Forum Technical Discussions ASME SA 435 vs SA 578 Posted by: mustafa GONULAL (PID_3636), E-mail: Address, on June 04, 2008 at 16:48 : Dear Specialists, ASME SA 435 and SA 578 code requires straigth beam examination of carbon steel plates greater than 12mm. SA 435 and SA 578 Level B hvae the same acceptance criteria. If a plate has been inspected in acc. with SA 578 Level B, and the code requires SA 435 inspection. Is there any Code interpretetion or experience with ASME Code work? Follow Ups: Re: ASME SA 435 vs SA 578 Manfred Richter 18:48 Jun-04-2008 (1) Re: ASME SA 435 vs SA 578 mustafa GONULAL 08:28 Jun-05-2008 (0) Post a Followup: Name: E-Mail: Subject: Comments: ----------- Start Original Message ----------- : Dear Specialists, : ASME SA 435 and SA 578 code requires straigth beam examination of carbon steel plates greater than 12mm. SA 435 and SA 578 Level B hvae the same acceptance criteria. : If a plate has been inspected in acc. with SA 578 Level B, and the code requires SA 435 inspection. Is there any Code interpretetion or experience with ASME Code work? ------------ End Original Message ------------ Optional Link URL: Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP Page Title: is important! Optional Image URL: http://www....gif Attention! Please click the button only once. This may take a moment to process Forum Technical Discussions Help