Back to:
FORUM
NDT.net Home
Exhibition
Virtual Library
Events
NDT Encyclopedia
Abstracts
Books
Journals
Archive
Search
Technical Discussions:
Archive
2004
Seeking Solutions, Seeking Explanation etc.
Thread View
[
Post a Message
]
USD 10 Maunaul
-
Joe Quinn
16:08 Dec-30-2004
Re: USD 10 Maunaul
-
Eric Chen
02:02 Dec-31-2004
Pipeline Crawler
-
Ivan inin
10:02 Dec-28-2004
Re: Pipeline Crawler
-
Jan Pols
15:16 Jan-03-2005
Re: Pipeline Crawler
-
John O'Brien
17:54 Dec-29-2004
Ultrasonic Immersion Sensors
-
Ivan inin
12:00 Dec-26-2004
Re: Ultrasonic Immersion Sensors
-
Chen Wenbin
02:00 Dec-30-2004
Re: Ultrasonic Immersion Sensors
-
John O'Brien
17:51 Dec-29-2004
tofd
-
sandeep
14:03 Dec-20-2004
mpi
-
sen
08:31 Dec-20-2004
alternative generation of ultrasound waves
-
kostas papas
23:43 Dec-17-2004
Re: alternative generation of ultrasound waves
-
Godfrey Hands
09:42 Dec-20-2004
Re: alternative generation of ultrasound waves
-
Wolfgang Bisle
14:12 Dec-20-2004
Re: alternative generation of ultrasound waves
-
kostas papas
16:33 Dec-21-2004
Re: Condition Monitoring Database (Static equipment)
-
anand
16:04 Dec-17-2004
tofd
-
sandeep pawar
10:06 Dec-17-2004
Artificial Notch cutting machine
-
S.G.
12:34 Dec-16-2004
Re: Comparison of steel grades
-
Ramazan US
09:06 Dec-16-2004
TRM fabrication
-
Muhammad Alnadabi
21:11 Dec-14-2004
Ultrasonic propagation along sheet steel.
-
Phil Malone
16:01 Dec-14-2004
Re: Ultrasonic propagation along sheet steel.
-
Godfrey Hands
11:07 Dec-16-2004
Structural fire damage
-
Manuel Haces
18:25 Dec-10-2004
Re: Structural fire damage
-
S.V.Swamy
14:10 Dec-12-2004
Standards for reprofiling wheelsets
-
leo sotomayor
15:21 Dec-10-2004
Re: Standards for reprofiling wheelsets
-
Dave Utrata
19:03 Dec-10-2004
Triggering pulse
-
S.G.
10:23 Dec-08-2004
Re: Triggering pulse
-
Richard Kazares
21:30 Dec-08-2004
Re: Triggering pulse
-
S.G
04:45 Dec-09-2004
Re: Triggering pulse
-
Udo Schlengermann
09:58 Dec-20-2004
Re: Triggering pulse
-
chris gartside
14:20 Dec-08-2004
Ultrasonic interference pattern recognition products
-
Martin Nyman
17:50 Dec-07-2004
Re: Ultrasonic interference pattern recognition products
-
David Forsyth
19:21 Dec-07-2004
Re: Ultrasonic interference pattern recognition products
-
Martin Nyman
10:53 Dec-08-2004
Flatness of ut probe face
-
Amry Amin
09:41 Dec-07-2004
Re: Flatness of ut probe face
-
Phil Herman Jr.
19:35 Dec-07-2004
about acoustic impedance layer
-
Peter Lee
01:50 Dec-07-2004
Re: about acoustic impedance layer
-
Ethan
00:13 Dec-09-2004
Fluorescent methods in higher ambient light
-
Nick Welland
02:43 Dec-06-2004
The correlation of hardness versus distance of slitting-edge with core metal sheets and the deformation of the metal properties.
-
Maarten Nijsse
15:41 Dec-02-2004
Re: The correlation of hardness versus distance of slitting-edge with core metal sheets and the deformation of the metal properties.
-
Elmar van den Elzen
19:01 Dec-05-2004
IOW Block, 5 Small Holes
-
General
15:06 Dec-02-2004
Re: IOW Block, 5 Small Holes
-
John Woollven
18:06 Dec-02-2004
Electrical resistance measurements
-
John Turner
10:59 Dec-02-2004
Re: Electrical resistance measurements
-
John O'Brien
17:37 Dec-07-2004
Re: Electrical resistance measurements
-
Phil Thayer
14:59 Dec-03-2004
Re: Electrical resistance measurements
-
James Dolfi
01:40 Dec-03-2004
Re: Electrical resistance measurements
-
S.V.Swamy
17:11 Dec-04-2004
Re: Electrical resistance measurements
-
Richard Kazares
15:58 Dec-06-2004
Re: Electrical resistance measurements
-
S.V.Swamy
17:40 Dec-07-2004
Boiler Tube Inspection
-
Nick Welland
04:07 Dec-02-2004
Re: Boiler Tube Inspection
-
Ingo Becker
08:54 Dec-03-2004
Re: Boiler Tube Inspection
-
Rich Roberts
23:18 Dec-02-2004
Re: Boiler Tube Inspection
-
Sunil Ramchandran
17:27 Dec-03-2004
Optimum probe frequency and sampling rates
-
Don W
16:51 Dec-01-2004
Re: Optimum probe frequency and sampling rates
-
Pim van Andel
22:49 Dec-01-2004
Re: Optimum probe frequency and sampling rates
-
Ed Ginzel
14:28 Dec-05-2004
Sizing Defects
-
General
01:07 Nov-30-2004
Re: Sizing Defects
-
charlie jackson
15:04 Nov-30-2004
Re: Sizing Defects
-
Dent McIntyre
13:59 Nov-30-2004
Re: Sizing Defects
-
General
12:47 Dec-01-2004
Re: Sizing Defects
-
Chris Jones
07:46 Nov-30-2004
Rounded indications as per Article 4 ASME VIII
-
subrata Banerjee
08:43 Nov-27-2004
Bending specification
-
Raúl Ortiz
09:07 Nov-26-2004
Re: UT Cal Blocks for Piping / Curved Surfaces
-
Ed T.
