NDTnet Forum: Message Board Archive 2002

NDTnet Forum - Message Board Archive 2002
2001 - 2000 - 1999 - 1998

inspection methode(eddy current) - chelouh 19:51 12/28/2002
repair of x ray machine - S S Ananthan 08:39 12/27/2002
- Re: repair of x ray machine - anil jain 18:52 12/28/2002
Bullet Proof Web Hosting - mike 07:52 12/26/2002
x-ray of 42" welded joint - paresh 07:47 12/26/2002
- Re: x-ray of 42" welded joint - Ed Trotter 07:22 12/27/2002
  - x-ray of 42" welded joint - paresh 07:52 12/27/2002
    - Re: x-ray of 42" welded joint - Ed T. 04:29 12/28/2002
      - Re: x-ray of 42" welded joint - Ed Ginzel 15:47 12/28/2002
        
        Re: x-ray of 42" welded joint - Ed Trotter 13:04 12/29/2002
looking for UT , Gamma ray projector,MT used equipment - Mohamed El-sawy 19:19 12/23/2002
Inconel / Stainless Cladding Measurement - Doug Breeze 00:04 12/23/2002
Detection of Linear indications - K. Anandm 09:05 12/22/2002
- Re: Detection of Linear indications - Ed Trotter 09:13 12/23/2002
Piëzo-electric detection of Shear-waves - T. Idzenga 13:04 12/20/2002
- Re: Piëzo-electric detection of Shear-waves - Herman Schoorlemmer 08:57 12/24/2002
- Re: Piëzo-electric detection of Shear-waves - Paul A. Meyer 16:03 12/23/2002
Thickness Gauge (PJG) - James JOE 23:29 12/17/2002
- Re: Thickness Gauge (PJG) - Neil Burleigh 06:02 12/18/2002
  - Re: Thickness Gauge (PJG) - Joe Buckley, Sonatest PLc 09:16 12/18/2002
    - Re: Thickness Gauge (PJG) - David Hermanutz 12:21 1/09/2003
Taking thickness readings on FRP material. - K Fosha 22:14 12/17/2002
- Re: Taking thickness readings on FRP material. - Neil Burleigh 06:28 12/18/2002
ndi point papers - FRANKIE YAWN 21:49 12/17/2002
U/T rep rate - Terry White 14:29 12/17/2002
- Re: U/T rep rate - Udo Schlengermann 16:46 12/17/2002
Overlay/Cladding thickness - K. Anandam 12:31 12/17/2002
- Re: Overlay/Cladding thickness - JDM 13:34 12/19/2002
- Re: Overlay/Cladding thickness - Richard Kazares 17:48 12/17/2002
  - Re: Overlay/Cladding thickness - Randy Plis 19:30 12/17/2002
    - Re: Overlay/Cladding thickness - Neil Burleigh 06:48 12/18/2002
- Resistivity for NDT of Overlay/Cladding Thickness - Sean S. Franklin 15:40 12/17/2002
- Re: Overlay/Cladding thickness - Joe Buckley, Sonatest PLc 13:01 12/17/2002
  - Re: Overlay/Cladding thickness - Juraj Neupauer 13:21 12/17/2002
polaroid ultrasonic sensors - Phil 06:03 12/17/2002
- Re: polaroid ultrasonic sensors - Joerg Schulze-Clewing 22:50 12/18/2002
Condition monitoring - Sampath 12:19 12/16/2002
- Re: Condition monitoring - rodney.fordham 23:29 12/16/2002
resistivity test for quality of tube welds - arun kumar 02:43 12/16/2002
- Re: resistivity test for quality of tube welds - Sean S. Franklin 23:56 12/16/2002
- Re: resistivity test for quality of tube welds - John Hansen 10:30 12/16/2002
Phased Arrays - Stefan Hartmann 11:38 12/13/2002
- Re: Phased Arrays - Joerg Schulze-Clewing 21:41 12/18/2002
- Re: Phased Arrays - Paul A. Meyer 19:13 12/16/2002
- Re: Phased Arrays - Jeff Leak 17:22 12/16/2002
- Re: Phased Arrays - Cliff Rawlinson 16:37 12/14/2002
- Re: Phased Arrays - M. Anderson 22:31 12/13/2002
EMAT device - Cesar Boynard 17:09 12/12/2002
- Re: EMAT device - Cesar Boynard 12:47 12/13/2002
- Re: EMAT device - Joe Buckley, Sonatest PLc 18:10 12/12/2002
  - Re: EMAT device - Cesar Boynard 18:29 12/12/2002
- Re: EMAT device - Borja Lopez 17:29 12/12/2002
  - Re: EMAT device - Cesar Boynard 17:57 12/12/2002
  - Re: EMAT device - Grant Gordon 17:55 12/12/2002
    - Re: EMAT device - Cesar Boynard 18:25 12/12/2002
certification courses - Sanjay 15:03 12/12/2002
NDT Classified ads - Mike 18:05 12/11/2002
- Re: NDT Classified ads - Rolf Diederichs 07:55 12/12/2002
four point probe resistivity measurement - arun kumar 17:37 12/11/2002
- Re: four point probe resistivity measurement - Sean S. Franklin 18:31 12/11/2002
Thickness Meter to Mount on Crawler - Gary Woodside 13:18 12/11/2002
microfocus x-ray - fabio mussa 12:10 12/10/2002
- Re: microfocus x-ray - CANTORE CLAUDIO 09:52 12/11/2002
NADCAP Certified UT Subcontractor - Rainer Dicken 09:53 12/10/2002
- Re: NADCAP Certified UT Subcontractor - Matt Clark 18:31 12/13/2002
Marine Piles - Suszanne Thwaites 08:09 12/10/2002
- Re: Marine Piles - Allen Green 19:41 12/10/2002
DFT on Fiberglass - Joel A. Light 00:36 12/10/2002
seeking information about rail weld testing - tu zhankuan 11:43 12/09/2002
- Re: seeking information about rail weld testing - Ilya Etingen 13:18 12/11/2002
- Re: seeking information about rail weld testing - Peter Philipp 15:25 12/09/2002
ACCP Grandfathering - Frederick E. Raco, Jr. 01:53 12/09/2002
- Re: ACCP Grandfathering - David Davies 06:48 12/09/2002
- Re: ACCP Grandfathering - William Cook 04:37 12/09/2002
  - Re: ACCP Grandfathering - Daniel Hieronymus 16:27 12/09/2002
  - Re: ACCP Grandfathering - David Davies 10:40 12/09/2002
Non-contact ultrasonic systems - Neil Gibson 21:44 12/08/2002
- Re: Non-contact ultrasonic systems - Edward Fisher 02:16 12/09/2002
- Re: Non-contact ultrasonic systems - Franc Buijsen 21:55 12/08/2002
Needing IRthv criterea when at HV aerial inspection - Jaques 22:42 12/07/2002
NDT.net December Issue - Rolf Diederichs 09:15 12/06/2002
Accepting cluster pores - S S Ananthan 08:53 12/06/2002
- Re: Accepting cluster pores - Nick Welland 13:36 12/06/2002
- Re: Accepting cluster pores - John Woollven 13:30 12/06/2002
  - Re: Accepting cluster pores - Scott Longstreet 13:49 12/06/2002
    - Re: Accepting cluster pores - Juan Amado 14:33 12/06/2002
      - Re: Accepting cluster pores - S.V.Swamy 10:10 12/09/2002
Rytense 44 (1144) - Kevin F 16:51 12/05/2002
- Re: Rytense 44 (1144) - Christoph Schnitger 18:12 12/05/2002
Helium Leak Test vs Hydrostatic Test - Dent McIntyre 15:46 12/04/2002
- Re: Helium Leak Test vs Hydrostatic Test - Kamola Zygmunt 17:31 12/31/2002
- Re: Helium Leak Test vs Hydrostatic Test - Matthias Block 14:16 12/06/2002
- Re: Helium Leak Test vs Hydrostatic Test - Jim Knowles 10:33 12/05/2002
  - Re: Helium Leak Test vs Hydrostatic Test - Dent McIntyre 14:55 12/05/2002
    - Re: Helium Leak Test vs Hydrostatic Test - S.V.Swamy 09:17 12/09/2002
- Re: Helium Leak Test vs Hydrostatic Test - James 17:17 12/04/2002
measuring crack depth - Damir Markucic 14:53 12/04/2002
- Re: measuring crack depth - Phil Thayer 15:08 12/04/2002
Online-Wallthickness-Monitoring on hot tubes - Stefan Hartmann 14:47 12/04/2002
- Re: Online-Wallthickness-Monitoring on hot tubes - Leif Jeppesen 13:18 12/05/2002
- Re: Online-Wallthickness-Monitoring on hot tubes - Pim van Andel 10:46 12/05/2002
Responds to my own post - Elvis Pina 01:10 12/04/2002
- Any work in Brazil? - William 17:06 12/04/2002
Help on Magnetic Sensors with very high resolution - Weihua Mao 18:07 12/03/2002
ultrasonic lights - FRANKIE YAWN 22:17 12/02/2002
- Re: ultrasonic lights - David Smart 22:39 12/02/2002
Automated ultrasonic testing for welded pipe joints - R.J.Chaudhari 09:59 12/02/2002
- Re: Automated ultrasonic testing for welded pipe joints - Lee Deng 05:24 12/05/2002
  - Automated ultrasonic testing for welded pipe joints - R.J.Chaudhari 09:45 12/06/2002
- Re: Automated ultrasonic testing for welded pipe joints - Randy Plis 18:27 12/03/2002
- Re: Automated ultrasonic testing for welded pipe joints - Ed Ginzel 16:35 12/03/2002
- Re: Automated ultrasonic testing for welded pipe joints - Dr. Yamani, A. 21:23 12/02/2002
  - Re: Automated ultrasonic testing for welded pipe joints - Richard Kazares 00:04 12/03/2002
  - Re: Automated ultrasonic testing for welded pipe joints - Richard D. Finlayson 21:36 12/02/2002
    - Re: Automated ultrasonic testing for welded pipe joints - Ed Trotter 05:39 12/04/2002
seeking some information about accoustic emissiom detector - Wang Hairong 09:18 12/02/2002
- Re: seeking some information about accoustic emissiom detector - Kamola Zygmunt 17:32 12/31/2002
  - Re: seeking some information about accoustic emissiom detector - Dr. Shigenori Yuyama 06:42 1/01/2003
  - Re: seeking some information about accoustic emissiom detector - Dr.Sotirios J. Vahaviolos 19:10 12/31/2002
- Re: seeking some information about accoustic emissiom detector - Athanasios Anastasopoulos 15:19 12/05/2002
- Re: seeking some information about accoustic emissiom detector - Alexandros Chrissochou 10:18 12/02/2002
  - Re: seeking some information about accoustic emissiom detector - Robert Paynter 11:05 12/02/2002
    - Re: seeking some information about accoustic emissiom detector - Dr.Sotirios J. Vahaviolos 13:59 12/02/2002
attenuation coefficient - nihat 15:14 11/29/2002
