Forum Technical Discussions      Radiography interpratation Technique-IQI selection Posted by: tuan adnan , E-mail: Address, on September 20, 2008 at 05:00 : hello guys... i have some confusion. 1- when interprect elips film.. in order to calculate the sensitivity do we used single wall or 2t .. and is the thicness based on parent material or added with capping ..for example t =4 mm and capping 1.5 as percode... what is the requirement for IQI used.. will it be group A or group B for elips film 2- also on DWSI... for sensity calculation do we used single t or 2t... in order to make or used IQI selection.. please advise.. thank you in advance. Follow Ups: Re: Radiography interpratation Technique-IQI selection Collin Maloney 05:55 Sep-20-2008 (1) Re: Radiography interpratation Technique-IQI selection Juan Amado 16:13 Sep-20-2008 (0) Re: Radiography interpratation Technique-IQI selection Collin Maloney 05:54 Sep-20-2008 (0) Post a Followup: Name: E-Mail: Subject: Comments: ----------- Start Original Message ----------- : hello guys... : i have some confusion. : 1- when interprect elips film.. in order to calculate the sensitivity do we used single wall or 2t .. and is the thicness based on parent material or added with capping ..for example t =4 mm and capping 1.5 as percode... what is the requirement for IQI used.. will it be group A or group B for elips film : 2- also on DWSI... for sensity calculation do we used single t or 2t... in order to make or used IQI selection.. please advise.. thank you in advance. ------------ End Original Message ------------ Optional Link URL: Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP Page Title: is important! Optional Image URL: http://www....gif Attention! Please click the button only once. This may take a moment to process Forum Technical Discussions Help