Back to: FORUM

NDT.net Home Exhibition Virtual Library Events NDT Encyclopedia Abstracts Books Journals Archive Search

Technical Discussions: Archive 2006 Seeking Solutions, Seeking Explanation etc.

Thread View [Post a Message]

flourescent screen in high thk - balwinder singh 12:16 Dec-27-2006 Digital radiography - Dao Duy Tuan 11:22 Dec-22-2006 Re: Digital radiography - Kari Latvala 10:46 Jan-10-2007 NDT Information - Shoaib Anwar 06:34 Dec-22-2006 Crank Shaft Failure Analysis - Ali 07:22 Dec-21-2006 Air Receiver Rerating - Shoaib Anwar 19:28 Dec-17-2006 Re: Air Receiver Rerating - John O'Brien 16:02 Dec-18-2006 TOFD - Calibration Block - Paulo 18:51 Dec-13-2006 weld inspection - hcumbaa 12:53 Dec-12-2006 Re: weld inspection - Roberto Falconio 05:01 Dec-13-2006 Re: weld inspection - Herbert Cumbaa 13:12 Dec-19-2006 ECT MaxRate question - Zoran Stanic 08:59 Dec-05-2006 TOFD 190mm thickness! - Paulo 19:40 Nov-30-2006 Re: TOFD 190mm thickness! - John 02:39 Dec-01-2006 Re: TOFD 190mm thickness! - Udo Schlengermann 10:33 Dec-04-2006 why TOFD cursor is parabola? - John 03:22 Nov-28-2006 Re: why TOFD cursor is parabola? - John 16:32 Dec-07-2006 Re: why TOFD cursor is parabola? - Nigel 09:06 Dec-09-2006 Re: why TOFD cursor is parabola? - John 03:30 Dec-11-2006 Re: why TOFD cursor is parabola? - Nigel 12:42 Dec-11-2006 Re: why TOFD cursor is parabola? - Ed Ginzel 13:15 Dec-11-2006 Re: why TOFD cursor is parabola? - John 16:32 Dec-07-2006 Re: why TOFD cursor is parabola? - Nigel 09:06 Dec-09-2006 Re: why TOFD cursor is parabola? - John 03:30 Dec-11-2006 Re: why TOFD cursor is parabola? - Nigel 12:42 Dec-11-2006 Re: why TOFD cursor is parabola? - Ed Ginzel 13:15 Dec-11-2006 Re: why TOFD cursor is parabola? - Ed Ginzel 13:28 Nov-28-2006 Re: why TOFD cursor is parabola? - John 03:04 Nov-29-2006 Re: why TOFD cursor is parabola? - Ed Ginzel 15:37 Nov-29-2006 Re: why TOFD cursor is parabola? - John 04:03 Nov-30-2006 Re: why TOFD cursor is parabola? - Nigel 09:00 Nov-30-2006 Re: why TOFD cursor is parabola? - Ed Ginzel 17:28 Nov-30-2006 Exposure with Cobalt 60 - Mike 07:32 Nov-25-2006 Re: Exposure with Cobalt 60 - DJ Kallhof 12:55 Nov-27-2006 Re: Exposure with Cobalt 60 - DJ Kallhof 13:16 Nov-27-2006 Re: Exposure with Cobalt 60 - Anandam 07:04 Nov-26-2006 LORAD 160 DIFFICULTY-HELP! - Becky 03:43 Nov-21-2006 Re: LORAD 160 DIFFICULTY-HELP! - Martyn 20:03 Nov-30-2006 test homogeneity tube rx pano - Lardinois Pascal 20:14 Nov-19-2006 Fluid and thermal Engineering - Hadi 17:37 Nov-18-2006 mandatory - hamed 15:34 Nov-18-2006 Corelation to measue pipe wall thickness with process temperature - krish 08:37 Nov-17-2006 Re: Corelation to measue pipe wall thickness with process temperature - S.V.Swamy 14:30 Nov-20-2006 Re: Corelation to measue pipe wall thickness with process temperature - P V SASTRY 21:53 Nov-20-2006 Re: Corelation to measue pipe wall thickness with process temperature - krish 10:34 Nov-21-2006 Re: Corelation to measue pipe wall thickness with process temperature - S.V.Swamy 15:14 Nov-21-2006 Tank floor scanning - krish 11:14 Nov-16-2006 Re: Tank floor scanning - Alan Ashton 09:26 Nov-17-2006 Re: Tank floor scanning - Sunil N. Ramchandran 14:59 Nov-16-2006 How to measure the depth for case hardened steel? - Chris 16:35 Nov-13-2006 Re: How to measure the depth for case hardened steel? - Michael Dalichow 18:32 Nov-15-2006 Re: How to measure the depth for case hardened steel? - Chris 22:31 Nov-15-2006 Re: How to measure the depth for case hardened steel? - Sayed