Measurement very low emissivity in coatings and surfaces

[ NDT-net Forum ]
[ Follow Ups ] [ Post Followup ] [ Help ]

Measurement very low emissivity in coatings and surfaces
Posted by: Vasco Teixeira (PID_531), E-mail: vasco@fisica.uminho.pt, on March 15, 2000 at 17:42 :
Dear colleagues,
I am looking for a simple equipment that measures directly the surface emissivity of thin coatings deposited on glass, aluminium or copper. The application is for quality inspection
sputtered solar absorbers to be used in thermal collectors for water heating. At 100 degress celsius the emissivity is about 0.05. The epsilon range should be up to 0.5 or more. The IR wavelenght should be the correspondent of 100 degrees up to 500 or more.
Regards
Vasco

Follow Ups:

Post a Followup:

Name:

E-Mail:

Subject:

Comments:
: Dear colleagues, : I am looking for a simple equipment that measures directly the surface emissivity of thin coatings deposited on glass, aluminium or copper. The application is for quality inspection : sputtered solar absorbers to be used in thermal collectors for water heating. At 100 degress celsius the emissivity is about 0.05. The epsilon range should be up to 0.5 or more. The IR wavelenght should be the correspondent of 100 degrees up to 500 or more. : Regards : Vasco

Optional Link URL: Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP

Link Title: is important! Information on my Home Page

Optional Image URL: http://www....gif

Attention! Please click the button only once. This may take a moment to process
[ NDT-net Forum ] [ Help ]

Optional Link URL:	Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP
Link Title: is important!	Information on my Home Page
Optional Image URL:	http://www....gif