05:32 Nov-25-2004
Re: UT Cal Blocks for Piping / Curved Surfaces
-
General
12:42 Nov-25-2004
Re: UT Cal Blocks for Piping / Curved Surfaces
-
Ed T.
13:22 Nov-25-2004
SSP does it work?
-
Pim van Andel
16:46 Nov-24-2004
Re: SSP does it work?
-
Philippe Rubbers
09:35 Nov-25-2004
Re: SSP does it work?
-
Pim van Andel
13:07 Nov-25-2004
looking for a Logarithmic Amplifier with 100dB and 10MHz-BW
-
Shaoliang Wang
14:29 Nov-24-2004
UT Cal Blocks for Piping / Curved Surfaces
-
General
14:17 Nov-24-2004
Re: UT Cal Blocks for Piping / Curved Surfaces
-
Phil Herman Jr.
22:17 Nov-24-2004
questions about Acoustic emission
-
mayling
08:35 Nov-24-2004
Servcing of X rite Densitometer
-
S S Ananthan
06:59 Nov-19-2004
Ultrasonic testing supplier in Europe
-
David LAVASTRE
22:00 Nov-18-2004
Re: Ultrasonic testing supplier in Europe
-
Michel Macé
16:12 Dec-12-2004
Re: Ultrasonic testing supplier in Europe
-
S.V.Swamy
17:29 Dec-14-2004
Re: Ultrasonic testing supplier in Europe
-
MACE Michel
21:36 Dec-14-2004
Re: Ultrasonic testing supplier in Europe
-
Shashikant Gawand.
04:28 Nov-24-2004
Re: Ultrasonic testing supplier in Europe
-
Godfrey Hands
12:54 Nov-22-2004
Re: Ultrasonic testing supplier in Europe
-
Franco Baratta
11:27 Nov-19-2004
ASTM Standards
-
General
05:12 Nov-18-2004
Re: ASTM Standards
-
Ricahard Beldyk, PE
21:05 Nov-22-2004
Setting Sensitivity to CSA W59
-
General
19:15 Nov-17-2004
Magnetic effect on sound wave
-
S.G.
09:04 Nov-15-2004
Area Amplitude Blocks
-
General
01:53 Nov-15-2004
Re: Area Amplitude Blocks
-
Ken Beck
19:32 Nov-16-2004
Specific Gamma Constant Intensity
-
William Blum
17:10 Nov-13-2004
Re: Specific Gamma Constant Intensity
-
Buddy
21:45 Nov-14-2004
Re: What is PMI
-
DIMOULIS IOANNIS
19:39 Nov-12-2004
Square vs Round Transducers
-
General
02:27 Nov-12-2004
Re: Square vs Round Transducers
-
Ed Ginzel
16:05 Nov-13-2004
Re: Perspex insert in IIW Block
-
Ed T.
09:44 Nov-11-2004
Perspex insert in IIW Block
-
General
03:58 Nov-10-2004
Re: Perspex insert in IIW Block
-
Dave
04:09 Nov-13-2004
Re: Perspex insert in IIW Block
-
Ed T.
13:20 Nov-13-2004
Re: Perspex insert in IIW Block
-
ED T.
13:34 Nov-13-2004
Re: Perspex insert in IIW Block
-
Udo Schlengermann
09:24 Nov-12-2004
Re: Perspex insert in IIW Block
-
Ed T.
04:43 Nov-10-2004
Re: Perspex insert in IIW Block
-
Gordon E. Smith
04:07 Nov-12-2004
Re: Perspex insert in IIW Block
-
Phil Herman Jr.