H. El-Nekhaly 06:15 Nov-15-2006 Re: How to measure the depth for case hardened steel? - Nigel 16:33 Nov-14-2006 Re: How to measure the depth for case hardened steel? - Chris 22:50 Nov-14-2006 Re: How to measure the depth for case hardened steel? - Chris 22:50 Nov-14-2006 Re: How to measure the depth for case hardened steel? - Phil Thayer 20:53 Nov-14-2006 Re: How to measure the depth for case hardened steel? - Chris 22:57 Nov-14-2006 Re: How to measure the depth for case hardened steel? - Phil 14:38 Nov-15-2006 Re: How to measure the depth for case hardened steel? - Chris 22:28 Nov-15-2006 Strain gauge protection for FPI - Joerg 10:55 Nov-07-2006 Re: Strain gauge protection for FPI - Bob Cully 12:57 Nov-07-2006 USM 35 portable ultrasonic flaw detector - Sergio Antonio Jensen 13:02 Nov-06-2006 Re: USM 35 portable ultrasonic flaw detector - David 10:06 Nov-07-2006 Re: USM 35 portable ultrasonic flaw detector - Mark Potter 15:03 Nov-06-2006 Re: USM 35 portable ultrasonic flaw detector - Sergio Antonio Jensen 14:08 Nov-07-2006 Re: USM 35 portable ultrasonic flaw detector - Mark Potter 10:35 Nov-13-2006 USM 35 Portable Ultrasonic Flaw Detector - Sergio Jensen 12:52 Nov-06-2006 Pipeline inspection - Andre van Vuuren 11:54 Nov-04-2006 Re: Pipeline inspection - G.Madhesan 10:43 Mar-15-2007 Re: Pipeline inspection - JW 05:30 Mar-19-2007 Re: Pipeline inspection - mj 09:50 Nov-08-2006 Re: Pipeline inspection - Roberto Falconio 15:40 Nov-04-2006 TCG CURVE - DEBDUTTA MALLIK 09:25 Nov-02-2006 Re: TCG CURVE - Joe Buckley 19:44 Nov-06-2006 Re: TCG CURVE - Ed Ginzel 02:03 Nov-07-2006 Re: TCG CURVE - Linxiao 18:37 Nov-06-2006 Re: TCG CURVE - Linxiao 18:37 Nov-06-2006 Probe SE 18/16 - Joerg Neubert 18:05 Oct-25-2006 Riser inspection - Azmi Hussain 08:08 Oct-18-2006 Re: Riser inspection - Azmir 07:50 Dec-04-2006 Re: Riser inspection - Jim Yukes 15:41 Dec-15-2006 Re: Riser inspection - Richard Kazares 19:43 Dec-15-2006 Re: Riser inspection - John O'Brien 16:13 Dec-18-2006 Re: Riser inspection - Godfrey Hands 08:32 Oct-21-2006 Re: Riser inspection - Sunil N. Ramchandran 18:56 Oct-18-2006 Re: Riser inspection - Richard Kazares 18:01 Oct-18-2006 mandatory - tomas perez a. 12:53 Oct-12-2006 Re: mandatory - Code Guy 18:39 Oct-12-2006 Re: mandatory - hjkim 13:30 Oct-12-2006 Looking for root erosion in thin-walled duplex stainless steel welds - Nigel 10:14 Oct-12-2006 Re: Looking for root erosion in thin-walled duplex stainless steel welds - Sayed H. El-Nekhaly 05:52 Oct-20-2006 Give me a definite answer please. - hjkim 09:47 Oct-12-2006 Re: Give me a definite answer please. - Nigel 10:46 Oct-12-2006 profile radiography - krish 09:27 Oct-11-2006 Re: profile radiography - Jim Kovarik 15:35 Oct-18-2006 Re: profile radiography - Nigel 15:20 Oct-13-2006 Re: profile radiography - N.Kuppusamy 08:40 Oct-19-2006 Re: profile radiography - S.V.Swamy 17:34 Oct-11-2006 Re: profile radiography - krish 04:14 Oct-17-2006 Re: profile radiography - To Whom itconcerns 01:37 Oct-18-2006 Re: profile radiography - Simon Amallraja 17:55 Nov-05-2006 Probe speed - Charlie Jackson 19:29 Oct-05-2006 Computed Radiography - J Mauricio B Rabello 02:50 Oct-05-2006 Re: Computed Radiography - Prasad 11:47 Oct-05-2006 Re: Computed Radiography - Christoph Schnitger 11:24 Oct-05-2006 Inspection underneath riser clamps - Prasad 04:57 Oct-02-2006 Re: Inspection underneath riser clamps - Godfrey Hands 18:16 Oct-02-2006 Re: Inspection underneath riser clamps - Paul Robertson 21:37 Oct-08-2006 TOFD for Coner joint - J.H.Lee 