ET+UT system - James JOE 08:47 11/28/2002
- Re: ET+UT system (Eddy current system) - LMQ 00:33 12/04/2002
- Re: ET+UT system (Eddy current system) - LMQ 00:30 12/04/2002
seeking interface for epoch 3 2300 - chelouh abdenour 10:41 11/27/2002
- Re: seeking interface for epoch 3 2300 - Bill Chestnut 09:36 11/29/2002
IR Thermography - zaki 09:19 11/27/2002
- Re: IR Thermography - Alberto Monici 09:55 11/27/2002
  - Re: IR Thermography - Robert Paynter 11:33 12/02/2002
Automated UT Systems - Ram Iyengar 08:48 11/27/2002
NDT Training Slides - Mike Trinidad 14:04 11/26/2002
project: acoustic testing of metal/rails - SEAN LEYLAND 13:29 11/25/2002
- Re: project: acoustic testing of metal/rails - Ingolf Hertlin 19:12 11/25/2002
- Re: project: acoustic testing of metal/rails - John Hansen 18:14 11/25/2002
Automated NDT Systems - Hemant 10:27 11/25/2002
Color palettes for C-scan presentation - David Harvey 19:03 11/24/2002
- Re: Color palettes for C-scan presentation - Tim MacInnis 21:10 11/25/2002
  - Re: Color palettes for C-scan presentation - David Harvey 21:42 11/25/2002
    - Re: Color palettes for C-scan presentation - Tim MacInnis 14:19 11/26/2002
- Re: Color palettes for C-scan presentation - Joe Buckley, Sonatest PLc 20:18 11/24/2002
Liquid Level in Halon Bottles - Tim Heimel 17:27 11/22/2002
- Re: Liquid Level in Halon Bottles - John Pursley 22:18 11/22/2002
- Re: Liquid Level in Halon Bottles - Jim Knowles 17:49 11/22/2002
  - Re: Liquid Level in Halon Bottles - Tim Heimel 15:42 11/23/2002
geometry turbune blade testing - Stanislav 09:33 11/21/2002
- Re: geometry turbune blade testing - Udo Schlengermann 11:40 11/21/2002
TRAINING - KEITH PORTER 00:33 11/21/2002
- Re: TRAINING - RISPAL 11:19 11/22/2002
ULTRASONIC TECHNIQUES - FRANKIE YAWN 14:20 11/20/2002
- Re: ULTRASONIC TECHNIQUES - Dave Lines 10:59 11/21/2002
- Re: ULTRASONIC TECHNIQUES - Mike Concordia 16:45 11/20/2002
- Re: ULTRASONIC TECHNIQUES - Randy Plis 15:32 11/20/2002
Eddy Current - Christopher Dragan 11:27 11/20/2002
- Re: Eddy Current - Joe Buckley, Sonatest PLc 15:00 11/20/2002
- Re: Eddy Current - William Blum 14:10 11/20/2002
ON-LINE WET FILM THICKNESS MEASUREMENT - Eugene Pai 06:30 11/16/2002
NDT.net November Issue - Rolf Diederichs 07:53 11/15/2002
Ultrasonic Testing Porous Ceramics - Sam Moore 23:19 11/14/2002
- Re: Ultrasonic Testing Porous Ceramics - Otto Kroggel 08:40 11/18/2002
  - Re: Ultrasonic Testing Porous Ceramics - M. Kim Joihnson 18:10 11/18/2002
- Re: Ultrasonic Testing Porous Ceramics - Neil Gibson 20:21 11/17/2002
- Re: Ultrasonic Testing Porous Ceramics - Tom Nelligan 15:16 11/15/2002
Inspection of eddy current with Rotary scanner - Andrés Gonzlaez 17:33 11/14/2002
detecting hard objects - jonathan castle 19:30 11/13/2002
- Re: detecting hard objects - John O'Brien 11:23 11/14/2002
- Re: detecting hard objects - Godfrey Hands 09:00 11/14/2002
- Re: detecting hard objects - Jamie Gauthier 07:08 11/14/2002
Detection of underground pipes - jonathan platts 17:36 11/13/2002
- Re: Detection of underground pipes - Luis Santoyo 04:11 1/03/2003
- Re: Detection of underground pipes - John O'Brien 11:26 11/14/2002
- Re: Detection of underground pipes - Weihua Mao 19:05 11/13/2002
grain size - ismail sarpun 01:12 11/12/2002
pulse amplifer wanted - Hason 18:13 11/09/2002
- Re: pulse amplifer wanted - Kevin Barton 22:10 11/11/2002
- Re: pulse amplifer wanted - JM lecoeur 10:05 11/10/2002
  - Re: pulse amplifer wanted - Hason 16:23 11/13/2002
inclusions in SS coil - Dave Utrata 18:54 11/08/2002
- Re: inclusions in SS coil - Sean Franklin 19:53 11/08/2002
  - Re: inclusions in SS coil - S.V.Swamy 18:22 11/10/2002
Scan methods - Bode 00:55 11/08/2002
- Re: Scan methods - Bill Cook 06:23 11/08/2002
  - Re: Scan methods - JALight 15:35 11/08/2002
experimetal setup - ismail sarpun 22:26 11/06/2002
- Re: experimetal setup - Scott Longstreet 16:29 11/07/2002
- Re: experimetal setup - DJ Kallhof 14:38 11/07/2002
  - Re: experimetal setup - Scott Longstreet 15:21 11/07/2002
Testing Corrosion in Fusion-Bonded Epoxy-coated Rebar in Concrete - Dr Ahmed Yamani 08:35 11/05/2002
- Re: Testing Corrosion in Fusion-Bonded Epoxy-coated Rebar in Concrete - Weihua Mao 05:38 11/11/2002
- Re: Testing Corrosion in Fusion-Bonded Epoxy-coated Rebar in Concrete - John O'Brien 11:38 11/07/2002
Testing Corrosion in Fusion-Bobded Epoxy-coated Rebar in Concrete - Dr Ahmed Yamani 08:34 11/05/2002
Level II certification - Ananthan 04:37 11/05/2002
- Re: Level II certification - Mike Trinidad 12:55 11/08/2002
  - Re: Level II certification - David Davies 02:34 11/09/2002
- Re: Level II certification - Bill Cook 05:07 11/05/2002
  - Re: Level II certification - S S Ananthan 07:54 11/05/2002
    - Re: Level II certification - Bill Cook 10:42 11/05/2002
- Re: Level II certification - William Blum 05:00 11/05/2002
Infrared Thermography of buried pipes - Theodoros Theodoulidis 22:05 11/04/2002
- Re: Infrared Thermography of buried pipes - Otto Kroggel 08:59 11/05/2002
- Re: Infrared Thermography of buried pipes - Kåre Johansson 08:12 11/05/2002
INDUSTRIAL X-RAY EQUIPMENT 42O KV WANTED - H.ZAD 14:01 11/04/2002
NDT of Cast Iron - GRP 17:57 11/03/2002
co2 Pitting 13 Chrome - Edward Fisher 12:25 11/02/2002
- Re: co2 Pitting 13 Chrome - Richard D. Roberts 20:13 11/04/2002
You should read this - wolfgang.bisle 16:18 11/01/2002
- Re: You should read this -ATA Papers - Joe Buckley, Sonatest PLc 17:08 11/01/2002
Flat versus spherical reflectors - David Harvey 18:06 10/31/2002
- Re: Flat versus spherical reflectors - Ed Ginzel 19:58 10/31/2002
Looking for ndt technicians, PWHT Technicians Overseas jobs - Elvis Pina 04:32 10/29/2002
- Bad judgement from Craig David - Elvis Pina 01:05 12/04/2002
- Be Careful When Applying To This Vacancy - Craig David 09:23 11/02/2002
  - Re: Be Careful When Applying To This Vacancy - William 00:54 11/06/2002
- Re: Looking for ndt technicians, PWHT Technicians Overseas jobs - Lari Bucich 16:01 11/01/2002
Welding Forum - UKWelder 11:07 10/27/2002
Protocol for Measurement of POD? - Terry Oldberg 18:15 10/26/2002
Another question! - Zongjie.C 09:34 10/25/2002
Is there any method to test strength of brazing joint? - Zongjie.C 09:24 10/25/2002
- Re: Is there any method to test strength of brazing joint? - Randy Plis 16:44 10/25/2002
- Re: Is there any method to test strength of brazing joint? - Sean S. Franklin 15:53 10/25/2002
- Re: Is there any method to test strength of brazing joint? - Godfrey Hands 09:49 10/25/2002
VT - Herve Saint-Surin 16:25 10/24/2002
Accredited NDT Degree Courses in UK - Doug Breeze 13:51 10/24/2002
- Re: Accredited NDT Degree Courses in UK - Robert Paynter 11:49 10/28/2002
- Re: Accredited NDT Degree Courses in UK - Martin Lugg 10:40 10/25/2002
- Re: Accredited NDT Degree Courses in UK - Isac Einstein 00:04 10/25/2002
advice for entering NDT sector? - John Reznik 06:02 10/23/2002
- Re: advice for entering NDT sector? - S.M.Kulkarni 07:35 11/11/2002
  - Re: advice for entering NDT sector? - jason Lim 09:58 11/12/2002
UT beam position - John Higley 23:21 10/22/2002
asme 5 - johnwilliams 16:30 10/22/2002
TOFD of Austenitic welds - Collin Maloney 14:37 10/22/2002
- Re: TOFD of Austenitic welds - Lee Deng 05:32 12/05/2002
- Re: TOFD of Austenitic welds - Randy Plis 16:16 10/22/2002
USK 6 &7's - Andre van Vuuren 21:06 10/20/2002
MAKE QUICK CASH LEGALLY 100% GUARANTEED - Linda DaSilva 19:23 10/18/2002
Used Isotope Projectors - Andre van Vuuren 09:53 10/16/2002
- Re: Used Isotope Projectors - Dent 17:34 10/16/2002
Equotip Hardness Tester requires repair - Mike Trinidad 08:41 10/14/2002
Acoustic sensor array - Kien Chua 16:48 10/11/2002
- Re: Acoustic sensor array - John O'Brien 13:44 10/14/2002
AE/UT/VT inspectors in China - Mike Geissler 15:57 10/11/2002
- Re: AE/UT/VT inspectors in China - Fred Raco, Jr. 16:24 10/11/2002
Rayleigh waves - Philippe Rubbers 08:24 10/11/2002
monel 400 clad gauging - Robert Rock 23:17 10/10/2002
- Re: monel 400 clad gauging - Tom Nelligan 16:55 10/11/2002
Pre-penetrant Surface Prep of an EDM Cut Aluminum Surface - Brian Younce 20:55 10/09/2002
- Re: Pre-penetrant Surface Prep of an EDM Cut Aluminum Surface - Sergio Bilbao 21:29 10/09/2002
- Re: Pre-penetrant Surface Prep of an EDM Cut Aluminum Surface - Phil Herman Jr. 21:15 10/09/2002
NDT Educational videos - Massimiliano Pau 10:29 10/09/2002
- Re: NDT Educational videos - John Hansen 10:31 10/14/2002
  - Re: NDT Educational videos - ROBERT BELLAR 13:13 10/23/2002
    - Re: NDT Educational videos - sutrasno 05:08 11/25/2002
    - Re: NDT Educational videos - P. Palanichamy 06:10 10/24/2002