00:41 Nov-11-2004
Re: Perspex insert in IIW Block
-
General
01:05 Nov-12-2004
Re: Perspex insert in IIW Block
-
S.V.Swamy
16:15 Nov-13-2004
Re: Perspex insert in IIW Block
-
Hermann Wüstenberg
16:07 Nov-11-2004
Re: Perspex insert in IIW Block
-
Hmmmm
04:43 Nov-10-2004
ToFD testing
-
Wolfgang Graaf
10:59 Nov-07-2004
Re: ToFD testing
-
Ed Ginzel
00:25 Nov-08-2004
Re: ToFD testing
-
Simon Amallraja
18:28 Nov-07-2004
Re: ToFD testing
-
JOhn
05:34 Nov-08-2004
Re: ToFD testing
-
Stefan Medenbach
17:42 Nov-07-2004
Surface Probe Eddy Current Inspection of Tubing
-
Derek
17:16 Nov-05-2004
Re: Surface Probe Eddy Current Inspection of Tubing
-
dirk wagner
11:29 Dec-09-2004
Re: Surface Probe Eddy Current Inspection of Tubing
-
S.V.Swamy
14:21 Dec-12-2004
eddy current testing of aluminum welds
-
gowrishankar
08:00 Nov-05-2004
Re: eddy current testing of aluminum welds
-
John
09:18 Nov-05-2004
Re: eddy current testing of aluminum welds
-
S.V.Swamy
16:10 Nov-06-2004
Re: eddy current testing of aluminum welds
-
John
04:47 Nov-07-2004
Re: eddy current testing of aluminum welds
-
Ed Ginzel
18:04 Nov-07-2004
Re: eddy current testing of aluminum welds
-
John
05:32 Nov-08-2004
Zone of influence in impact echo
-
Kavita
21:58 Nov-03-2004
AIAX Regulation
-
Christoph Schnitger
11:32 Nov-02-2004
ULTRAGEL
-
Abdulla benamer
19:10 Nov-01-2004
Re: ULTRAGEL
-
Chris
19:07 Nov-02-2004
Re: ULTRAGEL
-
Ethan
14:25 Nov-02-2004
how do piezo-electric sounder works?
-
Amuro
16:33 Oct-30-2004
Looking for a transducer/wedge for surface waves in steel
-
Jhon Rengifo
18:03 Oct-28-2004
Re: Looking for a transducer/wedge for surface waves in steel
-
Jimmy
02:34 Oct-31-2004
High power piezo transducer
-
Koichiro Kawashima
02:21 Oct-27-2004
Re: High power piezo transducer
-
Ethan
15:36 Oct-27-2004
Filler metal
-
Raúl Ortiz
14:42 Oct-19-2004
Re: Filler metal
-
Raúl Ortiz
14:42 Oct-19-2004
Thickness measurement of feed water control valve
-
jeeva
12:19 Oct-16-2004
Looking for ultrsonic c-scan systems
-
F.Buijsen
20:35 Oct-15-2004
dsp
-
sen
16:49 Oct-15-2004
Re: dsp
-
M.Kovacik
18:07 Oct-18-2004
scans
-
sandeep
15:48 Oct-14-2004
Re: scans
-
Rolf D.
16:59 Oct-14-2004
Dry coupling of ultrasonic transducers to steel
-
Dipl.-Ing. Martin Heinz
19:04 Oct-11-2004
DGS scale
-
S.G.
06:22 Oct-11-2004
Re: DGS scale
-
Neil Burleigh
01:37 Oct-18-2004
Re: DGS scale
-
S.G.
05:11 Oct-18-2004
humidity measurement system
-
rodrigo
14:35 Oct-06-2004
high temp thickness measurment
-
rasjl
15:46 Oct-05-2004
1.6 IEC 336 (x-ray machine)
-
madiha
10:40 Oct-05-2004
Re: 1.6 IEC 336 (x-ray machine)
-
Jim
04:48 Oct-11-2004
IQI Rrequirements
-
John G.
04:02 Oct-05-2004
Re: IQI Rrequirements
-
Buddy
04:35 Oct-05-2004
Re: IQI Rrequirements
-
Anonymous
11:03 Oct-06-2004
Re: IQI Rrequirements
-
Buddy
02:52 Oct-07-2004
Re: IQI Rrequirements
-
Buddy
04:29 Oct-05-2004
What about deformation detectors?
-
SmArt
19:45 Oct-04-2004
tofd
-
sandeep pawar
16:39 Oct-04-2004
UT and magnetic field
-
M.Kovacik
10:14 Oct-03-2004
Re: UT and magnetic field
-
Chris Coughlin
15:08 Oct-07-2004
Re: UT and magnetic field
-
Pim van Andel
22:11 Oct-08-2004
Re: UT and magnetic field
-
Chris Coughlin
23:14 Oct-08-2004
Re: UT and magnetic field
-
Pim van Andel
12:32 Oct-06-2004
Transducer Wear Face
-
Rich Roberts
18:21 Oct-02-2004
Re: Transducer Wear Face
-
Doug Breeze
22:17 Oct-03-2004
Re: Transducer Wear Face
-
Ed Ginzel
16:32 Oct-03-2004
Re: Transducer Wear Face
-
N.Kuppusamy
04:10 Oct-03-2004
Equivalent BS Std
-
Shaji S Panicker
17:41 Oct-02-2004
Bonding Ultrasonic 1 and 3 MHz piezoelectric disc transducer
-
Andrés Giraldo
17:19 Oct-01-2004
Nickel 200 Mag Sat or Rft
-
Terry
17:30 Sep-30-2004
Checks of a radiographic films viewer (negatoscope)
-
Dmitri
11:50 Sep-30-2004
Re: Checks of a radiographic films viewer (negatoscope)
-
DJ Kallhof
17:57 Sep-30-2004
Utrasonic probe assessment
-
Amry Amin
09:14 Sep-30-2004
Re: Utrasonic probe assessment
-
Udo Schlengermann
12:42 Sep-30-2004
Seamless pipe test.