07:15 Sep-30-2006 Re: TOFD for Coner joint - Simon Amallraja 19:14 Oct-01-2006 Re: TOFD for Coner joint - Ed Ginzel 15:55 Sep-30-2006 Coating thickness - Dave Webb 16:00 Sep-28-2006 Re: Coating thickness - Tom Nelligan 22:31 Sep-28-2006 Acoustic Emission - S S Gupta 13:56 Sep-28-2006 Re: Acoustic Emission - Jens Forker 17:45 Sep-28-2006 EN10160 for UT - j.h.lee 05:12 Sep-27-2006 Re: EN 10160 for UT - Udo Schlengermann 11:04 Oct-02-2006 TOFD notches - Ed Ginzel 16:53 Sep-23-2006 Re: TOFD notches - Nigel Armstrong 14:19 Sep-25-2006 Re: TOFD notches - Ed Ginzel 14:25 Sep-26-2006 Tap Hammers - Ron Olson 00:02 Sep-23-2006 Re: Tap Hammers - Roberto Falconio 15:36 Sep-24-2006 SNDT Software - Sayed H. El-Nekhaly 17:50 Sep-19-2006 Need information about inspection welding criteria - Rolando Perez Hernandez 13:55 Sep-07-2006 Re: Need information about inspection welding criteria - Vikas Dighe 10:09 Sep-23-2006 Re: Need information about inspection welding criteria - Eng.Ahmad 21:21 Jan-16-2007 Phased arrey - Daniel 22:25 Sep-06-2006 Re: Phased arrey - Simon Amallraja 19:24 Sep-08-2006 Re: Phased arrey - rashid 08:23 Nov-02-2006 Re: Phased Array - KMP 15:48 Nov-25-2006 Re: Phased Array - shayegan 17:58 Nov-27-2006 Re: Phased arrey - Christoph Schnitger ( TCP Prüftechnik ) 22:08 Sep-07-2006 Re: Phased arrey - Michael Moles 23:20 Sep-08-2006 Re: Phased arrey - Joe Buckley 00:08 Sep-09-2006 Re: Phased arrey - Michael Moles, Olympus NDT 19:33 Sep-07-2006 EMATS - M.eskandarzade 15:53 Sep-06-2006 Re: EMATS - M.Eskandarzade 15:59 Sep-06-2006 THIN COMPOSITE MATERIAL - UT - RT. JEYAKUMAR 11:43 Sep-06-2006 Re: THIN COMPOSITE MATERIAL - UT - Simon Amallraja 19:17 Sep-08-2006 UT Inspection of Tubing - Sunny 19:05 Sep-05-2006 Re: UT Inspection of Tubing - Fred Beck 14:06 Sep-06-2006 Re: UT Inspection of Tubing - David Mackintosh 19:36 Sep-05-2006 TOFD Hyperbolic cursor - Roberto Carlos Giacchetta 15:24 Sep-04-2006 Re: TOFD Hyperbolic cursor - David Mackintosh 22:10 Sep-06-2006 Re: TOFD Hyperbolic cursor - David Mackintosh 00:00 Sep-06-2006 Holography - Toni Hakkarainen 11:19 Sep-04-2006 Subsea inspection - Albert 09:13 Sep-04-2006 Re: Subsea inspection - Martin Lugg 14:46 Sep-19-2006 Re: Subsea inspection - Albert 06:26 Sep-18-2006 Re: Subsea inspection - Esteban Melgar 10:31 Sep-29-2006 Re: Subsea inspection - Simon Amallraja 19:02 Sep-18-2006 Re: Subsea inspection - Richard Kazares 16:37 Sep-18-2006 eddy current weld inspection - saju 16:11 Aug-31-2006 Re: eddy current weld inspection - Neil Burleigh 00:31 Sep-01-2006 Pulsed transducer for constant output - Craig Dobson 21:48 Aug-30-2006 Re: Pulsed transducer for constant output - Craig Dobson 19:49 Sep-07-2006 Re: Pulsed transducer for constant output - Joe Buckley 09:00 Aug-31-2006 Re: Pulsed transducer for constant output - Ed Ginzel 16:11 Aug-31-2006 EMAT paper collaboration - m.eskandarzade 16:59 Aug-28-2006 D.A.E in machenical - syed waqar-ul-hassan 15:55 Aug-28-2006 Question about NDT of glasses - hosein poursabbagh 13:33 Aug-26-2006 Re: Question about NDT of glasses - Tom Nelligan 17:03 Aug-29-2006 characterestic curve - V.JAGADISH 11:41 Aug-24-2006 exposure without lead screen - V.JAGADISH 11:35 Aug-24-2006 back scatter clarification - V.JAGADISH 11:30 Aug-24-2006 Re: back scatter clarification - P V SASTRY 21:31 Aug-25-2006 API RP 2X Equivalent - William Blum 18:19 Aug-23-2006 sizing - herb cumbaa 13:32 Aug-23-2006 Re: sizing - herb cumbaa 17:47 Aug-24-2006 Re: sizing - Philippe Rubbers 14:55 Aug-23-2006 Re: sizing - Old