- Re: NDT Educational videos - Fiorenzo Sorcinelli 11:02 10/09/2002
  - Re: NDT Educational videos - Isac Einstein 15:03 10/13/2002
    - Re: NDT Educational videos - Joe Buckley, Sonatest PLc 11:01 10/14/2002
NDT exhibition and conference in Moscow, 9-11 April 2003 - Maria Badakh 09:39 10/09/2002
NDT methods for aero-engine parts - Ramesh Chandra 20:10 10/08/2002
- Re: NDT methods for aero-engine parts - Ramesh Chandra 19:59 11/12/2002
- Re: NDT methods for aero-engine parts - Randy Plis 15:51 10/18/2002
  - Re: NDT methods for aero-engine parts - Randy Plis 16:55 10/18/2002
- Re: NDT methods for aero-engine parts - Frans Tollenaar 15:43 10/17/2002
- Re: NDT methods for aero-engine parts - Bob Cully 12:56 10/11/2002
- Re: NDT methods for aero-engine parts - John Hansen 11:57 10/09/2002
NDT.net October Issue - 8th ECNDT - Rolf Diederichs 09:21 10/08/2002
ACCP Grandfathering - David Hermanutz 00:01 10/05/2002
- Re: ACCP Grandfathering - Anonymous 05:40 10/06/2002
  - Re: ACCP Grandfathering - Bjarne Larsen 14:20 10/28/2002
  - Re: ACCP Grandfathering - Dent McIntyre 14:40 10/07/2002
    - Re: ACCP Grandfathering - David Davies 05:18 10/08/2002
      - Re: ACCP Grandfathering - John 22:29 11/05/2002
        
        Re: ACCP Grandfathering - David Davies 03:17 11/06/2002
        
        Re: ACCP Grandfathering - Bill Cook 03:39 11/06/2002
Carbon steel boiler inspection - Raúl Navarrete 19:54 10/04/2002
- Re: Carbon steel boiler inspection - John Hansen 10:44 10/07/2002
- Re: Carbon steel boiler inspection - Richard D. Roberts 17:17 10/05/2002
- Re: Carbon steel boiler inspection - Phil Thayer 20:40 10/04/2002
  - Re: Carbon steel boiler inspection - Jamie Gauthier 23:31 10/06/2002
- Re: Carbon steel boiler inspection - Keivn Fosha 20:26 10/04/2002
Material or Machine Problems - K.C.Fosha 17:08 10/03/2002
- Re: Material or Machine Problems - Joe Buckley, Sonatest Plc 14:19 10/07/2002
- Re: Material or Machine Problems - John O'Brien 16:38 10/04/2002
- Re: Material or Machine Problems - Peter Large 21:15 10/03/2002
  - Re: Material or Machine Problems - Richard Kazares 13:38 10/07/2002
  - Re: Material or Machine Problems - Peter Large 21:18 10/03/2002
Eddy Current simulation software - Lars Rydh 09:12 10/03/2002
- Re: Eddy Current simulation software - Steve Jenkins 11:45 10/05/2002
- Re: Eddy Current simulation software - John Hansen 18:38 10/04/2002
- Re: Eddy Current simulation software - Theodoros Theodoulidis 17:47 10/03/2002
  - Re: Eddy Current simulation software - Don Woffindin 14:12 10/24/2002
Eddy current simulation software - Lars Rydh 09:04 10/03/2002
NDT job listing site? - Un-Student 23:51 10/01/2002
- Re: NDT job listing site? - han shuyi 15:36 11/26/2002
- Re: NDT job listing site? - Chris Coughlin 14:37 10/02/2002
- Re: NDT job listing site? - Jason Taylor 09:04 10/02/2002
- Re: NDT job listing site? - Rolf Diederichs 08:53 10/02/2002
sound velocity of Tritium - Jörg Neubert 17:15 10/01/2002
- Re: sound velocity of Tritium - IceClampers 20:37 10/19/2002
- Re: sound velocity of Tritium - Kris Smestad 18:56 10/02/2002
  - Re: sound velocity of Tritium - fredy ornath 22:22 10/02/2002
- Re: sound velocity of Tritium - CuriousMan 23:48 10/01/2002
  - Re: sound velocity of Tritium - Joerg Neubert 15:12 10/16/2002
    - Re: sound velocity of Tritium - Robert Paynter 17:08 10/16/2002
Photoelasticity Educational Kit - Massimiliano Pau 17:08 10/01/2002
- Re: Photoelasticity Educational Kit - A. Asundi 01:55 10/02/2002
inner pipe diammeter measurement - Fernando Monti 14:13 9/30/2002
- Re: inner pipe diammeter measurement - Dr. Patel 16:16 10/02/2002
- Re: inner pipe diammeter measurement - Rolf Diederichs 08:47 10/02/2002
traning - m. mehdizadeh 00:29 9/26/2002
IRIS (Internal Rotary Inspection System) Codes - S Shuttleworth 21:16 9/25/2002
ASME B&PV Secc V Art. 2 and 22 - Miguel Suarez Arana 20:27 9/25/2002
- Re: ASME B&PV Secc V Art. 2 and 22 - Juan Amado 20:10 9/27/2002
Calculation of particle velocity....please help !!!! - Tony Martland 13:09 9/24/2002
- Re: Calculation of particle velocity....please help !!!! - Pierre Marty 14:02 9/26/2002
- Re: Calculation of particle velocity....please help !!!! - luis marques 16:50 9/24/2002
- Re: Calculation of particle velocity....please help !!!! - Paul A. Meyer 16:15 9/24/2002
  - Re: Calculation of particle velocity....please help !!!! - Joe Buckley, Sonatest Plc 17:21 9/24/2002
Ultrasonic signal processing book ! - Juan Perez 19:24 9/22/2002
A Thermographer's Experience at Ground Zero - Chris Seffrin 20:32 9/20/2002
Flaw Detector Signal Processing - Jhon Rengifo 17:36 9/20/2002
- Re: Flaw Detector Signal Processing - Lew King 05:24 9/27/2002
  - Re: Flaw Detector Signal Processing - Philippe Rubbers 10:04 9/27/2002
TO DETERMINE LOAD CARRYING CAPACITY OF EXISTING TIMBER PILES - DEB KUMAR SEN 14:47 9/19/2002
- Re: TO DETERMINE LOAD CARRYING CAPACITY OF EXISTING TIMBER PILES - Otto Kroggel 08:00 9/20/2002
make real MONEY real quick!!!!!!!!!!!! - tim 17:21 9/18/2002
Review of the 8th ECNDT Barcelona 2002 - Rolf Diederichs 21:05 9/17/2002
Need ultrasonic velocity parameters of some solids at various temperatures! - blove 11:12 9/17/2002
- Re: Need ultrasonic velocity parameters of some solids at various temperatures! - Don 14:35 9/18/2002
Eddy Current inspection of Derricks - Lew King 08:00 9/17/2002
- Re: Eddy Current inspection of Derricks - Don 14:44 9/18/2002
  - Re: Eddy Current inspection of Derricks - T.Ausland 15:38 10/04/2002
  - Re: Eddy Current inspection of Derricks - David Hermanutz 15:05 10/04/2002
sound attenuation - BÜLENT DOÐAN 21:49 9/16/2002
- Re: sound attenuation - Tom Nelligan 23:04 9/16/2002
Probability of detection within a specific NDT method as a function of flaw size - Robert Oakley 19:39 9/16/2002
- Re: Probability of detection within a specific NDT method as a function of flaw size - David Forsyth 17:54 10/15/2002
  - Re: Probability of detection within a specific NDT method as a function of flaw size - rodney fordham 21:09 10/15/2002
- Re: Probability of detection within a specific NDT method as a function of flaw size - Terry Oldberg 18:10 10/11/2002
nanomaterials - khazali zin 09:08 9/16/2002
- Re: nanomaterials - William Blum 09:24 9/16/2002
Is ultrasonic can test vulcanization of rubber? - AxlZ W. AekZ 06:22 9/14/2002
- Re: Is ultrasonic can test vulcanization of rubber? - Rolf Diederichs 08:41 9/16/2002
- Re: Is ultrasonic can test vulcanization of rubber? - Joerg Collrep 07:35 9/16/2002
  - Re: Is ultrasonic can test vulcanization of rubber? - Lionel Reyes 15:19 9/18/2002
ASME calibration - Chris Bland 20:10 9/13/2002
- Re: ASME calibration - ayman ahmed 17:56 10/30/2002
Non-Contact, EMAT info - James JOE 13:50 9/13/2002
NDT.net September Issue (AE) - Rolf Diederichs 12:22 9/13/2002
Tank floor testing - Marnix Surgeon 15:10 9/10/2002
Welding Inspectors - mani 09:21 9/10/2002
- Re: Welding Inspectors - Chris Gabriel 08:35 9/14/2002
How to detect the solid/liquid interface from F. Hong 9/09/2002 - N. Azarov 03:38 9/10/2002
How to detect the solid/liquid metal interface? (re-post) - Fangjun Hong 20:26 9/09/2002
- Re: How to detect the solid/liquid metal interface? (re-post) - Tom Nelligan 23:24 9/09/2002
  - Re: How to detect the solid/liquid metal interface? (re-post) - Fangjun Hong 17:30 9/10/2002
Airccoler Onstream Inspection - R.Subramani 10:46 9/09/2002
Ball transducer - James JOE 17:37 9/08/2002
X-ray with more than 400KVA - Mahmoud Mohamed 14:36 9/07/2002
- Re: X-ray with more than 400KVA - Troy Foster 16:52 9/09/2002
  - Re: X-ray with more than 400KVA - Richard Milligan 05:09 9/10/2002
- Re: X-ray with more than 400KVA - rodney fordham 02:16 9/08/2002
Ultrasonic for Enzymes - Aziz U Rehman 15:19 9/02/2002
flaw detectors - Hoseong Kang 11:09 9/02/2002
- Re: flaw detectors - hussam elbehiery 11:22 9/06/2002
  - Re: flaw detectors - hussam elbehiery 11:23 9/06/2002
Ultrasonic Couplants - T. Idzenga 12:55 8/30/2002
Gamma ray using Ir192 for pipes with heavy wall thickness - mahmoud Mohamed 10:27 8/28/2002
- Re: Gamma ray using Ir192 for pipes with heavy wall thickness - DJ Kallhof 15:12 8/28/2002
  - Re: Gamma ray using Ir192 for pipes with heavy wall thickness - Guido Crapels 16:21 8/28/2002
NDE of Porous Metallic Surfaces on Metallic Substrates - Lynn Kirkpatrick 20:12 8/27/2002
- Re: NDE of Porous Metallic Surfaces on Metallic Substrates - F. Buijsen 19:54 8/28/2002
- Re: NDE of Porous Metallic Surfaces on Metallic Substrates - Sean S. Franklin 21:34 8/27/2002
  - Re: NDE of Porous Metallic Surfaces on Metallic Substrates - M. Kim Johnson 22:52 8/27/2002
