Forum Technical Discussions      Re: Inspection of Furnace Radiant Tubes Posted by: Rich Roberts (PID_163), E-mail: Address, on September 08, 2008 at 16:37 : In Reply to: Re: Inspection of Furnace Radiant Tubes posted by : Qaisar , E-mail: Address, on September 06, 2008 at 05:36 : Good Day Mr. Qaisar Abbas, The combined use of LOTIS and LifeQuest-Reformer can provide both inspection and remaining life calculations for the radiant tubes in your Steam Reformer. LOTIS has been applied as a reliable reformer tube inspection program for well over a decade, with +150,000 tubes inspected to date. LifeQuest-Reformer has also been applied to calculate remaining life assessments on reformer tubes. You can contact the senior metallurgist, Charles Thomas in charge of these programs at C.Thomas@QuestReliability.com. Regards, Rich ----------- Start Original Message ----------- : Dear All, : In continuation with my following massage, I want to know the means of calucating the remaining life calculation of Furnace Radiant Tubes. : How we can assess the remaining life of the tubes? : regards : : : Dear All, : : I want to get a "benchmark inspection data" for the inspection techniques employed on Furnace Radiant / Catalyst Tubes in chemical industries. : : For starting , here is the data at our plant: : : Company: Engro Chemical Pakistan Limited : : Furnace Type: Terrase type Reforming Furnace : : Furnace Make: Foster Wheeler : : Inspection Type: Ultrasonic (Conam) for creep detection : : You all are requested to please share your data with me. : : Hoping for your cooperation, : : Regards : : Qaisar Abbas : : Inspection Engineer : : qabbas@engro.com ------------ End Original Message ------------ Quest TruTec Follow Ups: Post a Followup: Name: E-Mail: Subject: Comments: ----------- Start Original Message ----------- : Good Day Mr. Qaisar Abbas, : The combined use of LOTIS and LifeQuest-Reformer can provide both inspection and remaining life calculations for the radiant tubes in your Steam Reformer. LOTIS has been applied as a reliable reformer tube inspection program for well over a decade, with +150,000 tubes inspected to date. LifeQuest-Reformer has also been applied to calculate remaining life assessments on reformer tubes. You can contact the senior metallurgist, Charles Thomas in charge of these programs at C.Thomas@QuestReliability.com. : Regards, Rich : : : Dear All, : : In continuation with my following massage, I want to know the means of calucating the remaining life calculation of Furnace Radiant Tubes. : : How we can assess the remaining life of the tubes? : : regards : : : : : Dear All, : : : I want to get a "benchmark inspection data" for the inspection techniques employed on Furnace Radiant / Catalyst Tubes in chemical industries. : : : For starting , here is the data at our plant: : : : Company: Engro Chemical Pakistan Limited : : : Furnace Type: Terrase type Reforming Furnace : : : Furnace Make: Foster Wheeler : : : Inspection Type: Ultrasonic (Conam) for creep detection : : : You all are requested to please share your data with me. : : : Hoping for your cooperation, : : : Regards : : : Qaisar Abbas : : : Inspection Engineer : : : qabbas@engro.com ------------ End Original Message ------------ Optional Link URL: Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP Page Title: is important! Optional Image URL: http://www....gif Attention! Please click the button only once. This may take a moment to process Forum Technical Discussions Help