UT guy 14:23 Aug-23-2006 Re: sizing - herb cumbaa 15:58 Aug-23-2006 Re: sizing - Neil Burleigh 01:44 Aug-24-2006 Re: sizing - MW Moyer 22:58 Aug-23-2006 DM4 maintenace - Tomás Pérez A. 02:57 Aug-23-2006 Re: DM4 maintenace - Udo Schlengermann 12:05 Aug-23-2006 light or black image B - jagadish 11:22 Aug-22-2006 Re: light or black image B - Arun 17:45 Aug-22-2006 Re: light or black image B - RT Guy 12:19 Aug-22-2006 back scatter radiation - V.JAGADISH 13:50 Aug-21-2006 Re: back scatter radiation - RT Guy 14:02 Aug-21-2006 Re: back scatter radiation - P V SASTRY 21:12 Aug-21-2006 EMAT in iran - m.eskandarzade 17:53 Aug-19-2006 ASME cal block sizes for piping - David Mackintosh 18:00 Aug-18-2006 Re: ASME cal block sizes for piping - Nigel Armstrong 06:33 Aug-19-2006 Re: ASME cal block sizes for piping - UT Guy 12:38 Aug-19-2006 Re: ASME cal block sizes for piping - UT Guy 12:44 Aug-19-2006 Re: ASME cal block sizes for piping - Nigel Armstrong 09:58 Aug-20-2006 Re: ASME cal block sizes for piping - Ed Ginzel 22:18 Aug-21-2006 Re: ASME cal block sizes for piping - Nigel Armstrong 08:05 Aug-23-2006 Re: ASME cal block sizes for piping - E. Ginzel 13:44 Aug-26-2006 Re: ASME cal block sizes for piping - Nigel Armstrong 12:38 Aug-29-2006 API 650-Telltale Hole in Reinforcement Pad - Prakash Kamath 17:17 Aug-18-2006 Re: API 650-Telltale Hole in Reinforcement Pad - John O'Brien 20:31 Aug-22-2006 BP's pipeline testing - Rolf D. 16:51 Aug-15-2006 Re: BP's pipeline testing - Rolf D. 14:00 Aug-16-2006 Re: BP's pipeline testing - Godfrey Hands 14:36 Aug-16-2006 Re: BP's pipeline testing - singhal sk 07:54 Mar-23-2007 Re: BP's pipeline testing - Godfrey Hands 12:43 Aug-16-2006 Re: BP's pipeline testing - Old UT guy 16:09 Aug-17-2006 Re: BP's pipeline testing - John Pursley 20:13 Aug-18-2006 Re: BP's pipeline testing - M. Kim Johnson 19:31 Aug-18-2006 Re: BP's pipeline testing - Paul Robertson 22:46 Aug-18-2006 Re: BP's pipeline testing - Old UT Guy 15:40 Aug-22-2006 Re: BP's pipeline testing - Rich Roberts 17:39 Aug-15-2006 who can give me the dispersion equation of the guided wave? - miveb 12:57 Aug-15-2006 Thciknesstesting of Paint on CFRP or Plastic - Wolfgang Bisle 10:38 Aug-15-2006 Looking for robust coupling device/method for contact auto-UT inspection - Linxiao Yu 20:25 Aug-14-2006 Re: Looking for robust coupling device/method for contact auto-UT inspection - Mark Potter 11:00 Aug-15-2006 Re: Looking for robust coupling device/method for contact auto-UT inspection - Linxiao Yu 15:38 Aug-16-2006 Re: Looking for robust coupling device/method for contact auto-UT inspection - Paul Heckman 10:00 Aug-15-2006 Re: Looking for robust coupling device/method for contact auto-UT inspection - Wolfgang Bisle 09:59 Aug-15-2006 Re: Looking for robust coupling device/method for contact auto-UT inspection - Linxiao Yu 16:53 Aug-16-2006 Re: Looking for robust coupling device/method for contact auto-UT inspection - Nigel Armstrong 11:42 Aug-21-2006 Re: Looking for robust coupling device/method for contact auto-UT inspection - Linxiao Yu 16:52 Aug-16-2006 Re: Looking for robust coupling device/method for contact auto-UT inspection - Nigel Armstrong 11:42 Aug-21-2006 RT tangetial exposure - daniel 06:11 Aug-11-2006 Re: RT tangetial exposure - Ed M 13:32 Aug-14-2006 Equivalence - VERMOT 10:24 Aug-10-2006 ASTM Standard - Sunny 20:03 Aug-09-2006 Ultrasonic Cleaners and Star Crack Panels - Ron Olson 15:09 Aug-09-2006 DCVG Information - ibtesam 08:38 Aug-08-2006 I need calibration service for a