Forum Technical Discussions Re: Thickness measurment Posted by: mustafa GONULAL (PID_3636), E-mail: Address, on June 10, 2008 at 13:17 : In Reply to: Re: Thickness measurment posted by : S.V.Swamy , E-mail: Address, on June 10, 2008 at 12:46 : ----------- Start Original Message ----------- : : Hi, Im seeking the best option for the thickness meaturment of the the sheet metals. could you please any one point me to the variuse type of thickness meaturment methods? : : in this way, I can study them and find the best one for my case : : Best Regards : : Mehdi : Thickness can be measured by several techniques, but Pulse-echo technique using high frequency ultrasonic waves is almost industry standard. The most optimal method depends on your actual application. If you need to measure the sheet online as it is being produced, you would need a non-contact fast measurement technique with a feed-back control system. A simple hand held thickness gauge would be idea for static shop floor measurement. : If you define your specific application, I would be in a better position to advise you with specific recommendations. : Swamy ------------ End Original Message ------------ Hi everybody, I am suggesting GE Kraut Kramer CL5 which is showing also A-Scan screen. I am using also and it is very successfull. Follow Ups: Post a Followup: Name: E-Mail: Subject: Comments: ----------- Start Original Message ----------- : : : Hi, Im seeking the best option for the thickness meaturment of the the sheet metals. could you please any one point me to the variuse type of thickness meaturment methods? : : : in this way, I can study them and find the best one for my case : : : Best Regards : : : Mehdi : : Thickness can be measured by several techniques, but Pulse-echo technique using high frequency ultrasonic waves is almost industry standard. The most optimal method depends on your actual application. If you need to measure the sheet online as it is being produced, you would need a non-contact fast measurement technique with a feed-back control system. A simple hand held thickness gauge would be idea for static shop floor measurement. : : If you define your specific application, I would be in a better position to advise you with specific recommendations. : : Swamy : Hi everybody, : I am suggesting GE Kraut Kramer CL5 which is showing also A-Scan screen. I am using also and it is very successfull. ------------ End Original Message ------------ Optional Link URL: Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP Page Title: is important! Optional Image URL: http://www....gif Attention! Please click the button only once. This may take a moment to process Forum Technical Discussions Help