Epoxy-filled EDM Notches for MT

[ NDT-net Forum ]
[ Follow Ups ] [ Post Followup ] [ Help ]

Epoxy-filled EDM Notches for MT
Posted by: Phil Herman Jr. (PID_311), E-mail: philjr@phtool.com, on April 03, 2000 at 20:45 :
PH Tool manufactures NDT Reference Standards and Test Blocks. We have a need for epoxy-filling of narrow (0.001" to 0.005" wide) EDM notches in Mag Particle standards in order to prevent mechanical holding of the indicating medium. We are searching for an epoxy that does NOT naturally flouresce under a blacklight. Does anyone have a suggestion for such an epoxy?

NDT Reference Standards and Test Blocks

Follow Ups:

Re: Epoxy-filled EDM Notches for MT Dent McIntyre 18:28 4/05/2000 (1)

Re: Epoxy-filled EDM Notches for MT Phil Herman Jr. 22:11 4/05/2000 (0)

Post a Followup:

Name:

E-Mail:

Subject:

Comments:
: PH Tool manufactures NDT Reference Standards and Test Blocks. We have a need for epoxy-filling of narrow (0.001" to 0.005" wide) EDM notches in Mag Particle standards in order to prevent mechanical holding of the indicating medium. We are searching for an epoxy that does NOT naturally flouresce under a blacklight. Does anyone have a suggestion for such an epoxy?

Optional Link URL: Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP

Link Title: is important! Information on my Home Page

Optional Image URL: http://www....gif

Attention! Please click the button only once. This may take a moment to process
[ NDT-net Forum ] [ Help ]

Optional Link URL:	Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP
Link Title: is important!	Information on my Home Page
Optional Image URL:	http://www....gif