PVDF Hydrophone - Very quickly! - Jhon Possu 21:41 Aug-07-2006 Re: I need calibration service for a PVDF Hydrophone - Very quickly! - mark lovell 23:50 Sep-21-2006 OCTG Grade sortor - Pramod Myakal 20:59 Aug-05-2006 Re: OCTG Grade sortor - Simon Amallraja 19:48 Aug-06-2006 False radiographs - p.bogatinovski 20:08 Aug-05-2006 Re: False radiographs - Neil Burleigh 02:50 Aug-07-2006 Re: False radiographs - Christoph Schnitger 17:55 Aug-06-2006 Re: False radiographs - Nigel Armstrong 06:15 Aug-06-2006 Re: False radiographs - Roberto Falconio 15:39 Aug-06-2006 Re: False radiographs - p.bogatinovski 15:02 Aug-08-2006 Re: False radiographs - Nigel Armstrong 12:15 Aug-09-2006 tank radiography - SURYA NARAYAN BHAKAT 12:32 Aug-05-2006 Notes on ASME Code case 2235-9 - David Mackintosh, Acuren 21:09 Aug-03-2006 Re: Notes on ASME Code case 2235-9 - Nigel Armstrong 05:21 Aug-06-2006 Re: Notes on ASME Code case 2235-9 - Nigel Armstrong 04:17 Aug-04-2006 Density - Jacky 19:02 Aug-03-2006 Re: Density - DJ Kallhof 20:58 Aug-03-2006 Re: Density - david 02:55 Aug-04-2006 ULTRASONIC TEST IN STAINLESS STELL - palanivelu 12:11 Aug-03-2006 burn through rt interpretation - daniel 06:28 Aug-03-2006 Re: burn through rt interpretation - Ed M. 07:42 Aug-03-2006 Conversion efficiencies of crystals - George Herrod 15:24 Aug-02-2006 High Temeprature Dye Penetrants - Mukesh Arora 13:46 Jul-31-2006 Re: High Temeprature Dye Penetrants - john 18:19 Jul-31-2006 Inpection of GGG-40 pumpbody - Kaveh Edalati 13:21 Jul-31-2006 Re: Inpection of GGG-40 pumpbody - Nigel Armstrong 04:37 Aug-03-2006 Opinions on probe designs - Kelly Phelps 21:35 Jul-29-2006 Re: Opinions on probe designs - Peter Stein 10:35 Sep-06-2006 ANDSCAN - Jayapal 06:50 Jul-29-2006 Re: ANDSCAN - Nigel Armstrong 09:49 Jul-29-2006 API 1104 Manual UT - Martyn 22:12 Jul-28-2006 Re: API 1104 Manual UT - Michael 16:40 Jul-31-2006 Re: API 1104 Manual UT - unknown 14:44 Aug-03-2006 Re: API 1104 Manual UT - David 02:25 Aug-04-2006 Re: API 1104 Manual UT - Ed Ginzel 17:26 Aug-06-2006 Re: API 1104 Manual UT - Ed 10:54 Jul-29-2006 Re: API 1104 Manual UT - Martyn 14:38 Jul-31-2006 Re: API 1104 Manual UT - Ed 16:12 Jul-31-2006 Re: API 1104 Manual UT - Martyn 16:06 Aug-03-2006 Re: API 1104 Manual UT - Kaveh Edalati 14:45 Aug-03-2006 Re: API 1104 Manual UT - Ed 14:48 Aug-03-2006 Re: API 1104 Manual UT - J. Mark Davis 20:40 Aug-03-2006 Subsea Ultrasonic Imaging - John O'Brien 21:51 Jul-28-2006 Re: Subsea Ultrasonic Imaging - Godfrey Hands 09:30 Jul-31-2006 Clad Pipe - Metallurgically Bonded - Sean 00:28 Jul-28-2006 Re: Clad Pipe - Metallurgically Bonded - Neil Burleigh 04:06 Jul-30-2006 Re: Clad Pipe - Metallurgically Bonded - Tom Nelligan 22:08 Jul-28-2006 US Dry Couplant - Alejandro Garcia 16:36 Jul-21-2006 Re: US Dry Couplant - Mark potter 17:24 Aug-01-2006 Re: US Dry Couplant - Simon Amallraja 19:45 Jul-28-2006 Resources related to UT Fatigue Crack Detection in axles from mobile equipment trailers - Jeff Phillips 02:01 Jul-21-2006 eddy current - chris 11:27 Jul-19-2006 sirena 6, crawler - p.bogatinovski 09:38 Jul-18-2006 ASME Code WPS, PQR and WPQR in Russian Language - Suleyman Halicioglu 15:18 Jul-14-2006 Round bar immersion Inspection - Sunny 15:51 Jul-13-2006 Re: Round bar immersion Inspection - Joe Buckley 21:42 Jul-13-2006 Re: Round bar immersion Inspection - Fred Beck / Tac Tecnical instrument corp. 21:24 Jul-13-2006 Assistance with Pipe Analysis - Richard Tsai 20:51 Jul-12-2006 Re: Assistance with Pipe Analysis - Nick Sowa 21:55 Jul-13-2006 