    - Re: NDE of Porous Metallic Surfaces on Metallic Substrates - Randy Plis 16:25 8/28/2002
help me build a transducer for ultrasonic testing of concrete! - Alvin Almario 02:27 8/27/2002
- Re: help me build a transducer for ultrasonic testing of concrete! - Otto Kroggel 08:52 8/27/2002
Non-contact Untrasonic transducers - Andrei 16:18 8/22/2002
Calibration for DAC (UT) - Harald germ 10:03 8/21/2002
- Re: Calibration for DAC (UT) - Udo Schlengrmann 14:37 8/21/2002
  - Re: Calibration for DAC (UT) - Harald Germ 15:35 8/21/2002
Concrete Pile Testing Instruments - Ravi Ranade 04:12 8/21/2002
- Re: Concrete Pile Testing Instruments - Hoseong Kang 09:28 8/26/2002
Simulation of Rayleigh waves using ANSYS - Tony Martland 16:33 8/20/2002
Magnetizing equipment - Soare Marian 10:20 8/20/2002
Skin effect in MP coil shot ? - Paul Wray 07:27 8/18/2002
- Re: Skin effect in MP coil shot ? - Tom Bloodworth 16:25 8/19/2002
  - Re: Skin effect in MP coil shot ? - Tom Bloodworth 16:29 8/19/2002
    - Re: Skin effect in MP coil shot ? - Paul Wray 02:41 8/20/2002
      - Re: Skin effect in MP coil shot ? - Tom Bloodworth 09:04 8/20/2002
- Re: Skin effect in MP coil shot ? - rodney fordham 14:57 8/18/2002
Need help for my Quantum TE (NDT system product) - Hung Truong Quoc 05:01 8/15/2002
How to monitor on line Naphtenic acid corrosion? - luis marques 12:41 8/14/2002
- Re: How to monitor on line Naphtenic acid corrosion? - luis marques 12:27 8/16/2002
- Re: How to monitor on line Naphtenic acid corrosion? - Walter Wozniak 20:46 8/14/2002
- Re: How to monitor on line Naphtenic acid corrosion? - Lorrie Davies 18:34 8/14/2002
- Re: How to monitor on line Naphtenic acid corrosion? - Walter Wozniak 16:51 8/14/2002
Research groups on Eddy Current - Weihua Mao 17:47 8/13/2002
- Re: Research groups on Eddy Current - Steve Whytock 18:51 8/14/2002
- Re: Research groups on Eddy Current - Joe Buckley, Sonatest Plc 18:11 8/13/2002
  - Re: Research groups on Eddy Current - Weihua Mao 15:26 8/14/2002
    - Re: Research groups on Eddy Current - Don 17:10 9/18/2002
EMAT to recieve Rayleigh waves - Bill Prosser 20:28 8/12/2002
Thickness measurement - Milan 13:34 8/12/2002
- Re: Thickness measurement - Richard Kazares 16:44 8/12/2002
  - Re: Thickness measurement - S.V.Swamy 17:30 8/13/2002
NDT.net August Issue - Rolf Diederichs 13:57 8/09/2002
- Re: NDT.net August Issue - rodney fordham 21:09 8/09/2002
  - Re: NDT.net August Issue - Rolf Diederichs 23:28 8/09/2002
Permeability Variations in Steel - Tom Bloodworth 09:39 8/09/2002
- Re: Permeability Variations in Steel - David J. Reid 02:53 9/16/2002
- Re: Permeability Variations in Steel - Joe Buckley, Sonatest Plc 13:17 8/09/2002
- Re: Permeability Variations in Steel - rodney fordham 12:39 8/09/2002
Raggie X ray unit - Andre van Vuuren 11:37 8/08/2002
Generation of Rayleigh Waves - Bill Prosser 10:44 8/08/2002
- Re: Generation of Rayleigh Waves - Grant Reig 16:47 8/08/2002
- Re: Generation of Rayleigh Waves - Christophe Mattei 15:41 8/08/2002
- Re: Generation of Rayleigh Waves - William Blum 11:01 8/08/2002
- Re: Generation of Rayleigh Waves - Jim Knowles 10:59 8/08/2002
RT at 150 deg centigrade - S. Venkata Ramana 15:33 8/05/2002
- Re: RT at 150 deg centigrade - DJ Kallhof 22:02 8/05/2002
- Re: RT at 150 deg centigrade - Jim Knowles 15:39 8/05/2002
x-ray tube housing - Christian Storch 11:04 8/04/2002
Wanted: 20ma 220 VAC portable x-ray machine for medical use - Zaman Enterprises 21:39 8/03/2002
Information needed - Raúl Navarrete 14:53 8/03/2002
- Re: Information needed - Joe Buckley, Sonatest Plc 07:56 8/05/2002
Boiler tube corrosion fatigue internal cracking - steve louderback 17:32 8/02/2002
- Re: Boiler tube corrosion fatigue internal cracking - Richard D. Roberts 17:52 10/01/2002
- Re: Boiler tube corrosion fatigue internal cracking - Paul Dunnwald 16:29 10/01/2002
  - Re: Boiler tube corrosion fatigue internal cracking - John Hansen 18:43 10/04/2002
- Re: Boiler tube corrosion fatigue internal cracking - S.V.Swamy 15:31 8/03/2002
  - Re: Boiler tube corrosion fatigue internal cracking - Borja 17:46 8/03/2002
- Re: Boiler tube corrosion fatigue internal cracking - DJ Kallhof 18:07 8/02/2002
- Re: Boiler tube corrosion fatigue internal cracking - Joel Light 17:44 8/02/2002
NDT of Electron beam welded Aluminum - S S Ananthan 13:10 8/02/2002
- Re: NDT of Electron beam welded Aluminum - S.V.Swamy 16:37 8/02/2002
Measurement Uncertainty in NDT - S S Ananthan 09:18 8/01/2002
- Re: Measurement Uncertainty in NDT - Chris Coughlin 14:04 8/02/2002
- Re: Measurement Uncertainty in NDT - wang 13:22 8/02/2002
- Re: Measurement Uncertainty in NDT - Scott Longstreet 15:01 8/01/2002
Eddy Current Instrument Help - Gaur Johnson 01:22 8/01/2002
ACFM Rental - Joel Light 23:40 7/31/2002
Depth Micrometer - Gabriel Echeverri C. 19:57 7/31/2002
- Re: Depth Micrometer - Ed Trotter 05:30 8/01/2002
Shearography - radiative transfer - Pierre MARTY 09:45 7/31/2002
Petroleum Refinery-Flue gas cooler - luis marques 17:19 7/30/2002
Kramers-Kronig Relations MATLAB/FORTRAN program - Adelmo Freire 16:53 7/30/2002
Xray sets - Michael Trinidad 18:32 7/29/2002
- Re: Xray sets - Joe Buckley, Sonatest Plc 19:32 7/29/2002
go - paul 19:50 7/28/2002
Digital Radiography - Andre van Vuuren 15:47 7/25/2002
- Re: Digital Radiography - John Cope 21:53 8/02/2002
- Re: Digital Radiography - Steve Alderton 17:07 7/25/2002
internal inspection of the pipeline - Maxim 15:34 7/25/2002
- Re: internal inspection of the pipeline - John O'Brien 17:39 7/30/2002
- Re: internal inspection of the pipeline - Richard Kazares 16:37 7/25/2002
unsubscriber - donny 10:19 7/25/2002
Latin American NDT market - Alex Boyd 08:52 7/25/2002
ut flaw detection samples - Tomas Perez A. 21:01 7/23/2002
- Re: ut flaw detection samples - Phillip Bisgrove 09:16 8/08/2002
  - Re: ut flaw specimens and documentation - John Turner 14:55 8/08/2002
- Re: ut flaw detection samples - Dave 03:46 7/25/2002
- Re: ut flaw detection samples - Chris Gabriel 07:58 7/24/2002
- Re: ut flaw detection samples - Joe Buckley, Sonatest Plc 22:07 7/23/2002
- Re: ut flaw detection samples - George Pherigo 21:27 7/23/2002
Call for Abstacts - 2003 SPIE's NDE and Homeland Security Conf. - Yoseph Bar-Cohen 16:27 7/23/2002
to close a subscription - nordinkraft 10:08 7/23/2002
Compartion of NDT method with AE - Alireza 06:11 7/23/2002
- Re: Compartion of NDT method with AE - Michael Trinidad 17:47 7/29/2002
- Re: Compartion of NDT method with AE - John O'Brien 07:38 7/23/2002
home study online courses from home - jay 01:42 7/23/2002
- Jay Please Give It A Rest. - Ed T. 05:15 7/23/2002
travel course that can be done online - jay 23:41 7/22/2002
Best Deal Ever - ABoyFromHeaven 06:45 7/20/2002
School for medical transcription online - jay 00:54 7/18/2002
learn search engine optimization - jay 00:53 7/18/2002
- Re: learn search engine optimization - Fred Raco 01:52 7/18/2002
learn search emgine optimization - jay 23:37 7/17/2002
I can't explain the %LMA of wire rope failure. - AxlZ W. AekZ 12:35 7/17/2002
- Re: I can't explain the %LMA of wire rope failure. - Bill CooK 16:38 7/17/2002
  - Re: I can't explain the %LMA of wire rope failure. - AxlZ W. AekZ 05:45 7/19/2002
    - Re: I can't explain the %LMA of wire rope failure. - Joe Buckley 08:27 7/19/2002
      - Re: I can't explain the %LMA of wire rope failure. - AxlZ W. AekZ 18:40 7/19/2002
Thermal conductivity meausurements using ultrasonics - Silvia Estrada 04:54 7/17/2002
- Re: Thermal conductivity meausurements using ultrasonics - Dr. Patel 06:04 7/17/2002
Thermal conductivity meausurements using ultrasonics - Silvia Estrada 04:53 7/17/2002
- Re: Thermal conductivity meausurements using ultrasonics - Kris Van de Rostyne 12:27 7/17/2002
- Re: Thermal conductivity meausurements using ultrasonics - Godfrey Hands 08:29 7/17/2002
Transferring point through concrete - Ravi Ranade 03:51 7/17/2002
Digital glamour photographer course - jay 00:34 7/17/2002
learn transcribing medical reports - jay 23:17 7/16/2002
- Re: learn transcribing medical reports "and what ever else you are trying to sell" - Mark Badrick 06:50 7/17/2002
transcriptionists needed - jay 00:57 7/16/2002
ACFM - Stuart 15:41 7/15/2002
- medical transcription - jay 23:57 7/15/2002
tube-to-tubesheet weld scanner - Peter Rost 13:28 7/15/2002
- Re: tube-to-tubesheet weld scanner - Jeff Kott 02:30 7/30/2002
- Re: tube-to-tubesheet weld scanner - Randy Plis 18:40 7/22/2002
- Re: tube-to-tubesheet weld scanner - Leif Jeppesen 07:56 7/18/2002
