Re: Magnetic wheels for scanner

[ NDT-net Forum ]
[ Follow Ups ] [ Post Followup ] [ Help ]

Re: Magnetic wheels for scanner
Posted by: andy cunningham (PID_533), E-mail: andyshome8@hotmail.com, on March 23, 2000 at 23:25 :
In Reply to: Magnetic wheels for scanner posted by : Joerg Neubert on March 23, 2000 at 10:27:
: We are about to remodel our UT-scanners for use at ferritic surfaces. The wheels shall be driven by magnetic wheels (diameter ~45mm). The question is where to get these wheels. Someone who know about such offers please contact me.
: Joerg Neubert
do the wheels need to be magnetic?
wouldn't a magnetic plate suspended 0.5mm gap from test surfave

Follow Ups:

Post a Followup:

Name:

E-Mail:

Subject:

Comments:
: : We are about to remodel our UT-scanners for use at ferritic surfaces. The wheels shall be driven by magnetic wheels (diameter ~45mm). The question is where to get these wheels. Someone who know about such offers please contact me. : : Joerg Neubert : do the wheels need to be magnetic? : wouldn't a magnetic plate suspended 0.5mm gap from test surfave

Optional Link URL: Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP

Link Title: is important! Information on my Home Page

Optional Image URL: http://www....gif

Attention! Please click the button only once. This may take a moment to process
[ NDT-net Forum ] [ Help ]

Optional Link URL:	Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP
Link Title: is important!	Information on my Home Page
Optional Image URL:	http://www....gif