Forum Technical Discussions Re: AS 1065 Posted by: collin maloney , E-mail: Address, on July 12, 2008 at 02:56 : In Reply to: AS 1065 posted by : Charles Truskolasky , E-mail: Address, on July 10, 2008 at 19:47 : ----------- Start Original Message ----------- : Does anyone have a copy of AS 1065. Is the recording level listed in table 3.1 as Level 1, 2, or 3, the acceptance level? I have one page of the specification covering paragraphs 3.7 thru 3.8.4 and the acceptance/rejection criteria are not clear? ------------ End Original Message ------------ Charles, The levels mentioned in table 3.1 are a method of discontinuity classification based on amplitude. The acceptance criteria is that specified in the relavent product standard or purchase order. If you require a copy of AS 1065, send me an email. Regards Collin Follow Ups: Post a Followup: Name: E-Mail: Subject: Comments: ----------- Start Original Message ----------- : : Does anyone have a copy of AS 1065. Is the recording level listed in table 3.1 as Level 1, 2, or 3, the acceptance level? I have one page of the specification covering paragraphs 3.7 thru 3.8.4 and the acceptance/rejection criteria are not clear? : Charles, : The levels mentioned in table 3.1 are a method of discontinuity classification based on amplitude. The acceptance criteria is that specified in the relavent product standard or purchase order. : If you require a copy of AS 1065, send me an email. : Regards : Collin ------------ End Original Message ------------ Optional Link URL: Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP Page Title: is important! Optional Image URL: http://www....gif Attention! Please click the button only once. This may take a moment to process Forum Technical Discussions Help