- Re: tube-to-tubesheet weld scanner - Charlie Jackson 09:52 7/16/2002
  - Re: tube-to-tubesheet weld scanner - Massimo Carminati 06:46 7/18/2002
Transducer Backing - Christoph Noelle 10:29 7/11/2002
ultrasonic attenuation - didier Flotté 09:03 7/11/2002
Ultrasonic Velocity Tables - Richard D. Roberts 16:32 7/10/2002
- Re: Ultrasonic Velocity Tables - Jens Forker 06:31 7/11/2002
UT detection of SG tube sheet cracks - Martin KUNA 14:54 7/10/2002
- Re: UT detection of SG tube sheet cracks - Leif Jeppesen 08:22 7/11/2002
- Re: UT detection of SG tube sheet cracks - Jim Knowles 15:48 7/10/2002
NDT.net July issue - Rolf Diederichs 14:34 7/09/2002
Acxoustic Emission - Mohammed AL Salih 08:43 7/09/2002
- Re: Acxoustic Emission - jay 02:02 7/11/2002
ultrasonic attenuation in concrete - Tina Wilhelm 15:37 7/04/2002
- Re: ultrasonic attenuation in concrete - Christian Grosse 17:29 7/05/2002
Inspection for a grip of cable stayed bridge.? - AxlZ W. AekZ 12:49 7/04/2002
- Re: Inspection for a grip of cable stayed bridge.? - Lou Schillaci 13:31 7/04/2002
Old Panametrics 5524 gage. - Andie 17:45 7/02/2002
Business Scam - Robert Paynter 17:57 7/01/2002
- Re: Business Scam - Rolf Diederichs 22:27 7/01/2002
- Re: Business Scam - Peter Large 18:49 7/01/2002
Real time monitoring of aircraft structures - Andreas Bugge 11:31 7/01/2002
- Re: Real time monitoring of aircraft structures - John O'Brien 17:35 7/30/2002
- Re: Real time monitoring of aircraft structures - Robert Paynter 10:41 7/30/2002
- Re: Real time monitoring of aircraft structures - Jeff Kott 02:42 7/30/2002
- Re: Real time monitoring of aircraft structures - Jens Forker 12:02 7/01/2002
Composite inspection standards - Gary 09:56 7/01/2002
Battery operated portable EMAT device - Zhong Soo Lim 17:55 6/30/2002
- Re: Battery operated portable EMAT device - patrick De Soete Lecoeur Electronique 09:08 7/01/2002
- Re: Battery operated portable EMAT device - Joe Buckley 18:33 6/30/2002
Adhesive bond strength - Liviu Singher 15:46 6/30/2002
- Re: Adhesive bond strength - Franc Buijsen 16:00 6/30/2002
7075-T6 Aluminum - Don Bourque 15:00 6/28/2002
- Re: 7075-T6 Aluminum - Ed Ginzel 18:45 6/28/2002
  - Re: 7075-T6 Aluminum - David Forsyth 15:51 7/04/2002
Testing of steel piles - yogini deshpande 11:19 6/28/2002
Conference Abstracts for QNDE - Wolfgang Bisle 11:10 6/25/2002
About metal hardness testing by eddy-current - Ch.Y.Xiao 14:14 6/22/2002
- Re: About metal hardness testing by eddy-current - Patrick Lafont 16:10 6/23/2002
About metal hardness testing by eddy-current - Ch.Y.Xiao 14:11 6/22/2002
- Re: About metal hardness testing by eddy-current - S.V.Swamy 13:47 6/23/2002
  - Re: About metal hardness testing by eddy-current - Sean Franklin 16:52 6/24/2002
    - Re: About metal hardness testing by eddy-current - David Forsyth 16:09 7/04/2002
Metal analyzer. Who are using subject? - Infrared 06:20 6/21/2002
Looking for good work experience in Civil Engineering related NDT - Ravi Ranade 04:21 6/21/2002
Wetting of polymer to avoid airbubbles indication with US inspection - Christophe Mattei 10:38 6/19/2002
- Re: Wetting of polymer to avoid airbubbles indication with US inspection - Tom Nelligan 15:20 6/19/2002
  - Re: Wetting of polymer to avoid airbubbles indication with US inspection - David Hermanutz 16:10 6/19/2002
MM-30T-SPL Rotation System for Ultrasonic Testing - Dennis 18:03 6/18/2002
API 5L Regulation - Himanshu Ranade 09:14 6/17/2002
- Re: API 5L Regulation - A.Voge 17:11 6/17/2002
Training - Mohiuddin Shaik 07:45 6/17/2002
- Re: Training - Fiorenzo Sorcinelli 08:27 6/17/2002
Flaw Detection based on 2:1 Noise to Flaw Ratio - Jeff 23:46 6/14/2002
- Re: Flaw Detection based on 2:1 Noise to Flaw Ratio - Terry Oldberg 19:14 6/29/2002
- Re: Flaw Detection based on 2:1 Noise to Flaw Ratio - Godfrey Hands 09:39 6/15/2002
  - Re: Flaw Detection based on 2:1 Noise to Flaw Ratio - David Ponder 17:04 6/15/2002
NDT schools in the UK - Fernando Santos 19:21 6/13/2002
- Re: NDT schools in the UK - Joe Buckley 20:09 7/21/2002
- Re: NDT schools in the UK - Gabriel Echeverri 19:39 7/21/2002
- Re: NDT schools in the UK - Dave 18:37 7/21/2002
Replacement parts for an ESC (Econospec) W-1000 - Dan Christian 19:02 6/13/2002
- MPICoils - Mark Palynchuk 21:00 7/05/2002
- Re: Replacement parts for an ESC (Econospec) W-1000 - S.V.Swamy 13:52 6/23/2002
BOEING D114426 LIST INFORMATION - Timothy McAllister 21:08 6/12/2002
- Re: BOEING D114426 LIST INFORMATION - Randy Robinson 22:19 6/25/2002
BOEING D114426 LIST INFORMATION - Timothy McAllister 21:07 6/12/2002
High-temperature transducers - Massimiliano Pau 13:36 6/12/2002
- Re: High-temperature transducers - Johan Blomkvist 16:46 6/19/2002
  - Re: High-temperature transducers - Massimiliano Pau 20:20 6/22/2002
Pipe and Tube difference - suresh 20:14 6/11/2002
Reading Ultracorr TM at Carbon Steel, pipe grade type K03005 - marjuki 14:13 6/11/2002
NDT.net June Issue - Rolf Diederichs 12:40 6/11/2002
Immersion ultrasonic testing of steel bars, calibration blocks? - Lotta Inkovaara 10:07 6/10/2002
- Re: Immersion ultrasonic testing of steel bars, calibration blocks? - David Hermanutz 12:54 6/10/2002
Rent NDT equipment - Mahmoud Mohamed 15:58 6/08/2002
European Post-doc and visiting scientist positions - Xavier 15:22 6/07/2002
WANTED OPERATOR'S MANUAL QFT-200 - MARJUKI 11:31 6/07/2002
- Re: WANTED OPERATOR'S MANUAL QFT-200 - Jeff Kott 02:51 7/30/2002
Inconel 825 Acoustic longitudinal velocity - John Hazel 19:08 6/06/2002
- Re: Inconel 825 Acoustic longitudinal velocity - M. W. Moyer 21:41 6/06/2002
- Re: Inconel 825 Acoustic longitudinal velocity - Danny Wang 19:53 6/06/2002
  - Re: Inconel 825 Acoustic longitudinal velocity - Richard Finlayson 20:52 6/06/2002
Clad steel thickness gauging equipment - PHUA Siang Ling 02:20 6/06/2002
- Re: Clad steel thickness gauging equipment - Dennis 17:55 6/18/2002
  - Re: Clad steel thickness gauging equipment - Sean Franklin 21:57 6/19/2002
UT raw ingots - George 20:18 6/05/2002
Call for Abstacts - 2003 SPIE's NDE and Homeland Security Conf. - yoseph bar-cohen 20:36 6/04/2002
Air Borne Ultra Sound Transducer - Vladimir 11:31 6/04/2002
- Re: Air Borne Ultra Sound Transducer - Linas Svilainis 10:57 6/05/2002
- Re: Air Borne Ultra Sound Transducer - ald 14:26 6/04/2002
determination of critical temperature of fragility and determination of impact elasticity of steels - Bykov S.P. 07:22 6/04/2002
Inspection of structures with Rohacell core - Uri Sol 07:59 6/03/2002
- Re: Inspection of structures with Rohacell core - Franc Buijsen 07:56 6/15/2002
What is the %LMA ? - AxlZ W. AekZ 08:48 6/01/2002
- Re: What is the %LMA ? - Bill CooK 16:37 6/01/2002
  - Re: What is the %LMA ? - AxlZ W. AekZ 08:18 6/04/2002
    - Re: What is the %LMA ? - Bill CooK 13:14 6/04/2002
Acoustic impedances of Liquids - Massimiliano Pau 13:59 5/31/2002
- Re: Acoustic impedances of Liquids - Gelli Francesca 12:20 6/27/2002
- Re: Acoustic impedances of Liquids - Timothy MacInnis 15:19 6/05/2002
I am looking for people who deal with the testing of polymeric paterials - Alexander Kren 18:39 5/29/2002
- Re: I am looking for people who deal with the testing of polymeric paterials - Jim Knowles 13:04 5/30/2002
- Re: I am looking for people who deal with the testing of polymeric paterials - Benmedakhene 12:28 5/30/2002
- Re: I am looking for people who deal with the testing of polymeric paterials - Richard Kazares 19:13 5/29/2002
U.T. with backing left in place - Erik Garberg 16:43 5/29/2002
Test blocks for training - Massimiliano Pau 10:41 5/29/2002
- Re: Test blocks for training - Iikka Virkkunen, Trueflaw Ltd. 14:16 5/29/2002
- Re: Test blocks for training - Joe Buckley, Sonatest Plc 11:36 5/29/2002
Stereoscopy with ultrasonic data? - Massimiliano Pau 17:17 5/28/2002
UT power range? - isra 08:34 5/28/2002
Resdidual magnetism in pipes - Bruce Owen 03:08 5/25/2002
- Re: Resdidual magnetism in pipes David Hermanutz 04:14 5/25/2002
boeing D114426 list information - timothy mcallister 16:54 5/23/2002
Thickness measurement of GFRP - Ishbel Macdonald 12:47 5/23/2002
- Re: Thickness measurement of GFRP - Tom Nelligan 15:34 5/23/2002
- Re: Thickness measurement of GFRP - Jim Knowles AMI Mar EST 13:03 5/23/2002
Measuring pearls - Nick Welland 07:19 5/22/2002
- Re: Measuring pearls - David Hermanutz 07:27 5/22/2002
NDT Terminology: English to German - Phil Herman Jr. 23:57 5/21/2002
- Re: NDT Terminology: English to German - Rolf Diederichs 10:29 5/22/2002
  - Re: NDT Terminology: English to German - P. Palanichamy 06:33 5/23/2002
- Re: NDT Terminology: English to German - Udo Schlengermann 10:09 5/22/2002
