Forum Technical Discussions Re: hydrophilic remover Posted by: DJ Kallhof (PID_1317), E-mail: Address, on May 10, 2008 at 15:21 : In Reply to: hydrophilic remover posted by : diego on May 09, 2008 at 18:05: Whether you are using a 5% spray or a 20% dip application, once the intended dilution of the emulsifier has been diluted further by spraying or dipping with fresh water, the emulsification process has been rendered ineffective. ----------- Start Original Message ----------- : hi, I just want to ask regarding the effectiveness of hydrophilic remover, according to military manual once that the part after you remove from hydrophilc remover the emulsification stop but the level 3 said once you remove the part from hydrophilic remover the action never stop, the hydrophilic remover action is dillution not diffusion like lipophilic emusifier, which one is correct? : tnx! ------------ End Original Message ------------ Follow Ups: Post a Followup: Name: E-Mail: Subject: Comments: ----------- Start Original Message ----------- : Whether you are using a 5% spray or a 20% dip application, once the intended dilution of the emulsifier has been diluted further by spraying or dipping with fresh water, the emulsification process has been rendered ineffective. : : hi, I just want to ask regarding the effectiveness of hydrophilic remover, according to military manual once that the part after you remove from hydrophilc remover the emulsification stop but the level 3 said once you remove the part from hydrophilic remover the action never stop, the hydrophilic remover action is dillution not diffusion like lipophilic emusifier, which one is correct? : : tnx! ------------ End Original Message ------------ Optional Link URL: Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP Page Title: is important! Optional Image URL: http://www....gif Attention! Please click the button only once. This may take a moment to process Forum Technical Discussions Help