Forum Technical Discussions Re: COLD PIPE INSPECTIONS Posted by: Zack (PID_3271), E-mail: Address, on August 11, 2008 at 11:31 : In Reply to: COLD PIPE INSPECTIONS posted by : Warwick Leete , E-mail: Address, on August 11, 2008 at 09:03 : Please do not be confused with the term 'hot" or "cold" terminology. In IRT world hot or cold is the same thing since any object with above absolute temperature will produce heat. In this case, I would say, thermography also can be used for inspecting your chiller cold pipework as it also produce heat which will be captured by your IR imager (IR camera). Qualitatively, the thermogram (IR image) will show you something if there is any abnormal behaviour of the heat distribution ( or heat gradient)... Follow Ups: Post a Followup: Name: E-Mail: Subject: Comments: ----------- Start Original Message ----------- : Please do not be confused with the term 'hot" or "cold" terminology. In IRT world hot or cold is the same thing since any object with above absolute temperature will produce heat. In this case, I would say, thermography also can be used for inspecting your chiller cold pipework as it also produce heat which will be captured by your IR imager (IR camera). Qualitatively, the thermogram (IR image) will show you something if there is any abnormal behaviour of the heat distribution ( or heat gradient)... ------------ End Original Message ------------ Optional Link URL: Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP Page Title: is important! Optional Image URL: http://www....gif Attention! Please click the button only once. This may take a moment to process Forum Technical Discussions Help