Forum Technical Discussions      Re: NDT for Leaking Expansion Bellows Posted by: John O'Brien , E-mail: Address, on September 11, 2008 at 13:48 : In Reply to: Re: NDT for Leaking Expansion Bellows posted by : Qaisar Abbas , E-mail: Address, on September 09, 2008 at 04:50 : Qaisar if you have access to a GasFind IR by FLIR you may find sensitivity better as it will identify specific hydrocarbon gases without the same degree of thermal difference needed on a standard IR camera. We use these now extensively with great success. Follow Ups: Post a Followup: Name: E-Mail: Subject: Comments: ----------- Start Original Message ----------- : Qaisar : if you have access to a GasFind IR by FLIR you may find sensitivity better as it will identify specific hydrocarbon gases without the same degree of thermal difference needed on a standard IR camera. We use these now extensively with great success. ------------ End Original Message ------------ Optional Link URL: Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP Page Title: is important! Optional Image URL: http://www....gif Attention! Please click the button only once. This may take a moment to process Forum Technical Discussions Help