CALIBRATION OF SHEAR WAVES ON A USM 25 - CAMERON 12:51 Jul-12-2006 Re: CALIBRATION OF SHEAR WAVES ON A USM 25 - Roberto Falconio 03:01 Jul-14-2006 Re: CALIBRATION OF SHEAR WAVES ON A USM 25 - David 02:13 Jul-14-2006 EMATs - M.eskandarzade 18:12 Jul-11-2006 Re: EMATs - mehdi 13:50 Jul-19-2006 weld testing bulkhead / deck penetrations - Robert McMillen 21:28 Jul-10-2006 Re: weld testing bulkhead / deck penetrations - Simon Amallraja 18:45 Jul-14-2006 Re: weld testing bulkhead / deck penetrations - S.Senthilkumar 14:31 Jul-13-2006 Re: weld testing bulkhead / deck penetrations - John Woollven 17:58 Jul-11-2006 Re: weld testing bulkhead / deck penetrations - Joe Buckley 21:47 Jul-13-2006 Re: weld testing bulkhead / deck penetrations - Joe Buckley 21:46 Jul-13-2006 TOFD Transducers - David Gonzalez 21:14 Jul-03-2006 Re: TOFD Transducers - Paul Ryan 16:32 Jul-04-2006 UT Immersion - sunny 15:12 Jun-30-2006 Re: UT Immersion - Udo Schlengermann 16:00 Jun-30-2006 Matching Layer Material for Air-Coupling @ 200-500 kHz - Ilse Ruiz 02:59 Jun-30-2006 ENDT Instrument Design - Sayed H. El-Nekhaly 16:47 Jun-29-2006 phased array ut on nodes according to rp2x - massimo 10:54 Jun-29-2006 MT Depth of penetration - Prakash 06:44 Jun-29-2006 Re: MT Depth of penetration - John 12:47 Jun-29-2006 Re: MT Depth of penetration - John Brunk 15:12 Jun-29-2006 Re: MT Depth of penetration - William Blum 10:52 Jun-29-2006 Acoustic impedance of SBR rubber - Massimiliano Pau 17:58 Jun-27-2006 Re: Acoustic impedance of SBR rubber - Tom Nelligan 20:26 Jun-27-2006 Inspection of concrete pillars - Azhar Jamil 14:31 Jun-26-2006 Re: Inspection of concrete pillars - Ernst Niederleithinger 13:42 Jun-27-2006 Re: Inspection of concrete pillars - John O'Brien 01:26 Jun-27-2006 Re: Inspection of concrete pillars - R. O. Duesing 23:47 Jun-27-2006 Re: Inspection of concrete pillars - Herman J. Quakkelsteijn 17:36 Jun-26-2006 Crack LI - Azhar Jamil 14:07 Jun-26-2006 Re: Crack LI - David 02:15 Jun-27-2006 Re: Crack LI with Thannks - Azhar Jamil 16:04 Jul-01-2006 Re: LI - Ed 04:47 Jun-27-2006 Re: Crack LI - frank 15:49 Jun-26-2006 Re: Crack LI - JohnD 15:48 Jun-26-2006 to test the surface roughness in Pipe - chris 11:22 Jun-26-2006 UT and ET INDIA - Sunny 21:01 Jun-21-2006 Re: UT and ET INDIA - Jayapal 06:54 Jul-29-2006 Re: UT and ET INDIA - Nigel Armstrong 05:16 Jun-22-2006 Re: UT and ET INDIA - N.Kuppusamy 10:25 Jun-27-2006 Re: UT and ET INDIA - Jitender Yadav 19:35 Jun-30-2006 Re: UT and ET INDIA - D.Simon Amallraja 19:20 Jul-01-2006 Re: UT and ET INDIA - mandar vinze 05:26 Jun-24-2006 UT Immersion system - Sunny 15:02 Jun-21-2006 Re: UT Immersion system - David LAVASTRE 15:47 Jun-24-2006 Re: UT Immersion system - K S Lakshmanan 07:25 Jun-24-2006 Re: UT Immersion system - Patrick Louviot 08:38 Jun-23-2006 Re: UT Immersion system - James Dolfi 15:51 Jun-23-2006 Re: UT Immersion system - Shmuel Saitowitz 15:46 Jun-22-2006 Re: UT Immersion system - Phil Thayer 14:44 Jun-22-2006 Re: UT Immersion system - Athanasios Anastasopoulos 13:44 Jun-22-2006 Re: UT Immersion system - Nigel Armstrong 05:19 Jun-22-2006 Re: UT Immersion system - Simon Amallraja 19:25 Jun-21-2006 What is ASME VIII DIVISION 1 UW-51 - chris 05:19 Jun-20-2006 Re: What is ASME VIII DIVISION 1 UW-51 - Nigel Armstrong 05:49 Jun-20-2006 Re: What is ASME VIII DIVISION 1 UW-51 - Chris 06:03 Jun-21-2006 Re: What is ASME VIII DIVISION 1 UW-51 - DJ Kallhof 13:45 Jun-22-2006 Re: What is ASME VIII DIVISION 1 UW-51 - chris 06:09 Jun-21-2006 Re: What is