Forum Technical Discussions Re: Laser optic Tube inspection Posted by: Rich Roberts (PID_163), E-mail: Address, on May 12, 2008 at 15:28 : In Reply to: Laser optic Tube inspection posted by : mj , E-mail: Address, on May 10, 2008 at 10:49 : Dear Sir, I would be happy to provide you with full details relating to the use of LOTIS (Laser Optic Tube Inspection System) if you can elaborate on your exact needs. In the mean time, here some key strengths of the technology which you should be aware of: - laser depth measuring accuracy of +/-0.05mm (0.002”) - pit diameter resolution accuracy of +/-0.25mm (0.010”) - capable of inspecting 100% of a 12M (40’) long tube in 2.6 minutes - Has been applied globally to inspect “both” Heater Coil and Reformer tubes. - Has been successfully applied to inspect over 150,000 Steam Reformer tubes Regards, Rich RichardR@QuestTruTec.com Quest TruTec Follow Ups: Post a Followup: Name: E-Mail: Subject: Comments: ----------- Start Original Message ----------- : Dear Sir, : I would be happy to provide you with full details relating to the use of LOTIS (Laser Optic Tube Inspection System) if you can elaborate on your exact needs. In the mean time, here some key strengths of the technology which you should be aware of: : - laser depth measuring accuracy of +/-0.05mm (0.002”) : - pit diameter resolution accuracy of +/-0.25mm (0.010”) : - capable of inspecting 100% of a 12M (40’) long tube in 2.6 minutes : - Has been applied globally to inspect “both” Heater Coil and Reformer tubes. : - Has been successfully applied to inspect over 150,000 Steam Reformer tubes : Regards, Rich : RichardR@QuestTruTec.com ------------ End Original Message ------------ Optional Link URL: Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP Page Title: is important! Optional Image URL: http://www....gif Attention! Please click the button only once. This may take a moment to process Forum Technical Discussions Help