-
S.G.
11:49 Sep-29-2004
Re: Seamless pipe test.
-
Ed T.
13:07 Sep-29-2004
Re: Seamless pipe test.
-
S.G.
05:46 Sep-30-2004
Re: Seamless pipe test.
-
Neil Burleigh
07:16 Oct-05-2004
Thin layer
-
Francesca
12:43 Sep-28-2004
Re: Thin layer
-
Paul A. Meyer
20:42 Sep-28-2004
International Business Cooperation!
-
GFH
15:28 Sep-27-2004
hidrostatic testing
-
Raúl Ortiz
12:03 Sep-27-2004
Re: hidrostatic testing
-
John O'Brien
13:17 Sep-27-2004
Pizo-elecric crystal frequency variation
-
S.G.
05:18 Sep-25-2004
Re: Pizo-elecric crystal frequency variation
-
Paul A. Meyer
12:54 Sep-27-2004
Re: Pizo-elecric crystal frequency variation
-
Amry Amin
10:39 Sep-29-2004
Re: Pizo-elecric crystal frequency variation
-
Paul A. Meyer
13:43 Oct-01-2004
Re: Pizo-elecric crystal frequency variation
-
Ed Ginzel
21:58 Sep-27-2004
measuring method for residual stress
-
James JOE
14:02 Sep-24-2004
Re: measuring method for residual stress
-
M. Kim Johnson
20:02 Sep-27-2004
Re: measuring method for residual stress
-
Schneider, Eckhardt
10:41 Sep-28-2004
P-scan details
-
S.R.G.PRABHU
09:22 Sep-24-2004
Re: P-scan details
-
Doug Breeze
12:09 Sep-28-2004
Re: P-scan details
-
S.R.G.PRABHU
18:47 Sep-28-2004
Re: P-scan details
-
John O'Brien
13:21 Sep-27-2004
Weld test. by ultrasonic testing.
-
S.G.
14:03 Sep-23-2004
Re: Weld test. by ultrasonic testing.
-
HUNG
05:15 Sep-24-2004
Composite repairs
-
KMP
21:57 Sep-21-2004
Re: Composite repairs
-
Alex Easton
19:58 Sep-24-2004
Re: Composite repairs
-
S.V.Swamy
17:52 Sep-25-2004
Re: Composite repairs
-
John O'Brien
09:18 Sep-22-2004
USD 10 ultrasonic
-
Son
04:03 Sep-21-2004
Surface etching to detect hot cracks
-
Vince
18:22 Sep-16-2004
Re: Surface etching to detect hot cracks
-
DJ Kallhof
14:30 Sep-20-2004
Re: Surface etching to detect hot cracks
-
Ed T.
08:26 Sep-17-2004
Re: Surface etching to detect hot cracks
-
S.V.Swamy
18:41 Sep-17-2004
Re: Surface etching to detect hot cracks
-
Vince
22:35 Sep-20-2004
Re: Surface etching to detect hot cracks
-
Vince
16:12 Sep-21-2004
Re: Surface etching to detect hot cracks
-
mahinda
11:10 Nov-17-2004
Re: Surface etching to detect hot cracks
-
DJ Kallhof
13:27 Sep-21-2004
Re: Surface etching to detect hot cracks
-
David Forsyth
15:38 Sep-21-2004
LFET - Low Frequency Electromagnetic technique
-
Robert Anderson
16:23 Sep-16-2004
MPI-crack detction
-
sen
13:54 Sep-16-2004
Re: MPI-crack detction
-
S.V.Swamy
18:49 Sep-17-2004
Flex-Packaging delayed Adhesion failure
-
Ricardo
15:55 Sep-14-2004
Ultrasonic testing on Granite and marble
-
S.G.
05:39 Sep-14-2004
Re: Ultrasonic testing on Granite and marble
-
S.V.Swamy
18:59 Sep-17-2004
Re: Ultrasonic testing on Granite and marble
-
M. Schickert
09:22 Sep-15-2004
detectable flaw size in aluminum
-
Paul Fischer
17:16 Sep-12-2004
Re: detectable flaw size in aluminum
-
S.V.Swamy
19:08 Sep-17-2004
Re: detectable flaw size in aluminum
-
S.G.
06:44 Sep-13-2004
acoustic absorption of Low density polyethylene
-
yanxiang
22:51 Sep-11-2004
Re: acoustic absorption of Low density polyethylene
-
Rolf D.
23:55 Sep-11-2004
ISO standard
-
Raúl Ortiz
13:57 Sep-10-2004
testing of austenitic spot welds
-
Leon
03:49 Sep-10-2004
Re: testing of austenitic spot welds
-
Rolf D.
19:12 Sep-13-2004
Re: testing of austenitic spot welds
-
S.V.Swamy
16:08 Sep-12-2004
Helium Leak Test.
-
tammatthews
00:37 Sep-09-2004
Re: Helium Leak Test.