ASME VIII DIVISION 1 UW-51 - chris 06:06 Jun-21-2006 TOFD scanning of pipe-to-fitting welds - Nigel Armstrong 07:00 Jun-19-2006 Re: TOFD scanning of pipe-to-fitting welds - Nigel Armstrong 08:31 Aug-23-2006 Re: TOFD scanning of pipe-to-fitting welds - Dick Gray 14:54 Jun-19-2006 Re: TOFD scanning of pipe-to-fitting welds - Jan Verkooijen 11:18 Jun-19-2006 Re: TOFD scanning of pipe-to-fitting welds - Nigel Armstrong 05:45 Jun-20-2006 Re: TOFD scanning of pipe-to-fitting welds - Nigel Armstrong 07:06 Jun-19-2006 temperature coefficient (Hz/°C) of an AT cut quartz - Ould Ehssein 16:34 Jun-15-2006 Re: temperature coefficient (Hz/°C) of an AT cut quartz - Ould Ehssein 23:59 Jul-25-2006 Scientific Collaboration - Sayed H. Elnekhaly 20:13 Jun-13-2006 Beam Profile - Chad 17:30 Jun-07-2006 Re: Beam Profile - Godfrey Hands 10:57 Jun-08-2006 Re: Beam Profile - Neil Burleigh 01:57 Jun-08-2006 Re: Beam Profile - Ed Ginzel 21:03 Jun-07-2006 Air Couple Testing - Jeff Medford 18:39 Jun-06-2006 Re: Air Couple Testing - Dave Forsyth 20:01 Jun-08-2006 Re: Demagnetization - Azhar Jamil 14:10 Jun-03-2006 Re: Demagnetization - ludovic klein 11:49 Jun-07-2006 Demagnetization - Azhar Jamil 17:33 Jun-02-2006 Re: Demagnetization - K. Anandam 05:22 Jun-03-2006 creep inspection - dikdik 09:25 Jun-02-2006 ask - wave 18:08 May-31-2006 Re: ask - Jeff Medford 18:32 Jun-06-2006 Re: ask - Thomas Murphy 15:23 Jun-08-2006 Frequency of probe for ET of tubes - Kaveh Edalati 06:28 May-28-2006 Re: Frequency of probe for ET of tubes - Ikesh Patel 13:26 Jun-18-2006 GUI software in VB for pulser-receiver card - Satish Sharma 13:39 May-27-2006 Re-calibration of EMCOL 6K Portable Current Flow Magnetic Particle Inspection Unit - Azhar Jamil 07:58 May-26-2006 Re: Re-calibration of EMCOL 6K Portable Current Flow Magnetic Particle Inspection Unit - Nigel 16:59 May-27-2006 Re: Re-calibration of EMCOL 6K Portable Current Flow Magnetic Particle Inspection Unit - mandar vinze 12:51 Jun-07-2006 Differance between Ferrite magnetic permeability - Ranjeet singh 05:48 May-24-2006 Re: Differance between Ferrite magnetic permeability - Linas Svilanis 11:32 May-26-2006 Re: Differance between Ferrite magnetic permeability - John Brunk 22:53 May-30-2006 Electric field strength - Ed Ginzel 18:11 May-21-2006 Re: Electric field strength - Changqing Lee 23:18 May-22-2006 Re: Electric field strength tester - nondyebo mshilita 10:02 Sep-19-2006 inspection methodes for pipe line has been working over pressure - daniel 10:16 May-21-2006 Re: inspection methodes for pipe line has been working over pressure - John O'Brien 11:14 May-23-2006 Re: inspection methodes for pipe line has been working over pressure - Robert Davis 08:46 May-29-2006 Re: inspection methodes for pipe line has been working over pressure - Rich Roberts (Quest TruTec) 18:10 May-22-2006 Suitable printer for Magnaflux Eddycurrent Equipment ED810 - Ramakrishnan.S 18:41 May-20-2006 Ferrite Measurement in Reformer catalyst tube material Manurite 36X - ranjeet singh 11:47 May-19-2006 Wiring diagram for Magnaflux Model KCH-3D 1957 - David Hermanutz 18:29 May-16-2006 Underground measurement without excavation - Bardia Emami 15:37 May-16-2006 Re: Underground measurement without excavation - Ernst Niederleithinger 20:27 Jun-16-2006 Re: Underground measurement without excavation - Shilla 09:27 Jun-14-2006 MPI of Steam Turbines - Azhar Jamil 11:42 May-16-2006 Re: MPI of Steam Turbines: Some more information - Azhar Jamil 12:12 May-18-2006 Re: MPI of Steam Turbines - P V