- Re: NDT Terminology: English to German - Udo Schlengermann 10:07 5/22/2002
  - Re: NDT Terminology: English to German - Uli Mletzko 11:04 5/22/2002
    - Re: NDT Terminology: English to German - Wolfgang Bisle15:57 5/24/2002
Seeking partner for sealine inspection with intelligent pig - Amedeo Marino 11:47 5/20/2002
NDT Training course material - SKM 06:26 5/18/2002
- Re: NDT Training course material - Joe Buckley, Sonatest Plc 20:38 5/18/2002
- Re: NDT Training course material - Fiorenzo Sorcinelli 15:24 5/18/2002
NDT Practical examination - SK mohiuddin 06:15 5/18/2002
- Re: NDT Practical examination - mike doglas 22:45 7/03/2002
Lamb waves - Rabindranath 23:52 5/17/2002
- Re: Lamb waves - Michael Conry 20:40 5/31/2002
NDT.net May issue - Rolf Diederichs 11:08 5/17/2002
mooring chain inspection procedure - gavin malgas 19:27 5/16/2002
Wanted NDT Equipment and consummable from China - DaoDuydung 08:42 5/16/2002
- Re: Wanted NDT Equipment and consummable from China - Michael Trinidad 13:46 5/20/2002
  - Re: Wanted NDT Equipment and consummable from China - Dent McIntyre 15:48 5/22/2002
    - Re: Wanted NDT Equipment and consummable from China - Michael Trinidad 17:21 5/22/2002
Natural Frequency Testing of generator stator winding overhang using FFT analyzer - Tamal Chatterjee 20:34 5/15/2002
Inspection - Mario Belo 11:18 5/15/2002
Moisture % in wood chips - Linas Svilainis 18:20 5/14/2002
- Re: Moisture % in wood chips - David Hermanutz 05:15 5/15/2002
safety rules - haidar shahri 13:06 5/14/2002
- Re: safety rules - Joe Buckley, Sonatest Plc 13:44 5/15/2002
- Re: safety rules - Robert Paynter 11:19 5/15/2002
- Re: safety rules - Dan H. 19:07 5/14/2002
  - Re: safety rules - gerry may 21:20 5/14/2002
what is... - haidar shahri 13:34 5/12/2002
- Re: what is... - Ed Ginzel 15:39 5/12/2002
- Re: what is... - Mark Badrick 14:05 5/12/2002
Navy / Marine Corp Aviation NDI - David J. Reid 18:38 5/11/2002
ceramic coated fine copper wire - C.Babu Rao 08:59 5/10/2002
MFL - Tank Floors - Mark Badrick 13:18 5/07/2002
- Re: MFL - Tank Floors - Michael Trinidad 14:18 5/20/2002
- Re: MFL - Tank Floors - Rolf Diederichs 11:54 5/18/2002
- Re: MFL - Tank Floors - John O'Brien 18:23 5/09/2002
- Re: MFL - Tank Floors - haidar shahri 13:42 5/08/2002
  - Re: MFL - Tank Floors - Mark Badrick 14:14 5/08/2002
- Re: MFL - Tank Floors - Richard Kazares 14:19 5/07/2002
  - Re: MFL - Tank Floors - Simon 07:07 5/08/2002
Clad Thickness Measurement - S S Ananthan 13:17 5/04/2002
- Re: Clad Thickness Measurement - Tom Nelligan 19:31 5/06/2002
- Re: Clad Thickness Measurement - S. White 13:34 5/06/2002
- Re: Clad Thickness Measurement - Richard Kazares 15:39 5/04/2002
Unions open to UK NDT Technicians. - Dave 12:18 4/30/2002
- Re: Unions open to UK NDT Technicians. - Dave Wilkes 15:50 4/30/2002
Radioisotope License annual Fees - Dent McIntyre 19:52 4/22/2002
- Will anyone please share info on Radioisotope License annual Fees? - Dent McIntyre 17:04 4/29/2002
  - Re: Will anyone please share info on Radioisotope License annual Fees? - Dave Wilkes 11:50 4/30/2002
Re: ndt , x-ray , australia - ashokkumar 10:52 4/24/2002
UT Welding polyethylene pipes - H. Kanavalav 09:28 4/20/2002
monitoring of liquid metal foams with non contact ultrasonics? - Oliver Brunke 14:39 4/19/2002
- Re: monitoring of liquid metal foams with non contact ultrasonics? - chris edwards 15:49 4/19/2002
- Re: monitoring of liquid metal foams with non contact ultrasonics? - Joe Buckley, Sonatest Plc 15:15 4/19/2002
Digital Shearography - Sol Uri 17:27 4/18/2002
- Re: Digital Shearography - Joerg Collrep 09:38 4/23/2002
Vacuum Box Testing - Dent McIntyre 13:48 4/18/2002
- Re: Vacuum Box Testing - Mark Fulton 16:07 6/07/2002
  - Re: Vacuum Box Testing - Jim Knowles 17:08 6/07/2002
- Re: Vacuum Box Testing - Jim Knowles 17:00 5/03/2002
- Re: Vacuum Box Testing - V K Dilip 09:49 4/21/2002
Correct Usage of this Forum - Peter North 09:09 4/18/2002
- Re: Correct Usage of this Forum - Rolf Diederichs 12:25 4/18/2002
Urgent!!! - isra 19:01 4/17/2002
- Re: Urgent!!! - Ed Ginzel 20:01 4/17/2002
  - Re: Urgent!!! - ISRA 09:37 5/01/2002
    - Re: Urgent!!! - Ed Ginzel 14:10 5/01/2002
Experimental signal in concrete - Manuel Rodriguez 16:28 4/17/2002
Probability of detection - Wang 16:19 4/16/2002
- Re: Probability of detection - Dave 03:55 4/17/2002
  - Re: Probability of detection - Terry Oldberg 23:37 4/19/2002
    - Re: Probability of detection - Tim MacInnis 13:46 4/26/2002
      - Re: Probability of detection - Terry Oldberg 02:53 5/06/2002
ACFM - S S Ananthan 09:48 4/16/2002
- Re: ACFM - Peter Simpson 10:46 4/16/2002
- Re: ACFM - T.Ausland 10:08 4/16/2002
  - Re: ACFM - M. Lugg 10:58 4/16/2002
Holography vs Shearography - Rolf Diederichs 08:37 4/16/2002
- Re: Holography vs Shearography - Anand Asundi 12:00 4/22/2002
- Re: Holography vs Shearography - Jörg Collrep 09:53 4/17/2002
Wanted operators for thickness gauging on ship - rajeev chaudhari 15:36 4/15/2002
- Re: Wanted operators for thickness gauging on ship - chaudhari rajeev 08:05 4/16/2002
  - Re: rajeev chaudhari - pruteanu e 14:03 4/23/2002
  - Re: Wanted operators for thickness gauging on ship - MuUNISWAMY 10:18 4/16/2002
- Re: Wanted operators for thickness gauging on ship - Daniel Hieronymus 19:56 4/15/2002
  - re.operators ndt - rajeev chaudhari 08:06 4/18/2002
  - Re: Wanted operators for thickness gauging on ship - karunakaran 07:11 4/16/2002
2nd hand Infrared Thermography - Chris Vilaire 12:09 4/15/2002
- Re: 2nd hand Infrared Thermography - donny 02:15 4/16/2002
- Re: 2nd hand Infrared Thermography - Peter Simpson 20:05 4/15/2002
I have problem with MFL TOOL for wire rope inspection. - AxlZ W AekZ 18:21 4/13/2002
- Re: I have problem with MFL TOOL for wire rope inspection. - AxlZ W AekZ 17:31 4/17/2002
  - Re: I have problem with MFL TOOL for wire rope inspection. - Michael Trinidad 02:00 4/18/2002
- Re: I have problem with MFL TOOL for wire rope inspection. - Michael Trinidad 14:52 4/16/2002
Hardness Analyzer - Shane 09:15 4/13/2002
signal analysis software - S S Ananthan 06:34 4/13/2002
- Re: signal analysis software - D. Robert Hay 15:00 4/13/2002
NDT.net April Issue - Rolf Diederichs 12:34 4/12/2002
Effect of roughnesson UT - Umut 09:59 4/11/2002
Looking for a Research & Development Job in NDT. - Aziz U Rehman 17:47 4/10/2002
- Re: Looking for a Research & Development Job in NDT. - Terry Oldberg 01:04 4/26/2002
- Re: Looking for a Research & Development Job in NDT. - Bob Hay 05:57 4/14/2002
UT of Inconnel welds - Marian SOARE 19:22 4/09/2002
- Re: UT of Inconnel welds - Dave Wilkes 08:19 4/10/2002
- Re: UT of Inconnel welds - J. Mark Davis 19:34 4/09/2002
Online Density Gauge Needed - C. Smithhart 16:26 4/09/2002
Number of manufacturers of ultrasonic transducers - Krister Björnsson 12:06 4/09/2002
Portable Metal Analyzer - Morrie Stonehouse 20:12 4/08/2002
- Re: Portable Metal Analyzer - Christoph Schnitger 19:42 4/10/2002
  - Re: Portable Metal Analyzer - Morrie Stonehouse 17:50 4/12/2002
- Re: Portable Metal Analyzer - Guido Crapels 19:08 4/10/2002
AE - Orlin Bankov 16:21 4/06/2002
Speed of Sound Through Proteins? - R 20:36 4/04/2002
Looking for contact information of Dr. Anne Dromigny - Zheng 16:29 4/04/2002
Experimental signal in concrete - Manuel Rodriguez 15:27 4/04/2002
- Re: Experimental signal in concrete - Otto Kroggel 09:41 4/09/2002
RF amps and function generators - Mark Brewin 16:43 4/03/2002
email contact for books previously posted - Bruce Maxfield 08:24 4/03/2002
black pvc envelopes/folders - GIORA MALEC 12:10 4/02/2002
- Re: black pvc envelopes/folders - rodney 15:12 4/02/2002
NDT and Inspection Jobs - InspectionJobs.com 03:44 4/02/2002
- Re: NDT and Inspection Jobs - James L Duke Jr 16:05 5/08/2002
boeing requirements for radiography, penetrant - timothy mcallister 17:09 4/01/2002
- Re: boeing requirements for radiography, penetrant - George Hopman 04:07 4/04/2002
  - Re: boeing requirements for radiography, penetrant - THADI MOSES AKSHAY KUMAR 18:57 5/12/2002
- Re: boeing requirements for radiography, penetrant - Russ Fessenden 22:11 4/02/2002
- Re: boeing requirements for radiography, penetrant - Randy Plis 15:44 4/02/2002
seeking for gamma-ray imaging system - zc_sun 14:41 3/30/2002
- Re: seeking for gamma-ray imaging system - John Cope 01:31 4/28/2002
Re: Acoustic Absorption Coefficients and dispersion in liquids - Bouaoua.N 10:11 3/28/2002
- Re: Acoustic Absorption Coefficients and dispersion in liquids - Ed Trotter 08:07 3/31/2002
Using TOFD technique on autenitic materials - Toni Hakkarainen 06:39 3/28/2002