-
Jim Knowles
10:43 Sep-16-2004
Re: Helium Leak Test.
-
Dent McIntyre
09:29 Sep-17-2004
MT Field Strength Equation
-
Anonymous
13:55 Sep-08-2004
Re: MT Field Strength Equation
-
DJ Kallhof
13:02 Sep-09-2004
SLOFEC Floorscanner
-
Dean Miller
02:27 Sep-08-2004
Re: SLOFEC Floorscanner
-
Ingo Becker
16:45 Sep-08-2004
Part identity recognition
-
David Harvey
01:14 Sep-08-2004
Re: Part identity recognition
-
Phil Herman Jr.
01:56 Sep-08-2004
Re: Part identity recognition
-
S.V.Swamy
16:47 Sep-08-2004
SAW and ERW pipes - standards
-
Micha
14:55 Sep-07-2004
Re: SAW and ERW pipes - standards
-
Ed T.
05:21 Sep-08-2004
Stress wave of wood
-
David
17:37 Sep-05-2004
ut test
-
Ali Fasih
12:41 Sep-05-2004
Re: ut test
-
Udo Schlengermann
11:10 Sep-06-2004
HIC Grids
-
Abdulla
18:26 Sep-03-2004
Radiation Monitor for NORM
-
Sam Azoka Onyechi
13:59 Sep-03-2004
looking for Manual of krautkramer USL-48
-
PTH
08:10 Sep-03-2004
Re: looking for Manual of krautkramer USL-48
-
Sri
18:32 Sep-03-2004
How to set up metric unit on DM2
-
PTH
20:06 Sep-04-2004
Re: How to set up metric unit on DM2
-
David LAVASTRE
11:35 Sep-05-2004
Re: How to set up metric unit on DM2
-
Fred Raco, Jr.
15:53 Sep-06-2004
Transducer source - need address
-
David Harvey
16:14 Sep-02-2004
Re: Transducer source - need address
-
Rolf Diederichs
19:49 Sep-02-2004
allied materials
-
adnan kazmi
20:50 Sep-01-2004
WELDING TEST
-
abdulla
16:42 Sep-01-2004
Re: WELDING TEST
-
Ed T.
08:24 Sep-02-2004
Re: WELDING TEST
-
S.G.
06:07 Sep-02-2004
UT standard ETTC 7
-
Tamara Vugrin
10:01 Sep-01-2004
Re: UT standard ETTC 7
-
Udo Schlengermann
16:17 Sep-01-2004
Limits of accurcacy with TOFD
-
Sri
23:01 Aug-30-2004
Re: Limits of accurcacy with TOFD
-
Ed Ginzel
00:54 Sep-08-2004
Thanks for responding: Limits of accurcacy with TOFD
-
Srikanth Ramachandran
19:00 Sep-08-2004
Helium leak testing
-
Tim Milligan
15:31 Aug-30-2004
Re: Helium leak testing
-
Jim Knowles
09:02 Aug-31-2004
Ultrasonic inspection of small diameter ERW tubes.
-
S.G.
09:50 Aug-30-2004
Re: Ultrasonic inspection of small diameter ERW tubes.
-
Fred Beck
14:04 Aug-31-2004
CENTEST TUBE TEST EQUIPMENT
-
Panos
06:05 Aug-29-2004
Re: CENTEST TUBE TEST EQUIPMENT
-
Marcel Vanderslik
01:57 Sep-01-2004
Re: CENTEST TUBE TEST EQUIPMENT
-
Doug Breeze
13:23 Aug-31-2004
Transfer Values / Defect Ratings (Indication Level)
-
ndt1
22:22 Aug-27-2004
I Need Help about "Inspection Plans for Welding Seams"
-
Tugrul TURGUT
12:46 Aug-24-2004
Re: I Need Help about "Inspection Plans for Welding Seams"
-
Mike Trinidad
07:34 Aug-25-2004
Re: I Need Help about "Inspection Plans for Welding Seams"
-
Tugrul TURGUT
22:12 Aug-25-2004
Re: I Need Help about "Inspection Plans for Welding Seams"
-
Mike Trinidad
04:47 Aug-26-2004
regarding heat exchanger
-
sandeep
12:51 Aug-27-2004
Hi, saludos
-
Ricardo
04:07 Aug-26-2004
Re: Hi, saludos
-
Ed T.
10:41 Aug-26-2004
HIC
-
Abdulla
17:28 Aug-23-2004
Re: HIC
-
John O'Brien
11:08 Aug-25-2004
Re: HIC
-
Mike Trinidad
05:04 Aug-26-2004
Re: HIC
-
Mike Trinidad
06:40 Aug-24-2004
the sound path in solid with temperature graident
-
Jason
17:17 Aug-22-2004
Re: the sound path in solid with temperature graident
-
Ed T.
05:17 Aug-23-2004
Detection of inclusions in sheet steels by magnetic particle inspection.
-
kamran azari
13:39 Aug-22-2004
Re: Detection of inclusions in sheet steels by magnetic particle inspection.
-
Sandro
09:21 Aug-23-2004
Re: Detection of inclusions in sheet steels by magnetic particle inspection.