SASTRY 09:12 May-17-2006 Re: MPI of Steam Turbines - Simon Amallraja 19:18 May-17-2006 Subsea Crack Detection by ROV - Stuart Ogilvie 18:23 May-05-2006 Re: Subsea Crack Detection by ROV - Manfred Ronald Richter 23:37 Jul-02-2006 Re: Subsea Crack Detection by ROV - Peter Philipp 21:40 Jul-01-2006 Re: Subsea Crack Detection by ROV - J. Mark Davis 13:19 Jul-03-2006 Re: Subsea Crack Detection by ROV - John Turner 14:35 Jul-04-2006 Re: Subsea Crack Detection by ROV - Simon Amallraja 18:42 May-08-2006 Variance in ECT results during tube inspection of stripper - ranjeet singh 12:37 May-05-2006 Re: Variance in ECT results during tube inspection of stripper - Ikesh Patel 13:32 Jun-18-2006 Re: Variance in ECT results during tube inspection of stripper - Ranjeet singh 09:45 Jun-30-2006 Re: Variance in ECT results during tube inspection of stripper - Joe Buckley 15:56 May-06-2006 Re: Variance in ECT results during tube inspection of stripper - Ranjeet 06:17 May-08-2006 Holiday Test - Artificial Pinhole - Woo Wing Keat 05:10 May-03-2006 DICONDE image - tushar 10:00 May-02-2006 Ceramic Block - CHARLIE TOH 07:46 Apr-28-2006 Reference radiographs, castings - Norman Thomsen 11:08 Apr-27-2006 scan center mass - mark 07:03 Apr-27-2006 EMATs - paper - M.eskandarzade 16:42 Apr-26-2006 Inspection of Reformer tubes in H2 generation units - rpbhan 14:52 Apr-24-2006 Re: Inspection of Reformer tubes in H2 generation units - Jayapal 06:56 Jul-29-2006 Re: Inspection of Reformer tubes in H2 generation units - Brian Shannon 14:09 Apr-29-2006 Re: Inspection of Reformer tubes in H2 generation units - Jason Taylor 08:30 Apr-27-2006 Re: Inspection of Reformer tubes in H2 generation units - Rich Roberts 15:46 Apr-27-2006 Re: Inspection of Reformer tubes in H2 generation units - Rich Roberts 23:52 Apr-26-2006 Re: Inspection of Reformer tubes in H2 generation units - Ikesh Patel 13:39 Jun-18-2006 Re: Inspection of Reformer tubes in H2 generation units - SUNIL BIRLA 15:38 May-06-2006 Re: Inspection of Reformer tubes in H2 generation units - Brian Shannon 06:25 May-10-2006 Re: Inspection of Reformer tubes in H2 generation units - Rich Roberts 18:24 May-08-2006 rotary hole inspection for corrosion - S. Thomson 08:09 Apr-22-2006 Re: rotary hole inspection for corrosion - James Doyle 16:59 Apr-23-2006 Quenching of Alloy Steel - K . Anandam 09:40 Apr-20-2006 Selectable PRF feature - Abhishek 12:15 Apr-18-2006 Re: Selectable PRF feature - Mark potter 16:58 Apr-18-2006 Re: Selectable PRF feature - Hermann Wüstenberg 22:26 Apr-20-2006 Re: Selectable PRF feature - Thomas Murphy 19:36 Apr-20-2006 Weld inspection using AWS - Abhishek 12:14 Apr-18-2006 P-S- numbers - abdul 13:49 Apr-17-2006 IR-192 for High Thickness - Mohiuddin 03:22 Apr-15-2006 Re: IR-192 for High Thickness - John Brunk 17:22 Apr-17-2006 Re: IR-192 for High Thickness - Daniel H Rice 08:04 Apr-16-2006 Heat Exchanger tube inspection - Nigel 11:05 Apr-14-2006 Re: Heat Exchanger tube inspection - Philippe Beaubeau 11:11 Apr-19-2006 Re: Heat Exchanger tube inspection - M. Moeini 16:57 Apr-18-2006 Re: Heat Exchanger tube inspection - Ingo Becker 12:06 Apr-18-2006 Re: Heat Exchanger tube inspection - Andreas Boenisch 15:18 Apr-14-2006 ut flaws. - tomas perez a. 04:18 Apr-13-2006 Re: ut flaws. - George Pherigo 16:49 Apr-14-2006 Re: ut flaws. - fabio mussa 15:26 Apr-13-2006 Re: ut flaws. - Martin Peacock 14:21 Apr-13-2006 Re: ut flaws. - Nigel 05:53 Apr-13-2006 Water in Pipe-in-Pipe - Paul Moore 14:45 Apr-11-2006 Re: Water in Pipe-in-Pipe - Ed Ginzel