Forum Technical Discussions Re: Ground penetration radar Posted by: tj (PID_3627), E-mail: Address, on May 30, 2008 at 12:06 : In Reply to: Ground penetration radar posted by : Cholachat , E-mail: Address, on May 30, 2008 at 07:26 : ----------- Start Original Message ----------- : Can we use GPR to measure the stiffness of the material i.e. modulus? ------------ End Original Message ------------ Hello, Although new signal analysis software are developed constantly, I am not aware of this application of GPR currently. Better to stick with shear wave spectral analysis. This method will yield accurate results for uniform layers. Hope it helps, TJ Follow Ups: Post a Followup: Name: E-Mail: Subject: Comments: ----------- Start Original Message ----------- : : Can we use GPR to measure the stiffness of the material i.e. modulus? : Hello, : Although new signal analysis software are developed constantly, I am not aware of this application of GPR currently. Better to stick with shear wave spectral analysis. This method will yield accurate results for uniform layers. : Hope it helps, : TJ ------------ End Original Message ------------ Optional Link URL: Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP Page Title: is important! Optional Image URL: http://www....gif Attention! Please click the button only once. This may take a moment to process Forum Technical Discussions Help