-
Joe Buckley
23:02 Aug-22-2004
Pattern Recognition
-
CADHV
05:15 Aug-21-2004
Re: Pattern Recognition
-
Terry Oldberg
00:38 Sep-08-2004
UT
-
alex
10:17 Aug-17-2004
Re: UT
-
Uli Mletzko
16:20 Aug-17-2004
magnetic particle inspection
-
kishor pherwani
16:42 Aug-16-2004
Re: magnetic particle inspection
-
Simon Amallraja
19:25 Aug-18-2004
RE: UT longitudinal wave velocity tables
-
Balachander L
10:13 Aug-13-2004
Ultrasonic interference, acoustic noise
-
Kwok
17:18 Aug-12-2004
Re: Ultrasonic interference, acoustic noise
-
Balachander L
09:30 Aug-13-2004
Portable Alloy Analyzer
-
Ali Abrar
08:22 Aug-11-2004
Re: Portable Alloy Analyzer
-
Joe Buckley
12:27 Aug-23-2004
Re: Portable Alloy Analyzer
-
Bud
22:07 Aug-11-2004
Surface waves
-
Jeff
21:54 Aug-10-2004
Re: Surface waves
-
Godfrey Hands
09:51 Aug-11-2004
Re: Surface waves
-
Christopher Dragan
07:53 Aug-11-2004
Re: Surface waves
-
Guest
23:26 Aug-10-2004
Re: Surface waves
-
ii
07:41 Aug-13-2004
REGARDING THE TIME OF FLIGHT DIFFRACTION TECHNIQUE
-
sandeep pawar
13:33 Aug-09-2004
UT Longitudional Wave Velocity Tables
-
Rich Roberts
01:28 Aug-06-2004
Re: UT Longitudional Wave Velocity Tables
-
m.prabhakaran
11:11 Oct-07-2004
Re: UT Longitudional Wave Velocity Tables
-
Don
10:56 Aug-11-2004
Re: UT Longitudional Wave Velocity Tables
-
Balachander L
10:12 Aug-13-2004
Re: UT Longitudional Wave Velocity Tables
-
Balachander L
10:11 Aug-13-2004
Re: UT Longitudional Wave Velocity Tables
-
Balachander L
10:11 Aug-13-2004
Re: UT Longitudional Wave Velocity Tables
-
Balachander. L
10:10 Aug-13-2004
Re: UT Longitudional Wave Velocity Tables
-
Balachander L
10:10 Aug-13-2004
Re: UT Longitudional Wave Velocity Tables
-
Balachander L
10:06 Aug-13-2004
Need Help With A Transducer Design
-
Ron Hubbard
08:22 Aug-04-2004
Re: Need Help With A Transducer Design
-
Wolfgang Bisle
17:08 Aug-04-2004
Re: Need Help With A Transducer Design
-
Ron Hubbard
08:36 Aug-13-2004
Re: Need Help With A Transducer Design
-
Ron Hubbard
08:31 Aug-13-2004
Re: Need Help With A Transducer Design
-
Ron Hubbard
08:27 Aug-13-2004
regarding the tofd method!!!!!!!!!!!111
-
SANDEEP A PAWAR
13:01 Aug-03-2004
PT Type 1 or Type 2 reference block
-
John Traynor
15:14 Aug-02-2004
Re: PT Type 1 or Type 2 reference block
-
John Traynor
09:53 Sep-29-2004
UT of Bimetallic Tubing
-
David Harvey
16:57 Jul-28-2004
Re: UT of Bimetallic Tubing
-
Eric chen
11:50 Aug-02-2004
Re: UT of Bimetallic Tubing
-
J. Mark Davis
23:04 Jul-28-2004
Magnetic Wheels
-
Cesar Boynard
19:22 Jul-27-2004
API PR579
-
Tomas Perez A.
03:47 Jul-26-2004
Re: API PR579
-
Mike Trinidad
14:26 Aug-10-2004
Re: API PR579
-
John O'Brien
17:29 Aug-04-2004
Materials used in probe shoes
-
Philippe Rubbers
16:45 Jul-23-2004
acoustical holography
-
Z.H
21:51 Jul-22-2004
Calculation of the focus-width of a focused ultrasonic transducer
-
Dipl.-Ing. Martin Heinz
17:20 Jul-22-2004
Re: Ultrasonic beam profiles for angle probes in steel
-
Don
18:02 Jul-21-2004
phased Array transducer applications?
-
Zahra
17:38 Jul-21-2004
Re: phased Array transducer applications?
-
Ed Ginzel
03:00 Jul-22-2004
transducers andits place in instrumentation,control and automation
-
adewale
12:12 Sep-24-2004
Re: phased Array transducer applications?
-
Wolfgang Bisle
19:11 Aug-03-2004
Acoustic couplant
-
Ashkan Safari
15:52 Jul-20-2004
defects on bearingraceways
-
xander
15:22 Jul-20-2004
Re: defects on bearingraceways
-
Godfrey Hands
15:05 Jul-22-2004
AUT, ECA and Linear Interpolation
-
Ed T.