- Re: Using TOFD technique on autenitic materials - Ton Kooren 16:58 3/28/2002
Cheap alternative to Wave2000? - R. 17:22 3/27/2002
Multimedia Training CDROM on NDT - Fiorenzo Sorcinelli 10:03 3/26/2002
- Re: Multimedia Training CDROM on NDT - satish sharma 16:59 4/25/2002
  - signal analysis using spectrum analyser - Satish Sharma 18:47 5/09/2002
    - Re: signal analysis using spectrum analyser - D. Robert Hay 19:25 5/09/2002
  - Re: Multimedia Training CDROM on NDT - Fiorenzo Sorcinelli 22:48 4/25/2002
Face plate for contact transducer - Li Zhang 20:56 3/25/2002
- Re: Face plate for contact transducer - Ed Trotter 09:36 3/26/2002
NDT of water supply tubes - Novikov 10:01 3/25/2002
- Re: NDT of water supply tubes - Carlos Quezada F. / CIP Chile Ltda. 14:42 3/25/2002
  - Re: NDT of water supply tubes - Novikov 08:11 3/26/2002
rubber-lined piping inspection - Peter Brealey 09:53 3/24/2002
- Re: rubber-lined piping inspection - Peter Philipp 07:39 3/25/2002
seeking documents about UT NDT to ancient wood - Duan Xinfang 05:58 3/24/2002
- Re: seeking documents about UT NDT to ancient wood - Greg 12:57 3/28/2002
Robots/Crawlers - Gary 18:36 3/23/2002
- Re: Robots/Crawlers - Dale Henson 20:17 3/23/2002
  - Re: Robots/Crawlers - Yoseph Bar-Cohen 16:34 3/25/2002
  - Re: Robots/Crawlers - Randy Plis 19:35 3/24/2002
    - Re: Robots/Crawlers - Dale Henson 17:00 3/25/2002
Buffer rod - wang dongbiao 01:54 3/22/2002
Bonding transducer using Indium - Baosheng Li 22:47 3/20/2002
how to measure the EMATS Sound field? - miveb 04:04 3/20/2002
UT of Super Duplex Welds - Paul Robertson 15:10 3/19/2002
Angular Dependence of Shear Wave Velocities, - A U Rehman 05:16 3/18/2002
- Re: Angular Dependence of Shear Wave Velocities, - N.T.Azarov 04:49 3/19/2002
- Re: Angular Dependence of Shear Wave Velocities, - Shaik Khaja Mohiuddin 01:49 3/19/2002
- Re: Angular Dependence of Shear Wave Velocities, - ILYA ETINGEN 12:06 3/18/2002
  - Re: Angular Dependence of Shear Wave Velocities, - Ed Ginzel 13:50 3/18/2002
    - Re: Angular Dependence of Shear Wave Velocities, - Ed Ginzel 21:32 3/19/2002
    - Re: Angular Dependence of Shear Wave Velocities, - A U Rehman 17:05 3/18/2002
    - Re: Angular Dependence of Shear Wave Velocities, - Uli Mletzko 17:23 3/18/2002
New NDT Education Internet Site - Brian Larson 21:38 3/15/2002
- Re: New NDT Education Internet Site - Kris Smestad 17:56 4/05/2002
- Re: New NDT Education Internet Site - Swarna Swamy 17:09 3/22/2002
- Re: New NDT Education Internet Site - miveb 06:59 3/18/2002
- Re: New NDT Education Internet Site - Godfrey Hands 09:47 3/16/2002
help wanted - sharon 05:36 3/15/2002
SAFT - Philippe Rubbers 16:51 3/14/2002
- Re: SAFT - M. Schickert 10:05 3/18/2002
Testing of laser coated parts? - S Alpua 12:24 3/13/2002
NDT Certification - Shaik Mohiuddin 06:48 3/13/2002
- Re: NDT Certification - Kris Smestad 15:04 3/14/2002
- Re: NDT Certification - Dave Wilkes 09:30 3/13/2002
  - Re: NDT Certification - Nick Welland 01:33 3/17/2002
    - Re: NDT Certification (specific exams) - Fred Raco, Jr. 14:06 3/18/2002
    - Re: NDT Certification - Thomas F. Murphy 00:17 3/18/2002
How to measure minimum wall thickness of a seamless pipe - A.Ramakrishna 06:17 3/12/2002
- Re: How to measure minimum wall thickness of a seamless pipe - Richard Kazares 14:57 3/28/2002
- Re: How to measure minimum wall thickness of a seamless pipe - Greg 13:37 3/28/2002
- Re: How to measure minimum wall thickness of a seamless pipe - Tom Nelligan 15:08 3/12/2002
  - Re: How to measure minimum wall thickness of a seamless pipe - Richard Kazares 15:24 3/12/2002
Material for Wear Plate - li 04:56 3/12/2002
Help Wanted: NDT for steel corrosion inside Concrete - Weihua Mao 22:37 3/10/2002
- Re: Help Wanted: NDT for steel corrosion inside Concrete - Riccardo Scottini 15:40 3/12/2002
- Re: Help Wanted: NDT for steel corrosion inside Concrete - Shigenori YUYAMA 14:58 3/12/2002
- Re: Help Wanted: NDT for steel corrosion inside Concrete - miveb 09:30 3/11/2002
  - Re: Help Wanted: NDT for steel corrosion inside Concrete - Cameron Waters 10:23 3/12/2002
NDT.net March Issue - Rolf Diederichs 19:25 3/10/2002
TFI Corporation - ??????? - Alan Desgrange 16:42 3/07/2002
- Re: TFI Corporation - ??????? - Troy Foster 17:40 3/07/2002
Look for papers - R.Rizzo 16:34 3/06/2002
FILLTE WELD INSPECTION - Humberto Rodríguez 02:21 3/06/2002
- Re: FILLTE WELD INSPECTION - mike toohey 16:59 3/07/2002
look for a NDT job in China. - miveb 11:04 3/05/2002
- Re: look for a NDT job in China. - gigi 20:21 3/05/2002
  - Re: look for a NDT job in China. - miveb 13:31 3/08/2002
look for a NDT job in China. - miveb 12:11 3/04/2002
- Re: look for a NDT job in China. - K. ANANDAM 02:25 3/06/2002
  - Re: look for a NDT job in China. - Dr Hank Seng 10:05 3/06/2002
review of Impact Echo methods - sharon 00:57 3/04/2002
- Re: review of Impact Echo methods - Camilla Colla 00:23 3/13/2002
- Re: review of Impact Echo methods - Rolf Diederichs 07:45 3/07/2002
  - Re: review of Impact Echo methods - William Streett 15:00 3/07/2002
AE on very tall steel structured buildings - Michael Trinidad 09:26 3/02/2002
2002 Transducing Materials and Devices -- Call for Papers - Yoseph Bar-Cohen 23:11 3/01/2002
Reliability of MT - YONGOH SHIN 04:12 2/27/2002
- Re: Reliability of MT - Dave Wilkes 08:31 2/27/2002
  - Re: Reliability of MT - Yongoh Shin 23:50 2/27/2002
    - Re: Reliability of MT - N.T.Azarov 04:07 2/28/2002
    - Re: Reliability of MT - Bill Cook 01:42 2/28/2002
      - Re: Reliability of MT - Dave Wilkes 08:39 2/28/2002
Magnaflux Ultrafilter 300 for sale - Dave Ronson 03:14 2/27/2002
Technical Books Available - Bruce Maxfield 22:33 2/26/2002
- Re: Technical Books Available - ehsan rouhani 22:36 3/01/2002
Classification of NDT methods - Ingolf Hertlin 17:51 2/25/2002
- Re: Classification of NDT methods - D. Robert Hay 23:31 4/01/2002
- Re: Classification of NDT methods - Peter Philipp 08:32 3/02/2002
- Re: Classification of NDT methods - Jamie Gauthier 20:22 2/25/2002
- Re: Classification of NDT methods - Dave Utrata 18:06 2/25/2002
Delay line - wangdongbiao 01:09 2/25/2002
- Re: Delay line - Joe Buckley, Sonatest Plc 01:17 2/26/2002
- Re: Delay line - Tom Nelligan 16:47 2/25/2002
NDT/Aerospace market - Gary Penney 12:23 2/23/2002
NATIONAL NDT AIRCRAFT BOARDS - Roubini Marini 08:09 2/22/2002
method for detection water in honeycomb - Klimaszewski 14:10 2/21/2002
- Re: method for detection water in honeycomb - Norm Woodward 22:36 3/19/2002
- Re: method for detection water in honeycomb - Azarov N.T. 20:52 2/21/2002
- Re: method for detection water in honeycomb - Fernando Santos 19:30 2/21/2002
- Re: method for detection water in honeycomb - Chris Coughlin 15:30 2/21/2002
- Re: method for detection water in honeycomb - John Rodgers 15:26 2/21/2002
- Re: method for detection water in honeycomb - Richard Fitch 15:04 2/21/2002
crack depth measureing by tip diffraction method - Kamran Eftekharmehr 09:40 2/20/2002
- Re: crack depth measureing by tip diffraction method - Patrick bergalonne 17:27 4/10/2002
  - Re: crack depth measureing by tip diffraction method - J. Mark Davis 18:48 4/10/2002
crack depth measureing by tip method - Kamran Eftekharmehr 09:40 2/20/2002
UT instrument(s) needed!! - Hung-yin Lin 17:15 2/19/2002
- Re: UT instrument(s) needed!! - Lee Deng 19:42 2/19/2002
NDT Equipment - Jean-Claude Schwartz 16:15 2/19/2002
- Re: NDT Equipment - David Hirsch 21:50 2/19/2002
Piezoeletrics tranducers for emit ultrasound bundle on the work frequency 1 MHz - Michal V 14:13 2/19/2002
Eder Helio borescope - Rolf Diederichs 20:02 2/16/2002
- Re: Eder Helio borescope - Gary Woodside 21:48 2/16/2002
Penetrant testing facilities for heavy investment castings - Mirko Pikalo 10:28 2/16/2002
Ultrasonic - S S Ananthan 15:39 2/12/2002
- Re: Ultrasonic - henry havrydo 05:48 3/02/2002
  - Re: Ultrasonic - Dr.G.V.S.Murthy 08:21 3/11/2002
    - Re: Ultrasonic - Gerry May 16:28 3/11/2002
Steel 35NCD16 - Josip Gecevic 11:35 2/12/2002
20 MHz Transducers - Navdeep Singh 00:15 2/12/2002
Charpy bars - Raúl Navarrete 18:31 2/11/2002
- Re: Charpy bars - Dave Utrata 20:46 2/11/2002
- Re: Charpy bars - Timothy MacInnis 19:47 2/11/2002
oxidation behavior study of gas turbine blade materials - kanhu charan barick 08:07 2/10/2002
Announcement : Heat Exchanger Inspection Seminar, UK/Northern Europe. - Joe Buckley 12:23 2/08/2002
Chemicals plants- which types are NDT intensive? - Stephen 13:16 2/07/2002
- Re: Chemicals plants- which types are NDT intensive? - John O'Brien 15:53 2/19/2002
