Forum Technical Discussions      Re: UT for below 8mm thk Posted by: chris s (PID_3032), E-mail: Address, on November 04, 2008 at 18:08 : In Reply to: UT for below 8mm thk posted by : gowri santhosh , E-mail: Address, on October 25, 2008 at 14:03 : ----------- Start Original Message ----------- : hi, this is santhosh : please tell me about UT for below 8mm thickness with reference code. thanks for reply. ------------ End Original Message ------------ I would suggest that you contact a level III who is knowledgeable in regards to phased array, make appropriate mock-ups and test your techs accordingly Follow Ups: Post a Followup: Name: E-Mail: Subject: Comments: ----------- Start Original Message ----------- : : hi, this is santhosh : : please tell me about UT for below 8mm thickness with reference code. thanks for reply. : I would suggest that you contact a level III who is knowledgeable in regards to phased array, make appropriate mock-ups and test your techs accordingly ------------ End Original Message ------------ Optional Link URL: Example: "http://www....html". Alternative write "http://www.ndt.net/wshop/attach/filename.htm" if you transfered a filename.htm via FTP Page Title: is important! Optional Image URL: http://www....gif Attention! Please click the button only once. This may take a moment to process Forum Technical Discussions Help