06:23 Jul-20-2004
Re: AUT, ECA and Linear Interpolation
-
Uli Mletzko
18:09 Jul-20-2004
Re: AUT, ECA and Linear Interpolation
-
Ed Ginzel
20:17 Jul-20-2004
Re: AUT, ECA and Linear Interpolation
-
Isotope75
09:32 Jul-20-2004
Re: AUT, ECA and Linear Interpolation
-
Ed T.
10:05 Jul-20-2004
Spread Spectrum Ultrasonic
-
Omar Aly
11:18 Jul-19-2004
Re: Spread Spectrum Ultrasonic
-
Philippe Rubbers
17:27 Jul-19-2004
Ultrasonic beam profiles for angle probes in steel
-
Don
16:03 Jul-15-2004
Re: Ultrasonic beam profiles for angle probes in steel
-
Ed T.
21:39 Jul-20-2004
Re: Ultrasonic beam profiles for angle probes in steel
-
Ed Ginzel
23:00 Jul-20-2004
Re: Ultrasonic beam profiles for angle probes in steel
-
IClampers
01:51 Jul-20-2004
Re: Ultrasonic beam profiles for angle probes in steel
-
Ed T.
05:58 Jul-20-2004
Re: Ultrasonic beam profiles for angle probes in steel
-
Udo Schlengermann
14:30 Jul-16-2004
Re: Ultrasonic beam profiles for angle probes in steel
-
Ed Ginzel
19:18 Jul-20-2004
Re: Ultrasonic beam profiles for angle probes in steel
-
Godfrey Hands
09:17 Jul-16-2004
Book on wave propagation in thin plates
-
Frank Schaefer
10:55 Jul-12-2004
Re: Book on wave propagation in thin plates
-
James Barshinger
14:32 Jul-12-2004
ON STREAM INSPECTION
-
Abdulla M. Benamer
11:49 Jul-11-2004
Piezoelectric crystal
-
Vikas
11:29 Jul-11-2004
How to distinguish inside and outside flaw of pipe by MFL?
-
x.j.
05:47 Jul-09-2004
Re: How to distinguish inside and outside flaw of pipe by MFL?
-
fs
12:38 Jul-09-2004
Re: How to distinguish inside and outside flaw of pipe by MFL?
-
MIC
06:15 Jul-12-2004
Impulse response
-
S. Manohar
17:20 Jul-06-2004
Re: Impulse response
-
S. Manohar
09:15 Jul-07-2004
Re: Impulse response
-
C.Noelle
07:59 Jul-07-2004
permeability testing
-
Hokan
15:43 Jul-05-2004
acoustic output test- URGENT!
-
Moyra
10:35 Jun-24-2004
FLOW LINE INSPECTION
-
A.M.Benamer
17:56 Jun-20-2004
Re: FLOW LINE INSPECTION
-
John O'Brien
20:50 Jun-23-2004
Re: FLOW LINE INSPECTION
-
Randy Di Lallo
19:11 Jun-21-2004
Re: FLOW LINE INSPECTION
-
Carsten Moeller
10:55 Jun-22-2004
Re: FLOW LINE INSPECTION
-
Rod
19:34 Jun-21-2004
Re: FLOW LINE INSPECTION
-
Joel Light
21:08 Jun-21-2004
THIRD PARTY INSPECTION
-
A.M. BENAMER
15:47 Jun-19-2004
Re: THIRD PARTY INSPECTION
-
JDM
14:36 Jun-29-2004
Re: THIRD PARTY INSPECTION
-
Juan J. Amado
16:09 Jun-29-2004
Re: THIRD PARTY INSPECTION
-
jawed akhter
20:35 Jun-24-2004
Re: THIRD PARTY INSPECTION
-
ET
09:44 Jun-26-2004
Re: THIRD PARTY INSPECTION
-
Juan Amado
15:30 Jun-27-2004
Re: THIRD PARTY INSPECTION
-
Joel Light
16:04 Jun-28-2004
Re: THIRD PARTY INSPECTION
-
ET
18:08 Jun-28-2004
Re: THIRD PARTY INSPECTION
-
ET
09:50 Jun-28-2004
Urea Titanium Stripper Eddy Current
-
Ali Abrar
14:28 Jun-17-2004
Re: Urea Titanium Stripper Eddy Current
-
Brian Shannon
17:02 Jun-17-2004
Re: Urea Titanium Stripper Eddy Current
-
andrey
15:47 Jul-12-2004
How to design a piezocomposite transducer?
-
X. Chen
12:23 Jun-17-2004
Re: How to design a piezocomposite transducer?
-
Paul A. Meyer
12:53 Jun-21-2004
Re: How to design a piezocomposite transducer?
