Re: Magnetic wheels for scanner

[ NDT-net Forum ]
[ Follow Ups ] [ Post Followup ] [ Help ]

Re: Magnetic wheels for scanner
Posted by: John Pursley (PID_324), E-mail: envision@alaska.net, on March 23, 2000 at 20:51 :
In Reply to: Magnetic wheels for scanner posted by : Joerg Neubert on March 23, 2000 at 10:27:
Envision Product Design manufactures intelligent magnetic crawlers in several sizes and configurations for industrial NDT, as well as providing up-grades and refurbishing of simple UT crawlers. Dr. Joe Imlach, a magnetic specialist, designs our wheels and as a result we achieve much higher performance than by placing soft iron plates on the sides of toroidal magnets. We built custom magnetic wheels, with or without integrated bearings and gears, in a broad range of diameters (12mm to 100mm) with attachment strengths from 2 kg to over 200 kg per wheel. We would be happy to quote your wheels if you can provide the needed details.
John Pursley
: We are about to remodel our UT-scanners for use at ferritic surfaces. The wheels shall be driven by magnetic wheels (diameter ~45mm). The question is where to get these wheels. Someone who know about such offers please contact me.
: Joerg Neubert

Digital radioscopic imaging and robotic crawlers.

Follow Ups:

Post a Followup:

Name:

E-Mail:

Subject:

Comments:
: Envision Product Design manufactures intelligent magnetic crawlers in several sizes and configurations for industrial NDT, as well as providing up-grades and refurbishing of simple UT crawlers. Dr. Joe Imlach, a magnetic specialist, designs our wheels and as a result we achieve much higher performance than by placing soft iron plates on the sides of toroidal magnets. We built custom magnetic wheels, with or without integrated bearings and gears, in a broad range of diameters (12mm to 100mm) with attachment strengths from 2 kg to over 200 kg per wheel. We would be happy to quote your wheels if you can provide the needed details. : John Pursley : : We are about to remodel our UT-scanners for use at ferritic surfaces. The wheels shall be driven by magnetic wheels (diameter ~45mm). The question is where to get these wheels. Someone who know about such offers please contact me. : : Joerg Neubert

Optional Link URL: Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP

Link Title: is important! Information on my Home Page

Optional Image URL: http://www....gif

Attention! Please click the button only once. This may take a moment to process
[ NDT-net Forum ] [ Help ]

Optional Link URL:	Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP
Link Title: is important!	Information on my Home Page
Optional Image URL:	http://www....gif