Petrochem plant locations Europe - Stephen 17:12 2/06/2002
NDT on ball mill - Richard Coles 04:45 2/06/2002
Equivalence between EN4179 and SNT-TC-1A - EVA GONZALEZ 17:45 2/05/2002
- Re: Equivalence between EN4179 and SNT-TC-1A - Udo Schlengermann 14:21 2/06/2002
- Re: Equivalence between EN4179 and SNT-TC-1A - Dave Wilkes 08:25 2/06/2002
In-Service Steel Tank Floor Inspections - Richard Ledingham 02:15 2/05/2002
- Re: In-Service Steel Tank Floor Inspections - John O'Brien 15:59 2/19/2002
- Re: In-Service Steel Tank Floor Inspections - rajeev chaudhari 04:37 2/05/2002
Indonesia's NDT week May 20-24, 2002 - Gede Bayu Suparta 12:45 2/03/2002
- Re: Indonesia's NDT week May 20-24, 2002 - PT. MULTI KHARISMA PERKASA 08:30 2/05/2002
Looking for used parabolic dish UWC-2000 concentrator for Ultraprobe - Jaques Townsend 20:25 2/02/2002
Explosion proof blacklight - Dana 21:36 2/01/2002
Position available for Cathodic Protection Engineer - Dr. Ahmed Yamani 19:56 1/31/2002
Looking for partners - zc.sun 06:45 1/30/2002
Diffraction effects - Massimiliano Pau 13:09 1/29/2002
- Re: Diffraction effects - N.T. Azarov 19:21 1/31/2002
NDT Promotional Material - Dan Martin 13:19 1/27/2002
- Re: NDT Promotional Material - Dave Wilkes 09:07 1/28/2002
NDT market Analysis - Dr. Ahmed Yamani 08:42 1/27/2002
- Re: NDT market Analysis - William Blum 11:36 2/07/2002
- Re: NDT market Analysis - CHARLES SHAHWE 08:34 1/29/2002
Inspection of rails - TQCC 13:35 1/24/2002
- Re: Inspection of rails - Ron Mahler 07:55 2/07/2002
- Re: Inspection of rails - Peter Philipp 23:40 2/06/2002
- Re: Inspection of rails - Don Searle 01:08 1/25/2002
- Re: Inspection of rails - Douglas Lutz 23:10 1/24/2002
Gamma Shot of a Celtic Cross - Dave Wilkes 13:35 1/24/2002
- Re: Gamma Shot of a Celtic Cross - Martin Schickert 14:50 1/24/2002
  - Re: Gamma Shot of a Celtic Cross - Jamie Gauthier 16:21 1/24/2002
On-line Ultrasonic Inspection of Billets - TQCC 13:31 1/24/2002
- Re: On-line Ultrasonic Inspection of Billets - Hertlin 10:06 1/25/2002
- Re: On-line Ultrasonic Inspection of Billets - Frederick Beck 14:42 1/24/2002
Used NDT Equipment - Dave Bentley 02:05 1/24/2002
- Re: Used NDT Equipment - Seok kee, Oh 08:30 2/26/2002
- Used NDT Equipment - Christoph Schnitger 15:20 1/24/2002
  - Used NDT Equipment - Josef Plasek 07:55 1/29/2002
- Re: Used NDT Equipment - Gilles Caissie 14:38 1/24/2002
  - Re: Used NDT Equipment - Raimond Grimberg 14:48 1/24/2002
- Re: Used NDT Equipment - rajeev chaudhari 04:52 1/24/2002
- Used NDT Equipment - Dorin Brodersen 03:06 1/24/2002
  - Re: Used NDT Equipment - charles shahwe 09:17 1/24/2002
AE for AST Leak Testing - Michael Wegscheid 19:22 1/23/2002
- Re: AE for AST Leak Testing - John O'Brien 16:07 2/19/2002
- Re: AE for AST Leak Testing - Jens Forker 06:58 1/24/2002
Circuit Keithley DMM 197 - Michael Marx 10:04 1/23/2002
Seeking Used NDE Equipment - Morrie 18:31 1/21/2002
- Re: Seeking Used NDE Equipment - Peter Simpson 19:13 1/21/2002
Seeking NDT Journals - Rolf Diederichs 17:58 1/21/2002
- Re: Seeking NDT Journals - Liviu Singher 11:59 1/22/2002
  - Re: Seeking NDT Journals - Rymantas KAZYS 13:57 2/06/2002
Need some interpretation of ultrasonic velocity in olive oil and water - kauhmani 20:12 1/19/2002
- Re: Need some interpretation of ultrasonic velocity in olive oil and water - Mike Leger 23:35 1/25/2002
- Re: Need some interpretation of ultrasonic velocity in olive oil and water - elgazery 11:18 1/21/2002
anyone can help me? - Diba Abinama 06:07 1/19/2002
- Re: anyone can help me? - Joe Buckley 11:43 1/19/2002
Steel reinforcement - Massimo Schinelli 17:03 1/18/2002
- Re: Steel reinforcement - Martin Schickert 09:27 1/21/2002
Wooden Poles - Liam 14:47 1/18/2002
Level 2 training and certification - FrankM 20:58 1/17/2002
Problems with electromagnetic fields - Massimiliano Pau 18:22 1/17/2002
- Re: Problems with electromagnetic fields - Joe Buckley 20:42 1/17/2002
Does anyone have information about application of... - Meese 13:43 1/17/2002
- Re: Does anyone have information about application of... - Rolf Diederichs 14:32 1/19/2002
Roller Probes for US NDT - Thomas Wulf 08:54 1/17/2002
- Re: Roller Probes for US NDT - Kelly Phelps 20:51 1/25/2002
- Re: Roller Probes for US NDT - Don Searle 01:11 1/25/2002
- Re: Roller Probes for US NDT - Joe Buckley 09:30 1/17/2002
Low cost pulser/receiver of UT - AxlZ AekZ 17:10 1/15/2002
Look for under ground pipeline corrosion inspection system - zc.sun 10:16 1/15/2002
- Re: Look for under ground pipeline corrosion inspection system - Jim Yukes 19:29 2/22/2002
  - Re: Look for under ground pipeline corrosion inspection system - David 06:09 2/25/2002
  - Re: Look for under ground pipeline corrosion inspection system - Jamie Gauthier 20:45 2/22/2002
- Re: Look for under ground pipeline corrosion inspection system - Jim Yukes 19:29 2/22/2002
- Re: Look for under ground pipeline corrosion inspection system - Peter 08:11 2/21/2002
- Re: Look for under ground pipeline corrosion inspection system - Brant Shields 18:16 2/20/2002
- Re: Look for under ground pipeline corrosion inspection system - John O'Brien 11:46 1/15/2002
Level 3 good or bad? - Egan Dryczewycz 02:36 1/15/2002
- Re: Level 3 good or bad? - Dave Wilkes 17:48 1/16/2002
  - Re: Level 3 good or bad? - Jeff Leak 04:36 1/17/2002
    - Re: Level 3 good or bad? - S.V.Swamy 18:41 1/20/2002
      - Re: Level 3 good or bad? - Egan Dryczewycz 02:54 1/22/2002
        
        Re: Level 3 good or bad? - FER 13:49 1/22/2002
        
        Re: Level 3 good or bad? - Ed Kork 16:27 2/17/2002
Calibration Procedures for Immersion Ultrasound Testing - Suresh Palanisamy 00:05 1/15/2002
- Re: Calibration Procedures for Immersion Ultrasound Testing - Udo Schlengermann 14:48 1/15/2002
  - Re: Calibration Procedures for Immersion Ultrasound Testing - S.V.Swamy 18:47 1/20/2002
Pipe Scale and NDT Readings - Carl Olson Jr. 16:58 1/14/2002
- Re: Pipe Scale and NDT Readings - Tom Nelligan 17:13 1/14/2002
- Re: Pipe Scale and NDT Readings - Ted Ballenger 17:03 1/14/2002
  - Re: Pipe Scale and NDT Readings - S.V.Swamy 18:54 1/20/2002
Leading company in Cathodic Protection - Dr Ahmed Yamani 13:59 1/14/2002
- Re: Leading company in Cathodic Protection - Slimane Terchoun 14:30 2/11/2002
  - Re: Leading company in Cathodic Protection - T.Ausland 14:40 2/11/2002
Employment Opportunities in the Pacific Rim (SEA) - Mark 19:31 1/13/2002
- Re: Employment Opportunities in the Pacific Rim (SEA) - Bill Cook 10:24 1/14/2002
  - Re: Employment Opportunities in the Pacific Rim (SEA) - mark 16:21 1/14/2002
Cooling coil for ultrasonic transducer - wang 05:19 1/11/2002
- Re: Cooling coil for ultrasonic transducer - G. Davis 16:16 1/11/2002
NDI school in Pensacola, Fl. - Spc. C. Ford 19:18 1/10/2002
- Re: NDI school in Pensacola, Fl. - William Blum 15:22 1/15/2002
Looking for Companies using intelligent tool (PIG) for pipe inspection - Dr. Ahmed Yamani 09:56 1/10/2002
- Re: Looking for Companies using intelligent tool (PIG) for pipe inspection - John O'Brien 10:35 1/10/2002
AMPET NDE - Michael Suits 17:44 1/09/2002
NDT.net January Issue - Rolf Diederichs 12:02 1/09/2002
ACFM - Erika 01:47 1/09/2002
- Re: ACFM - Martin Lugg 12:35 1/09/2002
- Re: ACFM - Guido Crapels 11:52 1/09/2002
European Equipment Manufacturers - Gary 17:26 1/08/2002
Contact to Visual Inspection Tech (V.I.T) - Rolf Diederichs 10:47 1/08/2002
- Re: Contact to Visual Inspection Tech (V.I.T) - P. Troost 15:00 1/08/2002
  - Re: Contact to Visual Inspection Tech (V.I.T) - Tim Ryan 01:13 1/09/2002
- Re: Contact to Visual Inspection Tech (V.I.T) - Fred Raco, Jr. RNDT Nondestructive Testing Services 13:51 1/08/2002
non destructive analysis of interfacial decohesion in layered thin coatings - Vasco Teixeira 00:26 1/08/2002
- Re: non destructive analysis of interfacial decohesion in layered thin coatings - Richard Kazares 15:58 1/08/2002
refractory materials - Michael Lee 11:41 1/07/2002
VT Training - William Blum 09:54 1/06/2002
Thermographic software - Terry 19:12 1/04/2002
- Re: Thermographic software - Jaques 21:35 1/04/2002
Shortage of isotope cobalt 60 for industrial radiography - TILLET 15:53 1/04/2002
- Re: Shortage of isotope cobalt 60 for industrial radiography - Kirra 07:46 3/01/2002
Railway optimal fequency - Rui Maia 00:52 1/04/2002
- Re: Railway optimal fequency - Tom Nelligan 15:02 1/04/2002
- Re: Railway optimal fequency - Philippe Guevremont 01:02 1/04/2002
|NDTnet Forum|
|NDTnet|
NDTnet info@ndt.net

NDTnet Forum - Message Board Archive 2002 2001 - 2000 - 1999 - 1998

NDTnet Forum - Message Board Archive 2002
2001 - 2000 - 1999 - 1998