-
X. Chen
23:13 Jun-21-2004
marketing research
-
Jonker
14:09 Jun-13-2004
ultrasonic testing equipment needed
-
Pavel Lozovyy
20:25 Jun-10-2004
NDT of oxidised root welds
-
S S Ananthan
13:47 Jun-04-2004
Re: NDT of oxidised root welds
-
S.V.Swamy
16:11 Jun-08-2004
Re: NDT of oxidised root welds
-
NAT
21:25 Jun-14-2004
Re: NDT of oxidised root welds
-
Gary Woodside
22:10 Jun-14-2004
Re: NDT of oxidised root welds
-
Floyd Atkinson
15:28 Jun-05-2004
Terahertz for NDT
-
wolfgang.bisle
16:17 Jun-03-2004
Re: Terahertz for NDT
-
Michael Suits
15:25 Jun-04-2004
Attenuation measurments to check for hydrogen attack
-
Jim McGregor
01:23 Jun-02-2004
Re: Attenuation measurments to check for hydrogen attack
-
Kasper Pols
09:35 Jun-02-2004
Re: Attenuation measurments to check for hydrogen attack
-
Jan Verkooijen
14:28 Jun-02-2004
Re: Attenuation measurments to check for hydrogen attack
-
Sasaki
03:34 Jun-02-2004
3d ultrasonic inspection
-
RASHID SULTAN
06:41 Jun-01-2004
NDT method selection on SS Vessels
-
Prasad
11:33 May-28-2004
Re: NDT method selection on SS Vessels
-
Godfrey Hands
08:23 Jun-01-2004
NDT method selection on SS Vessels
-
R J Chaudhari
03:56 Jun-02-2004
Re: NDT method selection on SS Vessels
-
J. Mark Davis
11:59 Jun-02-2004
Re: NDT method selection on SS Vessels
-
D.Simon Amallraja
14:58 May-31-2004
Inspecting the gas station tanks
-
Mohamed Nassef
13:36 May-24-2004
Ultrasonic C-scan image quality. Makes it sense?
-
C. Valdecantos
13:08 May-24-2004
Re: Ultrasonic C-scan image quality. Makes it sense?
-
Godfrey Hands
08:44 May-25-2004
Re: Ultrasonic C-scan image quality. Makes it sense?
-
Ed Ginzel
23:26 May-24-2004
Re: Ultrasonic C-scan image quality. Makes it sense?
-
Jean-Louis ARNAUD
08:47 May-25-2004
Re: Ultrasonic C-scan image quality. Makes it sense?
-
Carlos Valdecantos
13:07 May-25-2004
Isovolt 160TL X-ray Equipment
-
omar a . rugebani
18:12 May-23-2004
Re: Isovolt 160TL X-ray Equipment
-
Ilya Galeev
16:26 Jul-06-2004
Re: Isovolt 160TL X-ray Equipment
-
Troy Foster
22:18 May-25-2004
Re: Isovolt 160TL X-ray Equipment
-
Ulrich Mletzko
12:33 May-25-2004
piezocermaic transformer construction
-
nishanth K,
19:39 May-21-2004
corrosion of carbon steel
-
Balachander Lakshminarayan
09:15 May-19-2004
Re: corrosion of carbon steel
-
Sasaki
10:19 May-24-2004
Author (experts) help is needed urgently!!!!
-
elgazery
10:04 May-18-2004
Authorized Inspector
-
NAT
15:19 May-16-2004
Re: Authorized Inspector
-
vernon ward
15:16 May-17-2004
Re: Authorized Inspector
-
NAT
09:21 May-30-2004
Re: Authorized Inspector
-
llpcode
23:18 Jun-08-2004
Re: Authorized Inspector
-
NAT
16:20 Jun-14-2004
U/T training
-
bert smith
22:24 May-15-2004
Re: U/T training
-
Fiorenzo Sorcinelli
16:24 May-19-2004
Re: U/T training
-
colin
23:09 May-19-2004
Re: U/T training
-
Dave
06:53 May-18-2004
Re: U/T training
-
Ed Ginzel
02:17 May-25-2004
Re: U/T training
-
Hector Wylde
22:21 May-31-2004
Re: U/T training
-
bert
22:06 May-31-2004
Re: U/T training
-
S.V.Swamy
03:19 May-26-2004
Re: Cast Steel
-
James Dolfi
00:36 May-27-2004
Re: Cast Steel
-
ian
14:16 Jul-21-2004
Re: Cast Steel
-
Ed T.
05:28 Jul-22-2004
Re: U/T training
-
bert smith
23:34 May-19-2004
Re: U/T training
-
Danial Carlson
10:23 May-20-2004
Cast Steel
-
Chris Chilton
12:38 May-14-2004
Re: Cast Steel
-
emily woo
12:28 May-26-2004
Re: Cast Steel
-
James Dolfi
00:36 May-27-2004
Re: Cast Steel
-
ian
14:16 Jul-21-2004
Re: Cast Steel
-
Ed T.
05:28 Jul-22-2004
Ultrasonic Testing of Adhesive Bonds
-
John Wagner
14:46 May-12-2004
Re: Ultrasonic Testing of Adhesive Bonds
-
Richard Kazares
16:00 May-13-2004
Re: Ultrasonic Testing of Adhesive Bonds
-
John O'Brien
23:39 May-12-2004
heat exchanger replacement
-
hairul
10:32 May-12-2004
Re: heat exchanger replacement
-
Sasaki
07:41 May-14-2004
Measure Tensil test by NDT
-
Mahmoud Mhamed
17:32 May-10-2004
Measure Tensil test for clips
-
Joaquin Toba
18:30 Aug-27-2004
Re: Measure Tensil test by NDT
-
elgazery
10:13 May-18-2004
UTT of PTFE Lined pipewo