Forum Technical Discussions Re: NDE selection Posted by: MIchel Couture (PID_2805), E-mail: Address, on May 11, 2008 at 00:24 : In Reply to: NDE selection posted by : Marco , E-mail: Address, on May 10, 2008 at 01:35 : ----------- Start Original Message ----------- : Hi, I would be extremely grateful if someone could point me to a good reference in terms of selection of a particular NDE method... : what do you use for fasteners? : what do you use for composite panels? : etc etc : either a book or a mil spec for nde selection criteria would be perfect : thanks : marco ------------ End Original Message ------------ Hi Marco, I'm sorry, but I don't think that such book exist. You have many variables and you are not saying what you are looking for. There is numerous Codes and Specifications which will guide you toward a specific inspection and even then, you may inspect the part using various method. The only book that come to mind is one that would give you an overview of what NDT is all about and what are the limitation of each method. One of these books is the Metals Handbook Desk Edition from the American Society of Material and there are many others. The best thing is to contact a reputable NDT Service company in your area, explain your situation and see what they suggest. You know there is more than one way to skin a cat!!! Cheerios, Michel Follow Ups: Re: NDE selection S.V.Swamy 07:25 Jun-06-2008 (0) Post a Followup: Name: E-Mail: Subject: Comments: ----------- Start Original Message ----------- : : Hi, I would be extremely grateful if someone could point me to a good reference in terms of selection of a particular NDE method... : : what do you use for fasteners? : : what do you use for composite panels? : : etc etc : : either a book or a mil spec for nde selection criteria would be perfect : : thanks : : marco : : Hi Marco, : I'm sorry, but I don't think that such book exist. You have many variables and you are not saying what you are looking for. There is numerous Codes and Specifications which will guide you toward a specific inspection and even then, you may inspect the part using various method. : The only book that come to mind is one that would give you an overview of what NDT is all about and what are the limitation of each method. One of these books is the Metals Handbook Desk Edition from the American Society of Material and there are many others. : The best thing is to contact a reputable NDT Service company in your area, explain your situation and see what they suggest. You know there is more than one way to skin a cat!!! : Cheerios, : Michel ------------ End Original Message ------------ Optional Link URL: Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP Page Title: is important! Optional Image URL: http://www....gif Attention! Please click the button only once. This may take a moment to process Forum Technical Discussions Help