Forum Technical Discussions      Re: Corrosion C-scan mapping instrument - Pls help! Posted by: John O'Brien , E-mail: Address, on October 23, 2008 at 11:25 : In Reply to: Corrosion C-scan mapping instrument - Pls help! posted by : Tran Woo , E-mail: Address, on October 21, 2008 at 18:55 : ----------- Start Original Message ----------- : Hello everybody, : I have demand to buy C scan corossion maping UT phased array instrument to corrosion assessment and I am looking for good instrument. Anyone help me what instrument is suitable with my application? : Thanks and regards, : Tran Woo : Korea National Petroleum Corp ------------ End Original Message ------------ Your message is a little confusing as you are talking about corrosion mapping and phased array. You may not need a phased array approach to conduct good C-Scan mapping. A lot will depend on what you actually want to C-Scan map in terms of configurations and scanning. If its in situ corrosion mapping of large areas such as pipes, vessels tanks and pipelines there are an array of systems available all good but with limitations and advantages. Companies such as NDT Automation, Force Institute, GE Inspection the list could be endless, you will find many of them advertising on this site. I suggest you sit down and write a one page key points specification of what you want to do with the system immediately as essential to have items and then a secondary list of what you might want to do in the future with the system and then send to a list of suppliers to see what they offer in terms of your specific requirements. Follow Ups: Post a Followup: Name: E-Mail: Subject: Comments: ----------- Start Original Message ----------- : : Hello everybody, : : I have demand to buy C scan corossion maping UT phased array instrument to corrosion assessment and I am looking for good instrument. Anyone help me what instrument is suitable with my application? : : Thanks and regards, : : Tran Woo : : Korea National Petroleum Corp : Your message is a little confusing as you are talking about corrosion mapping and phased array. You may not need a phased array approach to conduct good C-Scan mapping. A lot will depend on what you actually want to C-Scan map in terms of configurations and scanning. : If its in situ corrosion mapping of large areas such as pipes, vessels tanks and pipelines there are an array of systems available all good but with limitations and advantages. Companies such as NDT Automation, Force Institute, GE Inspection the list could be endless, you will find many of them advertising on this site. : I suggest you sit down and write a one page key points specification of what you want to do with the system immediately as essential to have items and then a secondary list of what you might want to do in the future with the system and then send to a list of suppliers to see what they offer in terms of your specific requirements. ------------ End Original Message ------------ Optional Link URL: Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP Page Title: is important! Optional Image URL: http://www....gif Attention! Please click the button only once. This may take a moment to process Forum Technical Discussions Help