Forum Technical Discussions      Re: ASME Code Case 2235 Qualification blocks Posted by: mustafa GONULAL (PID_3636), E-mail: Address, on August 27, 2008 at 10:49 : In Reply to: Re: ASME Code Case 2235 Qualification blocks posted by : mj , E-mail: Address, on August 26, 2008 at 10:08 : Dear peers, I am drawing and producing calibration and qualification blocks over 4 years. If you want to know more detail contact with me via e-mail. ----------- Start Original Message ----------- : Dear Friend, as per code case 2235-09 qualification block shall be prepared by welding or HIP and ahll contain 3 flaws( it maybe a diffect or notch/side drilled hole. the diffrence between both calibration and qualification block is, one made just in a plate and other in a welding, also usualy if u make a small thickness qualificatin block during welding u can keep some welding rod inside and weld. also you can keep a RT report for the block. iam sure flaw maybe a natural defect or artificial!!!! always iam making this kind of blocks : Please let me know others comment. if iam not right please respond. : mj : : : Could anyone tell me where can I have the UT qualification/demonstration blocks made to ASME Code case 2235? The flaws are supposed to be actual flaws generated by welding. : : Thks! ------------ End Original Message ------------ Follow Ups: Re: ASME Code Case 2235 Qualification blocks Michael Moles 02:44 Aug-28-2008 (4) Re: ASME Code Case 2235 Qualification blocks mj 09:04 Aug-30-2008 (3) Re: ASME Code Case 2235 Qualification blocks EC 10:09 Sep-10-2008 (2) Re: ASME Code Case 2235 Qualification blocks Nigel Armstrong 11:17 Sep-10-2008 (1) Re: ASME Code Case 2235 Qualification blocks David Mackintosh 18:54 Dec-12-2008 (0) Post a Followup: Name: E-Mail: Subject: Comments: ----------- Start Original Message ----------- : Dear peers, : I am drawing and producing calibration and qualification blocks over 4 years. If you want to know more detail contact with me via e-mail. : : Dear Friend, as per code case 2235-09 qualification block shall be prepared by welding or HIP and ahll contain 3 flaws( it maybe a diffect or notch/side drilled hole. the diffrence between both calibration and qualification block is, one made just in a plate and other in a welding, also usualy if u make a small thickness qualificatin block during welding u can keep some welding rod inside and weld. also you can keep a RT report for the block. iam sure flaw maybe a natural defect or artificial!!!! always iam making this kind of blocks : : Please let me know others comment. if iam not right please respond. : : mj : : : : : Could anyone tell me where can I have the UT qualification/demonstration blocks made to ASME Code case 2235? The flaws are supposed to be actual flaws generated by welding. : : : Thks! ------------ End Original Message ------------ Optional Link URL: Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP Page Title: is important! Optional Image URL: http://www....gif Attention! Please click the button only once. This may take a moment to process Forum Technical Discussions Help