, D Balageas, O Petillon | Application of a two-layer semi-analytical model for the improvement of laser-ultrasonic generation | 85-92
|
| 1998 v 31 n 2 | MA Rodriguez, R Miralles, L Vergara | Signal processing for ultrasonic non-destructive evaluation: two applications | 93-97
|
| 1998 v 31 n 2 | HA Jama, EMA Hussein, P Lee-Sullivan | Detection of debonding in composite-Aluminum joints using Gamma-ray compton scattering | 99-103
|
| 1998 v 31 n 2 | M Kepinska, M Novak | Comparison of optical constants and average thickness of inhomogeneous-rough thin films obtained from spectral dependences of optical transmittance and reflectance | 105-110
|
| 1998 v 31 n 2 | T Iosefzon-Schwierz, A Notea | Optimization of geometrical characteristics and image intensifier response in microfocus radiographic system | 111-115
|
| 1998 v 31 n 2 | JM Makar, BK Tanner | The effect of stresses approaching and exceeding the yield point on the magnetic properties of high strength pearlitic steels | 117-127
|
| 1998 v 31 n 1 | Rantala, J., Wu, D., Busse, G. | NDT of polymer materials using lock-in thermography with water-coupled ultrasonic excitation. | 43
|
| 1998 v 31 n 1 | Holmstrom, J. E. | Exposure values for a 300 kV halfwave X-ray unit using three X-ray films of different film classes. Part II: Welded steel plate thicknesses below 10mm. | 33
|
| 1998 v 31 n 1 | Gauthier, J., Krause, T. W., Atherton, D. L. | Measurement of residual stress in steel using the magnetic Barkhausen noise technique. | 23
|
| 1998 v 31 n 1 | Ferreira de Paiva, R., Lynch, J., Bisiaux, M. | A beam hardening correction for X-ray microtomography. | 17
|
| 1998 v 31 n 1 | Wilcox, P.D., Monkhouse, R.S.C., Auld, B.A. | Development of a computer model for an ultrasonic polymer film transducer system. | 51
|
| 1998 v 31 n 1 | Doyum, A. Bulent, Ertekin, S. | A practical hole testing technique using a meter display eddy current instrument. | 11
|
| 1998 v 31 n 1 | Chen, S., Nagy, P. B. | Edge weld penetration assessment using the potential drop technique. | 1
|