Forum Technical Discussions Re: TWI UT Beam Plotter Posted by: Neil Burleigh (PID_1443), E-mail: Address, on June 02, 2008 at 01:10 : In Reply to: TWI UT Beam Plotter posted by : mj , E-mail: Address, on June 01, 2008 at 09:01 : ----------- Start Original Message ----------- : dear friends some one know about the beam plotter? iam actualy blind about this.can soem help me to find out what it is and what's the use and approx. price for it? ------------ End Original Message ------------ It is the SANDT flaw location slide rule or beam plotter. You should be able to source it through your local NDT Equipment Supply company or you can go direct to The Welding Institute in the UK Regards Neil Follow Ups: Re: TWI UT Beam Plotter arnaldo de frança 00:56 Jul-07-2008 (0) Post a Followup: Name: E-Mail: Subject: Comments: ----------- Start Original Message ----------- : : dear friends some one know about the beam plotter? iam actualy blind about this.can soem help me to find out what it is and what's the use and approx. price for it? : It is the SANDT flaw location slide rule or beam plotter. You should be able to source it through your local NDT Equipment Supply company or you can go direct to The Welding Institute in the UK : Regards : Neil ------------ End Original Message ------------ Optional Link URL: Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP Page Title: is important! Optional Image URL: http://www....gif Attention! Please click the button only once. This may take a moment to process Forum Technical Discussions Help